Cordless Power Tools

The MILWAUKEE® M12™ 23 Gauge Pin Nailer Kit features the most compact cordless pin nailer, combining precision and power to deliver the performance that professional carpenters and remodelers demand, without the hassle of a compressor hose or gas cartridge. The 23 gauge pin nailer provides unmatched productivity and accessibility into tight spaces and confined corners with a lightweight, ergonomic design. The nitrogen air spring mechanism allows the nailer to consistently sink pin nails at proper depth into hard or softwoods while leaving small, clean nail holes. The double-action trigger and non-marring precision point tip allow for sequential driving and accurate pin placement into delicate trim pieces. The dry-fire lockout feature prevents misfires and workpiece damage. The M12™ Pin Nailer drives 23-gauge headless pin nails ranging in length from 1/2" to 1-3/8" and features all-day run time with up to 750 pin nails per charge when paired with an M12™ REDLITHIUM™ CP1.5 battery pack. This battery-powered pin nailer also features a magazine reload indicator, tool-free drive depth adjustment, reversible belt clip, LED light, battery fuel gauge, secondary work contact tip, and carries an industry-leading 3-year limited power tool warranty. This 23-gauge pin nailer kit includes (1) M12™ 23GA Pin Nailer, (1) M12™ Charger, (1) M12™ REDLITHIUM CP1.5Ah Battery Pack, and a Contractor Bag.

The MILWAUKEE® M12™ Spot Light delivers up to 750 lumens of TRUEVIEW™ High Definition Output, making it the most portable, high-performing spotlight. This hand-held spotlight features high and low output modes of operation for versatile beam distance control and added clarity in closer situations. The rechargeable LED spotlight features a beam distance of 700 Yards, to spot objects and areas a long-distance away. A strobe mode for use in safety situations and the spotlight is impact and water resistant to survive professional use. The Milwaukee M12™ LED spotlight is backed by a limited lifetime LED warranty, the LEDs never need to be replaced.

This 20V MAX 4-Tool Combo Kit with 5 Ah batteries features our Brushless 1/2 in. Mid-Range Impact Wrench. It delivers up to 330 ft-lbs of fastening torque and 600 ft-lbs of breakaway torque with a lightweight, ergonomic design. The Brushless 1/4 in. 3-Speed Impact Driver is compact for working in tight spaces, helping to increase productivity. 3 integrated LED worklights make it ideal for dimly lit spots. The 4-1/2 in. Grinder features convenient Quick-Change wheel release and delivers high power for tough cutting and grinding. The included bright LED flashlight illuminates your work area with 110 lumens.

The MILWAUKEE® M18 FUEL™ HOLE HAWG® 1/2" Right Angle Drill provides electricians and professional tradesmen with the fastest rough-ins and lightest right-angle drill. They've redesigned it with an upgraded POWERSTATE™ Brushless Motor and enhanced REDLINK PLUS™ Intelligence electronics. The next generation of the M18 FUEL™ HOLE HAWG® delivers increased power and speed. Pairing the new M18 FUEL™ HOLE HAWG® with the M18™ REDLITHIUM™ HIGH OUTPUT™ 6.0AH Batteries (sold separately), gives the power to drill up to 220 7/8" holes on a single charge to increase productivity and eliminate downtime. It's lightweight and compact size makes this M18 FUEL™ HOLE HAWG® the best right angle drill for electricians, plumbers, and carpenters.

The MILWAUKEE® M18™ FUEL™ w/ ONE-KEY™ High Torque 3/4" Impact Wrench with Friction Ring provides the Most Powerful, Most Compact, and the Most Repeatable Impact Wrench in the industry! The POWERSTATE™ Brushless motor delivers up to 1,200ft-lbs of fastening torque and 1500ft-lbs of nut-busting torque, providing users with a cordless solution that will eliminate the need for corded Impact Wrenches. The industry's most compact cordless High Torque Impact wrench at 8.59" in length allows for more access in tight spaces. MILWAUKEE® M18™ REDLITHIUM™ XC5.0 Resistant Battery Packs provide increased protection against oils, greases, and solvents. Compatible with ONE-KEY™, this is the industry's first High Torque Impact Wrench that wirelessly connects to a smartphone to Customize, Track and Manage a tool's performance and location. Tool Customization allows users to connect to the tool and access predetermined set-ups for specific fasteners and materials, or have complete control over output speed and power for the specific application at hand. Users now have a tool that delivers the most repeatable torque output in the industry. This solution will get them close to their targeted torque value, reducing the likelihood of significant under or over-torque. Users will experience less rework, less damage, and increased productivity that will get them closer to their torque target and will finish with a calibrated torque device to reach their targeted torque value.

The MILWAUKEE® M18 FUEL™ 4-1/2" / 5" Grinder Slide Switch, Lock-On is the next advancement in power and performance, generating 11A corded power, fastest cutting, and delivering up to 135 cuts per charge. The M18 FUEL™ 4-1/2" / 5" Grinder generates 11A corded power allowing completion of the toughest grinding and cutting applications, all on the M18™ cordless system. The POWERSTATE™ Brushless Motor delivers maximum sustained power and 8,500 RPM to remove material faster and increase productivity. REDLINK PLUS™ Intelligence ensures unmatched levels of performance, protection, and compatibility. The RAPIDSTOP™ Brake stops all accessories in 2 seconds or less. The M18 FUEL™ 4-1/2" / 5" Grinder includes an electronic clutch for kickback protection, as well as overload protection to maximize motor life. The M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 Batteries (not included) deliver 50% more power while running 50% cooler than our M18™ REDLITHIUM™ XC Batteries and are compatible with 200+ Tools in the M18™ System. Experience faster accessory changes and less downtime with tool-free accessory and guard adjustments while remaining fully compatible with the most common accessories in the market. The M18 FUEL™ 4-1/2" / 5" Grinder takes cordless grinders to the next level in performance and run-time.

The MILWAUKEE® M18 FUEL™ 3/8" Mid-Torque Impact Wrench w/ Friction Ring delivers the best power to weight ratio, most access in tight spaces, and faster removal speed. It provides 600 ft-lbs of nut-busting torque and only weighs 5.0 lbs, making it extremely versatile, capable of performing a wide variety of applications. Its POWERSTATE™ Brushless Motor generates the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. This battery-powered impact wrench is the most compact in its class, allowing access to stubborn fasteners in spaces where larger impact wrenches can't fit without needing to disassemble components to reach bolts. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 35 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence ensures maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™ battery pack (not included) fits M18™ tools, delivering more work per charge and more work over the life of the pack.

The Milwaukee® M12™ FUEL™ SURGE™ 1/4 in. hex hydraulic driver is the industry's first 12 Volt hydraulic impact driver. The FLUID-DRIVE™ hydraulic powertrain's hydraulic impact allows for operation up to 2X quieter with less vibration for smoother and faster driving speeds. Its compact size provides unmatched access in tight spaces and allows for easy transport on a tool belt or in a tool bag. The POWERSTATE™ brushless motor delivers up to 0-3, 000 RPM with constant power output to drive screws faster. REDLINK Plus™ intelligence prevents damage to the tool and battery caused by overloading or overheating. The cordless impact driver is compatible with all M12™ REDLITHIUM™ compact batteries or extended capacity batteries, delivering more work per charge and more work over the life of the pack. The impact driver's 4-mode drive control delivers greater control over output speed and power for greater versatility. Self-tapping screw mode reduces walking when self-tapping screws as well as reduces overdriving, breaking and stripping out screws.

The Milwaukee® M12™ FUEL™ SURGE™ 1/4 in. hex hydraulic driver is the industry's first 12 Volt hydraulic impact driver. The FLUID-DRIVE™ hydraulic powertrain's hydraulic impact allows for operation up to 2X quieter with less vibration for smoother and faster driving speeds. Its compact size provides unmatched access in tight spaces and allows for easy transport on a tool belt or in a tool bag. The POWERSTATE™ brushless motor delivers up to 0-3, 000 RPM with constant power output to drive screws faster. REDLINK Plus™ intelligence prevents damage to the tool and battery caused by overloading or overheating. The cordless impact driver is compatible with all M12™ REDLITHIUM™ compact batteries or extended capacity batteries, delivering more work per charge and more work over the life of the pack. The impact driver's 4-mode drive control delivers greater control over output speed and power for greater versatility. Self-tapping screw mode reduces walking when self-tapping screws as well as reduces overdriving, breaking and stripping out screws. In addition to the M12 FUEL™ SURGE™ 1/4 in. hex hydraulic driver, this kit includes two M12™ REDLITHIUM™ CP2.0 batteries and a contractor bag.

The MILWAUKEE® M18 FUEL™ 8 ft Concrete Pencil Vibrator Kit generates up to 1.8 peak HP, with no setup and the ability to consolidate 20 yds³ of concrete per charge. The M18 FUEL™ 8 ft Concrete Pencil Vibrator generates 1.8 Peak HP, which is three times more powerful than competitive cordless pencil vibrators for concrete, all on the M18™ Cordless System. The POWERSTATE™ Brushless Motor delivers maximum sustained power and 12,500 VPM for optimal consolidation with a variable speed trigger. REDLINK PLUS™ Intelligence ensures unmatched levels of performance and protection. The included M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery delivers 50% more power while running 50% cooler than M18™ REDLITHIUM™ XC Batteries and are compatible with 200+ tools in the M18™ System.

The MILWAUKEE® M18 FUEL™ 15 Gauge Finish Nailer provides peak productivity on the jobsite, delivering unmatched nailing performance without the hassle of a compressor and hose. Leveraging a nitrogen air spring mechanism, the 15 Gauge Finish Nailer consistently sinks nails to the required depth in hard and softwoods while leaving clean nail holes, making for repeatable results and easy filling. The nitrogen air spring mechanism, combined with Milwaukee POWERSTATE™ Brushless Motor and REDLINK PLUS™ Intelligence, delivers a pneumatic-like nailing response with zero ramp-up time from nail to nail for productive and efficient jobs. This Milwaukee cordless finish nailer features a compact and ergonomic design providing access into tight spaces where nailing is required while limiting fatigue when using the tool. When paired with an M18™ REDLITHIUM™ CP2.0 battery pack, this finish nail gun fires up to 750 nails per charge and is fully compatible with all M18™ REDLITHIUM batteries. The M18 FUEL™ 15 Gauge Finish Nailer delivers the pneumatic performance that professional carpenters and remodelers demand with finishing nails for trim, crown molding, baseboards, and more with the freedom and convenience of cordless.

The MILWAUKEE® M18 FUEL™ 2 Gallon Compact Quiet Compressor is designed for the professional carpenter and remodeler. This quiet portable air compressor is only 68dB(A), making it the quietest cordless compressor on the market, and quieter than most corded compressors. Its compact size makes it easy to transport on, around, and back off the jobsite with a low profile and stackable design. It has the run-time a professional needs to stay productive, providing up to 1,600 18ga brad nails per charge. It is compatible with all M18™ REDLITHIUM™ batteries making it easy to swap packs and keep running to finish the job.