S2K Commerce - Products Dropdown
ActionsS2K Commerce - Order Entry
ActionsLadders and Scaffolding
The T6208 Fiberglass 8 ft Twin Step Ladder offers a high performance dual HolsterTop with a paint and tool holder for convenience. The internal spreaders are heavy duty and the slip-resistant TRACTION-TRED® steps are all double riveted and knee braced. These twin stepladders allow 300 pounds per side making them ideal for one or two person jobs. The EDGE® molded brace and foot pad combination provide bracing strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.
Features
- *Energy Diffusing Geometry
- Double riveted slip-resistant TRACTION-TRED® steps
- Slip-resistant foot pads attached to the EDGE® structure
- 4 rivets attach top to each rail
- High performance dual HolsterTop paint and tool holder
- Heavy duty internal spreaders
- Maximum load per side, including person and materials, shall not exceed duty rating of ladder
- All steps are knee-braced
- EDGE® molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage
- Design for one or two-person jobs
- Every rivet backed up by metal, metal plates or washers to protect rails
Specifications
Approx. Spread | 64-1/8 in |
Size | 8 ft |
Load Capacity | 300 lbs |
Description of Top Features | 2 Paint tray slots, 6 tool holes, 2 drill holes, 2 @ quart paint can, gallon paint can, 2 parts trays |
Type | Type IA Duty Rating |
Certifications | ANSI A14.5 (2007); OSHA |
Approx. Width | 26-7/8 in |
Edge Bracing | Heavy |
Max. Standing Height | 5 ft 9 in |
Approx. Shipping Wt. Lbs. | 37 |
Reach Height | 12 ft |
Approx. Cu. Ft. Per Unit | 12.3 |
Spreader Material | Steel |
With Pail Shelf | No |
Material | Fiberglass |
Performance Rating | 4 star |
Features
- Platform height adjustable in 2 in increments for unique working heights and uneven surfaces
- 1000 lbs Load Capacity Distributed Evenly
- Protected locking pins prevent accidental release
- Deck pins secure plywood to scaffold frame
- Replacement plywood deck for SRS-72 steel rolling scaffold
Specifications
Approx. Shipping Wt. Lbs. | 32.5 |
Approx. Cu. Ft. Per Unit | 1.1 |
Features
- Sections stack easily when casters are removed
- Platform height adjustable in 2 in increments for unique working heights and uneven surfaces
- Easy one-person assembly. No tools required for quick setup and tear down
- Locking casters swivel for convenient 360-degree mobility
- Protected locking pins prevent accidental release
Specifications
Width | 29-1/2 in |
Height | 74-7/8 in |
Load Capacity | 1000 lbs |
Approx. Cu. Ft. Per Unit | 7.3 |
Depth | 73-3/4 in |
Material | Steel |
Style | Rolling Scaffold |
Approx. Shipping Wt. Lbs. | 143.5 |
The NEW PD6210 Podium Ladder offers the same reach height as a 12 ft stepladder and is ideal for working at fixed heights and is easier to maneuver than scaffolds or lifts. The extra-large platform with toe guard feels like you are standing on the ground and 4X Work Zone allows you to work facing any direction. This ladder features full aluminum bracing and a full set of rear horizontals. The LOCKTOP™ extended guardrail provides an extra point of contact and conveniently organizes tools and accessories. The newly designed EDGE360™ gives the bottom of the ladder protection from every angle with integrated rail shield, EDGE bracing and over-sized foot pads.
Features
- Extra-large platform for long standing comfort
- 300 lbs Load Capacity, Type IA Duty Rating
- All steps and two rear horizontals are knee-braced
- 4X Work Zone to reach all directions
- EDGE 360® includes an integrated rail shield, EDGE bracing and oversized foot pads
- Double riveted slip-resistant TRACTION-TRED® steps
- Back-up plates reinforce all top connectors
- Same reach height as a 12 ft stepladder
- Full set of rear horizontals spaced one per foot
- LOCKTOP™ extended guard rail securely wraps around work zone and holds an arsenal of tools
Specifications
Approx. Cu. Ft. Per Unit | 29.1 |
Type | Type IA Duty Rating |
Approx. Overall Ladder Height (Open) | 150 in |
Max. Standing Height | 10 ft |
Load Capacity | 300 lbs |
Size | 12 ft |
Platform Width | 16 in |
Height to Platform | 10 ft |
Approx. Width | 38-3/8 in |
Approx. Shipping Wt. Lbs. | 58 |
Performance Rating | 4 star |
Material | Fiberglass |
Reach Height | 16 ft |
Approx. Spread | 80-2/3 in |
Platform Depth | 19-1/2 in |
The NEW PD6208 Podium Ladder offers the same reach height as a 10 ft stepladder and is ideal for working at fixed heights and is easier to maneuver than scaffolds or lifts. The extra-large platform with toe guard feels like you are standing on the ground and 4X Work Zone allows you to work facing any direction. This ladder features full aluminum bracing and a full set of rear horizontals. The LOCKTOP™ extended guardrail provides an extra point of contact and conveniently organizes tools and accessories. The newly designed EDGE360™ gives the bottom of the ladder protection from every angle with integrated rail shield, EDGE bracing and over-sized foot pads.
Features
- 4X Work Zone to reach all directions
- Full set of rear horizontals spaced one per foot
- LOCKTOP™ extended guard rail securely wraps around work zone and holds an arsenal of tools
- Same reach height as a 10 ft stepladder
- EDGE 360® includes an integrated rail shield, EDGE bracing and oversized foot pads
- Double riveted slip-resistant TRACTION-TRED® steps
- All steps and two rear horizontals are knee-braced
- Extra-large platform for long standing comfort
- Back-up plates reinforce all top connectors
- 300 lbs Load Capacity, Type IA Duty Rating
Specifications
Reach Height | 14 ft |
Approx. Overall Ladder Height (Open) | 127 in |
Max. Standing Height | 8 ft |
Type | Type IA Duty Rating |
Approx. Spread | 68-1/5 in |
Platform Depth | 19-1/2 in |
Performance Rating | 4 star |
Size | 10 ft |
Approx. Shipping Wt. Lbs. | 47 |
Load Capacity | 300 lbs |
Material | Fiberglass |
Approx. Cu. Ft. Per Unit | 22.3 |
Platform Width | 16 in |
Height to Platform | 8 ft |
Approx. Width | 34-3/4 in |
The NEW PD6204 Podium Ladder offers the same reach height as a 6 ft stepladder and is ideal for working at fixed heights and is easier to maneuver than scaffolds or lifts. The extra-large platform with toe guard feels like you are standing on the ground and 4X Work Zone allows you to work facing any direction. This ladder features full aluminum bracing and a full set of rear horizontals. The LOCKTOP™ extended guardrail provides an extra point of contact and conveniently organizes tools and accessories. The newly designed EDGE360™ gives the bottom of the ladder protection from every angle with integrated rail shield, EDGE bracing and over-sized foot pads.
Features
- Full set of rear horizontals spaced one per foot
- Same reach height as a 6 ft stepladder
- Back-up plates reinforce all top connectors
- Extra-large platform for long standing comfort
- 300 lbs Load Capacity, Type IA Duty Rating
- EDGE 360® includes an integrated rail shield, EDGE bracing and oversized foot pads
- LOCKTOP™ extended guard rail securely wraps around work zone and holds an arsenal of tools
- 4X Work Zone to reach all directions
- All steps and two rear horizontals are knee-braced
- Double riveted slip-resistant TRACTION-TRED® steps
Specifications
Performance Rating | 4 star |
Max. Standing Height | 4 ft |
Platform Depth | 19-1/2 in |
Approx. Cu. Ft. Per Unit | 11.3 |
Height to Platform | 4 ft |
Material | Fiberglass |
Type | Type IA Duty Rating |
Reach Height | 10 ft |
Approx. Shipping Wt. Lbs. | 26.7 |
Approx. Width | 27-1/2 in |
Approx. Spread | 43-2/3 in |
Load Capacity | 300 lbs |
Approx. Overall Ladder Height (Open) | 81 in |
Size | 6 ft |
Platform Width | 16 in |
The NEW PD6206 Podium Ladder offers the same reach height as an 8 ft stepladder and is ideal for working at fixed heights and is easier to maneuver than scaffolds or lifts. The extra-large platform with toe guard feels like you are standing on the ground and 4X Work Zone allows you to work facing any direction. This ladder features full aluminum bracing and a full set of rear horizontals. The LOCKTOP™ extended guardrail provides an extra point of contact and conveniently organizes tools and accessories. The newly designed EDGE360™ gives the bottom of the ladder protection from every angle with integrated rail shield, EDGE bracing and over-sized foot pads.
Features
- Extra-large platform for long standing comfort
- Back-up plates reinforce all top connectors
- Same reach height as a 8 ft stepladder
- LOCKTOP™ extended guard rail securely wraps around work zone and holds an arsenal of tools
- Double riveted slip-resistant TRACTION-TRED® steps
- 300 lbs Load Capacity, Type IA Duty Rating
- EDGE 360® includes an integrated rail shield, EDGE bracing and oversized foot pads
- Full set of rear horizontals spaced one per foot
- 4X Work Zone to reach all directions
- All steps and two rear horizontals are knee-braced
Specifications
Approx. Overall Ladder Height (Open) | 104 in |
Approx. Width | 31-1/4 in |
Platform Depth | 19-1/2 in |
Load Capacity | 300 lbs |
Approx. Shipping Wt. Lbs. | 34.5 |
Platform Width | 16 in |
Size | 8 ft |
Max. Standing Height | 6 ft |
Material | Fiberglass |
Approx. Spread | 55-4/5 in |
Performance Rating | 4 star |
Type | Type IA Duty Rating |
Height to Platform | 6 ft |
Approx. Cu. Ft. Per Unit | 16.4 |
Reach Height | 12 ft |
The 6208 Fiberglass 8 ft Step Ladder is ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the Lock-In System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the EDGE® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
Features
- Slip-resistant foot pads attached to the EDGE® structure
- 4 rivets attach top to each front rail
- Optional manual pail shelf kit, model no. PK76-9 or automatic closing pail shelf kit model no. 76-2
- HolsterTop with Lock-In System secures tools to increase productivity
- All steps and two rear horizontals are knee-braced
- Every rivet backed up by metal, metal plates or washers to protect rails
- Back-up plates reinforce all top connectors
- Double riveted slip-resistant TRACTION-TRED® steps
- Shoulder bolt and nut on top hinge
- Heavy duty internal spreaders
- Full set of rear horizontals spaced one per foot
Specifications
With Pail Shelf | No |
Approx. Spread | 53-5/8 in |
Edge Bracing | Heavy |
Description of Top Features | Paint tray slot, can hook, Lock in accessory sockets, 2 tool holes, drill hole, p int, quart & gallon paint can, 2 parts trays, tape measure slot |
Load Capacity | 300 lbs |
Approx. Width | 26-7/8 in |
Approx. Shipping Wt. Lbs. | 30 |
Performance Rating | 4 star |
Reach Height | 12 ft |
Approx. Cu. Ft. Per Unit | 8.1 |
Material | Fiberglass |
Certifications | ANSI A14.5 (2007); OSHA |
Max. Standing Height | 5 ft 9 in |
Size | 8 ft |
Type | Type IA Duty Rating |
Spreader Material | Steel |
The 6212 Fiberglass 12 ft Step Stool is ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the Lock-In System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the EDGE® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
Features
- Shoulder bolt and nut on top hinge
- Full set of rear horizontals spaced one per foot
- Every rivet backed up by metal, metal plates or washers to protect rails
- All steps and two rear horizontals are knee-braced
- 4 rivets attach top to each front rail
- Heavy duty internal spreaders
- HolsterTop with Lock-In System secures tools to increase productivity
- Optional manual pail shelf kit, model no. PK76-9 or automatic closing pail shelf kit model no. 76-2
- Double riveted slip-resistant TRACTION-TRED® steps
- Slip-resistant foot pads attached to the EDGE® structure
- Back-up plates reinforce all top connectors
Specifications
Performance Rating | 4 star |
With Pail Shelf | No |
Certifications | ANSI A14.5 (2007); OSHA |
Type | Type IA Duty Rating |
Approx. Cu. Ft. Per Unit | 15 |
Approx. Shipping Wt. Lbs. | 49 |
Size | 12 ft |
Load Capacity | 300 lbs |
Material | Fiberglass |
Spreader Material | Steel |
Max. Standing Height | 9 ft 7 in |
Reach Height | 16 ft |
Edge Bracing | Heavy |
Approx. Width | 33-7/8 in |
Approx. Spread | 78-1/4 in |
Description of Top Features | Paint tray slot, can hook, Lock in accessory sockets, 2 tool holes, drill hole, p int, quart & gallon paint can, 2 parts trays, tape measure slot |
The 6205 Fiberglass 5 ft Step Ladder is ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the Lock-In System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the EDGE® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
Features
- Optional manual pail shelf kit, model no. PK76-9 or automatic closing pail shelf kit model no. 76-2
- Heavy duty internal spreaders
- 4 rivets attach top to each front rail
- Shoulder bolt and nut on top hinge
- Slip-resistant foot pads attached to the EDGE® structure
- Back-up plates reinforce all top connectors
- Full set of rear horizontals spaced one per foot
- HolsterTop with Lock-In System secures tools to increase productivity
- Every rivet backed up by metal, metal plates or washers to protect rails
- All steps and top rear horizontal are knee-braced
- Double riveted slip-resistant TRACTION-TRED® steps
Specifications
Max. Standing Height | 2 ft 10 in |
Material | Fiberglass |
Approx. Cu. Ft. Per Unit | 4.1 |
Edge Bracing | Heavy |
With Pail Shelf | No |
Certifications | ANSI A14.5 (2007); OSHA |
Performance Rating | 4 star |
Reach Height | 9 ft |
Spreader Material | Steel |
Size | 5 ft |
Approx. Spread | 35-1/8 in |
Approx. Width | 21-5/8 in |
Description of Top Features | Paint tray slot, can hook, Lock in accessory sockets, 2 tool holes, drill hole, p int, quart & gallon paint can, 2 parts trays, tape measure slot |
Type | Type IA Duty Rating |
Approx. Shipping Wt. Lbs. | 19 |
Load Capacity | 300 lbs |
Features
- Replacement casters for SRS-72 steel rolling scaffold
- 1000 lbs Load Capacity Distributed Evenly
- Casters lock and swivel for convenient mobility
Specifications
Approx. Cu. Ft. Per Unit | 0.26 |
Approx. Shipping Wt. Lbs. | 20 |
Features
- 1000 lbs Load Capacity Distributed Evenly
- Guard rail and toeboard kit for SRS-72 steel rolling scaffold
Specifications
Approx. Cu. Ft. Per Unit | 8.55 |
Approx. Shipping Wt. Lbs. | 70.5 |
The D6240-2 fiberglass extension ladders have non-conductive rails making these ladders ideal for working near electricity. With a duty rating of 300 pounds, the D6240-2 is durable and long lasting. The exclusive ALFLO® rung joint means TWIST-PROOF® performance on the job. The TRACTION-TRED® D rungs are slip resistant and the side rails are interlocking. The dual action feet are for use on hard or penetrable surfaces and swivel easily. The base and fly sections separate easily to use the base section as a single ladder. The durable rail shield bracket and shoe help protect the bottom of the rail. The fly section rails are pre-pierced at the top for easy field installation of accessories.
Features
- Pre-pierced holes for easy field installation of accessories
- Combination rail shield bracket and shoe with SHU-LOK® and slip-resistant pad
- Molded rung braces on bottom step for increased durability
- Interlocking Side Rails with internal rail guides on bottom of fly section securely connect rails
- Heavy Duty extruded rung locks are spring loaded to operate smoothly
- Smooth operating pulley with polyester rope
- 1-5/8 in slip-resistant TRACTION-TRED® D-rungs
- Base and fly separate easily to use base section as single ladder
- Exclusive ALFLO® rung joint means TWIST-PROOF® performance
- Two sets of external guides at top of base section securely interlock rails
- Mar-resistant molded end caps
Specifications
Material | Fiberglass |
Load Capacity | 300 lbs |
Approx. Shipping Wt. Lbs. | 88.5 |
Reach Height | 37 ft |
Max Working Length | 35 ft |
Rung Type | D-Rung |
Number of Sections | 2 |
Style | Multi Section |
Type | Type IA Duty Rating |
Size | 40 ft |
Approx. Cu. Ft. Per Unit | 17 |
Approx. Closed Length | 20 ft |
Foot Material | Slip-resistant pad |
Performance Rating | 4 star |
Extended Length | 35 ft |
Certifications | ANSI A14.5 (2007); OSHA |
Base Width | 19 in outside shoes |
The D6232-2 fiberglass extension ladder has non-conductive rails making this ladder ideal for working near electricity. With a duty rating of 300 pounds, the D6232-2 is durable and long lasting. The exclusive ALFLO® rung joint means TWIST-PROOF® performance on the job. The TRACTION-TRED® D rungs are slip resistant and the side rails are interlocking. The dual action feet are for use on hard or penetrable surfaces and swivel easily. The base and fly sections separate easily to use the base section as a single ladder. The durable rail shield bracket and shoe help protect the bottom of the rail. The fly section rails are pre-pierced at the top for easy field installation of accessories.
Features
- Heavy Duty extruded rung locks are spring loaded to operate smoothly
- Molded rung braces on bottom step for increased durability
- Mar-resistant molded end caps
- Exclusive ALFLO® rung joint means TWIST-PROOF® performance
- Combination rail shield bracket and shoe with SHU-LOK® and slip-resistant pad
- Base and fly separate easily to use base section as single ladder
- Interlocking Side Rails with internal rail guides on bottom of fly section securely connect rails
- Pre-pierced holes for easy field installation of accessories
- External guides at top of base section securely interlock rails
- 1-5/8 in slip-resistant TRACTION-TRED® D-rungs
- Smooth operating pulley with polypropylene rope
Specifications
Style | Multi Section |
Performance Rating | 4 star |
Extended Length | 29 ft |
Material | Fiberglass |
Approx. Cu. Ft. Per Unit | 13.7 |
Type | Type IA Duty Rating |
Rung Type | D-Rung |
Size | 32 ft |
Load Capacity | 300 lbs |
Approx. Closed Length | 16 ft |
Foot Material | Slip-resistant pad |
Number of Sections | 2 |
Approx. Shipping Wt. Lbs. | 71.5 |
Base Width | 19 in outside shoes |
Certifications | ANSI A14.5 (2007); OSHA |
Max Working Length | 29 ft |
Reach Height | 31 ft |
The D6228-2 fiberglass extension ladder has non-conductive rails making this ladder ideal for working near electricity. With a duty rating of 300 pounds, the D6228-2 is durable and long lasting. The exclusive ALFLO® rung joint means TWIST-PROOF® performance on the job. The TRACTION-TRED® D rungs are slip resistant and the side rails are interlocking. The dual action feet are for use on hard or penetrable surfaces and swivel easily. The base and fly sections separate easily to use the base section as a single ladder. The durable rail shield bracket and shoe help protect the bottom of the rail. The fly section rails are pre-pierced at the top for easy field installation of accessories.
Features
- Combination rail shield bracket and shoe with SHU-LOK® and slip-resistant pad
- Mar-resistant molded end caps
- Smooth operating pulley with polypropylene rope
- Pre-pierced holes for easy field installation of accessories
- Heavy Duty extruded rung locks are spring loaded to operate smoothly
- External guides at top of base section securely interlock rails
- Interlocking Side Rails with internal rail guides on bottom of fly section securely connect rails
- Base and fly separate easily to use base section as single ladder
- Molded rung braces on bottom step for increased durability
- 1-5/8 in slip-resistant TRACTION-TRED® D-rungs
- Exclusive ALFLO® rung joint means TWIST-PROOF® performance
Specifications
Number of Sections | 2 |
Rung Type | D-Rung |
Max Working Length | 25 ft |
Performance Rating | 4 star |
Reach Height | 27 ft |
Approx. Closed Length | 14 ft |
Certifications | ANSI A14.5 (2007); OSHA |
Material | Fiberglass |
Load Capacity | 300 lbs |
Size | 28 ft |
Style | Multi Section |
Type | Type IA Duty Rating |
Foot Material | Slip-resistant pad |
Base Width | 19 in outside shoes |
Extended Length | 25 ft |
Approx. Cu. Ft. Per Unit | 12 |
Approx. Shipping Wt. Lbs. | 59.5 |
The D6224-2 two section fiberglass extension ladder has non-conductive rails making this ladder ideal for working near electricity. With a duty rating of 300 pounds, the D6224-2 is durable and long lasting. The exclusive ALFLO® rung joint means TWIST-PROOF® performance on the job. The TRACTION-TRED® D rungs are slip resistant and the side rails are interlocking. The dual action feet are for use on hard or penetrable surfaces and swivel easily. The base and fly sections separate easily to use the base section as a single ladder. The durable rail shield bracket and shoe help protect the bottom of the rail. The fly section rails are pre-pierced at the top for easy field installation of accessories.
Features
- 1-5/8 in slip-resistant TRACTION-TRED® D-rungs
- Mar-resistant molded end caps
- Smooth operating pulley with polypropylene rope
- External guides at top of base section securely interlock rails
- Molded rung braces on bottom step for increased durability
- Exclusive ALFLO® rung joint means TWIST-PROOF® performance
- Heavy Duty extruded rung locks are spring loaded to operate smoothly
- Base and fly separate easily to use base section as single ladder
- Pre-pierced holes for easy field installation of accessories
- Combination rail shield bracket and shoe with SHU-LOK® and slip-resistant pad
- Interlocking Side Rails with internal rail guides on bottom of fly section securely connect rails
Specifications
Load Capacity | 300 lbs |
Type | Type IA Duty Rating |
Max Working Length | 21 ft |
Extended Length | 21 ft |
Rung Type | D-Rung |
Certifications | ANSI A14.5 (2007); OSHA |
Reach Height | 23 ft |
Foot Material | Slip-resistant pad |
Performance Rating | 4 star |
Size | 24 ft |
Approx. Closed Length | 12 ft |
Approx. Cu. Ft. Per Unit | 10.3 |
Style | Multi Section |
Approx. Shipping Wt. Lbs. | 52 |
Base Width | 19 in outside shoes |
Material | Fiberglass |
Number of Sections | 2 |
The 6206 Fiberglass 6 ft Step Ladder is ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the Lock-In System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the EDGE® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
Features
- Full set of rear horizontals spaced one per foot
- Double riveted slip-resistant TRACTION-TRED® steps
- Heavy duty internal spreaders
- Back-up plates reinforce all top connectors
- HolsterTop with Lock-In System secures tools to increase productivity
- Slip-resistant foot pads attached to the EDGE® structure
- Optional manual pail shelf kit, model no. PK76-9 or automatic closing pail shelf kit model no. 76-2
- 4 rivets attach top to each front rail
- Shoulder bolt and nut on top hinge
- Every rivet backed up by metal, metal plates or washers to protect rails
- All steps and two rear horizontals are knee-braced
Specifications
Approx. Width | 23-3/8 in |
Approx. Spread | 41-1/4 in |
Material | Fiberglass |
Load Capacity | 300 lbs |
Size | 6 ft |
Max. Standing Height | 3 ft 10 in |
Certifications | ANSI A14.5 (2007); OSHA |
Type | Type IA Duty Rating |
Spreader Material | Steel |
Performance Rating | 4 star |
Description of Top Features | Paint tray slot, can hook, Lock in accessory sockets, 2 tool holes, drill hole, pint, quart and gallon paint can, 2 parts trays, tape measure slot |
With Pail Shelf | No |
Approx. Cu. Ft. Per Unit | 5.3 |
Edge Bracing | Heavy |
Reach Height | 10 ft |
Approx. Shipping Wt. Lbs. | 22 |
The D6216-2 two section fiberglass extension ladder has non-conductive rails making this ladder ideal for working near electricity. With a duty rating of 300 pounds, the D6216-2 is durable and long lasting. The exclusive ALFLO® rung joint means TWIST-PROOF® performance on the job. The TRACTION-TRED® D rungs are slip resistant and the side rails are interlocking. The dual action feet are for use on hard or penetrable surfaces and swivel easily. The base and fly sections separate easily to use the base section as a single ladder. The durable rail shield bracket and shoe help protect the bottom of the rail. The fly section rails are pre-pierced at the top for easy field installation of accessories.
Features
- Interlocking Side Rails with internal rail guides on bottom of fly section securely connect rails
- Pre-pierced holes for easy field installation of accessories
- Combination rail shield bracket and shoe with SHU-LOK® and slip-resistant pad
- External guides at top of base section securely interlock rails
- Molded rung braces on bottom step for increased durability
- Mar-resistant molded end caps
- Base and fly separate easily to use base section as single ladder
- 1-5/8 in slip-resistant TRACTION-TRED® D-rungs
- Heavy Duty extruded rung locks are spring loaded to operate smoothly
- Exclusive ALFLO® rung joint means TWIST-PROOF® performance
Specifications
Number of Sections | 2 |
Extended Length | 13 ft |
Approx. Cu. Ft. Per Unit | 7 |
Max Working Length | 13 ft |
Base Width | 19 in outside shoes |
Performance Rating | 4 star |
Type | Type IA Duty Rating |
Approx. Closed Length | 8 ft |
Style | Multi Section |
Size | 16 ft |
Rung Type | D-Rung |
Reach Height | 15 ft |
Approx. Shipping Wt. Lbs. | 36.5 |
Material | Fiberglass |
Certifications | ANSI A14.5 (2007); OSHA |
Foot Material | Slip-resistant pad |
Load Capacity | 300 lbs |
The 6210 Fiberglass 10 ft Step Stool is ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the Lock-In System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the EDGE® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
Features
- 4 rivets attach top to each front rail
- HolsterTop with Lock-In System secures tools to increase productivity
- All steps and two rear horizontals are knee-braced
- Shoulder bolt and nut on top hinge
- Heavy duty internal spreaders
- Optional manual pail shelf kit, model no. PK76-9 or automatic closing pail shelf kit model no. 76-2
- Slip-resistant foot pads attached to the EDGE® structure
- Every rivet backed up by metal, metal plates or washers to protect rails
- Back-up plates reinforce all top connectors
- Double riveted slip-resistant TRACTION-TRED® steps
- Full set of rear horizontals spaced one per foot
Specifications
Spreader Material | Steel |
Reach Height | 14 ft |
Approx. Cu. Ft. Per Unit | 12.5 |
Approx. Width | 30-3/8 in |
Material | Fiberglass |
Description of Top Features | Paint tray slot, can hook, Lock in accessory sockets, 2 tool holes, drill hole, p int, quart & gallon paint can, 2 parts trays, tape measure slot |
Edge Bracing | Heavy |
Performance Rating | 4 star |
Load Capacity | 300 lbs |
Approx. Shipping Wt. Lbs. | 34 |
Approx. Spread | 65-7/8 in |
With Pail Shelf | No |
Size | 10 ft |
Type | Type IA Duty Rating |
Certifications | ANSI A14.5 (2007); OSHA |
Max. Standing Height | 7 ft 8 in |
The D6220-2 two section fiberglass extension ladder has non-conductive rails making this ladder ideal for working near electricity. With a duty rating of 300 pounds, the D6220-2 is durable and long lasting. The exclusive ALFLO® rung joint means TWIST-PROOF® performance on the job. The TRACTION-TRED® D rungs are slip resistant and the side rails are interlocking. The dual action feet are for use on hard or penetrable surfaces and swivel easily. The base and fly sections separate easily to use the base section as a single ladder. The durable rail shield bracket and shoe help protect the bottom of the rail. The fly section rails are pre-pierced at the top for easy field installation of accessories.
Features
- Pre-pierced holes for easy field installation of accessories
- External guides at top of base section securely interlock rails
- Smooth operating pulley with polypropylene rope
- 1-5/8 in slip-resistant TRACTION-TRED® D-rungs
- Base and fly separate easily to use base section as single ladder
- Exclusive ALFLO® rung joint means TWIST-PROOF® performance
- Interlocking Side Rails with internal rail guides on bottom of fly section securely connect rails
- Mar-resistant molded end caps
- Heavy Duty extruded rung locks are spring loaded to operate smoothly
- Combination rail shield bracket and shoe with SHU-LOK® and slip-resistant pad
- Molded rung braces on bottom step for increased durability
Specifications
Size | 20 ft |
Foot Material | Slip-resistant pad |
Performance Rating | 4 star |
Style | Multi Section |
Extended Length | 17 ft |
Max Working Length | 17 ft |
Base Width | 19 in outside shoes |
Approx. Cu. Ft. Per Unit | 8.7 |
Reach Height | 19 ft |
Approx. Shipping Wt. Lbs. | 44.5 |
Rung Type | D-Rung |
Type | Type IA Duty Rating |
Number of Sections | 2 |
Load Capacity | 300 lbs |
Certifications | ANSI A14.5 (2007); OSHA |
Approx. Closed Length | 10 ft |
Material | Fiberglass |