S2K Commerce - Products Dropdown
ActionsS2K Commerce - Order Entry
ActionsStep Ladders
The T6208 Fiberglass 8 ft Twin Step Ladder offers a high performance dual HolsterTop with a paint and tool holder for convenience. The internal spreaders are heavy duty and the slip-resistant TRACTION-TRED® steps are all double riveted and knee braced. These twin stepladders allow 300 pounds per side making them ideal for one or two person jobs. The EDGE® molded brace and foot pad combination provide bracing strength and increased protection against damage. Fiberglass rails are non-conductive for working near electricity.
Features
- *Energy Diffusing Geometry
- Double riveted slip-resistant TRACTION-TRED® steps
- Slip-resistant foot pads attached to the EDGE® structure
- 4 rivets attach top to each rail
- High performance dual HolsterTop paint and tool holder
- Heavy duty internal spreaders
- Maximum load per side, including person and materials, shall not exceed duty rating of ladder
- All steps are knee-braced
- EDGE® molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage
- Design for one or two-person jobs
- Every rivet backed up by metal, metal plates or washers to protect rails
Specifications
Approx. Spread | 64-1/8 in |
Size | 8 ft |
Load Capacity | 300 lbs |
Description of Top Features | 2 Paint tray slots, 6 tool holes, 2 drill holes, 2 @ quart paint can, gallon paint can, 2 parts trays |
Type | Type IA Duty Rating |
Certifications | ANSI A14.5 (2007); OSHA |
Approx. Width | 26-7/8 in |
Edge Bracing | Heavy |
Max. Standing Height | 5 ft 9 in |
Approx. Shipping Wt. Lbs. | 37 |
Reach Height | 12 ft |
Approx. Cu. Ft. Per Unit | 12.3 |
Spreader Material | Steel |
With Pail Shelf | No |
Material | Fiberglass |
Performance Rating | 4 star |
The NEW PD6210 Podium Ladder offers the same reach height as a 12 ft stepladder and is ideal for working at fixed heights and is easier to maneuver than scaffolds or lifts. The extra-large platform with toe guard feels like you are standing on the ground and 4X Work Zone allows you to work facing any direction. This ladder features full aluminum bracing and a full set of rear horizontals. The LOCKTOP™ extended guardrail provides an extra point of contact and conveniently organizes tools and accessories. The newly designed EDGE360™ gives the bottom of the ladder protection from every angle with integrated rail shield, EDGE bracing and over-sized foot pads.
Features
- Extra-large platform for long standing comfort
- 300 lbs Load Capacity, Type IA Duty Rating
- All steps and two rear horizontals are knee-braced
- 4X Work Zone to reach all directions
- EDGE 360® includes an integrated rail shield, EDGE bracing and oversized foot pads
- Double riveted slip-resistant TRACTION-TRED® steps
- Back-up plates reinforce all top connectors
- Same reach height as a 12 ft stepladder
- Full set of rear horizontals spaced one per foot
- LOCKTOP™ extended guard rail securely wraps around work zone and holds an arsenal of tools
Specifications
Approx. Cu. Ft. Per Unit | 29.1 |
Type | Type IA Duty Rating |
Approx. Overall Ladder Height (Open) | 150 in |
Max. Standing Height | 10 ft |
Load Capacity | 300 lbs |
Size | 12 ft |
Platform Width | 16 in |
Height to Platform | 10 ft |
Approx. Width | 38-3/8 in |
Approx. Shipping Wt. Lbs. | 58 |
Performance Rating | 4 star |
Material | Fiberglass |
Reach Height | 16 ft |
Approx. Spread | 80-2/3 in |
Platform Depth | 19-1/2 in |
The NEW PD6208 Podium Ladder offers the same reach height as a 10 ft stepladder and is ideal for working at fixed heights and is easier to maneuver than scaffolds or lifts. The extra-large platform with toe guard feels like you are standing on the ground and 4X Work Zone allows you to work facing any direction. This ladder features full aluminum bracing and a full set of rear horizontals. The LOCKTOP™ extended guardrail provides an extra point of contact and conveniently organizes tools and accessories. The newly designed EDGE360™ gives the bottom of the ladder protection from every angle with integrated rail shield, EDGE bracing and over-sized foot pads.
Features
- 4X Work Zone to reach all directions
- Full set of rear horizontals spaced one per foot
- LOCKTOP™ extended guard rail securely wraps around work zone and holds an arsenal of tools
- Same reach height as a 10 ft stepladder
- EDGE 360® includes an integrated rail shield, EDGE bracing and oversized foot pads
- Double riveted slip-resistant TRACTION-TRED® steps
- All steps and two rear horizontals are knee-braced
- Extra-large platform for long standing comfort
- Back-up plates reinforce all top connectors
- 300 lbs Load Capacity, Type IA Duty Rating
Specifications
Reach Height | 14 ft |
Approx. Overall Ladder Height (Open) | 127 in |
Max. Standing Height | 8 ft |
Type | Type IA Duty Rating |
Approx. Spread | 68-1/5 in |
Platform Depth | 19-1/2 in |
Performance Rating | 4 star |
Size | 10 ft |
Approx. Shipping Wt. Lbs. | 47 |
Load Capacity | 300 lbs |
Material | Fiberglass |
Approx. Cu. Ft. Per Unit | 22.3 |
Platform Width | 16 in |
Height to Platform | 8 ft |
Approx. Width | 34-3/4 in |
The NEW PD6204 Podium Ladder offers the same reach height as a 6 ft stepladder and is ideal for working at fixed heights and is easier to maneuver than scaffolds or lifts. The extra-large platform with toe guard feels like you are standing on the ground and 4X Work Zone allows you to work facing any direction. This ladder features full aluminum bracing and a full set of rear horizontals. The LOCKTOP™ extended guardrail provides an extra point of contact and conveniently organizes tools and accessories. The newly designed EDGE360™ gives the bottom of the ladder protection from every angle with integrated rail shield, EDGE bracing and over-sized foot pads.
Features
- Full set of rear horizontals spaced one per foot
- Same reach height as a 6 ft stepladder
- Back-up plates reinforce all top connectors
- Extra-large platform for long standing comfort
- 300 lbs Load Capacity, Type IA Duty Rating
- EDGE 360® includes an integrated rail shield, EDGE bracing and oversized foot pads
- LOCKTOP™ extended guard rail securely wraps around work zone and holds an arsenal of tools
- 4X Work Zone to reach all directions
- All steps and two rear horizontals are knee-braced
- Double riveted slip-resistant TRACTION-TRED® steps
Specifications
Performance Rating | 4 star |
Max. Standing Height | 4 ft |
Platform Depth | 19-1/2 in |
Approx. Cu. Ft. Per Unit | 11.3 |
Height to Platform | 4 ft |
Material | Fiberglass |
Type | Type IA Duty Rating |
Reach Height | 10 ft |
Approx. Shipping Wt. Lbs. | 26.7 |
Approx. Width | 27-1/2 in |
Approx. Spread | 43-2/3 in |
Load Capacity | 300 lbs |
Approx. Overall Ladder Height (Open) | 81 in |
Size | 6 ft |
Platform Width | 16 in |
The NEW PD6206 Podium Ladder offers the same reach height as an 8 ft stepladder and is ideal for working at fixed heights and is easier to maneuver than scaffolds or lifts. The extra-large platform with toe guard feels like you are standing on the ground and 4X Work Zone allows you to work facing any direction. This ladder features full aluminum bracing and a full set of rear horizontals. The LOCKTOP™ extended guardrail provides an extra point of contact and conveniently organizes tools and accessories. The newly designed EDGE360™ gives the bottom of the ladder protection from every angle with integrated rail shield, EDGE bracing and over-sized foot pads.
Features
- Extra-large platform for long standing comfort
- Back-up plates reinforce all top connectors
- Same reach height as a 8 ft stepladder
- LOCKTOP™ extended guard rail securely wraps around work zone and holds an arsenal of tools
- Double riveted slip-resistant TRACTION-TRED® steps
- 300 lbs Load Capacity, Type IA Duty Rating
- EDGE 360® includes an integrated rail shield, EDGE bracing and oversized foot pads
- Full set of rear horizontals spaced one per foot
- 4X Work Zone to reach all directions
- All steps and two rear horizontals are knee-braced
Specifications
Approx. Overall Ladder Height (Open) | 104 in |
Approx. Width | 31-1/4 in |
Platform Depth | 19-1/2 in |
Load Capacity | 300 lbs |
Approx. Shipping Wt. Lbs. | 34.5 |
Platform Width | 16 in |
Size | 8 ft |
Max. Standing Height | 6 ft |
Material | Fiberglass |
Approx. Spread | 55-4/5 in |
Performance Rating | 4 star |
Type | Type IA Duty Rating |
Height to Platform | 6 ft |
Approx. Cu. Ft. Per Unit | 16.4 |
Reach Height | 12 ft |
The 6208 Fiberglass 8 ft Step Ladder is ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the Lock-In System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the EDGE® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
Features
- Slip-resistant foot pads attached to the EDGE® structure
- 4 rivets attach top to each front rail
- Optional manual pail shelf kit, model no. PK76-9 or automatic closing pail shelf kit model no. 76-2
- HolsterTop with Lock-In System secures tools to increase productivity
- All steps and two rear horizontals are knee-braced
- Every rivet backed up by metal, metal plates or washers to protect rails
- Back-up plates reinforce all top connectors
- Double riveted slip-resistant TRACTION-TRED® steps
- Shoulder bolt and nut on top hinge
- Heavy duty internal spreaders
- Full set of rear horizontals spaced one per foot
Specifications
With Pail Shelf | No |
Approx. Spread | 53-5/8 in |
Edge Bracing | Heavy |
Description of Top Features | Paint tray slot, can hook, Lock in accessory sockets, 2 tool holes, drill hole, p int, quart & gallon paint can, 2 parts trays, tape measure slot |
Load Capacity | 300 lbs |
Approx. Width | 26-7/8 in |
Approx. Shipping Wt. Lbs. | 30 |
Performance Rating | 4 star |
Reach Height | 12 ft |
Approx. Cu. Ft. Per Unit | 8.1 |
Material | Fiberglass |
Certifications | ANSI A14.5 (2007); OSHA |
Max. Standing Height | 5 ft 9 in |
Size | 8 ft |
Type | Type IA Duty Rating |
Spreader Material | Steel |
The 6212 Fiberglass 12 ft Step Stool is ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the Lock-In System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the EDGE® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
Features
- Shoulder bolt and nut on top hinge
- Full set of rear horizontals spaced one per foot
- Every rivet backed up by metal, metal plates or washers to protect rails
- All steps and two rear horizontals are knee-braced
- 4 rivets attach top to each front rail
- Heavy duty internal spreaders
- HolsterTop with Lock-In System secures tools to increase productivity
- Optional manual pail shelf kit, model no. PK76-9 or automatic closing pail shelf kit model no. 76-2
- Double riveted slip-resistant TRACTION-TRED® steps
- Slip-resistant foot pads attached to the EDGE® structure
- Back-up plates reinforce all top connectors
Specifications
Performance Rating | 4 star |
With Pail Shelf | No |
Certifications | ANSI A14.5 (2007); OSHA |
Type | Type IA Duty Rating |
Approx. Cu. Ft. Per Unit | 15 |
Approx. Shipping Wt. Lbs. | 49 |
Size | 12 ft |
Load Capacity | 300 lbs |
Material | Fiberglass |
Spreader Material | Steel |
Max. Standing Height | 9 ft 7 in |
Reach Height | 16 ft |
Edge Bracing | Heavy |
Approx. Width | 33-7/8 in |
Approx. Spread | 78-1/4 in |
Description of Top Features | Paint tray slot, can hook, Lock in accessory sockets, 2 tool holes, drill hole, p int, quart & gallon paint can, 2 parts trays, tape measure slot |
The 6205 Fiberglass 5 ft Step Ladder is ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the Lock-In System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the EDGE® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
Features
- Optional manual pail shelf kit, model no. PK76-9 or automatic closing pail shelf kit model no. 76-2
- Heavy duty internal spreaders
- 4 rivets attach top to each front rail
- Shoulder bolt and nut on top hinge
- Slip-resistant foot pads attached to the EDGE® structure
- Back-up plates reinforce all top connectors
- Full set of rear horizontals spaced one per foot
- HolsterTop with Lock-In System secures tools to increase productivity
- Every rivet backed up by metal, metal plates or washers to protect rails
- All steps and top rear horizontal are knee-braced
- Double riveted slip-resistant TRACTION-TRED® steps
Specifications
Max. Standing Height | 2 ft 10 in |
Material | Fiberglass |
Approx. Cu. Ft. Per Unit | 4.1 |
Edge Bracing | Heavy |
With Pail Shelf | No |
Certifications | ANSI A14.5 (2007); OSHA |
Performance Rating | 4 star |
Reach Height | 9 ft |
Spreader Material | Steel |
Size | 5 ft |
Approx. Spread | 35-1/8 in |
Approx. Width | 21-5/8 in |
Description of Top Features | Paint tray slot, can hook, Lock in accessory sockets, 2 tool holes, drill hole, p int, quart & gallon paint can, 2 parts trays, tape measure slot |
Type | Type IA Duty Rating |
Approx. Shipping Wt. Lbs. | 19 |
Load Capacity | 300 lbs |
The 6206 Fiberglass 6 ft Step Ladder is ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the Lock-In System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the EDGE® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
Features
- Full set of rear horizontals spaced one per foot
- Double riveted slip-resistant TRACTION-TRED® steps
- Heavy duty internal spreaders
- Back-up plates reinforce all top connectors
- HolsterTop with Lock-In System secures tools to increase productivity
- Slip-resistant foot pads attached to the EDGE® structure
- Optional manual pail shelf kit, model no. PK76-9 or automatic closing pail shelf kit model no. 76-2
- 4 rivets attach top to each front rail
- Shoulder bolt and nut on top hinge
- Every rivet backed up by metal, metal plates or washers to protect rails
- All steps and two rear horizontals are knee-braced
Specifications
Approx. Width | 23-3/8 in |
Approx. Spread | 41-1/4 in |
Material | Fiberglass |
Load Capacity | 300 lbs |
Size | 6 ft |
Max. Standing Height | 3 ft 10 in |
Certifications | ANSI A14.5 (2007); OSHA |
Type | Type IA Duty Rating |
Spreader Material | Steel |
Performance Rating | 4 star |
Description of Top Features | Paint tray slot, can hook, Lock in accessory sockets, 2 tool holes, drill hole, pint, quart and gallon paint can, 2 parts trays, tape measure slot |
With Pail Shelf | No |
Approx. Cu. Ft. Per Unit | 5.3 |
Edge Bracing | Heavy |
Reach Height | 10 ft |
Approx. Shipping Wt. Lbs. | 22 |
The 6210 Fiberglass 10 ft Step Stool is ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the Lock-In System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the EDGE® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
Features
- 4 rivets attach top to each front rail
- HolsterTop with Lock-In System secures tools to increase productivity
- All steps and two rear horizontals are knee-braced
- Shoulder bolt and nut on top hinge
- Heavy duty internal spreaders
- Optional manual pail shelf kit, model no. PK76-9 or automatic closing pail shelf kit model no. 76-2
- Slip-resistant foot pads attached to the EDGE® structure
- Every rivet backed up by metal, metal plates or washers to protect rails
- Back-up plates reinforce all top connectors
- Double riveted slip-resistant TRACTION-TRED® steps
- Full set of rear horizontals spaced one per foot
Specifications
Spreader Material | Steel |
Reach Height | 14 ft |
Approx. Cu. Ft. Per Unit | 12.5 |
Approx. Width | 30-3/8 in |
Material | Fiberglass |
Description of Top Features | Paint tray slot, can hook, Lock in accessory sockets, 2 tool holes, drill hole, p int, quart & gallon paint can, 2 parts trays, tape measure slot |
Edge Bracing | Heavy |
Performance Rating | 4 star |
Load Capacity | 300 lbs |
Approx. Shipping Wt. Lbs. | 34 |
Approx. Spread | 65-7/8 in |
With Pail Shelf | No |
Size | 10 ft |
Type | Type IA Duty Rating |
Certifications | ANSI A14.5 (2007); OSHA |
Max. Standing Height | 7 ft 8 in |