Cordless Bare Tools

The MILWAUKEE® M12 FUEL™ ProPEX® Expander unlocks a breakthrough in productivity for plumbing installers, delivering the fastest 3/8"-1" expansions. Featuring an auto-rotating head, the expander provides uniform expansions for the most consistent installations. In combination with the ProPEX® Expander Heads with RAPID SEAL™, installers will experience up to 65% faster sealing of connections as temperatures decrease, reducing the time before pressure testing. An extended dual actuating trigger and a compact right-angle design provide easy access in tight locations. All-metal gears and an integrated metal frame deliver maximum durability on the job site. The POWERSTATE™ Brushless Motor offers the fastest expansions yet runs cooler with no wearable components. The REDLITHIUM™ 2.0 Compact Battery Pack provides up to 20% more power, 2X more recharges than standard lithium-ion batteries, and best-in-class performance in extreme jobsite conditions. REDLINK PLUS™ intelligence ensures optimized performance and protection from overload, overheating, and over-discharge. The onboard fuel gauge helps monitor the charge more accurately, so there's less downtime on the job.

The M18™ 2 Gallon wet/dry vacuum provides users with a powerful and portable wet/dry clean-up tool. A high performance motor creates powerful suction for both wet and dry applications. Its stackable design and organized on-board storage keeps all of the attachments inside the unit for convenient transport and storage. The 0880-20 comes with a flexible hose, crevice tool, utility nozzle, and a certified HEPA filter. With 30+ minutes of run time on a M18™ REDLITHIUM™ HIGH DEMAND™ 9.0 battery pack, its ideal for extended spot and area clean up.

The MILWAUKEE® M18™ Brushless Threaded Rod Cutter is a dedicated cutting solution for the most common threaded rod sizes. This includes coarse 1/4", 3/8" and 1/2" mild steel and 1/4" and 3/8" stainless steel threaded rod. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18™ REDLITHIUM™ 2.0Ah Battery. The four-sided cutting dies cut all sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts allowing nuts to be threaded on by hand. The rod cutter has optimized blade geometry and cut speed to prevent chips and sparks. The tool has auto jaw opening for fast, repetitive cuts while a reverse button helps prevent unintended cuts. The tool's centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides a stable surface for benchtop cuts.

The MILWAUKEE® M12 FUEL™ Installation Drill/Driver features 4 dedicated solutions, delivering unrivaled access and control with up to 300 in-lbs of max torque. Four heads, including a 3/8" Chuck, Offset Driver, ¼" Hex, and Right Angle, can attach in 16 different positions. This provides a 4-in-1 drilling and driving solution that is purposefully designed to reach uniquely challenging locations. The compact drill driver has a slim tool profile and an inline grip in the back of the tool that provides ultimate tool control and unrivaled access. The top of the tool is flat, allowing the tool to be placed flush against surfaces for additional access. The front of the tool is equipped with a magnetic bit holder that securely holds multiple bits, enhancing productivity. These features combine with the tool's compact size and weight allowing the multi-head drill/driver to be maneuvered for maximum versatility and best access in hard to reach places. The modular drill/driver is equipped with a POWERSTATE™ Brushless Motor, delivering 1600 RPMS and 300 in./lbs of torque. This provides the necessary power for installation applications, especially in electrical, cabinet installation, MRO, HVAC, automotive, and remodel applications. The installation drill/driver features REDLINK Plus™ Intelligence, protecting the tool from overloading or overheating. The drill/driver comes equipped with a magnetic bit holder on the front handle that securely holds multiple bits as well as a removable belt clip. The compact cordless drill/driver is powered by the Milwaukee M12™ REDLITHIUM™ battery packs (not included), delivering more run-time per charge and more work over the life of the pack. In addition to the 12-volt tool and four attachments, a compartmentalized contractor bag is included to hold each head.

When you need the perfect balance of high performance and size to get tough jobs done, use this new 20V MAX XR Cordless 1/2 in. Mid-Range Impact Wrench with Detent Pin Anvil. This power tool delivers 600 ft-lbs of max fastening torque and 800 ft-lbs. of max breakaway torque for challenging projects. Designed to help prevent overtightening in forward, and run-off in reverse, the wrench integrates a Precision Wrench setting to help optimize user control. Utilize the updated 4-mode push button switch to easily transition speeds when needed. This Impact Wrench brings high torque and weighs less than 4 lbs. (Tool only), making it ideal for pipe flanges, grooved couplings, tilt wall braces, wheel lugs, concrete anchor setting and many other applications where high torque is needed in compact spaces. Battery & Charger Sold Separately

The MILWAUKEE® M18 FUEL™ ¼" Hex Impact Driver is the Most POWERFUL and FASTEST DRIVING impact driver, featuring ULTIMATE TRIGGER CONTROL. MILWAUKEE® POWERSTATE™ Brushless motor delivers unmatched power for a full range of capabilities to complete the widest variety of applications. Increase productivity on the jobsite with the fastest driving speed of any impact driver without sacrificing power or control. MILWAUKEE® REDLINK PLUS™ intelligence delivers ULTIMATE TRIGGER CONTROL by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials. MILWAUKEE® M18™ REDLITHIUM™ Battery Packs deliver more work per charge and more work over the life of the pack. Featuring 4-mode drive control provides users with greater control over output speed and power. Self-Tapping Screw Mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking, and stripping out screws. This new impact driver also features Tri-LED lighting, illuminating the area of work while eliminating shadows. The M18 FUEL ¼" Hex Impact Driver is part of MILWAUKEE® M18 system which is fully compatible with over 200+ solutions.

Perform fast single pass cuts and scores in concrete, pavestones, steel, and rebar with this 60V MAX Brushless Cordless 9 in. Cut-Off Saw. The cut-off saw delivers up to 6,600 no-load RPM with its high-performance brushless motor while the 9 in. wheel allows for cuts up to 3-1/4 in. deep. Get power and runtime feedback during demanding applications with the integrated heavy-load indicator light and rotate the saw as you work using the 5-position guard to choose the best cutting angle for visibility and mobility in confined spaces. For protection in harsh jobsite conditions, the onboard battery box can be latched, sealed, and is large enough to accommodate the DCB615 battery (battery sold separately). This versatile saw features built-in WIRELESS TOOL CONTROL functionality which is designed to enhance runtime and worksite productivity by allowing it to be linked to other compatible tools and operated cord-free. This power tool is OSHA Table 1 Compliant for dust management with the dual-sided water feed system and it is TAG READY so users and companies can simply attach a DEWALT Tag and track its location via the DEWALT TOOL CONNECT app. Tag is sold separately. Battery & Charger Sold Separately

The MILWAUKEE® M12 Cable Stapler delivers unmatched stapling performance in the most compact battery-powered solution leading to a faster, more efficient rough-in process. The compact, lightweight design provides users with access to tight stud bays and improved ergonomics when stapling overhead or during difficult-to-reach situations. Moveable cable guides ensure proper alignment and the coil-spring mechanism consistently sinks the staples to the appropriate depth when fastening NM-B Sheathed Cable (14, 12, 10 AWG) and low voltage cables, supporting peak stapling productivity. Only compatible with the Milwaukee 1" insulated staples (sold separately), the M12 Cable Stapler gives the user the run-time needed to sink up to 1,200 staples on a fully charged M12 CP2.0ah battery.

The MILWAUKEE® M18 FUEL™ ½" Hammer Drill Driver is the Industry's Most Powerful Hammer Drill, delivering the capability to drill the largest holes at high speed into the densest materials. The cordless drill is the Most Compact solution in its class and features AutoStop™ Control Mode for Enhanced Safety. The POWERSTATE™ Brushless motor delivers the most power under load to complete 2-9/16" Self-Feed holes in dense woods for increased productivity. At only 6.9" in length, this is the most compact cordless drill in its class for the best access and maneuverability in tight spaces. The AutoStop™ Control Mode offers enhanced safety for the operator by preventing over-rotation in a bind-up with the best reaction time in the industry. The REDLINK PLUS™ intelligence ensures maximum performance and protects from overloads, heating, and over-discharge. The MILWAUKEE® M18™ REDLITHIUM™ battery packs deliver more work per charge and more work over the life of the pack when compared to competitors. The all metal ratcheting chuck is the best-in-class. This provides increased grip strength, durability, and corrosion resistance.

The DEWALT 20V Cordless Dry Hand Vacuum (Tool only) is a jobsite cleaning solution that provides users with powerful performance (46 CFM) to pick up common jobsite debris ranging from drywall, dust, to small screws and nails. This versatile vacuum comes with 6 different cleaning attachment accessories to tackle any cleaning job from floor level to overhead. The hand vacuum can be used to handle smaller messes or used in combination with the extension tube and floor accessory to clean up floor areas. A bright LED light illuminates the darkest areas. A HEPA Filter allows for clean efficient cleanup of fine dust and drywall and follows OSHA Table 1 Compliance under housekeeping rules. It comes fully equipped with an extension tube, floor nozzle, flexible hose, crevice nozzle, gulper brush, round brush, belt hook, accessory holder, and HEPA filter. Up to 21.4 minutes of runtime per charge using DCB205 battery (sold separately). Can fill up to 15 tank fills per charge using DCB205 battery (sold separately).