Fences and Guides
Save money and cut or remove stock with enhanced efficiency when you wield the Metal A AO Type 27 grinding and cutting wheel. Engineered for cutting at 30- or 90-degree angles, this wheel is great for notching, offhand cut-offs and light side grinding. With a low initial price, high-quality aluminum oxide abrasive, durable bond and thickness of 1/8 inch, this extra-hard wheel strikes the perfect balance between economy and efficiency and is great for inexperienced operators or small jobs where minimizing cost is crucial.
Features
- Quality aluminum oxide abrasive at a low initial price
- 1/8 in. thick wheel designed to be used at a 90 degree angle for offhand cut-off, notching or 30 degree angle for light side grinding
- Durable bond and wheel hardness are designed to provide the best mix of cut rate and life
- Good choice when low initial price is needed for small jobs or inexperienced operators working on 400 series stainless, hard carbon steels, soft carbon steels
Applications
- Cut-Off
- Stock Removal
Specifications
| Diameter | 7 in. |
| Abrasive | Aluminum Oxide |
| Wheel type | Type 27 |
| Specifications | NORTON METAL |
| Max Operating Speed RPM | 8600 |
| Arbor hole | 5/8 In. - 11 |
| Thickness | 1/8 In. |
Take it easy on operators and your budget when you use the Metal RightCut A AO Type 01/41 right-angle cut-off wheel. Its excellent balance and free-cutting action lets operators cut with ease, while its low cost makes it a great choice for small jobs and inexperienced workers. Crafted with a high-quality aluminum oxide abrasive, this wheel delivers efficient, burr-free cutting of a variety of materials, including 400-series stainless and hard- and soft-carbon steels. Straight and ultra-thin, this wheel lets operators cut or grind effectively at right angles with minimal material loss.
Features
- Quality aluminum oxide abrasive wheel at a low initial price
- Ultra-thin reinforced straight, right angle grinder wheel designed only for cut-off applications where a fast cut and minimum material loss are desired; good balance and free-cutting action are easy on the operator
- Burr-free cutting of on 400 series stainless, hard carbon steels, soft carbon steels
- Good choice when low initial price is needed for small jobs or inexperienced operators
- Designed for quick cutting on right angle grinders with proper flanges
Applications
- Cut-Off
Specifications
| Thickness | .040 In. |
| Diameter | 6 In. |
| Grit Size | 60 Grit |
| Abrasive/Mineral | Aluminum Oxide |
| Size Derived | 6 In. x 1 mm x 7/8 In. |
| Wheel Type | Type 01/41 |
| Max Operating Speed | 10185 |
| Color / Finish | Black |
Features
- Fast cutting: precision-formed teeth create fast, clean cuts
- Exceptional durability: Matrix II high-speed steel teeth excel in metal-cutting applications
- Long life: alloy backing steel provides extended blade life
- Versatility: designed for cutting common materials up to 5/32 in. thick and very hard materials 5/32 in. to 3/16 in. thick
Specifications
| Application Material | Pipe;Angle Iron;Conduit;Copper Tube;Strut;Threaded Rod |
| Blade Length | 44.875 in |
| Blade Material | BiMetal |
| Color Finish | Silver |
| Depth | 14.29 Inches |
| For Use With Saw Type | Portable Band Saws |
| Material | High Speed Steel |
| Material Application | Thin Metal |
| Number of Teeth | 1077 |
| Package Quantity | 100 |
| Teeth Per Inch (TPI) | 24 |
Lenox MetalMax Diamond Edge Cutoff Wheel, 7" x 7/8", is an alternative to bonded abrasive cut-off wheels. Breakthrough diamond technology delivers 1,000 or more cuts and 30X longer life than thin bonded cutoff wheels without sacrificing speed or finish. Made of solid steel to greatly reduce the risk of breakage, the combination of a steel body with a diamond edge allows MetalMax to hold its original wheel diameter until the last cut, meaning better control, reach, and cut precision throughout the wheel life. The enhanced design substantially reduces dust particles and lessens odor. Lenox MetalMax is suitable for metal cutting applications including steel, sheet metal, stainless steel, rebar, cast iron, aluminum and non-ferrous metals, and works at the same speeds and feeds as thin bonded abrasive wheels.Average performance in 1 carbon steel square tube vs. thin bonded abrasive cutoff wheels.Cutting wax or saw lubricant is recommended to avoid chip welding when cutting aluminum.
Features
- 1,000+ Cuts
- Metalmax Delivers 1,000 Or More Cuts With No Need For Wheel Changes. That Is 30 Times Longer Life Than Thin Bonded Cut-Off Wheels.
- Long Life
- Advanced Diamond Technology Provides Extreme Durability In Metal Cutting Applications, Leading To Increased Productivity, Reduced Downtime, And A Lower Cost Per Cut Compared To Thin Bonded Cut-Off Wheels.
- Diameter Retention
- Because Lenox Metalmax Is Made With Diamonds, It Doesn't Get Smaller. The Cutting Depth Stays The Same Throughout Its Life, Meaning Better Control, Reach And Precision.
- Less Dust Residue
- With Lenox Metalmax There Is Less Odor And Dust Residue As The Wheel Does Not Wear Down Like Bonded Abrasives. Sparks Originate Only From The Material Being Cut.
- One Wheel, Multiple Materials
- Lenox Metalmax Is Designed For Use In The Same Power Tools As Bonded Abrasive Wheels, At The Same Rpms And Feed Forces. No Changes In Operating Settings Are Required. Use Lenox Metalmax As You Would A Bonded Abrasive Wheel.
Specifications
| Height | 7.300 in |
| Length | 7.100 in |
| Width | 0.300 in |
| Weight | 0.760 lbs |
| Product Type | DIAMOND BLADE |
| Product Material Group | METAL |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Warranty | NLW |
The MILWAUKEE® WRECKER™ with NITRUS CARBIDE™ SAWZALL® blade for multi-material cutting is the next generation of carbide teeth technology. The NITRUS CARBIDE™ technology allows this blade to be the fastest cutting and longest-life multi-material blade on the market. The carbide SAWZALL® blade features a 6TPI design for best material versatility and the ability to cut materials from wood with nails and screws to thick metals. This metal cutting SAWZALL® blade delivers 2x life versus carbide teeth blades eliminating the need for blade changes when cutting a variety of materials. This carbide sawzall blade is available in 6", 9", and 12" blade lengths. It is the ideal blade for demolition and remodeling jobs.
Features
- Unmatched Life. Superior Cutting Versatility.
- NITRUS delivers the fastest cutting, longest life products with a breakthrough Carbide Technology
- Our NITRUS Carbide blades are engineered to dissipate heat better than any other demolition blade for faster cutting
- 2x life over Carbide Teeth Blades
- Best blade for residential demolition applications
- Optimized Performance in: wood with nails and screws, roofing material, plaster and drywall, rigid conduit and black pipe
- Fang Tip™ design for fastest plunge cuts in woods, plaster and drywall
- 6TPI design for best material versatility
- 1/2" Universal Tang
- Made in the USA
- Available in 6", 9", and 12" lengths in 1PKs, 3PKs, and 5PKs
Specifications
| Blade Length | 9 in |
| Depth | 2 Inches |
| Material | Carbide |
| Material Application | All-Purpose;Multi-Purpose |
| Number of Teeth | 45 |
| Package Quantity | 1 |
| Teeth Per Inch (TPI) | 6 |
| Color Finish | Black;Red |
Features
- LED lighted power & laser switches
- Powerful double-insulated motor for continuous loads
- Soft start
- Electric brake
- Worm gear drive
- Internally powered laser (no batteries required)
- Spring loaded lower guard
Specifications
| Current/Voltage | 120 V |
| Power consumption | 1,800 W |
| No load speed | 2,300 rpm |
| Saw blade Ø (in) | 9 |
| Saw blade Ø (mm) | 230 |
| Arbor (in) | 1 |
| Arbor (mm) | 25.4 |
| Max. depth of cut (in) | 3-1/4 |
| Max. depth of cut (mm) | 80 |
| Weight (lbs) | 20.94 |
| Weight (kg) | 9.5 |
Specifications
| Dia. (in) | 9 |
| Dia. (mm) | 230 |
| Teeth | 48 |
Diablo's Steel Demon Cermet II saw blades are redefining metal cutting, and the jobsite, by introducing exclusive innovation to allow users to cut both mild and stainless steels for up to 5X longer life versus standard carbide-tipped metal cutting saw blades. The specially formulated Cermet II teeth provide high heat tolerances and increased hardness for superior wear and life. Featuring a special Triple Chip Grind and Perma-SHIELD® coating, these blades slice through the toughest of metals to produce precise, burr-free cuts with less sparks. The ability to cut through both mild and stainless steel eliminates the need for individually dedicated saw blades, offering a one-blade solution for ultimate metal cutting performance and an unmatched value story.
Cuts
- Steel Studs
- Angle Iron
- Flat Bar
- Channel
- EMT Conduit
Features
- Cermet II (Ceramic and Metallic) teeth provide a high heat tolerance and increased hardness for superior wear and up to 5X longer than standard carbide metal cutting saw blades
- Triple Chip Tooth design provides less sparks and burr-free finishes that require no-rework
- Advanced Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping the blade cool for straight, accurate cuts
- Tri-Metal Shock Resistant Brazing, a three-metal brazing system, allows Cermet II teeth to withstand extreme impact for maximum durability
- Laser Cut Thin Kerf Design provides less resistance and heat build-up for ease of cut, accuracy and long cutting life in cordless or corded saws
- Perma-SHIELD® coating resists heat build-up by protecting the blade against gumming and corrosion
- Laser Cut Arbor reduces vibration and premature wear for accurate blade rotation when in use
Applications
- Metal Cutting
Specifications
| Arbor | 5/8" |
| Diameter | 7-1/4" |
| Hook Angle | 2° |
| Kerf | .075" |
| Plate | .063" |
| Max RPM | 5800 |
| Teeth | 48 TCG |
Diablo's next generation Aluminum saw blades are optimized for cutting thin (up to 1/8"), medium (3/32"-1/4") and thick (3/16"-7/16") aluminum metals. Featuring the new, specially formulated Diablo TiCo™ Super-Density Micro-Grain Carbide, these radical blades withstand impact, reduce wear, provide clog free cuts and last longer than standard carbide in metal cutting applications. The specially formulated metal cutting carbide teeth feature a Triple Chip Grind (TCG) Tooth Design for clean, burr-free finishes, virtually eliminating any type of rework. Tri-Metal Shock Resistant Brazing allows these Aluminum blades to slice through metal materials while withstanding extreme impact for maximum durability. Diablo's Aluminum saw blade series is ideal for corded and cordless saws when on-the-job cutting non-ferrous metals such as aluminum extrusions, copper pipe, brass plate, etc.
Cuts
- Medium Aluminum
- Plastics
- Copper
- Brass
- Fiberglass
Features
- Tico™ Super-Density Micro-Grain Carbide for extreme cutting life and clog free cuts
- Tri-Metal Shock Resistant Brazing for extreme impact and maximum durability
- Triple Chip Grind (TCG) Tooth Geometry for maximum life, speed, and durability, giving clean, burr-free cuts
- Laser-Cut Stabilizer Vents for trapping noise and reducing vibration for accuracy and durability
- Perma-SHIELD® Non-Stick Coating for protection against heat, gumming and corrosion
Applications
- Medium Aluminum Cutting
Specifications
| Arbor | 5/8" |
| Diameter | 6-1/2" |
| Hook Angle | 0° |
| Kerf | .083" |
| Max RPM | 10000 |
| Teeth | 54 |