Tools
The MILWAUKEE® M18 FUEL™ ANGLER™ Interchangeable Pulling Fish Tape System is the world's first battery powered fish tape solution. The fish tape wire puller's AUTO-RUN™ Powered Feed and Retract eliminates manual pulling tools for less user fatigue and automatically reels the tape back into the Replacement Cartridge for a cleaner jobsite. The electric fish tape wire puller features a POWERSTATE™ Brushless Motor that provides the ability to pull wire through a 200' run with 360° degrees of bends. This new battery powered fish tape puller is more efficient with an automatic feed that pushes through bends faster for maximum jobsite efficiency. The M18 FUEL™ ANGLER™ Pulling Fish Tape Powered Base is powered by the M18™ REDLITHIUM™ battery pack (not included) and is compatible with 3 Less Binding steel and non-conductive Replacement Cartridges to tackle any situation. The automatic wire puller is equipped with REDLINK PLUS™ Intelligence to ensure maximum performance and protection from overload.
Features
- Power to Pull 200' through 360-Degree Bends Faster
- AUTO-RUN™ Powered Feed & Retract for Reduced Muscle Effort
- Less Binding Replacement Cartridge Design Delivers Easiest Payout and Wind-up
- Tape automatically retracts into cartridge for a cleaner jobsite
- Automatic feed pushes through bends faster
- Compatible with 3 interchangeable replacement cartridges up to 240' steel and 100' non-conductive
- Variable speed trigger for maximum control
- Durable powered base and replaceable cartridges deliver the longest lasting solution
- Quick-change latches for easy replacement cartridge swap out
- Compatible with All M18™ Batteries
Specifications
| Application | Fish Tape Pulling |
| Material | Reinforced Nylon |
| Color / Finish | Red/Black |
| Actuation Type | Motorized |
| Package Quantity | 1 |
Features
- Hollow shaft magnetic nut driver for long bolts, studs or threaded rod
- Impact rated for the most aggressive power tools
- 1/4 hex quick connect with wrench assist
- Made in the USA
Specifications
| Style Name | 9/16-Inch Tip |
| Size Name | 5-Inch Length |
| Hollow Depth | 3.625" (9.2 cm) |
| Shaft Length | 5" (12.7 cm) |
| Application | Long Bolts, Studs or Threaded Rod |
| Nut Driver Sizes | 9/16" |
| Overall Length | 6.328" (16.1 cm) |
| Measurement Standard | SAE |
| Height | 0.8100 in |
| Width | 0.8100 in |
| Depth | 5.0000 in |
| Weight | 0.2250 lbs |
The MILWAUKEE® M18 FUEL™ ANGLER™ 240' x 1/8" Steel Pulling Fish Tape Replacement Cartridge is part of the world's first battery powered fish tape solution. The steel fish tape puller features AUTO-RUN™ Powered Feed and Retract that eliminates manual operation for less user fatigue and automatically reels the tape back into the Replacement Cartridge for a cleaner jobsite. The steel fish tape puller has blue tempered steel tape for improved flexibility and durability with an anti-catch tip for continuous fishing. This ANGLER™ has the ability to pull wire through a 240' run with 360° degrees of bends and is compatible with any of Milwaukee's 3 Less Binding steel and non-conductive Replacement Cartridges to tackle any situation.
Features
- Low Friction Case
- Flexible Blue Tempered Steel
- High Visibility Laser Etched Markings
- Multi-Position Handle
- Square Inner Grip
- Anti-Catch Tip
- Power to Pull 200' through 360-Degree Bends Faster
- AUTO-RUN™ Powered Feed & Retract for Reduced Muscle Effort
- Less Binding Replacement Cartridge Design Delivers Easiest Payout and Wind-up
- Tape automatically retracts into Replacement Cartridge for a cleaner jobsite
- Blue tempered steel tape for improved flexibility and durability
- Low friction replacement cartridge design for smooth payout
- Anti-catch tip for continuous fishing
- Reinforced anchor points for improved durability
- Quick-change latches for easy replacement cartridge swap out
- Part of the ANGLER™ Interchangeable Pulling Fish Tape System
Specifications
| Application | Fish Tape Pulling |
| Material | Steel |
| Color / Finish | Red/Black |
| Length | 240 ft |
| Actuation Type | Not Motorized |
| Package Quantity | 1 |
The MILWAUKEE® M18 FUEL™ ANGLER™ 100' Non-Conductive Polyester Pulling Fish Tape Replacement Cartridge is part of the world's first battery powered fish tape solution. The steel fish tape puller features AUTO-RUN™ Powered Feed and Retract that eliminates manual operation for less user fatigue and automatically reels the tape back into the Replacement Cartridge for a cleaner jobsite. The non-conductive fish tape puller has high flexibility, thicker polyester tape for easier fishing with a triple strand design to prevent kinking. The electrical fish tape with a plastic tip provides a fully non-conductive solution for maximum jobsite safety. This ANGLER™ has the ability to pull wire through a 100' run with 360° degrees of bends and is compatible with any of Milwaukee's 3 Less Binding steel and non-conductive Replacement Cartridges to tackle any situation.
Features
- Low Friction Case
- Flexible Blue Tempered Steel
- High Visibility Laser Etched Markings
- Multi-Position Handle
- Square Inner Grip
- Anti-Catch Tip
- Power to Pull 200' through 360-Degree Bends Faster
- AUTO-RUN™ Powered Feed & Retract for Reduced Muscle Effort
- Less Binding Replacement Cartridge Design Delivers Easiest Payout and Wind-up
- Tape automatically retracts into Replacement Cartridge for a cleaner jobsite
- High flexibility, thicker polyester tape for easier fishing
- Triple strand design to prevent kinking
- Low friction replacement cartridge design for smooth payout
- Plastic tip provides a fully non-conductive solution
- Reinforced anchor points for improved durability
- Anti-catch tip for continuous fishing
- Quick-change latches for easy replacement cartridge swap out
- Part of the ANGLER™ Interchangeable Pulling Fish Tape System
Specifications
| Application | Fish Tape Pulling |
| Material | Polyester |
| Color / Finish | Red/Black |
| Length | 100 ft |
| Actuation Type | Not Motorized |
| Package Quantity | 1 |
Features
- Smooth pay out, easier fishing
- Low friction case for smooth pay out
- Flexible blue tempered steel
- Low friction case
- High visibility laser etched markings
- 240 Ft. length
- 1/8 in. width
- Multi-position handle
- Square inner grip
- Anti-catch tip
Specifications
| Fish Wire / Tape Material | Steel |
| Handle Type | Multi-Position |
| Length | 240 ft |
| Magnetic | No |
| Case Included | Yes |
| Color / Finish | Red/Black |
| Electrical Accessory Type | Tool |
| Handle Material | Plastic |
| Package Contents | (1) 240 ' 1/8" Steel Fish Tape |
| Package Quantity | 1 |
| Reel Material | Plastic |
Features
- Sets rivets at right angle or straight-on, with a simple twist of rivet head
- Rugged die-cast metal construction for long life
- Extra nose pieces and wrench are conveniently stored in handle
- Long handle makes riveter easy to squeeze
- Uses 1/8", 3/32", 5/32" & 3/16" diameter steel & aluminum rivets
- Rivets in hard to get places
Specifications
| Length | 13.5 in |
| Width | 6 in |
| Height | 1.4 in |
| Weight | 2.042 lbs |
| Battery Test Summary | STANLEY_UN38.3 LITHIUM TEST SUMMARY_Rev_1,2.pdf |
| Net Lit-Ion Y/N | No |
| Warranty | 1YW |
| Case Type | N/A (no case) |
| Compatibility | 1/8, 3/32, 5/32, 3/16 |
| Handle Material | Rubber |
| Mandrel Wrench Included | No |
| Rivet Gun Nose Reach | 1.850000 |
| Rivets Included | No |
| Swivel | Yes |
The Klein Tools' 240-Foot High Carbon Steel Fish Tape is perfect for wire runs associated with commercial, residential and voice-data-video installations. The optimized housing and handle design decreases payout effort and reduces binding. A multiple-position handle allows for a firm, steady grip as you pull or rewind the tape. The unique interior case shape combines the leverage of square cases and the comfort of round cases, which makes rewinding tape after a long run easier. The tape features laser-etched descending markings placed at every foot. These markings allow you to accurately measure the depth of conduit runs and determine the amount of tape left to pay out.
Features
- Durable, high-carbon strength 1/8-Inch wide steel fish tapes are firm yet flexible for long runs and large wire pulls
- Case design decreases payout effort and friction by optimizing the tape payout angle
- Slip-resistant housing geometry improves winding power and reduces binding
- Multi-position handle gives you a firm, steady grip as you pull or rewind tape from the case
- Descending laser etched markings in 1-Foot (0.3 m) increments allow you to more accurately measure conduit runs and the amount of tape left to pay out
- Protective coating on the steel tape reduces corrosion from non-contact moisture and humidity
- Polypropylene case and handle offer high impact resistance
- U.S. Patents: 8164025; 8168921; 8212178; 9895773; 10099316
- Optimized Housing Design, High Carbon Steel
- Case design decreases payout effort and friction by optimizing the tape payout angle; slip-resistant geometry improves winding power and reduces binding
- Made in the US with Global Components
Specifications
| Style Name | Stell |
| Tape End | Double Loop Steel |
| Overall Length | 1.85" (4.7 cm) |
| Overall Width | 12.35" (31.4 cm) |
| Diameter | 13" (33 cm) |
| Material | Steel |
| Type | Steel Fish Tape |
| Tape Size | 240' x 1/8" x 0.062" (73.2 m x 0.3 cm x 0.2 cm) |
| Color | Orange/Black |
| Overall Height | 16.21" (41.2 cm) |
| Application | Wire Pulling |
| Height | 16.2100 in |
| Width | 1.8500 in |
| Depth | 12.3500 in |
| Weight | 7.8800 lbs |
Features
- Die cast frame and through hardened steel components for extreme durability
Specifications
| Length | 14.3 in |
| Width | 5.6 in |
| Height | 1.9 in |
| Weight | 2.603 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Warranty | 1LW |
| Individual Vs. Set (Syndigo) | SET |