Power Tool Accessories
Kinnunen offers an extensive selection of power tool accessories to help you get the most out of your tools. From batteries and chargers to jobsite radios, power tool parts and more, we have everything you need to maximize your productivity. Whatever the task at hand, Kinnunen has the power tool accessories you need to get the job done right.Our customer service professionals receive the best industry training available. So, if you have any questions about what accessories are right for your power tool, we have an answer. Simply call us at 1-800-432-8979 or fill out our contact form.
7/64" 175-AG SUPER PREMIUM
1/8" 175-AG SUPER PREMIUM
Tackle the hardest edging jobs and aluminum oxide finishes with this durable Red Heat H955 CA coarse grit paper H&L edger disc. Its powerful ceramic alumina grain keeps an exceptionally sharp cutting surface that works fast and leaves the cleanest scratch pattern and smoothest finish possible on parquet and some of the hardest wood floors in common use. This disc uses an ultra-tough, stiff F-weight backing to resist tearing and snagging and to make aggressive cuts through tough material, while assured color consistency ensures no color transfer on the finish. A hook-and-loop back makes it simple to mount and change discs.
Features
- 100%, exceptionally sharp, fastest cutting, ceramic alumina grain delivers the cleanest scratch pattern and smoothest finishes in the industry
- Ultra- tough, stiff F-weight backing cuts more aggressively, and resists tearing and snagging
- No risk of color transfer with assured color consistency
- Best coarse grit choice for edger jobs on harder A/O finishes, hardest wood species, and parquet and multi-species floors; hook and loop back for easy disc mounting and changing
Applications
- Floor Sanding
- Sanding
Specifications
| Diameter | 5 in. |
| Abrasive | Ceramic Alumina |
| Attachment | Hook & Loop |
| Backing Material | F-wt. Paper |
| Abrasive Type | Coated |
| Max Operating Speed RPM | 3200 |
| Grade | Coarse |
| Grit Size | P80 |
Reach for the Red Heat H955 CA medium grit paper H&L edger disc for your large medium grit edger jobs. Stiff F-weight paper backing provides an ultra-tough construction that resists tearing and snagging while offering aggressive cuts. Designed to work on harder A/O finishes and the hardest wood species and made from 100-percent ceramic alumina grain, this exceptionally sharp disc cuts quickly with a clean scratch pattern and the smoothest finishes in the industry. Ensure color consistency on your products with no risk of color transfer.
Features
- 100%, exceptionally sharp, fastest cutting, ceramic alumina grain delivers the cleanest scratch pattern and smoothest finishes in the industry
- Ultra- tough, stiff F-weight paper backing cuts more aggressively, and resists tearing and snagging
- No risk of color transfer with assured color consistency
- Best choice for larger medium grit edger jobs on harder A/O finishes and hardest wood species; hook
Applications
- Floor Sanding
- Sanding
Specifications
| Diameter | 5 in. |
| Abrasive | Ceramic Alumina |
| Attachment | Hook & Loop |
| Backing Material | F-wt. Paper |
| Abrasive Type | Coated |
| Grit Size | P100 |
| Grade | Medium |
| Max Operating Speed RPM | 3200 |
Features
- Provides smooth operation and maximum tool control
- Double cut (Alternate cut) is the most popular bur in ferrous applications
- Manufactured with cuts made on the left and right spirals to produce a finer finish on material resulting in smaller chips and slivers
- Excellent for confined or hard-to-reach areas
- Use for deburring, finishing, shaping and enlarging holes, removing welds, and smoothing castings
Applications
- Grinding
- Deburring
- Finishing
Specifications
| Diameter | 1/2" |
| Overall Length | 2-1/5" |
| Shank Diameter | 1/4" |
| Type | SD5 |
| Max RPM | 16000 |
Features
- Provides smooth operation and maximum tool control
- Double cut (Alternate cut) is the most popular bur in ferrous applications
- Manufactured with cuts made on the left and right spirals to produce a finer finish on material resulting in smaller chips and slivers
- Excellent for confined or hard-to-reach areas
- Use for deburring, finishing, shaping and enlarging holes, removing welds, and smoothing castings
Applications
- Grinding
- Deburring
- Finishing
Specifications
| Diameter | 1/2" |
| Overall Length | 2-3/4" |
| Shank Diameter | 1/4" |
| Type | SG5 |
| Max RPM | 16000 |
The MILWAUKEE® 25/32" HOLE DOZER™ Bi-Metal Hole Saws new 3.5 TPI tooth design offers the longest life in metal applications. These HOLE DOZER™ Bi-Metal Hole Saws feature the industry's only Lifetime Tooth Break Warranty and take on all general purpose applications, making them the most durable hole saws. Our ALL-ACCESS SLOTS solve the frustration of plug removal for more productivity with less downtime between holes. The new slot design also offers increased pilot visibility for accurate placement and faster chip ejection keeping the cut cool. HOLE DOZER™ Thermoset Coating allows for faster cutting and is optimized for cordless tools, delivering 25% more holes per charge. Milwaukee HOLE DOZER™ Bi-Metal hole saws are proudly made in the USA.
Features
- Most Durable Hole Saw. Period.
- New 3.5 TPI Tooth Design
- All Access Slots enhance user productivity by providing best access and leverage to remove material slugs
- Increased Pilot Visibility for Accurate Hole Saw Placement
- Thermoset Coating reduces friction and drag, increasing overall speed and cordless efficiencies
- RIP GUARD™ Limited Lifetime Tooth Break Warranty
- Made in USA
- For use in general purpose applications such as thick/thin metals, aluminum, drywall, plastics, wood, wood with nails
- 1-5/8" Cutting Depth
Specifications
| Bit Type | Hole Saw |
| Depth | 1.06 Inches |
| Drilling Depth | 1.7 in |
| Material | High Speed Steel |
| Package Quantity | 1 |
| Teeth Per Inch (TPI) | 3/5 |
Quickly remove stock from stainless steel, cast iron, titanium, and super alloys with the Metal R828 coarse grit center mount fiberglass heavy duty conical flap disc. When used with a right angle grinder, this all-purpose disc also makes short work of grit blending, deburring, and stock removal thanks to the sharp zirconia grain. Ideal for contouring and edge work, the disc features angled cotton and polyester flaps that ensure speed and efficiency with greater surface contact. The lightweight resin and fiberglass backing plates diminish vibration for enhanced comfort during use.
Features
- Type 29 conical flap discs with durable zirconia grain provide good cut and life for all-purpose work
- Angled, polyester/cotton flaps provide greater surface contact and are the best choice when speed of job completion and stock removal are primary considerations; may be used on contour and edge work
- Their fiberglass/resin backing plates are the most popular plate configuration due to high strength, light weight, ability to absorb vibration, and operator comfort
- Good choice for coarse grit blending, deburring, and stock removal
Applications
- Beveling
- Blending
- Deburring
- Stock Removal
Specifications
| Diameter | 4-1/2 in. |
| Abrasive | Zirconia Alumina |
| Attachment | Center Mount |
| Backing Material | X-wt. Cotton |
| Abrasive Type | Coated |
| Grade | Extra Coarse |
| Max Operating Speed RPM | 13300 |
| Grit Size | P40 |
| Arbor hole | 7/8 In. |
Quickly remove stock from stainless steel, cast iron, titanium, and super alloys with the Metal R828 coarse grit center mount fiberglass heavy duty conical flap disc. When used with a right angle grinder, this all-purpose disc also makes short work of grit blending, deburring, and stock removal thanks to the sharp zirconia grain. Ideal for contouring and edge work, the disc features angled cotton and polyester flaps that ensure speed and efficiency with greater surface contact. The lightweight resin and fiberglass backing plates diminish vibration for enhanced comfort during use.
Features
- Type 29 conical flap discs with durable zirconia grain provide good cut and life for all-purpose work
- Angled, polyester/cotton flaps provide greater surface contact and are the best choice when speed of job completion and stock removal are primary considerations; may be used on contour and edge work
- Their fiberglass/resin backing plates are the most popular plate configuration due to high strength, light weight, ability to absorb vibration, and operator comfort
- Good choice for coarse grit blending, deburring, and stock removal
- Fine 80 grit for blending and finishing
Applications
- Beveling
- Blending
- Deburring
- Stock Removal
Specifications
| Length | 20 mm |
| Width | 25 mm |
| Diameter | 4-1/2 In. |
| Grit Size | P80 Grit |
| Abrasive/Mineral | Zirconia Alumina |
| Size Derived | 4-1/2 x 7/8 In. |
| Wheel Type | Type 29 |
| Max Operating Speed | 13300 |
| Backing Material | Heavy Cotton |
| Backing Weight | Y |
| Backing Type | Y-wt. Cotton |
| Color / Finish | Blue |
| Coating Type | Closed |
Count on Gold Reserve A296/H290 coarse grit paper H&L vacuum discs for a consistent finish and fast cuts while generating minimal heat on many substrates. To ensure tear resistance and maintain flexibility, the A296 features a B-weight latex-paper backing, while the H290 includes a heavy-duty E-weight paper backing. With its water-based, No-Fil stearate coating, the A296 helps minimize loading for improved durability. The H290 disc offers an open coat that also reduces loading. Both models come equipped with vacuum holes for excellent dust extraction. Installation and removal are quick and easy due to the NorGrip hook and loop backing.
Features
- P-graded premium aluminum oxide abrasive produces a quick, cool cut and a more consistent surface finish
- A296 has strong B-weight latex/paper backing; H290 has heavy-duty E-weight paper backing; both resist tearing while staying conformable and flexible
- A296 has water-based, non-loading (No-Fil) stearate coating that minimizes clogging and increases disc life; H290 discs' open coat minimizes loading; both have vacuum holes for maximum dust collection and life
- Good choice for coarse grit stripping, blending and sanding on primed or painted surfaces, wood, composites, aluminum and fiberglass; the hook-and-loop backing means quick and easy disc changes and vacuum holes maximize dust extraction and elongate life
Applications
- Blending
- Sanding
- Stripping
Specifications
| Diameter | 6 in. |
| Abrasive | Aluminum Oxide |
| Attachment | Hook & Loop |
| Backing Material | B-wt. Anti Loading Paper, E-wt. Paper |
| Max Operating Speed Guideline | Determined by back-up pad |
| Abrasive Type | Coated |
| Grade | Coarse |
| Max Operating Speed RPM | 15000 |
| Grit Size | P80 |
| Number of holes | 6 |