Screws, Nuts and Bolts

STIHL Auger Bits are built and designed with durability in mind. Every bit design is tested, by STIHL, in a variety of soils across the country. Bit heads are cast from a single piece of heat-treated alloy for outstanding durability and drilling performance. The cutter heads are easy to remove and feature an offset tooth, instead of an installed plate, to improve drilling performance and avoid lockups. Bits also feature a dual flute pilot drill for accurate alignment and straight holes. It all adds up to quality that doesn't compromise  not one bit.

STIHL PICCO™ Micro™ 3 chain is a low-kickback, narrow kerf, smooth-cutting and low-profile chain ideal for small to mid-sized chainsaws with between 1.5 kW (2.0 bhp) and 1.9 kW (2.5 bhp). It performs equally well as compared to the PMM3 chain, with the only difference being a slight increase in weight. This semi-chisel chain does not usually get dull as fast as full-chisel chain in normal use and is easier to maintain and sharpen. Applications: The PM3 chain is ideal for small branches, general cleanup and maintenance around the home or farm. Professionals requiring plunge-cutting should use this chain as well. STIHL recommends using low-kickback, green-labeled chain and green-labeled reduced-kickback bars on all powerheads. Unsure which type of saw chain you need? Download our Saw Chain Selection & Identification Chart for easy reference when replacing your STIHL saw chain.

STIHL PICCO™ Micro™ 3 chain is a low-kickback, narrow kerf, smooth-cutting and low-profile chain ideal for small to mid-sized chainsaws with between 1.5 kW (2.0 bhp) and 1.9 kW (2.5 bhp). It performs equally well as compared to the PMM3 chain, with the only difference being a slight increase in weight. This semi-chisel chain does not usually get dull as fast as full-chisel chain in normal use and is easier to maintain and sharpen. Applications: The PM3 chain is ideal for small branches, general cleanup and maintenance around the home or farm. Professionals requiring plunge-cutting should use this chain as well. STIHL recommends using low-kickback, green-labeled chain and green-labeled reduced-kickback bars on all powerheads. Unsure which type of saw chain you need? Download our Saw Chain Selection & Identification Chart for easy reference when replacing your STIHL saw chain.