Outdoor Power Equipment
Whether your next project is trimming along a sidewalk, removing small trees, or cutting an acre of grass, look no further than Kinnunen. We carry a wide selection of reliable and durable outdoor power equipment to help you take on any task. So, whether you're a professional contractor or just someone who likes to take care of their own yard, Kinnunen has the right tool for you.Our professional customer service associates are ready to answer your questions about mowers, trimmers, chain saws and other types of outdoor power equipment. Call us today at 1-800-432-8979 or fill out our contact form. We are here to help you get the job done right.
The STIHL Diamond Abrasive Chain 36 GBM is the first of its kind ever offered by STIHL. This chain features a pre-sharpened diamond segment on each link, making it immediately ready for cutting concrete and stone. It's designed to deliver high cutting speed, smooth cuts and good performance during plunge cuts. The diamond segments reduce vibration, improving overall cutting speed. A depth gauge between each diamond segment improves chain ruggedness and plunge cut performance. The chain also features a "sandwich" segment design for faster cutting and longer service life. Expected service life is approximately 40-80 linear feet of cutting in 6-inch thick concrete (chain life will vary greatly depending on aggregates and steel reinforcement). Available in 12 inch and 16 inch sizes. Applications: This chain is to be used exclusively with the GS 461 STIHL ROCK BOSS® concrete cutter and the STIHL ROLLOMATIC® G guide bar. The chain is designed to cut concrete, reinforced concrete (with rebar up to 1/2 inch), cinder blocks and masonry (including bricks, asphalt and soft stone such as sandstone). Cutting hard stone such as granite and ductile iron pipe are also approved applications but will reduce the service life of the chain.
Features
- Constructed from a single piece of steel for durability
- Sprocket teeth carry the chain around the tip quickly with little friction or reduction in cutting speed
- Compatible with DEWALT 12 in. Replacement Chain - DWO1DT612
- Compatible with other 12 in. replacement chains - gauge: 0.043 in., Pitch: 3/8 in. low profile
Specifications
| Length | 15.25 in |
| Width | 4.4 in |
| Height | 0.236 in |
| Weight | 0.884 lbs |
| Voltage | 20 V V |
| Battery Type | 20V MAX Lithium Ion |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Disclaimer | Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
| Prop 65 Generic Warning | No |
| Warranty | MWC |
| Claims Needed | Yes |
| Product Material Group | WOOD |
Features
- Constructed from a single piece of steel for durability
- Sprocket teeth carry the chain around the tip quickly with little friction or reduction in cutting speed
- Compatible with DEWALT 16 in. Replacement Chain - DWO1DT616T
- Compatible with other replacement chains - Gauge: 0.043 in., Pitch: 3/8 in. low profile
Specifications
| Length | 19.63 in |
| Width | 4.63 in |
| Height | 0.236 in |
| Weight | 1.172 lbs |
| Voltage | 60 V V |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Disclaimer | Maximum initial battery voltage (measured without a workload) is 60 volts. Nominal voltage is 54. |
| Prop 65 Generic Warning | No |
| Warranty | MWC |
| Claims Needed | Yes |
| Product Material Group | WOOD |
STIHL Auger Bits are built and designed with durability in mind. Every bit design is tested, by STIHL, in a variety of soils across the country. Bit heads are cast from a single piece of heat-treated alloy for outstanding durability and drilling performance. The cutter heads are easy to remove and feature an offset tooth, instead of an installed plate, to improve drilling performance and avoid lockups. Bits also feature a dual flute pilot drill for accurate alignment and straight holes. It all adds up to quality that doesn't compromise not one bit.
Specifications
| Sizes Available For Bt 130/131 | 1.6" (40mm) dia.2.4" (60mm) dia.3.5" (90mm) dia.4.7" (120mm) dia.5.9" (150mm) dia.7.9" (200mm) dia. |
STIHL Auger Bits are built and designed with durability in mind. Every bit design is tested, by STIHL, in a variety of soils across the country. Bit heads are cast from a single piece of heat-treated alloy for outstanding durability and drilling performance. The cutter heads are easy to remove and feature an offset tooth, instead of an installed plate, to improve drilling performance and avoid lockups. Bits also feature a dual flute pilot drill for accurate alignment and straight holes. It all adds up to quality that doesn't compromise not one bit.
Specifications
| Sizes Available For Bt 130/131 | 1.6" (40mm) dia.2.4" (60mm) dia.3.5" (90mm) dia.4.7" (120mm) dia.5.9" (150mm) dia.7.9" (200mm) dia. |
The STIHL Cutquik® Cart is specially designed for use with STIHL cut-off machines when cutting expansion cuts or curbs and a wheeled tool is necessary. This cart offers improved handling and cutting performance with a forward weight orientation and a toolless quick connect system. The cart also features a large deflector as well as sealed bearing wheels to help keep out dust and debris. The handle folds for easy transport, making this lightweight, compact and portable cart an ideal accessory to anyone that uses a cut-off machine. Designed to fit STIHL TS 410, TS 420, TS 500i, TS 700 and TS 800 cut-off machines. Note: A mounting kit will be required to mount the TS unit to the cart, and water tank is sold separately.