S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Concrete Drill Bits
Diablo's Multi-Material Carbide Tipped Hammer Drill Bit range provides faster starts and longer life in tile, masonry, concrete, wood and metal. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill faster holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes in a variety of applications. This range is Impact Strong™ for increased shank stability and durability in cordless and corded impact and drill drivers.
Applications
- Drilling concrete
- tile
- masonry
- wood
- metal
Cuts
- Concrete
- Metal
- Wood
- Brick/Block
- Tile
Features
- 5-Piece Set Offers 40% in Savings
- Diablo made carbide tip withstands impact and high heat applications for superior life versus standard multi-purpose hammer drill bits
- Multi-Ground Grip Point Tip delivers stability and accuracy required for fast, precise holes
- Optimized flute design removes dust/chip build-up faster, keeping the carbide tip cooler for ultimate strength and durability
- Impact Strong™ increases shank stability and durability
- More holes per charge in cordless impact and drill drivers
- Maximum performance in hammer or rotary drilling applications
- Set features 5 bits: (1) 5/32" x 4" x 6", (1) 3/16" x 4" x 6", (1) 1/4" x 4" x 6", (1) 5/16" x 4" x 6" and (1) 3/8" x 4" x 6"
Specifications
| Pack Quantity | 5 |
| Shank | Hex |
Specifications
| Depth | 0.15625 in. |
| Height | 3.50 in. |
| Width | 0.15625 in. |
| Limited Warranty | Limited warranty, available at www.strongtie.com/limited-warranties. |
| Packaging Quantity | 1 |
Specifications
| Depth | 0.15625 in. |
| Height | 5.50 in. |
| Width | 0.15625 in. |
| Limited Warranty | Limited warranty, available at www.strongtie.com/limited-warranties. |
| Packaging Quantity | 1 |
Diablo's SPEEDemon ™ Red Granite Carbide Tipped Hammer Drill Bit range provides one of the fastest and longest lasting drilling solutions on the market for concrete, masonry and stone. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill fast, accurate holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes. This range is Impact Strong™ for increased shank stability and durability in cordless and corded impact and drill drivers.
Features
- 5-Piece Set Offers 20% in Savings
- Diablo made carbide tip withstands impact and high heat applications for superior life versus standard masonry hammer drill bits
- Multi-ground Grip Point Tip delivers stability and accuracy required for fast, precise holes
- Hi-performance brazing and hardening process extends life of carbide tip and increases productivity
- Optimized flute design removes dust faster, keeping the carbide tip cooler for ultimate strength and durability
- Impact Strong™ increases shank stability and durability
- More holes per charge in cordless impact and drill drivers
- Maximum performance in hammer or rotary drilling applications
Applications
- Drilling concrete
- masonry
- stone
Cuts
- Concrete
- Masonry
- Stone
Specifications
| Diameter | 3/16" |
| Length | 6" |
| Pack Quantity | 5 |
| Shank | Hex |
| Working Length | 4" |
Diablo's SPEEDemon ™ Red Granite Carbide Tipped Hammer Drill Bit range provides one of the fastest and longest lasting drilling solutions on the market for concrete, masonry and stone. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill fast, accurate holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes. This range is Impact Strong™ for increased shank stability and durability in cordless and corded impact and drill drivers. This range delivers extreme durability in cordless and corded impact and drill drivers.
Cuts
- Concrete
- Masonry
- Stone
Features
- Diablo made carbide tip withstands impact and high heat applications for superior life versus standard masonry hammer drill bits
- Multi-ground Grip Point Tip delivers stability and accuracy required for fast, precise holes
- Hi-performance brazing and hardening process extends life of carbide tip and increases productivity
- Optimized flute design removes dust faster, keeping the carbide tip cooler for ultimate strength and durability
- More holes per charge in cordless impact and drill drivers
- Maximum performance in hammer or rotary drilling applications
Applications
- Drilling concrete
- masonry
- stone
Specifications
| Diameter | 5/8" |
| Length | 12" |
| Pack Quantity | 1 |
| Shank | SDS |
| Working Length | 10" |
Diablo's SPEEDemon ™ Red Granite Carbide Tipped Hammer Drill Bit range provides one of the fastest and longest lasting drilling solutions on the market for concrete, masonry and stone. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill fast, accurate holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes. This range is Impact Strong™ for increased shank stability and durability in cordless and corded impact and drill drivers. This range delivers extreme durability in cordless and corded impact and drill drivers.
Cuts
- Concrete
- Masonry
- Stone
Features
- Diablo made carbide tip withstands impact and high heat applications for superior life versus standard masonry hammer drill bits
- Multi-ground Grip Point Tip delivers stability and accuracy required for fast, precise holes
- Hi-performance brazing and hardening process extends life of carbide tip and increases productivity
- Optimized flute design removes dust faster, keeping the carbide tip cooler for ultimate strength and durability
- More holes per charge in cordless impact and drill drivers
- Maximum performance in hammer or rotary drilling applications
Applications
- Drilling concrete
- masonry
- stone
Specifications
| Diameter | 3/4" |
| Length | 6" |
| Pack Quantity | 1 |
| Shank | SDS |
| Working Length | 4" |
Diablo's SPEEDemon ™ Red Granite Carbide Tipped Hammer Drill Bit range provides one of the fastest and longest lasting drilling solutions on the market for concrete, masonry and stone. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill fast, accurate holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes. This range is Impact Strong™ for increased shank stability and durability in cordless and corded impact and drill drivers. This range delivers extreme durability in cordless and corded impact and drill drivers.
Applications
- Drilling concrete
- masonry
- stone
Features
- Diablo made carbide tip withstands impact and high heat applications for superior life versus standard masonry hammer drill bits
- Multi-ground Grip Point Tip delivers stability and accuracy required for fast, precise holes
- Hi-performance brazing and hardening process extends life of carbide tip and increases productivity
- Optimized flute design removes dust faster, keeping the carbide tip cooler for ultimate strength and durability
- More holes per charge in cordless impact and drill drivers
- Maximum performance in hammer or rotary drilling applications
Cuts
- Concrete
- Masonry
- Stone
Specifications
| Diameter | 3/4" |
| Length | 12" |
| Pack Quantity | 1 |
| Shank | SDS |
| Working Length | 10" |
Features
- Deep single flute removes dust fast for increased drilling speed and longer bit life
- Diamond ground tip has aggressive cutting angles for increased drilling speed
- Fits all hammer drills with 3-jaw or Jacobs chuck
- Tungsten carbide tip is durable when drilling in concrete and brick
Specifications
| Length | 1.875 in |
| Width | 0.63 in |
| Height | 8.5 in |
| Weight | 0.413 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Claims Needed | No |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Diablo's SPEEDemon ™ Red Granite Carbide Tipped Hammer Drill Bit range provides one of the fastest and longest lasting drilling solutions on the market for concrete, masonry and stone. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill fast, accurate holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes. This range is Impact Strong™ for increased shank stability and durability in cordless and corded impact and drill drivers. This range delivers extreme durability in cordless and corded impact and drill drivers.
Applications
- Drilling concrete
- masonry
- stone
Features
- Diablo made carbide tip withstands impact and high heat applications for superior life versus standard masonry hammer drill bits
- Multi-ground Grip Point Tip delivers stability and accuracy required for fast, precise holes
- Hi-performance brazing and hardening process extends life of carbide tip and increases productivity
- Optimized flute design removes dust faster, keeping the carbide tip cooler for ultimate strength and durability
- More holes per charge in cordless impact and drill drivers
- Maximum performance in hammer or rotary drilling applications
Cuts
- Concrete
- Masonry
- Stone
Specifications
| Diameter | 1" |
| Length | 12" |
| Pack Quantity | 1 |
| Shank | SDS |
| Working Length | 10" |
Features
- Tungsten carbide tip for durability in concrete and brick
- Deep single flute removes drilling dust fast
Specifications
| Length | 1.875 in |
| Width | 0.375 in |
| Height | 5.75 in |
| Weight | 0.04 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Claims Needed | No |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Diablo's revolutionary, most complete range of SDS-Plus and SDS-Max Rebar Demon™ 4-cutter full-carbide head hammer drill bits are the only bits designed to be the most durable, fastest and coolest solutions on the market. The Rebar Demon bits feature up to 2X more Dura-Carbide to withstand up to 1800°F of intense heat whereas standard bits fail at 800°F. Diablo's impact resistant 4-cutter full-carbide head withstands the stress of high-powered hammer drills and the impact of rebar by taking small bites of rebar to deliver controlled carbide wear, reduced vibration and up to 7X longer life. Produced with Tri-Metal Fusion Welding, the full-carbide head resists heat and prevents breakage in extreme impact situations. Precision Tip delivers the stability and accuracy required to produce fast, precise holes in reinforced concrete for anchor setting.
Cuts
- Reinforced Concrete
- Concrete
- Rebar
- Brick/Block
Features
- Up to 7X longer life versus standard 2-cutter hammer drill bits
- Diablo made Dura-Carbide™ features up to 2X more carbide that withstands up to 1800°F of intense heat to combat rebar hits versus standard bits that fail at 800°F
- Impact Resistant 4-Cutter Full Carbide Head extracts smaller bites of rebar for controlled, consistent carbide wear and reduced vibration to deliver fast, precise holes
- Tri-Metal Fusion Welding features up to 3X stronger weld to keep the full carbide head intact during extreme impact such as rebar
- Precision Tip delivers stability and accuracy required for fast, precise holes
- Optimized flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability
- Wear mark indicator ensures precise hole making
- Optimized for maximum performance in corded and cordless SDS Plus or SDS Max rotary hammers
Applications
- Reinforced concrete and concrete
Specifications
| Diameter | 1" |
| Length | 18" |
| Number of Cutters | 4 |
| Pack Quantity | 1 |
| Shank | SDS Plus |
| Head Type | Full Carbide Head |
| Working Length | 16" |
Diablo's revolutionary, most complete range of SDS-Plus and SDS-Max Rebar Demon™ 4-cutter full-carbide head hammer drill bits are the only bits designed to be the most durable, fastest and coolest solutions on the market. The Rebar Demon bits feature up to 2X more Dura-Carbide to withstand up to 1800°F of intense heat whereas standard bits fail at 800°F. Diablo's impact resistant 4-cutter full-carbide head withstands the stress of high-powered hammer drills and the impact of rebar by taking small bites of rebar to deliver controlled carbide wear, reduced vibration and up to 7X longer life. Produced with Tri-Metal Fusion Welding, the full-carbide head resists heat and prevents breakage in extreme impact situations. Precision Tip delivers the stability and accuracy required to produce fast, precise holes in reinforced concrete for anchor setting.
Features
- Up to 7X longer life versus standard 2-cutter hammer drill bits
- Diablo made Dura-Carbide™ features up to 2X more carbide that withstands up to 1800°F of intense heat to combat rebar hits versus standard bits that fail at 800°F
- Impact Resistant 4-Cutter Full Carbide Head extracts smaller bites of rebar for controlled, consistent carbide wear and reduced vibration to deliver fast, precise holes
- Tri-Metal Fusion Welding features up to 3X stronger weld to keep the full carbide head intact during extreme impact such as rebar
- Precision Tip delivers stability and accuracy required for fast, precise holes
- Optimized flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability
- Wear mark indicator ensures precise hole making
- Optimized for maximum performance in corded and cordless SDS Plus or SDS Max rotary hammers
Cuts
- Reinforced Concrete
- Concrete
- Rebar
- Brick/Block
Applications
- Reinforced concrete and concrete
Specifications
| Diameter | 1" |
| Length | 10" |
| Number of Cutters | 4 |
| Pack Quantity | 1 |
| Shank | SDS Plus |
| Head Type | Full Carbide Head |
| Working Length | 8" |
Diablo's revolutionary, most complete range of SDS-Plus and SDS-Max Rebar Demon™ 4-cutter full-carbide head hammer drill bits are the only bits designed to be the most durable, fastest and coolest solutions on the market. The Rebar Demon bits feature up to 2X more Dura-Carbide to withstand up to 1800°F of intense heat whereas standard bits fail at 800°F. Diablo's impact resistant 4-cutter full-carbide head withstands the stress of high-powered hammer drills and the impact of rebar by taking small bites of rebar to deliver controlled carbide wear, reduced vibration and up to 7X longer life. Produced with Tri-Metal Fusion Welding, the full-carbide head resists heat and prevents breakage in extreme impact situations. Precision Tip delivers the stability and accuracy required to produce fast, precise holes in reinforced concrete for anchor setting.
Cuts
- Reinforced Concrete
- Concrete
- Rebar
- Brick/Block
Features
- Up to 7X longer life versus standard 2-cutter hammer drill bits
- Diablo made Dura-Carbide™ features up to 2X more carbide that withstands up to 1800°F of intense heat to combat rebar hits versus standard bits that fail at 800°F
- Impact Resistant 4-Cutter Full Carbide Head extracts smaller bites of rebar for controlled, consistent carbide wear and reduced vibration to deliver fast, precise holes
- Tri-Metal Fusion Welding features up to 3X stronger weld to keep the full carbide head intact during extreme impact such as rebar
- Precision Tip delivers stability and accuracy required for fast, precise holes
- Optimized flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability
- Wear mark indicator ensures precise hole making
- Optimized for maximum performance in corded and cordless SDS Plus or SDS Max rotary hammers
Applications
- Reinforced concrete and concrete
Specifications
| Diameter | 9/16" |
| Length | 6" |
| Number of Cutters | 4 |
| Pack Quantity | 1 |
| Shank | SDS Plus |
| Head Type | Full Carbide Head |
| Working Length | 4" |
Diablo's revolutionary, most complete range of SDS-Plus and SDS-Max Rebar Demon™ 4-cutter full-carbide head hammer drill bits are the only bits designed to be the most durable, fastest and coolest solutions on the market. The Rebar Demon bits feature up to 2X more Dura-Carbide to withstand up to 1800°F of intense heat whereas standard bits fail at 800°F. Diablo's impact resistant 4-cutter full-carbide head withstands the stress of high-powered hammer drills and the impact of rebar by taking small bites of rebar to deliver controlled carbide wear, reduced vibration and up to 7X longer life. Produced with Tri-Metal Fusion Welding, the full-carbide head resists heat and prevents breakage in extreme impact situations. Precision Tip delivers the stability and accuracy required to produce fast, precise holes in reinforced concrete for anchor setting.
Features
- Up to 7X longer life versus standard 2-cutter hammer drill bits
- Diablo made Dura-Carbide™ features up to 2X more carbide that withstands up to 1800°F of intense heat to combat rebar hits versus standard bits that fail at 800°F
- Impact Resistant 4-Cutter Full Carbide Head extracts smaller bites of rebar for controlled, consistent carbide wear and reduced vibration to deliver fast, precise holes
- Tri-Metal Fusion Welding features up to 3X stronger weld to keep the full carbide head intact during extreme impact such as rebar
- Precision Tip delivers stability and accuracy required for fast, precise holes
- Optimized flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability
- Wear mark indicator ensures precise hole making
- Optimized for maximum performance in corded and cordless SDS Plus or SDS Max rotary hammers
Cuts
- Reinforced Concrete
- Concrete
- Rebar
- Brick/Block
Applications
- Reinforced concrete and concrete
Specifications
| Diameter | 1/4" |
| Length | 8" |
| Number of Cutters | 4 |
| Pack Quantity | 25 |
| Shank | SDS Plus |
| Head Type | Full Carbide Head |
| Working Length | 6" |
Diablo's revolutionary, most complete range of SDS-Plus and SDS-Max Rebar Demon™ 4-cutter full-carbide head hammer drill bits are the only bits designed to be the most durable, fastest and coolest solutions on the market. The Rebar Demon bits feature up to 2X more Dura-Carbide to withstand up to 1800°F of intense heat whereas standard bits fail at 800°F. Diablo's impact resistant 4-cutter full-carbide head withstands the stress of high-powered hammer drills and the impact of rebar by taking small bites of rebar to deliver controlled carbide wear, reduced vibration and up to 7X longer life. Produced with Tri-Metal Fusion Welding, the full-carbide head resists heat and prevents breakage in extreme impact situations. Precision Tip delivers the stability and accuracy required to produce fast, precise holes in reinforced concrete for anchor setting.
Applications
- Reinforced concrete and concrete
Cuts
- Reinforced Concrete
- Concrete
- Rebar
- Brick/Block
Features
- Up to 7X longer life versus standard 2-cutter hammer drill bits
- Diablo made Dura-Carbide™ features up to 2X more carbide that withstands up to 1800°F of intense heat to combat rebar hits versus standard bits that fail at 800°F
- Impact Resistant 4-Cutter Full Carbide Head extracts smaller bites of rebar for controlled, consistent carbide wear and reduced vibration to deliver fast, precise holes
- Tri-Metal Fusion Welding features up to 3X stronger weld to keep the full carbide head intact during extreme impact such as rebar
- Precision Tip delivers stability and accuracy required for fast, precise holes
- Optimized flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability
- Wear mark indicator ensures precise hole making
- Optimized for maximum performance in corded and cordless SDS Plus or SDS Max rotary hammers
Specifications
| Diameter | 7/16" |
| Length | 8" |
| Number of Cutters | 4 |
| Pack Quantity | 1 |
| Shank | SDS Plus |
| Head Type | Full Carbide Head |
| Working Length | 6" |
Diablo's revolutionary, most complete range of SDS-Plus and SDS-Max Rebar Demon™ 4-cutter full-carbide head hammer drill bits are the only bits designed to be the most durable, fastest and coolest solutions on the market. The Rebar Demon bits feature up to 2X more Dura-Carbide to withstand up to 1800°F of intense heat whereas standard bits fail at 800°F. Diablo's impact resistant 4-cutter full-carbide head withstands the stress of high-powered hammer drills and the impact of rebar by taking small bites of rebar to deliver controlled carbide wear, reduced vibration and up to 7X longer life. Produced with Tri-Metal Fusion Welding, the full-carbide head resists heat and prevents breakage in extreme impact situations. Precision Tip delivers the stability and accuracy required to produce fast, precise holes in reinforced concrete for anchor setting.
Cuts
- Reinforced Concrete
- Concrete
- Rebar
- Brick/Block
Features
- Up to 7X longer life versus standard 2-cutter hammer drill bits
- Diablo made Dura-Carbide™ features up to 2X more carbide that withstands up to 1800°F of intense heat to combat rebar hits versus standard bits that fail at 800°F
- Impact Resistant 4-Cutter Full Carbide Head extracts smaller bites of rebar for controlled, consistent carbide wear and reduced vibration to deliver fast, precise holes
- Tri-Metal Fusion Welding features up to 3X stronger weld to keep the full carbide head intact during extreme impact such as rebar
- Precision Tip delivers stability and accuracy required for fast, precise holes
- Optimized flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability
- Wear mark indicator ensures precise hole making
- Optimized for maximum performance in corded and cordless SDS Plus or SDS Max rotary hammers
Applications
- Reinforced concrete and concrete
Specifications
| Diameter | 1-1/8" |
| Length | 18" |
| Number of Cutters | 4 |
| Pack Quantity | 1 |
| Shank | SDS Plus |
| Head Type | Full Carbide Head |
| Working Length | 16" |
Diablo's revolutionary, most complete range of SDS-Plus and SDS-Max Rebar Demon™ 4-cutter full-carbide head hammer drill bits are the only bits designed to be the most durable, fastest and coolest solutions on the market. The Rebar Demon bits feature up to 2X more Dura-Carbide to withstand up to 1800°F of intense heat whereas standard bits fail at 800°F. Diablo's impact resistant 4-cutter full-carbide head withstands the stress of high-powered hammer drills and the impact of rebar by taking small bites of rebar to deliver controlled carbide wear, reduced vibration and up to 7X longer life. Produced with Tri-Metal Fusion Welding, the full-carbide head resists heat and prevents breakage in extreme impact situations. Precision Tip delivers the stability and accuracy required to produce fast, precise holes in reinforced concrete for anchor setting.
Features
- Up to 7X longer life versus standard 2-cutter hammer drill bits
- Diablo made Dura-Carbide™ features up to 2X more carbide that withstands up to 1800°F of intense heat to combat rebar hits versus standard bits that fail at 800°F
- Impact Resistant 4-Cutter Full Carbide Head extracts smaller bites of rebar for controlled, consistent carbide wear and reduced vibration to deliver fast, precise holes
- Tri-Metal Fusion Welding features up to 3X stronger weld to keep the full carbide head intact during extreme impact such as rebar
- Precision Tip delivers stability and accuracy required for fast, precise holes
- Optimized flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability
- Wear mark indicator ensures precise hole making
- Optimized for maximum performance in corded and cordless SDS Plus or SDS Max rotary hammers
Cuts
- Reinforced Concrete
- Concrete
- Rebar
- Brick/Block
Applications
- Reinforced concrete and concrete
Specifications
| Diameter | 9/16" |
| Length | 18" |
| Number of Cutters | 4 |
| Pack Quantity | 1 |
| Shank | SDS Plus |
| Head Type | Full Carbide Head |
| Working Length | 16" |
Diablo's revolutionary, most complete range of SDS-Plus and SDS-Max Rebar Demon™ 4-cutter full-carbide head hammer drill bits are the only bits designed to be the most durable, fastest and coolest solutions on the market. The Rebar Demon bits feature up to 2X more Dura-Carbide to withstand up to 1800°F of intense heat whereas standard bits fail at 800°F. Diablo's impact resistant 4-cutter full-carbide head withstands the stress of high-powered hammer drills and the impact of rebar by taking small bites of rebar to deliver controlled carbide wear, reduced vibration and up to 7X longer life. Produced with Tri-Metal Fusion Welding, the full-carbide head resists heat and prevents breakage in extreme impact situations. Precision Tip delivers the stability and accuracy required to produce fast, precise holes in reinforced concrete for anchor setting.
Cuts
- Reinforced Concrete
- Concrete
- Rebar
- Brick/Block
Features
- Up to 7X longer life versus standard 2-cutter hammer drill bits
- Diablo made Dura-Carbide™ features up to 2X more carbide that withstands up to 1800°F of intense heat to combat rebar hits versus standard bits that fail at 800°F
- Impact Resistant 4-Cutter Full Carbide Head extracts smaller bites of rebar for controlled, consistent carbide wear and reduced vibration to deliver fast, precise holes
- Tri-Metal Fusion Welding features up to 3X stronger weld to keep the full carbide head intact during extreme impact such as rebar
- Precision Tip delivers stability and accuracy required for fast, precise holes
- Optimized flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability
- Wear mark indicator ensures precise hole making
- Optimized for maximum performance in corded and cordless SDS Plus or SDS Max rotary hammers
Applications
- Reinforced concrete and concrete
Specifications
| Diameter | 9/16" |
| Length | 12" |
| Number of Cutters | 4 |
| Pack Quantity | 1 |
| Shank | SDS Plus |
| Head Type | Full Carbide Head |
| Working Length | 10" |
Features
- Cuts embedded rebar up to 1-1/2"
- Rebar cutters are not for enlarging holes
- The size of the rebar cutter must match the size of the drill bit used to drill the hole
- Carbide tips withstands impact and high heat applications, dramatically extending life versus standard rebar cutters
- Unique brazing and hardening process extends life of carbide tips and increases productivity.
- Optimized flute design removes dust faster, keeping the carbide tips cooler for ultimate strength and durability
- Maximum performance in corded and cordless SDS-Plus rotary hammers (rotary mode only)
Cuts
- Concrete with Rebar
- Rebar
Applications
- Rebar
Specifications
| Diameter | 3/4" |
| Length | 12" |
| Pack Quantity | 1 |
| Shank | SDS Plus |
| Working Length | 5" |
Diablo's revolutionary, most complete range of SDS-Plus and SDS-Max Rebar Demon™ 4-cutter full-carbide head hammer drill bits are the only bits designed to be the most durable, fastest and coolest solutions on the market. The Rebar Demon bits feature up to 2X more Dura-Carbide to withstand up to 1800°F of intense heat whereas standard bits fail at 800°F. Diablo's impact resistant 4-cutter full-carbide head withstands the stress of high-powered hammer drills and the impact of rebar by taking small bites of rebar to deliver controlled carbide wear, reduced vibration and up to 7X longer life. Produced with Tri-Metal Fusion Welding, the full-carbide head resists heat and prevents breakage in extreme impact situations. Precision Tip delivers the stability and accuracy required to produce fast, precise holes in reinforced concrete for anchor setting.
Features
- Up to 7X longer life versus standard 2-cutter hammer drill bits
- Diablo made Dura-Carbide™ features up to 2X more carbide that withstands up to 1800°F of intense heat to combat rebar hits versus standard bits that fail at 800°F
- Impact Resistant 4-Cutter Full Carbide Head extracts smaller bites of rebar for controlled, consistent carbide wear and reduced vibration to deliver fast, precise holes
- Tri-Metal Fusion Welding features up to 3X stronger weld to keep the full carbide head intact during extreme impact such as rebar
- Precision Tip delivers stability and accuracy required for fast, precise holes
- Optimized flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability
- Wear mark indicator ensures precise hole making
- Optimized for maximum performance in corded and cordless SDS Plus or SDS Max rotary hammers
Cuts
- Reinforced Concrete
- Concrete
- Rebar
- Brick/Block
Applications
- Reinforced concrete and concrete
Specifications
| Diameter | 11/16" |
| Length | 21" |
| Number of Cutters | 4 |
| Pack Quantity | 1 |
| Shank | SDS Max |
| Head Type | Full Carbide Head |
| Working Length | 16" |
Features
- Cuts embedded rebar up to 1-1/2"
- Rebar cutters are not for enlarging holes
- The size of the rebar cutter must match the size of the drill bit used to drill the hole
- Carbide tips withstands impact and high heat applications, dramatically extending life versus standard rebar cutters
- Unique brazing and hardening process extends life of carbide tips and increases productivity.
- Optimized flute design removes dust faster, keeping the carbide tips cooler for ultimate strength and durability
- Maximum performance in corded and cordless SDS-Plus rotary hammers (rotary mode only)
Applications
- Rebar
Cuts
- Concrete with Rebar
- Rebar
Specifications
| Diameter | 5/8" |
| Length | 12" |
| Pack Quantity | 1 |
| Shank | SDS Plus |
| Working Length | 5" |
Features
- Cuts embedded rebar up to 1-1/2"
- Rebar cutters are not for enlarging holes
- The size of the rebar cutter must match the size of the drill bit used to drill the hole
- Carbide tips withstands impact and high heat applications, dramatically extending life versus standard rebar cutters
- Unique brazing and hardening process extends life of carbide tips and increases productivity.
- Optimized flute design removes dust faster, keeping the carbide tips cooler for ultimate strength and durability
- Maximum performance in corded and cordless SDS-Plus rotary hammers (rotary mode only)
Cuts
- Concrete with Rebar
- Rebar
Applications
- Rebar
Specifications
| Diameter | 1" |
| Length | 12" |
| Pack Quantity | 1 |
| Shank | SDS Plus |
| Working Length | 5" |
Features
- Cuts embedded rebar up to 1-1/2"
- Rebar cutters are not for enlarging holes
- The size of the rebar cutter must match the size of the drill bit used to drill the hole
- Carbide tips withstands impact and high heat applications, dramatically extending life versus standard rebar cutters
- Unique brazing and hardening process extends life of carbide tips and increases productivity.
- Optimized flute design removes dust faster, keeping the carbide tips cooler for ultimate strength and durability
- Maximum performance in corded and cordless SDS-Plus rotary hammers (rotary mode only)
Cuts
- Concrete with Rebar
- Rebar
Applications
- Rebar
Specifications
| Diameter | 7/8" |
| Length | 12" |
| Pack Quantity | 1 |
| Shank | SDS Plus |
| Working Length | 5" |
Features
- Cuts embedded rebar up to 1-1/2"
- Rebar cutters are not for enlarging holes
- The size of the rebar cutter must match the size of the drill bit used to drill the hole
- Carbide tips withstands impact and high heat applications, dramatically extending life versus standard rebar cutters
- Unique brazing and hardening process extends life of carbide tips and increases productivity.
- Optimized flute design removes dust faster, keeping the carbide tips cooler for ultimate strength and durability
- Maximum performance in corded and cordless SDS-Plus rotary hammers (rotary mode only)
Cuts
- Concrete with Rebar
- Rebar
Applications
- Rebar
Specifications
| Diameter | 3/8" |
| Length | 12" |
| Pack Quantity | 1 |
| Shank | SDS Plus |
| Working Length | 5" |
Features
- 1. 2 Cutter carbide tip maximizes carbide surface contact for longer bit life. 2 Cutter carbide tip maximizes carbide surface contact for longer bit life. Three flats on shank eliminate bit slipping in chuck Four flute design cleans debris out for fast, efficient drilling 2 Cutter carbide tip maximizes carbide surface contact for longer bit life.
Specifications
| Length | 8.5 in |
| Width | 1.875 in |
| Height | 0.75 in |
| Weight | 0.426 lbs |
| Power Source | NON-ENERGY USING |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Bit Type | Percussion |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Self Feeding | No |
| Shank Diameter | 1/2 in |
| Shank Length | 2 In |
| Shank Type | 3-Flat |
| Product Primary Material | Carbide |
Features
- 2 Cutter carbide tip maximizes carbide surface contact for longer bit life.
- Three flats on shank eliminate bit slipping in chuck
- Four flute design cleans debris out for fast, efficient drilling
Specifications
| Length | 8.21 in |
| Width | 1.87 in |
| Height | 0.64 in |
| Weight | 0.31 lbs |
| Power Source | NON-ENERGY USING |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Features
- 2 Cutter carbide tip maximizes carbide surface contact for longer bit life.
- Three flats on shank eliminate bit slipping in chuck
- Four flute design cleans debris out for fast, efficient drilling
Specifications
| Length | 14.25 in |
| Width | 1.875 in |
| Height | 0.5 in |
| Weight | 0.23 lbs |
| Power Source | NON-ENERGY USING |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Features
- 1. 2 Cutter carbide tip maximizes carbide surface contact for longer bit life. 2 Cutter carbide tip maximizes carbide surface contact for longer bit life. Three flats on shank eliminate bit slipping in chuck Four flute design cleans debris out for fast, efficient drilling 2 Cutter carbide tip maximizes carbide surface contact for longer bit life.
Specifications
| Length | 8.5 in |
| Width | 1.87 in |
| Height | 0.5 in |
| Weight | 0.23 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | No |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Features
- Rock carbide tip maximizes carbide surface contact for longer bit life
Specifications
| Length | 14.25 in |
| Width | 1.875 in |
| Height | 0.38 in |
| Weight | 0.27 lbs |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Features
- 2 Cutter carbide tip maximizes carbide surface contact for longer bit life.
- Four flute design cleans debris out for fast, efficient drilling
- Three flats on shank eliminate bit slipping in chuck (except DW5232, DW5233, DW5237, DW5238)
- For use with electric or cordless hammerdrills
Specifications
| Length | 8.5 in |
| Width | 1.875 in |
| Height | 0.4 in |
| Weight | 0.14 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | No |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Features
- Cuts embedded rebar up to 1-1/2"
- Rebar cutters are not for enlarging holes
- The size of the rebar cutter must match the size of the drill bit used to drill the hole
- Carbide tips withstands impact and high heat applications, dramatically extending life versus standard rebar cutters
- Unique brazing and hardening process extends life of carbide tips and increases productivity.
- Optimized flute design removes dust faster, keeping the carbide tips cooler for ultimate strength and durability
- Maximum performance in corded and cordless SDS-Plus rotary hammers (rotary mode only)
Cuts
- Concrete with Rebar
- Rebar
Applications
- Rebar
Specifications
| Diameter | 9/16" |
| Length | 12" |
| Pack Quantity | 1 |
| Shank | SDS Plus |
| Working Length | 5" |
Features
- 2 Cutter carbide tip maximizes carbide surface contact for longer bit life.
Specifications
| Length | 14.25 in |
| Width | 1.875 in |
| Height | 0.25 in |
| Weight | 0.13 lbs |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Features
- 1. 2 Cutter carbide tip maximizes carbide surface contact for longer bit life. 2 Cutter carbide tip maximizes carbide surface contact for longer bit life. Three flats on shank eliminate bit slipping in chuck Four flute design cleans debris out for fast, efficient drilling 2 Cutter carbide tip maximizes carbide surface contact for longer bit life.
Specifications
| Length | 8.5 in |
| Width | 1.8 in |
| Height | 0.3 in |
| Weight | 0.078 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | No |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
