Cordless Nail Guns

The DFD270 .27 Caliber Fully-Automatic Powder-Actuated Tool is designed for structural use in commercial steel and concrete applications. The nailer drives both 8mm and .300"head fasteners and clips in lengths of 1/2" 2-7/8, as well as 1/4"threaded studs. It is powered by a standard .27 caliber (short) safety strip load. A power dial allows for adjustment within .27 caliber load colors. Tool-free disassembly allows for easy cleaning and maintenance.. . The DFD270 tool features automatic piston return and load indexing between fastenings, making it ideal for high-capacity commercial applications. With the addition of the DFD2703 Accessory Magazine, the tool can also fasten collated pins.. . Kit includes tool, Magazine nose piece, Single Shot nose piece, cleaning kit, spall guard, and kit box.

The MILWAUKEE® M18 FUEL™ 16 Gauge Angled Finish Nailer provides peak productivity on the jobsite, delivering unmatched nailing performance without the hassle of a compressor and hose. Leveraging a nitrogen air spring mechanism, this cordless 16 gauge finish nailer consistently sinks nails to the required depth in hard and softwoods while leaving clean nail holes, making for repeatable results and easy filling. The nitrogen air spring mechanism, combined with Milwaukee POWERSTATE™ Brushless Motor and REDLINK PLUS™ Intelligence, delivers a pneumatic-like nailing response with zero ramp-up time from nail to nail for productive and efficient jobs. This Milwaukee cordless finish nailer features a compact and ergonomic design providing access into tight spaces where nailing is required while limiting fatigue when using the tool. When paired with an M18™ REDLITHIUM™ CP2.0 battery pack, this finish nail gun fires up to 800 nails per charge and is fully compatible with all M18™ REDLITHIUM batteries. The M18 FUEL™ 16 Gauge Angled Finish Nailer delivers the pneumatic performance that professional carpenters and remodelers demand with finishing nails for trim, crown molding, baseboards, and more in tight spaces with the freedom and convenience of cordless.

The DEWALT DCN650 15 Gauge Angled Finish Nailer drives 15 Gauge angled finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, baseboards, and hardwood floor installation. With its brushless motor powered by a DEWALT 20V MAX Lithium-Ion battery the DCN650 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. Battery & Charger Sold Separately

Every jobsite needs this DEWALT powder actuated tool, especially when it comes to fastening material to block, concrete or steel. It easily fastens up to 3-in drive pins and has a semi-automatic trigger that can fire 10 shot strip loads, offering greater speed. The adjustable load strength offers optimum penetration into all your applications for the results you want. With its metal housing and cushioned grip, you have a durable tool that allows you to complete any task comfortably and with ease.

The DEWALT DCN660 16 Gauge Angled Finish Nailer drives 16 Gauge angled finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, and baseboards. With its brushless motor powered by a DEWALT 20V MAX Lithium-Ion battery the DCN660 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. Battery & Charger Sold Separately

This 20V MAX 15° Cordless Coil Roofing Nailer delivers cordless convenience ideal for service repairs and small jobs. There are absolutely no hoses, compressors, or gas cartridges required. It's 100% battery-powered so the pro can show up and get to work right away. The 20V MAX 15° Coil Roofing Nailer can drive the full range of roofing fasteners from 3/4 in. to 1-3/4 in. Get the job done quickly and efficiently with bump actuation mode and tool-free depth adjustment that provides precise nail placement. Battery & Charger Sold Separately

The DEWALT DCN662 20V MAX XR 16 GA Cordless Straight Finish Nailer drives 16 Gauge straight finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening baseboards, door/window casing, and crown molding. With its brushless motor powered by a DEWALT 20V MAX Lithium-Ion battery the DCN662 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. Battery & Charger Sold Separately

The DEWALT DCN680 18 Gauge Brad Nailer drives 18 Gauge brad nails from 5/8 in to 2-1/8 in which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DEWALT 20V MAX Lithium-Ion battery the DCN680 is ready to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. Battery & Charger Sold Separately