Sockets, Ratchets and Sets
Item#:
MT6498836
Manufacturer Item:
MT6498836
Your Price:
2.99
Each
Item#:
MT6484208
Manufacturer Item:
MT6484208
Your Price:
1.99
Each
Item#:
MT6490312
Manufacturer Item:
MT6490312
Your Price:
1.99
Each
Features
- The SHOCKWAVE™ lineman's J hook socket is engineered to be the easiest way to remove J hooks from wooden utility poles
- The quick insert slot geometry allows for the easiest set up on the hardware
- Hardware hook reduces hardware drops
- Rounded edges for safer hardware removal
- Designed for use with J hook style service hooks
- Can be used to install with a pre-drilled hole
- 7/16 in. to 1/2 in. lineman's impact socket adapter included
- 1/2 in. square drive
- Features a pin detent hole for locking onto pin detent tools and adapters
Specifications
| Color / Finish | Black |
| Color Coded | No |
| Deep Well | Yes |
| Drive Size | 1/2 in |
| Etched / Stamped Size Identification | Yes |
| Impact or Standard | Impact |
| Length | 3.02 Inches |
| Internal Depth | 2.5 in |
| Material | Chromoly Steel |
| Unit of Measurement | Inch |
| Socket Points | Not Applicable |
| Size | 7/16 in |
| Set / Individual | Individual |
| ASTM F1505-01 Compliant | No |
| IEC 60900 Compliant | No |
| NFPA 70E Compliant | No |
Item#:
49-66-5132
Manufacturer Item:
49-66-5132
Your Price:
59.99
Each
Features
- Single-ended impact socket with hands-free adjustment between socket sizes
- Two coaxial spring-loaded 3/4-Inch and 9/16-Inch hex socket sizes in one tool
- Deep socket with a 1/2-Inch drive works great for pole hardware installation and removal
- High-torque, 12-point design is easier to position and works with square fasteners
- Cross hole design to prevent unintentional separation of adapter and socket
- Engineered for use with impact drivers
- Great for pole hardware installation and removal
- Hands-free Adjustment
- Engineered for use with impact drivers including Klein's 1/2-Inch Compact Impact Wrench (BAT20-CW/BAT20-CW1)
- Engineered for use with impact drivers including Klein's 1/2-Inch Compact Impact Wrench (Cat Nos. BAT20-CW, BAT20-CW1)
Specifications
| Style Name | 12-Point |
| Overall Height | 3.12" (7.9 cm) |
| Overall Length | 1.1" (2.8 cm) |
| Number of Points | 12 |
| Application | Pole Hardware Installation and Removal |
| Socket Size | 3/4" x 9/16" |
| Type | Impact Rated |
| Drive Size | 1/2" |
| Overall Width | 1.1" (2.8 cm) |
| Material | 4140 Steel |
| Height | 3.1200 in |
| Width | 1.1000 in |
| Depth | 1.1000 in |
| Weight | 0.5000 lbs |
Your Price:
39.99
Each
Item#:
MT6491146
Manufacturer Item:
MT6491146
Your Price:
5.69
Each
Features
- Use extensions to gain access to fasteners in locations that would otherwise be difficult to reach Male square is oriented in-line with female squares for use with fixed head torque wrenches Full chamfer at drive opening (when applicable) for easy engagement with drive tools Drive end chamfer and four detents help provide quick positive engagement with drive tool on any of the socket drive walls Size stamped on tool for easy identification Side locking hole
Specifications
| Length | 9.94 in |
| Width | 0.88 in |
| Height | 0.88 in |
| Weight | 0.91 lbs |
| Power Source | NON-ENERGY USING |
| Color Coded | No |
| Etched Or Stamped | Yes |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Item#:
J7183-00
Manufacturer Item:
J7183-00
Your Price:
23.29
Each
The DEWALT DWMT75423OSP 1/4-inch and 3/8-inch drive Torx socket set features DEWALT directtorque technology which helps to prevent rounding of fasteners and to provide better grip. The set includes a variety of sockets for your convenience - with this 10 pc combination socket set, you can be sure you have the right tool for the job. It has polished chrome vanadium finish, a knurled control ring, with hand stamped markings which make each piece easy to identify. Backed by DEWALT limited lifetime warranty. Set includes: 1/4 in drive Torx bit sockets: T15, T20, T25, T27, T30, T40, T45.
Features
- DirectTorqueTechnology
Specifications
| Length | 10.8 in |
| Width | 4.8 in |
| Height | 1.4 in |
| Weight | 0.597 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | No |
| Color Coded | No |
| Etched Or Stamped | Yes |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Unit Of Measure | Torx |
Item#:
DWMT75423OSP
Manufacturer Item:
DWMT75423OSP
Your Price:
15.25
Each
Features
- 3-in-1 impact socket features three square socket sizes: 3/4-Inch, 1-Inch and 1-1/8-Inch
- 7/16-Inch hex quick-change adapter included
- Fine tuned ball tip provides improved retention, minimizing drops
- 13/16-Inch diameter, 6-Inch (152 mm) long hollow shaft allows use on long threaded bolts
- Features three square socket sizes: 3/4-Inch, 1-Inch and 1-1/8-Inch
- Alignment slot to tighten and loosen most pole hardware
- 13/16-Inch diameter, 6-Inch (15 cm) long hollow shaft allows use on long threaded bolts
- Engineered for use with impact drivers
- Color coded with double lines to identify size and slotted feature
- Replacement adapter is available (Cat. No. NRHDA)
- Large and Small Slots; Easily Switch Between Sizes Without Removing Your Gloves
- 5-in-1 Impact Socket features three square socket sizes: 3/4-Inch, 1-Inch and 1-1/8-Inch, and small and large alignment slots
- 13/16-Inch diameter, 6-Inch (15.2 cm) long hollow shaft allows use on long threaded bolts
Specifications
| Style Name | 3-in-1 |
| Overall Width | 1.75" (4.5 cm) |
| Overall Height | 1.75" (4.5 cm) |
| Overall Length | 7.75" (19.7 cm) |
| Socket Size | 3/4", 1", 1-1/8" |
| Number of Points | 4 |
| Material | Steel |
| Drive Size | 7/16" Hex |
| Type | Impact Socket |
| Application | Distribution - 3/4", 1", 1-1/8" |
| Standard | ASME B107.2 |
| Height | 2.0000 in |
| Width | 3.0000 in |
| Depth | 7.7500 in |
| Weight | 2.0000 lbs |
Your Price:
194.89
Each
Item#:
MT6493662
Manufacturer Item:
MT6493662
Your Price:
3.29
Each
Features
- Use adapters to help increase or decrease drive end size.
- Do not use hand adapters with power tools.
- Do not over torque small sockets when using them with adapters on large drive tools.
- Made of forged steel.
Specifications
| Length | 3 in |
| Width | 2 in |
| Height | 2 in |
| Weight | 1.42 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Warranty | LLW |
| Color Coded | No |
| Etched Or Stamped | Yes |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Item#:
J07656
Manufacturer Item:
J07656
Your Price:
42.29
Each
Features
- Single-ended impact socket with hands free adjustment between socket sizes
- Two coaxial spring-loaded sockets in one tool
- Includes 3/4-Inch, 13/16-Inch, 1-Inch and 1-1/8-Inch square socket sizes plus a 7/16-Inch hex quick-change adapter
- Works on 1/2-Inch, 5/8-Inch and 3/4-Inch pole hardware
- 13/16-Inch diameter, 6-Inch (152 mm) long hollow shaft allows use on long threaded bolts
- Cross hole design to prevent unintentional separation of adapter and socket
- Replacement adapter is available (NRHDA4)
- Engineered for use with impact drivers
- Hands-free Adjustment
- 13/16-Inch diameter, 6-Inch (15 cm) long hollow shaft allows use on long threaded bolts
- Replacement adapter is available (Cat. No. NRHDA4)
- Color coded with double lines to identify size and slotted feature
- 6-in-1 single-ended impact socket with hands free adjustment between socket sizes
- Alignment slot to tighten and loosen most pole hardware
- Large and Small Slots; Hands-free Adjustment
Specifications
| Style Name | 4-in-1 Square |
| Number of Points | 4 |
| Application | Pole Hardware Installation and Removal |
| Socket Size | 3/4", 13/16", 1", 1-1/8" Square |
| Material | Steel |
| Standard | ASME B107.2 |
| Type | Impact Socket |
| Overall Length | 7" (17.8 cm) |
| Overall Height | 2" (5.1 cm) |
| Drive Size | 7/16" Hex, 1/2" Square |
| Overall Width | 2" (5.1 cm) |
| Height | 2.0000 in |
| Width | 2.0000 in |
| Depth | 9.1000 in |
| Weight | 2.2600 lbs |
Your Price:
239.99
Each