Personal Protection
The Radians SV83 is a short sleeved standard Type R Class 3 safety vest for enhanced night time visibility. Basic pockets and zip front closure for increased functionality.Class 3 safety vests are designed to protect the worker with maximum visibility. These vests are designed with the most hi-vis material coverage and reflective stripes for workers exposed to complex work environments. Class 3 vests are required in environments with high-speed traffic, high-risk environments and where the worker must be visible through a full range of motions at a minimum of 1280 feet (390 meters).
Features
- Closure: Zipper.
- 2" Silver Tape Reflective Material.
- 2 horizontal Stripes for enhance night visibility.
- Pockets: 2 Each Upper Outside, 2 Each Lower Inside, 2 Each Upper Inside.
- Materials: 100% Polyester Solid Knit, 100% Polyester Mesh.
Specifications
| Garment Silhouette | Vest |
| Garment ANSI 107 Use Type and Class | Type R Class 3 |
| Garment Sleeve Type | Sleeveless |
| Garment Fabric Type | Mesh |
| Garment Closure Type | Zipper |
| Height | 1.2 in |
| Length | 10.2 in |
| Weight | 0.5938 in |
| Width | 8.6 in |
| Depth | 10.2 in |
The Radians SV83 is a short sleeved standard Type R Class 3 safety vest for enhanced night time visibility. Basic pockets and zip front closure for increased functionality.Class 3 safety vests are designed to protect the worker with maximum visibility. These vests are designed with the most hi-vis material coverage and reflective stripes for workers exposed to complex work environments. Class 3 vests are required in environments with high-speed traffic, high-risk environments and where the worker must be visible through a full range of motions at a minimum of 1280 feet (390 meters).
Features
- Closure: Zipper.
- 2" Silver Tape Reflective Material.
- 2 horizontal Stripes for enhance night visibility.
- Pockets: 2 Each Upper Outside, 2 Each Lower Inside, 2 Each Upper Inside.
- Materials: 100% Polyester Solid Knit, 100% Polyester Mesh.
Specifications
| Garment Silhouette | Vest |
| Garment ANSI 107 Use Type and Class | Type R Class 3 |
| Garment Sleeve Type | Sleeveless |
| Garment Fabric Type | Mesh |
| Garment Closure Type | Zipper |
| Height | 1.2 in |
| Length | 11.8 in |
| Weight | 0.575 in |
| Width | 8.6 in |
| Depth | 11.8 in |
Features
- 18 gauge green High Performance Polyethylene (HPPE) provides cut resistance.
- Black sandy foam nitrile palm coating provides protection from abrasion in wet or dry conditions.
- Seamless cuff design provides a comfortable fit.
- Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture ( 4 3 4 1).
- ANSI Cut Level A2, EN388 Cut Level 3.
Specifications
| Glove Type | Cut Level Glove |
| Glove Coating | Micro Foam Nitrile |
| Glove Standards | EN388: 4 3 4 1, ANSI Cut Level A2, ANSI Abrasion Level 3, ANSI Puncture Level 2 |
| Glove Palm | Micro Foam Nitrile Dipped |
| Glove Cuff Type | Knit Wrist |
| Height | 0.5 in |
| Length | 10 in |
| Weight | 0.0937 in |
| Width | 5.5 in |
| Depth | 10 in |
Features
- Full Brim
- 4 Point Ratchet Suspension
- Pillowed Brow Pad
- Nylon Crown Strap Suspensions
- Vertical Height Adjustment
- Quick Ratchet Adjustment System
- High Density Polyethylene Construction
- Meets ANSI Z89.1 Type 1 Class G & E Standards and CSA Z94.1-15
- Made in the USA
- Nape Cushion on Ratchet Suspension
Specifications
| Hard Hat Type | Type I |
| Hard Hat Suspension Type | Ratchet |
| Hard Hat Class | E, G |
| Hard Hat ANSI Standard | ANSI Z89.1 Type 1 Class G & E |
| Hard Hat Material | High Density Polyethylene |
| Height | 6 in |
| Length | 12.5 in |
| Weight | 0.9187 in |
| Width | 10.5 in |
| Depth | 12.5 in |
Features
- AR/FR 7 oz. 100% Cotton Coverall
- ATPV 8.5 Cal/cm²
- ASTM F1506 and NFPA 2112
- NFPA 70E PPE CAT 2
- UL Certified
- 2 Patch Breast Pockets with Left Pocket Pen Slot
- 2 Waist Pockets with Internal Pass-Through To Inner Pants Pockets
- 2 Back Hip Pockets
- Comfortable Pleated Back with Elasticized Waistband
- Adjustable Snaps on Leg Hem and Sleeves
Specifications
| Garment Silhouette | Coverall |
| Garment Fabric Type | Twill |
| Garment Closure Type | Heavy Duty Zipper with Internal Snap Placket |
| Garment Total Number of Pockets | 6 |
| Garment Standards | ASTM F1506, NFPA 2112, NFPA 70E, UL Certified |
| Height | 1.75 in |
| Length | 16 in |
| Weight | 2.5 in |
| Width | 11 in |
| Depth | 16 in |
Features
- Made from tightly woven cotton fibers for enhanced durability.
- High-visibility red and black "DANGER" print to ensure clear warning visibility.
- Dimensions of 3 inches by 200 feet to cover extensive areas.
- Lightweight for easy application and management.
Specifications
| Product Type | Barricade Tape |
| Size | 3 in x 200 ft |
| Material | Cotton Fiber |
| Color | Red/Black |
| Legend | DANGER |
Features
- Made in the USA
- Easy-on, easy-off, weaves through the temple
- No parts or tools required
- No metal parts
- Blocks 100% of UV rays
- Molded of soft, bendable vinyl .075
- Absorbs the energy of impact
- Allows temples to fold correctly
- Conforms to ANSI/ISEA Z87.1 standards
- 60 pair per box
Specifications
| Eyewear Accessory Color | Clear |
| Height | 1 in |
| Length | 2.75 in |
| Weight | 0.021 in |
| Width | 1.5 in |
| Depth | 2.75 in |
Features
- 13-gauge Trosar by DSM™ shell made with USA manufactured fibers
- Polyurethane palm dip provides protection from abrasion in wet or dry conditions
- Seamless design provides a comfortable fit.
- Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture ( 4 X 4 2 B)
- ANSI rated cut level A2, Abrasion 6, Puncture 3
Specifications
| Glove Type | Cut Level Glove |
| Glove Coating | PU |
| Glove Standards | EN388: 4 X 4 2 B, ANSI Cut Level A2, ANSI Abrasion Level 6, ANSI Puncture Level 3 |
| Glove Palm | Polyurathane |
| Glove Cuff Type | Seamless |
| Height | 0.4 in |
| Length | 10 in |
| Weight | 0.14 in |
| Width | 5 in |
| Depth | 10 in |