Tools
The M18™ 2 Gallon wet/dry vacuum provides users with a powerful and portable wet/dry clean-up tool. A high performance motor creates powerful suction for both wet and dry applications. Its stackable design and organized on-board storage keeps all of the attachments inside the unit for convenient transport and storage. The 0880-20 comes with a flexible hose, crevice tool, utility nozzle, and a certified HEPA filter. With 30+ minutes of run time on a M18™ REDLITHIUM™ HIGH DEMAND™ 9.0 battery pack, its ideal for extended spot and area clean up.
Features
- 2 Gallon Capacity
- 30+ minutes of Clean-up on an M18™ REDLITHIUM™ HIGH DEMAND™ 9.0 Battery Pack
- 32" of Water Lift
- 45 CFM
- Attachments Included: 6 Foot Flexbile Hose, Crevice Tool, Utility Nozzle, and HEPA Filter
- Built-in Blower Port
- HEPA Filter Included
- Hose Diameter: 1-1/4"
- Organized On-board Storage: Hose, Utility Nozzle, Crevice Tool
- Powerful Suction for Wet & Dry Applications
- Stackable Tool Box Design
Specifications
| Air Flow (cfm) | 45 |
| Air Volume (cfm) | 45 |
| Automatic Shut-Off | No |
| Badge Branding | Not Applicable |
| Battery System | M18™ |
| Brushless Motor | No |
| Built-In Drain | No |
| Color Finish | Black;Red |
| Depth | 18.5 Inches |
| Filter Type | HEPA |
| FUEL | No |
| Material | Plastic |
| Motor Type | Brushed |
| ONE-KEY Enabled | No |
| PACKOUT Compatible | No |
| Peak Amps (A) | 3 |
| Power Source | Cordless |
| Power Tool Branding | Brushed |
| Tank Capacity (gal) | 2 |
| Vacuum Style | Compact |
| Vacuum Type | Wet/Dry |
| Voltage | 18 |
Features
- Triple ground teeth cut on the push and pull strokes for fast, efficient cutting
- Induction hardened blade for long-lasting sharpness
- Ergonomic bi-material grip for a comfortable slip resistant hold
- Contoured slip-resistant index finger grip for cut alignment
- 8TPI/9PPI
Includes
- (1) Panel Saw
Specifications
| Height | 1.400 in |
| Length | 19.400 in |
| Width | 5.800 in |
| Weight | 0.803 lbs |
| Product Type | HANDSAW |
| Product Material Group | WOOD |
| Net Lit-Ion Y/N | No |
| Warranty | LLW |
| Blade Length | 15 In |
| Blade Stroke Length | 15 In |
| Blade Width | 0.003 |
| Handle Material | Composite |
| Teeth Per Inch | 8 |
The MILWAUKEE® M18™ Brushless Threaded Rod Cutter is a dedicated cutting solution for the most common threaded rod sizes. This includes coarse 1/4", 3/8" and 1/2" mild steel and 1/4" and 3/8" stainless steel threaded rod. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18™ REDLITHIUM™ 2.0Ah Battery. The four-sided cutting dies cut all sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts allowing nuts to be threaded on by hand. The rod cutter has optimized blade geometry and cut speed to prevent chips and sparks. The tool has auto jaw opening for fast, repetitive cuts while a reverse button helps prevent unintended cuts. The tool's centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides a stable surface for benchtop cuts.
Features
- 1-1/2" Trim Length Delivers Even, Uniform Cuts Every Time
- Auto Jaw Opening for Fast, Repetitive Cuts
- Brushless Motor provides more power, more run-time, and longer life
- Centered Grip Optimized for One-Handed Overhead Operation
- Clearest Line of Sight While Making Overhead Cuts
- Cuts 1/4", 3/8" & 1/2" Mild Steel, 1/4" & 3/8" Stainless Steel, Coarse Threaded Rod
- Delivers 400+ Cuts on 3/8" Mild Steel Per Charge with a M18™ 2.0Ah Battery
- Delivers Clean, Burr-Free Cuts for Threading Nuts on by Hand
- Easy Die Changes Using Allen Key Stored On Tool
- Flat Horizontal Position for Benchtop Use
- Four Sided Rotatable Cutting Dies Allow You to Cut Three Different Sizes of Threaded Rod with the Same Tool
- Improved Cutting, No Chips or Sparks
- LED Light Illuminates Cut Area
- Powers through 1/2" Mild Steel & 3/8" Stainless Steel Threaded Rod in Seconds
- Reverse Button for Unintended Cuts
Specifications
| Battery Charger Input Voltage | 120 |
| Battery System | M18™ |
| Color Finish | Black;Red |
| Depth | 10 Inches |
| FUEL | No |
| Material | Reinforced Nylon |
| Motor Type | Brushless |
| Number of Batteries Required | 1 |
| ONE-KEY Enabled | No |
| Power Source | Cordless |
| Power Tool Branding | Brushless (Not FUEL™) |
| Voltage | 18 |
| Weight - Battery Installed (lb) | 8.7 |
| Weight Excluding Battery (lb) | 7.7 |
The MILWAUKEE® M12 FUEL™ 1/4" Hex Impact Driver is the Fastest Subcompact Impact Driver, the Most Compact, and provides Maximum Workspace Visibility. The POWERSTATE™ Brushless motor delivers the fastest driving speeds in the subcompact class for unmatched productivity. At only 5" long and 7.6" tall (with M12 CP 2.0 Ah battery), this solution is the most overall compact impact driver in class, allowing greater access in tight spaces and overall portability. Tri-LEDs surround the bit accessory with brighter lights and less shadows providing maximum workspace visibility. MILWAUKEE® REDLINK PLUS™ Intelligence delivers top of the line thermal performance allowing more work to be completed. Get all day runtime when paired with the MILWAUKEE® M12 REDLITHIUM™ battery pack. The M12 FUEL™ Impact Driver is part of MILWAUKEE® M12™ System which is fully compatible with over 125 solutions.
Features
- POWERSTATE™ Brushless Motor delivers up to 1,500 in-lbs. of torque
- Only 5" in length for most access in tight spaces
- Tri-LED illuminates workspace
- Up to 3600 RPMs in Mode 3
- 4-Mode Drive Control with dedicated self tapping screw mode
- Light Weight at 2 lbs for tool belt portability and less fatigue in the work day
- Single Handed Bit Insertion for Ease of Use
- REDLINK PLUS intelligence provides the ability to drive more fasteners back to back
- All-metal belt clip for portability
- Compatible with Milwaukee Accessory Bit Holder 49-16-3697
- Compatible with all M12™ batteries & chargers
- Part of the M12 System, featuring over 125+ Tools
- Fastest Subcompact Impact Driver
- Most Compact
- Maximum Workspace Visibility
Specifications
| Badge Branding | FUEL™ |
| Battery System | M12™ |
| Chuck Size | 1/4 in |
| Chuck Type | Hex Quick Change |
| Color Finish | Black;Red |
| Depth | 5 Inches |
| DRIVE CONTROL | 4-Mode |
| FUEL | Yes |
| Handle Type | Pistol Grip |
| Impacts Per Minute Range (IPM) | 0 - 4,000 |
| Material | Metal |
| Maximum RPM | 3600 |
| Maximum Torque (in-lbs) | 1500 |
| Motor Type | POWERSTATE™ Brushless |
| Number of Batteries Required | 1 |
| ONE-KEY Enabled | No |
| Power Source | Cordless |
| Power Tool Branding | FUEL™ |
| Rotations Per Minute Range (RPM) | 0 - 3,600 |
| Surge | No |
| Voltage | 12 |
| Weight Excluding Battery (lb) | 1.6 |
| Switch Type | Trigger |
Features
- Easy-to-grip profile with reinforcing ribs
- Accurate measuring in all positions 2 measuring surfaces, suitable for reverse position measurements
- End caps with an slip-stopper for a firm grip when marking
Specifications
| Measurement accuracy in normal position | ±1/32in @ 72in |
| Measurement accuracy in reverse position | ±3/64in @ 72in |
| Reverse measurement | Yes |
| Number of vials | 2 pc. |
| Number of vertical vials | 1 pc. |
| Number of horizontal vials | 1 pc. |
| Number of measuring surfaces | 2 pc. |
| Measuring surface, coated | Yes |
| Profile | Rectangular profile with ribs |
| End caps | Standard, slip-stopper |
| Material | Aluminium |
| Manufacturer's guarantee | Lifetime accuracy guarantee |
| Length | 8,00 cm |
| Weight Incl. Sales Packaging | 187 grams |
Features
- Built for high-performance and versatility: engineered for heavy-duty general-purpose cutting
- Long cutting life with precision-honed edge for consistent reliability
- High compatibility: fits most standard utility knives
Includes
- (5) Blades
Specifications
| Height | 0.250 in |
| Length | 4.900 in |
| Width | 1.900 in |
| Weight | 0.008 lbs |
| Product Type | UTILITY KNIFE BLADE |
| Product Finish | Silver |
| Product Primary Material | Metal |
| Net Lit-Ion Y/N | No |
| Warranty | LLW |
| Blade Length | 2.4 In |
| Blade Tooth Spacing | No |
| Blade Type | Utility |
| Cuts Into | Multi-Purpose |
| Thickness | 0.024 In |
| Use With | Utility Knife |
Features
- Regular-duty utility blade for light sheet materials, paper, and cardboard
- Fits most standard utility knives
Specifications
| Length | 5.9 in |
| Width | 1.9 in |
| Height | 0.3 in |
| Weight | 0.03 lbs |
| Battery Test Summary | STANLEY_UN38.3 LITHIUM TEST SUMMARY_Rev_1,2.pdf |
| Net Lit-Ion Y/N | No |
| Warranty | NLW |
| Blade Length | 2.2 In |
| Blade Stroke Length | 2.2 In |
| Blade Tooth Spacing | No |
| Blade Type | Utility |
| Blade Width | 0.017 |
| Cuts Into | Multi-Purpose |
| Sharpenable | No |
| Thickness | 0.017 In |
| Use With | Cutting |
| Product Finish | Steel |