Tools
Features
- 360-Degree Handle For Multiple Orientation Use
- Powerful Brightness at 2,000 Lumen Output
- Natural Daylight Hue
- IP54 Rated - Water and Dust Ingress Protection
- Compact and lightweight at only 2.8 lbs. (tool only)
- Tripod Mountable- 5/8 in.-11 and 1/4 in.-20
Includes
- (1) DCL077 CompactTask Light. Battery and charger sold separately
Specifications
| Height | 8.000 in |
| Length | 10.100 in |
| Width | 5.188 in |
| Weight | 3.300 lbs |
| Product Type | WORK LIGHT |
| Product Finish | Yellow/Black |
| Product Primary Material | Plastic |
| Cordless Vs. Corded | Cordless |
| Voltage | 20 V V |
| Battery Included | No |
| Battery Type | 20V MAX Lithium Ion |
| Charger Included | No |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Warranty | 3LW1YS90D |
| Bare Tool | Yes |
| Number Of Light Bulbs | 1 |
| Variable Speed | No |
| Water Resistant | No |
| Work Light Type | Cordless Work Light |
With the introduction of the new M18™ cordless shears, Milwaukee® has the most innovative and largest cordless shear selection on the market. By redesigning the body, we provide an in-lbs wrist design that maximizes control during use. Also adding the industry's only tool-free 360° rotating head, our new shears can be used where hand snips have been needed to finish the cut. These innovations brought to each of the 3 new Milwaukee® cordless shears are changing the way tradesmen work on the jobsite today.
Features
- 360º Tool-Free rotating head
- Ergonomic body design
- Variable speed trigger
- Belt clip
Specifications
| Powered Tool Power Source | Electric - Cordless |
| Cordless / Corded | Cordless |
| Maximum Gauge Capacity | 20 |
| Maximum Strokes per Minute - No Load | 2300 |
| Minimum Cut Radius (In) | 6.000000 |
| Shear Usage | Metal |
| Net Tool Weight | 3.9 lbs |
| Case Included | No |
| Battery Composition | Lithium-Ion (Li-ion) |
| Battery Ampere-hour (Ah) | 4.0 |
| Battery Size | Battery Packs |
| Battery Voltage (V) | 18 |
| Charger Included | No |
| Color / Finish | Red with black |
| Variable Speed | Yes |
| Handle Material | Rubber |
| Housing Material | Metal and plastic |
| Lock-on Switch | No |
| Switch Type | Trigger |
| Recommended Safety Equipment | Safety Glasses and Gloves |
| CSA Certified | No |
| ETL Listed | No |
| UL Listed | Yes |
| Package Contents | (1) M18 Cordless 18 Gauge Double Cut Shear |
This 20V MAX cordless kit includes one brushless 3-speed oscillating multi-tool with a universal accessory adaptor and two wood cutting blades to help get your project started. The DCS356 oscillating multi-tool has a powerful brushless motor that provides up to 57% more runtime over a similar brushed tool. The 3-speed selector allows users to choose their speed setting based on application. The quick-change accessory system allows you to change blades quickly and easily, and with the universal accessory adaptor, it's compatible with most oscillating tool accessories. The DUAL-GRIP variable-speed trigger provides ultimate speed and application control. The bright LED illuminates dark workspaces. Battery, charger, and tool guide system sold separately.
Features
- The 3-speed selector allows users to choose their speed setting based on application
- Brushless motor delivers up to 57% more runtime over brushed
- Dual-Grip variable-speed trigger gives users ultimate speed and application control
- Universal accessory adapter for use with most oscillating tool accessory brands
- Quick-Change accessory system allows blades and attachments to be changed quickly without wrenches
- Bright LED illuminates dark work surfaces for accurate cutting
Includes
- (1) Wood with nail blade | (1) Fast-cut wood blade | (1) Universal accessory adaptor | (1) DCS356 20V Max* XR Brushless cordless oscillating multi-tool
Specifications
| Height | 3.063 in |
| Length | 12.000 in |
| Width | 4.500 in |
| Weight | 2.750 lbs |
| Product Type | OSCILLATING MULTI-TOOL |
| Product Finish | Black/Yellow |
| Product Primary Material | Plastic |
| Cordless Vs. Corded | Cordless |
| Motor Type | Brushless |
| Voltage | 20 V V |
| Battery Included | No |
| Battery Type | 20V MAX Lithium Ion |
| Charger Included | No |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Warranty | 3LW1YS90D |
| Bare Tool | Yes |
| Case Type | N/A (no case) |
| Compatibility | Universal accessory adapter |
| Housing Material | Plastic |
| Oscillations Per Minute | 20000 |
| Variable Speed | Yes |
Features
- 5" Cutting Capacity - Using a 44 7/8 in. Blade (1140 MM)
- DEWALT built brushless motor for performance and durability for blade speed of 490 sfpm
- Variable Speed - This bandsaw has a speed dial that allows for more versatility and control when making cuts
- Tool less blade changing lever loosens blade tension
- LED work light with 20 second delay illuminates dark work surfaces for accurate cutting
- Integrated hang hook allows user to hang the saw without damaging the front handle or base
Includes
- (1) DCS374 Band saw
Specifications
| Height | 9.200 in |
| Length | 22.300 in |
| Width | 14.400 in |
| Weight | 16.650 lbs |
| Product Type | FLARE NUT WRENCH |
| Cordless Vs. Corded | Cordless |
| Motor Type | Brushless |
| Voltage | 20 V V |
| Battery Included | No |
| Battery Type | 20V MAX Lithium Ion |
| Charger Included | No |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Warranty | 3LW1YS90D |
| Bare Tool | Yes |
| Blade Length | 44.875 In |
| Blade Qty | 1 |
| Case Type | No Case Included |
| Cuts Into | Metal |
| Cutting Width | 4.75 In |
| Engine | Brushless |
| Handle Type | D-Ring |
| Housing Material | Plastic |
| Integrated Work Light | Not Featured |
| Lock-On Switch | Yes |
| Maximum Feet Per Minute | 490.0 Ft |
| Minimum Blade Width | .020 In. |
| Saw Type | Horizontal |
| Thermal Overload Protection | No |
| Throat Depth | 5 In |
| Variable Speed | Yes |
Features
- One-handed and overhead cutting with the integrated guard
- Variable speed trigger and speed dial allow for easy speed adjustment to match the material being cut.
- Blade release lever with wrench and single point tracking adjustment; saw uses a 27 in. - 27 1/4 in. blade
- Metal latch secures the pivoting guard when opened for easy blade changes.
- Lanyard Capable compatible
- Tool Connect CHIP READY: Chip pocket accepts Tool Connect Chip DCE042 and connects with Tool Connect Site Manager app for easy asset management on the jobsite. (DCE042 sold separately)
Includes
- (1) DCS377 20V MAX* One-handed bandsaw | (1) 14/18TPI Blade | (1) Blade tracking wrench
Specifications
| Height | 6.600 in |
| Length | 13.189 in |
| Width | 9.567 in |
| Weight | 7.716 lbs |
| Product Type | PORTABLE BANDSAW |
| Product Finish | Yellow/Black |
| Product Material Group | METAL |
| Cordless Vs. Corded | Cordless |
| Motor Type | Brushless |
| Voltage | 20 V V |
| Battery Included | No |
| Battery Type | 20V MAX Lithium Ion |
| Charger Included | No |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Warranty | 3LW1YS90D |
| Bare Tool | Yes |
| Blade Length | 27.25 In |
| Blade Qty | 1 |
| Case Type | No Case Included |
| Cutting Width | 1.75 In |
| Engine | Brushless |
| Handle Type | D-Ring |
| Housing Material | Plastic |
| Integrated Work Light | Not Featured |
| Maximum Feet Per Minute | 380 Ft |
| Power Input | 1400 W |
| Thermal Overload Protection | Yes |
| Throat Depth | 1.75 In |
| Variable Speed | Yes |
Features
- Quick blade changes: no screwdriver required
- Flexible blade positioning: choose between 3 different positions with retractable blade slide
- Storage for up to 5 blades in swing-out compartment in handle
- Versatile utility: integrated string cutter can be used even when blade is retracted
Includes
- (3) 11-921 Heavy duty utility blades
Specifications
| Height | 0.800 in |
| Length | 8.500 in |
| Width | 3.000 in |
| Weight | 0.400 lbs |
| Product Type | UTILITY KNIFE |
| Product Finish | Gray |
| Product Material Group | METAL |
| Product Primary Material | Metal |
| Net Lit-Ion Y/N | No |
| Warranty | 1YW |
| Blade Length | 2.5 In |
| Blade Material | High Carbon Steel |
| Blade Qty | 3 |
| Blade Type | Utility |
| Blade Width | 0.625 |
| Compatibility | 11-921, 11-983, 11-961, 11-987, 11-941 |
| Handle Material | Steel |
| Handle Type | Steel |
| Lockable | Yes |
| Quick/Tool Less Changing | Yes |
| Retractable Blade | Yes |
The MILWAUKEE® M18 FUEL™ Compact Vacuum provides powerful performance and ultimate versatility to excel in small-area and spot clean-up applications on the jobsite. Armed with a POWERSTATE™ Brushless Motor and exclusive two-stage debris separation, the compact shop vac is optimized for dry jobsite debris. The two-stage debris separation divides small and large particles into the bagless canister prior to entering the filter. This delivers up to 50% more sustained suction versus the competition and more efficient clean-up. For maximum versatility, the portable vacuum's orientation and quick-change accessories can be manipulated from upright use at ground level, waist level, or for use overhead. It comes fully equipped with an extension wand, powered floor tool, floor tool, flexible hose, crevice tool, utility tool, brush tool, accessory holder, HEPA filter, and foam pre-filter.
Features
- POWERSTATE™ Brushless Motor + Two-Stage Dry Debris Separation optimized for dry jobsite debris
- 50% More Sustained Suction vs. Competition for more efficient clean-up
- Maximum Versatility: Five Dedicated Accessory Solutions
- REDLINK PLUS™ Intelligence: Ensures optimal performance and maintains compatibility across the entire M18™ System
- Removeable canister for easy emptying of debris on or off tool
- Quick-change accessories for upright use at ground level, waist level, or overhead
- On-board accessory holder provided for flexible hose, crevice tool, utility tool, and brush tool
- High / Low switch
- .25-gallon cannister capacity
- Certified washable HEPA Filter
- Compatible with all M18™ batteries
Specifications
| Amperage (A) | 18.0 |
| Voltage (V) | 18.0 |
| Height | 11.65 Inches |
| Width | 6.39 Inches |
| Weight | 4.35 Inches |
| Color / Finish | Red/Black |
| Housing Material | PC/ABS |
| Cordless / Corded | Cordless |
| Capacity (gal) | 1.0 |
| Wet / Dry | Yes |
| Hose Diameter | 1.75 in |
| Hose Length | 2.0 ft |
| Charger Included | No |
| Filtration Type | HEPA |
| Hand Held | Yes |
| Requires Bag | No |
| Vacuum Type | Handheld |
| CSA Certified | No |
| ETL Listed | No |
| UL Listed | Yes |
| Included Accessories | Extension Wand, Flexible Hose, Powered Floor Tool, Floor Tool, Crevice Tool, Brush Tool, Utility Tool, Accessory Holder HEPA Filter, Foam Pre-Filter |