Tools
Cuts
- Hardwoods
- Softwoods
- Plywood
Features
- SPEED-TIP™ self-feed design effortlessly pulls the bit with minimal effort and faster holes
- Optimized curved paddle design quickly removes chip build-up for more holes per charge
- Impact Strong™ increases shank stability and durability
- Angled spur cutting edge scores wood for clean holes and reduced blowout
- Maximum performance in cordless and corded impact and drill drivers
Applications
- Drilling clean wood
Specifications
| Diameter | 1-1/2" |
| Length | 6" |
| Pack Quantity | 2 |
| Shank | 1/4" Hex |
Features
- 3-in-1 40-Grit sanding plate for removal of grout, mortar and tile adhesive
- Carbide Grit Tip reaches hard to access areas and tight corners
- Maximum performance in cordless and corded Fein® and other Starlock tools
- Also compatible with non-Starlock multi-tools from AEG®, Bosch®, Festool®, Makita®, Metabo®, Milwaukee®, Ridgid® and Rockwell®
- Not compatible with Craftsman®, Dewalt®, Dremel®, Hart® or Porter-Cable®
Cuts
- Grout
- Mortar
- Tile Adhesive
Applications
- Grout and Mortar
Specifications
| Pack Quantity | 1 |
| Tooth Design | Carbide Grit |
| Grout Thickness | 1/8" |
| Interface | Starlock |
Diablo's revolutionary, most complete range of SDS-Plus and SDS-Max Rebar Demon™ 4-cutter full-carbide head hammer drill bits are the only bits designed to be the most durable, fastest and coolest solutions on the market. The Rebar Demon bits feature up to 2X more Dura-Carbide to withstand up to 1800°F of intense heat whereas standard bits fail at 800°F. Diablo's impact resistant 4-cutter full-carbide head withstands the stress of high-powered hammer drills and the impact of rebar by taking small bites of rebar to deliver controlled carbide wear, reduced vibration and up to 7X longer life. Produced with Tri-Metal Fusion Welding, the full-carbide head resists heat and prevents breakage in extreme impact situations. Precision Tip delivers the stability and accuracy required to produce fast, precise holes in reinforced concrete for anchor setting.
Features
- Up to 7X longer life versus standard 2-cutter hammer drill bits
- Diablo made Dura-Carbide™ features up to 2X more carbide that withstands up to 1800°F of intense heat to combat rebar hits versus standard bits that fail at 800°F
- Impact Resistant 4-Cutter Full Carbide Head extracts smaller bites of rebar for controlled, consistent carbide wear and reduced vibration to deliver fast, precise holes
- Tri-Metal Fusion Welding features up to 3X stronger weld to keep the full carbide head intact during extreme impact such as rebar
- Precision Tip delivers stability and accuracy required for fast, precise holes
- Optimized flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability
- Wear mark indicator ensures precise hole making
- Optimized for maximum performance in corded and cordless SDS Plus or SDS Max rotary hammers
Cuts
- Reinforced Concrete
- Concrete
- Rebar
- Brick/Block
Applications
- Reinforced concrete and concrete
Specifications
| Diameter | 3/16" |
| Length | 6" |
| Number of Cutters | 4 |
| Pack Quantity | 25 |
| Shank | SDS Plus |
| Head Type | Full Carbide Head |
| Working Length | 4" |
Features
- TiCo™ Hi-Density carbide specifically designed for each application to increase performance
- Perma-SHIELD® Non-stick Coating protects from heat, gumming, & corrosion
- Super thin laser cut kerf for fast, durable, and clean cuts
- Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
- Hardened Steel Body warrants a longer life and sharper cutting edge.
Cuts
- Hardwoods
- Softwoods
- Plywood
- Melamine
Applications
- Ripping
- Crosscutting Wood
Specifications
| Arbor | 1" |
| Diameter | 12" |
| Hook Angle | 15° |
| Kerf | .118" |
| Plate | .071" |
| Max RPM | 6,000 |
| Teeth | 60 COMB |
Features
- All-around accessibility with unique vertical structure
- Additional top storage with over 50 pockets and top bungee cord
- Easy access to vertical storage pockets
- Injected waterproof base
- Convenient compartment for personal belongings
- Padded shoulder strap, side handles, and ergonomic carrying handles
- Durable 1680D & dirt repellent material
- Daisy chain and level holder
- 77 lb. load capacity
- Compatible with all TOUGHSYSTEM 2.0 products
Includes
- 1X DEWALT Toughsystem 2.0 22" Tool Bag
Specifications
| Height | 13.000 in |
| Length | 21.000 in |
| Width | 11.000 in |
| Weight | 6.952 lbs |
| Product Type | BAGS |
| Net Lit-Ion Y/N | No |
| Warranty | LLW |
| Bare Tool | Yes |
| Case Type | Soft |
| Kit | No |
| Pocket Outside Quantity | 50 |
| Storage & Organization Type | CHESTS |
Cuts
- Metal 1/8" to 1/2"
- Cast Iron Pipe
- Pipe
- High Strength Alloys
- Stainless Steel Materials
- Angle, Tubing
Features
- High performance carbide for greater durability and cutting performance in metals with a thickness from 3/16" to 9/16"
- Enhanced carbide tip to blade connection for extreme impact resistance
- 1 in. oversized blade body for straighter cuts with less vibration
- Perma-SHIELD non-stick coating for less heat and friction
Applications
- Thick metals (3/16" to 9/16")
Specifications
| Length | 12" |
| Pack Quantity | 3 |
| Tooth Design | Carbide Teeth |
| TPI | 8 |
Features
- High performance carbide for greater durability and cutting performance in medium metal
- Enhanced carbide to blade connection for extreme impact resistance
- 10 TPI tooth geometry for clean/smooth finishes on medium metal applications
- 1 in. oversized blade body for straighter cuts with less vibration
- Ideal for cutting all metals between 1/16 in. to 5/16 in.
Cuts
- Metal 1/16" to 1/8"
- Strut
- Cast Iron Pipe
- Pipe
- Stainless Steel Materials
- Angle, Tubing
Applications
- Medium Metal (1/16" to 5/16")
Specifications
| Length | 9" |
| Pack Quantity | 3 |
| Tooth Design | Carbide Teeth |
| TPI | 10 |
Diablo's SDS-Plus Mortar Knives deliver extreme durability and stability when removing mortar in vertical joints of brick and block. A unique heat treatment process strengthens the steel body to withstand the stress of high-powered hammer drills and the impact of removing mortar. The precision plunge tip accurately plunges deep into mortar for superior efficiency. Featuring a sharp, straight edge, the tapered knife cuts away mortar with speed and ease. Optimized for maximum performance in corded and cordless SDS-Plus rotary hammers.
Features
- Extreme durability and longer life in removal of mortar between brick and block
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Precision plunge tip for superior efficiency
- Sharp, straight edge removes mortar with speed and ease
- Maximum performance in cordless and corded SDS-Plus rotary hammers
Applications
- Removing motar in brick and block
Cuts
- Brick/Block
Specifications
| Length | 8" |
| Pack Quantity | 1 |
| Shank | SDS Plus |
| Size | 3/8" |
| Chisel Type | Flat Chisel |
Diablo's SDS-Plus and SDS-Max Twist Point Chisels deliver extreme durability and stability in general demolition work and clearing reinforcements. The reflective energy collar converts impact-generated energy into new energy for maximum material removal. A unique heat treatment process strengthens the steel body to withstand the stress and impact of high-powered hammer drills. The Twist Point design provides wider flutes for faster chipping and jam-free material evacuation. Self-sharpening tip increases productivity and extends the tools life. Optimized for maximum performance in corded and cordless SDS-Plus and SDS-Max rotary hammers.
Cuts
- Concrete
Features
- Extreme durability and longer life in general demolition and clearing reinforcements
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Twist Point design resists jamming for faster chipping and material evacuation
- Self-Sharpening for increased productivity and longer life
- Maximum performance in cordless and corded SDS-Plus and SDS-Max rotary hammers
Applications
- Demolition and removal
Specifications
| Length | 10" |
| Pack Quantity | 1 |
| Shank | SDS Plus |
| Size | 3/4" |
| Chisel Type | Point Chisel |