Tools
Diablo's revolutionary, most complete range of SDS-Plus and SDS-Max Rebar Demon™ 4-cutter full-carbide head hammer drill bits are the only bits designed to be the most durable, fastest and coolest solutions on the market. The Rebar Demon bits feature up to 2X more Dura-Carbide to withstand up to 1800°F of intense heat whereas standard bits fail at 800°F. Diablo's impact resistant 4-cutter full-carbide head withstands the stress of high-powered hammer drills and the impact of rebar by taking small bites of rebar to deliver controlled carbide wear, reduced vibration and up to 7X longer life. Produced with Tri-Metal Fusion Welding, the full-carbide head resists heat and prevents breakage in extreme impact situations. Precision Tip delivers the stability and accuracy required to produce fast, precise holes in reinforced concrete for anchor setting.
Features
- Up to 7X longer life versus standard 2-cutter hammer drill bits
- Diablo made Dura-Carbide™ features up to 2X more carbide that withstands up to 1800°F of intense heat to combat rebar hits versus standard bits that fail at 800°F
- Impact Resistant 4-Cutter Full Carbide Head extracts smaller bites of rebar for controlled, consistent carbide wear and reduced vibration to deliver fast, precise holes
- Tri-Metal Fusion Welding features up to 3X stronger weld to keep the full carbide head intact during extreme impact such as rebar
- Precision Tip delivers stability and accuracy required for fast, precise holes
- Optimized flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability
- Wear mark indicator ensures precise hole making
- Optimized for maximum performance in corded and cordless SDS Plus or SDS Max rotary hammers
Cuts
- Reinforced Concrete
- Concrete
- Rebar
- Brick/Block
Applications
- Reinforced concrete and concrete
Specifications
| Diameter | 3/8" |
| Length | 12" |
| Number of Cutters | 4 |
| Pack Quantity | 25 |
| Shank | SDS Plus |
| Head Type | Full Carbide Head |
| Working Length | 10" |
Bosch Nail Strike Wood-Boring Bits are the first wood-boring bits to power through nail-embedded wood. The bit features reamer edges made of tough, reinforced steel that cut through up to 30 nails. Each bit has a fully threaded cone tip that pulls it through the wood, offering best-in-class speed through 2x4s. These bits are ideal for boring clean holes through wood fast to run conduit or pipe. The contoured paddle design also enhances chip removal, contributing to the fast performance. The hex shank with power groove reduces bit slippage in the drill and makes it suitable for use with a variety of drill types, including impact drills. These bits should not be used in a drill press and are not intended for counter boring or doweling.
Features
- Nail-killing wood-boring bit design ? adds extreme durability to Bosch speed for nail-embedded wood
- Reinforced reamer cutting edges ? make this bit the first wood-boring bit to drill through nails
- Optimized for wood and some wood with nails ? combines superior drill speed with engineered nail-cutting durability
- Fully threaded cone tip ? pulls the bit through wood quickly and effortlessly
- Contoured paddle design ? increases speed with faster chip removal
- Hex shank ? improves bit grip and allows use with a variety of drill types
- Premium bit material ? combined with innovation for great performance and life
Specifications
| Bit Diameter | 7/8" |
| Bit Material | High Carbon Steel |
| Case Included | No |
| Drilling Depth (in) | 5 |
| Flute Length (in) | 3 |
| Length (in) | 6 |
| Overall Length (in) | 6 |
| Self Feeding | Yes |
| Set / Individual | Individual |
| Shank Diameter (in) | 0.25 |
Features
- Cuts embedded rebar up to 1-1/2"
- Rebar cutters are not for enlarging holes
- The size of the rebar cutter must match the size of the drill bit used to drill the hole
- Carbide tips withstands impact and high heat applications, dramatically extending life versus standard rebar cutters
- Unique brazing and hardening process extends life of carbide tips and increases productivity.
- Optimized flute design removes dust faster, keeping the carbide tips cooler for ultimate strength and durability
- Maximum performance in corded and cordless SDS-Plus rotary hammers (rotary mode only)
Cuts
- Concrete with Rebar
- Rebar
Applications
- Rebar
Specifications
| Diameter | 1-1/4" |
| Length | 12" |
| Pack Quantity | 1 |
| Shank | SDS Plus |
| Working Length | 5" |
Features
- Cuts embedded rebar up to 1-1/2"
- Rebar cutters are not for enlarging holes
- The size of the rebar cutter must match the size of the drill bit used to drill the hole
- Carbide tips withstands impact and high heat applications, dramatically extending life versus standard rebar cutters
- Unique brazing and hardening process extends life of carbide tips and increases productivity.
- Optimized flute design removes dust faster, keeping the carbide tips cooler for ultimate strength and durability
- Maximum performance in corded and cordless SDS-Plus rotary hammers (rotary mode only)
Cuts
- Concrete with Rebar
- Rebar
Applications
- Rebar
Specifications
| Diameter | 1-1/8" |
| Length | 12" |
| Pack Quantity | 1 |
| Shank | SDS Plus |
| Working Length | 5" |
Specifications
| Height | 0.650 IN |
| Length | 2.200 IN |
| Width | 2.550 IN |
| Weight | 0.135 LB |
| Type | REPLACEMENT PARTS: SPARE PARTS |
| Battery Included | No |
Specifications
| Length | 6-7/8 in |
| Weight | 8.11301 oz |
| System of Measurement | Fractional |
| Size | 3/4 |
| Surface Finish | Black And Gold |
| Type Norseman | 51-AG |
| Material | High-Speed Steel |
| Number of Flutes | 5 |
| Reamer Minimum Starting Hole Size | .440 |
| Flute Length | 5 |
| Shank Type | 3-Flats |
| Shank Size | 1/2 |
| Point Diameter | 0.416 |
| Flute Style | Fast Spiral |
| Flute Direction | Right Hand |
| Packaging | Hanging Tube |
| DFARS | Specialty Metals COTS- Exempt |
| USMCA Qualifying | Yes |
| HTS | 820750.5 |
Specifications
| Length | 6-3/8 in |
| Weight | 5.57329 oz |
| System of Measurement | Fractional |
| Size | 5/8 |
| Surface Finish | Black And Gold |
| Type Norseman | 51-AG |
| Material | High-Speed Steel |
| Number of Flutes | 5 |
| Reamer Minimum Starting Hole Size | .340 |
| Flute Length | 4-1/2 |
| Shank Type | 3-Flats |
| Shank Size | 1/2 |
| Point Diameter | 0.323 |
| Flute Style | Fast Spiral |
| Flute Direction | Right Hand |
| Packaging | Hanging Tube |
| DFARS | Specialty Metals COTS- Exempt |
| USMCA Qualifying | Yes |
| HTS | 820750.5 |
Specifications
| Length | 6-3/8 in |
| Weight | 6.6315 oz |
| System of Measurement | Fractional |
| Size | 11/16 |
| Surface Finish | Black And Gold |
| Type Norseman | 51-AG |
| Material | High-Speed Steel |
| Number of Flutes | 5 |
| Reamer Minimum Starting Hole Size | .410 |
| Flute Length | 4-1/2 |
| Shank Type | 3-Flats |
| Shank Size | 1/2 |
| Point Diameter | 0.385 |
| Flute Style | Fast Spiral |
| Flute Direction | Right Hand |
| Packaging | Hanging Tube |
| DFARS | Specialty Metals COTS- Exempt |
| USMCA Qualifying | Yes |
| HTS | 820750.5 |
Specifications
| Length | 6-7/8 in |
| Weight | 13.4041 oz |
| System of Measurement | Fractional |
| Size | 1-INCH |
| Surface Finish | Black And Gold |
| Type Norseman | 51-AG |
| Material | High-Speed Steel |
| Number of Flutes | 5 |
| Reamer Minimum Starting Hole Size | .630 |
| Flute Length | 5 |
| Shank Type | 3-Flats |
| Shank Size | 1/2 |
| Point Diameter | 0.604 |
| Flute Style | Fast Spiral |
| Flute Direction | Right Hand |
| Packaging | Hanging Tube |
| DFARS | Specialty Metals COTS- Exempt |
| USMCA Qualifying | Yes |
| HTS | 820750.5 |
Diablo's universal fit carbide oscillating blades feature application specific designs that deliver extreme durability and superior cutting life in general purpose cuts: nail-embedded wood, clean wood, metal and plastics. High-performance carbide teeth deliver an unmatched up to 50X longer cutting life versus standard bi-metal blades. Curve contact edge creates a pilot for precise, clean plunge cuts with less vibration. An optimized blade design and Black I.C.E. (Industrial Cooling Element) keeps the teeth cool and build up free for fast, clean cuts. The blade's universal fit, adapter-free design easily attaches to most tools, with the exception of Starlock tools.
Features
- 3-Pack provides up to 33% in savings
- High performance carbide for greater durability and up to 50X longer life versus standard bi-metal blades
- Curve Contact Edge for precise, clean plunge cuts with less vibration
- Black I.C.E. coated teeth for heat resistance, long life and superior chip evacuation
- 1-1/2 in. cutting depth
- Universal interface design fits most tools, no adapters needed
- Maximum performance in cordless and corded oscillating multi-tools from Bosch®, Craftsman®, Dewalt®, Dremel®, Fein®, Hart®, Makita®, Milwaukee®, Porter-Cable®, Ridgid®, Rockwell® and more
- Not compatible with Starlock tools
Cuts
- Nail Embedded Wood
- Clean Wood
- Metal
- PVC
- Plastics
Applications
- General Purpose
Specifications
| Cut Depth (C) | 1-1/2" |
| Pack Quantity | 3 |
| Tooth Design | Carbide |
| Width of Cut | 1-1/4" |
| Interface | Universal Fit |
Features
- Perma-shield coating protects the blade from heat, gumming, and corrosion
- 1 in. Demolition body for straighter cuts with less vibration
- Ultra hardened cutting edge for up to five times longer life than standard blades
- A one-of-a-kind tip design that enables faster and easier plunging
Applications
- Nail-embedded wood
Cuts
- Clean Wood
- Nail Embedded Wood
Specifications
| Length | 9" |
| Pack Quantity | 5 |
| Tooth Design | Variable Tooth |
| TPI | 4/6 |