Tools
Diablo's Auger Bit range provides maximum performance, extreme durability and superior life in nail-embedded wood applications. A two-step cutting action creates holes that are precise and clean. The self-feeding Dura-Tip™ pulls the bit while the dual cutting edge delivers an effortless, smooth drilling experience in wood with nails. Deep flutes enhance the chip evacuation process for more holes per charge. Quick change shank increases stability and durability in cordless and corded impact wrenches and drill drivers.
Features
- Two-step cutting action for precise, clean holes in wood drilling applications
- Dura-Tip™ for extreme durability in nail-embedded wood
- Dual cutting edge design for effortless, smooth hole drilling in nail-embedded wood
- Deep flutes for fast chip removal
- 7/16 in. hex quick change shank increases stability and durability in cordless and corded impact wrenches and drill drivers
Cuts
- Hardwoods
- Softwoods
- Nail Embedded Wood
- Plywood
Applications
- Drilling clean wood and nail-embedded wood
Specifications
| Diameter | 15/16" |
| Length | 17-1/2" |
| Pack Quantity | 1 |
| Shank | Hex 7/16" |
| Working Length | 13-1/2" |
Features
- High performance carbide for greater durability and up to 50X longer life versus standard jig saw blades
- Aggressive carbide tooth geometry delivers fast and effortless cuts
- Optimized blade design reduces heat for melt-free cuts
- Enhanced carbide tip to blade connection for extreme impact resistance
- Perma-SHIELD® non-stick coating for less heat and friction
- T-shank design fits all combo and most U-shank jig saws
- Maximum performance in cordless and corded jig saws
Applications
- Composite Decking
Cuts
- Composite Decking
Specifications
| Length | 4" |
| Pack Quantity | 1 |
| Shank | T-Shank |
| Tooth Design | Carbide Teeth |
| TPI | 5/7 |
Cuts
- Hardwoods
- Softwoods
- MDF
- Particle board
- Plywood
Features
- Ultra-hardened cutting edge for up to 5x longer life than standard blades
- Optimized tooth design for fast, clean cuts
- Fast plunge tip design enables faster and easier plunging
- T-shank design fits all combo and most U-shank jig saws
- Maximum performance in cordless and corded jig saws
Applications
- Fast Wood Cutting
Specifications
| Length | 4" |
| Pack Quantity | 5 |
| Shank | T-Shank |
| Tooth Design | Bi-Metal |
| TPI | 15 |
Features
- Premium zirconium grain blend is a superior quality formulation designed for fast material removal and long sanding life
- Clog-SHIELD™, a proprietary blend of grinding agents that reduce pitch build-up and clogging
- ENDURA-BOND™, a specialized high strength resin provides superior grain bonding system for extreme durability
- For use on belt sanders in wood, metal and plastics
- Recommended use - moderate stock removal
Cuts
- Wood
- Plastics
- Metal
Applications
- Preparation
Specifications
| Backing | Cloth |
| Grit | 80 |
| Grit Blend | Zirconium Blend |
| Grit Description | Medium |
| Pack Quantity | 5 |
| Size | 3"x18" |
Lenox MetalMax Diamond Edge Cutoff Wheel, 7" x 7/8", is an alternative to bonded abrasive cut-off wheels. Breakthrough diamond technology delivers 1,000 or more cuts and 30X longer life than thin bonded cutoff wheels without sacrificing speed or finish. Made of solid steel to greatly reduce the risk of breakage, the combination of a steel body with a diamond edge allows MetalMax to hold its original wheel diameter until the last cut, meaning better control, reach, and cut precision throughout the wheel life. The enhanced design substantially reduces dust particles and lessens odor. Lenox MetalMax is suitable for metal cutting applications including steel, sheet metal, stainless steel, rebar, cast iron, aluminum and non-ferrous metals, and works at the same speeds and feeds as thin bonded abrasive wheels.Average performance in 1 carbon steel square tube vs. thin bonded abrasive cutoff wheels.Cutting wax or saw lubricant is recommended to avoid chip welding when cutting aluminum.
Features
- 1,000+ Cuts
- Metalmax Delivers 1,000 Or More Cuts With No Need For Wheel Changes. That Is 30 Times Longer Life Than Thin Bonded Cut-Off Wheels.
- Long Life
- Advanced Diamond Technology Provides Extreme Durability In Metal Cutting Applications, Leading To Increased Productivity, Reduced Downtime, And A Lower Cost Per Cut Compared To Thin Bonded Cut-Off Wheels.
- Diameter Retention
- Because Lenox Metalmax Is Made With Diamonds, It Doesn't Get Smaller. The Cutting Depth Stays The Same Throughout Its Life, Meaning Better Control, Reach And Precision.
- Less Dust Residue
- With Lenox Metalmax There Is Less Odor And Dust Residue As The Wheel Does Not Wear Down Like Bonded Abrasives. Sparks Originate Only From The Material Being Cut.
- One Wheel, Multiple Materials
- Lenox Metalmax Is Designed For Use In The Same Power Tools As Bonded Abrasive Wheels, At The Same Rpms And Feed Forces. No Changes In Operating Settings Are Required. Use Lenox Metalmax As You Would A Bonded Abrasive Wheel.
Specifications
| Height | 7.300 in |
| Length | 7.100 in |
| Width | 0.300 in |
| Weight | 0.760 lbs |
| Product Type | DIAMOND BLADE |
| Product Material Group | METAL |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Warranty | NLW |
Applications
- Preparation
Cuts
- Wood
- Plastics
- Metal
Features
- Premium aluminum oxide blend - a superior quality formulation designed for fast material removal and long sanding life
- Clog-SHIELD, a high performance stearate coating reduces pitch build-up and clogging for maximum productivity
- ENDURA-BOND, a specialized high strength resin provides superior grit-to-backing bond for extreme durability
- Recommended use - moderate stock removal and sanding preparation before paint
- For use with 1/4 sheet palm sanders in wood, metal, and plastics
Specifications
| Backing | Paper |
| Grit | 100 |
| Grit Blend | Aluminum Oxide Blend |
| Grit Description | Medium |
| Pack Quantity | 6 |
| Size | 4-1/2" x 5-1/2" |
Features
- Lightweight design (33lbs) delivers 20% less weight to carry than other competitive mobile stands
- Heavy-duty kickstand allows the stand to balance upright for mobility and storage
- Quick-connect stand brackets attach to saw for easy detachment from stand for loading and unloading
- Wide stand base and offset rear legs provide stability and support for material feed control
- Folding legs with quick-release levers collapse under the stand, minimizing overall size for transport
- Retractable, soft-grip handle slides out allowing the user to pull the saw behind him comfortably with weight near the ground
- Heavy-duty aluminum construction withstands loads up to 200lbs
- Large heavy-duty wheels can easily roll over steps, curbs, and jobsite debris
- Rubber feet keep the stand from sliding on smooth surfaces
- Table top height provides the user ideal table top positioning for a wide variety of table saw applications
Includes
- 1X DEWALT Table Saw Stand, Mobile/Rolling
Specifications
| Height | 8.700 in |
| Length | 33.630 in |
| Width | 19.770 in |
| Weight | 43.120 lbs |
| Product Type | SAW ACCESSORY |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Warranty | 1LW |
| Impacts / Blows / Blasts Per Min | 5500 |
| Uncertainty K1 (Vibration) | 2 |