Concrete Mechanical Anchors
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
Specifications
| Weight | 1.255 lbs |
| Product Type | SCREWBOLT |
| Product Finish | Zinc |
| Product Primary Material | Carbon Steel |
| Connection Design | Concrete & Masonry |
| Fastener Length | 10 |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
Specifications
| Weight | 1.045 lbs |
| Product Type | SCREWBOLT |
| Product Finish | Zinc |
| Product Primary Material | Carbon Steel |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 8 |
Features
- Internally threaded anchor for easy bolt removability and service work
- Flanged (lipped) version installs flush for easy inspection and standard embedment
- Smooth wall drop-in can be installed flush mounted or below the base material surface
- Optionally available with a knurled body
- Coil thread version accepts coil rod and typically used for concrete formwork applications
Specifications
| Weight | 0.113 lbs |
| Product Type | DROP-IN ANCHOR |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
Features
- Internally threaded anchor for easy bolt removability and service work
- Flanged (lipped) version installs flush for easy inspection and standard embedment
- Smooth wall drop-in can be installed flush mounted or below the base material surface
- Optionally available with a knurled body
Specifications
| Weight | 0.022 lbs |
| Product Type | DROP-IN ANCHOR |
Features
- Corrosion-resistant
- Carbon steel wires for durability and strength
- Ergonomic bi-material handle
- Manufactured by DEWALT
Specifications
| Height | 1.000 in |
| Length | 1.000 in |
| Width | 5.750 in |
| Weight | 0.148 lbs |
| Product Type | CHEMICAL ADHESIVE |
| Warranty | None |
Features
- General purpose anchoring
- Installs in a variety of base materials
- Roof Flashing
- Mechanical Attachments
Specifications
| Weight | 0.031 lbs |
| Product Type | PIN ANCHOR |
| Product Finish | Silver |
| Product Primary Material | Steel |
| Battery Included | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 2 |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
| Weight | 1.125 lbs |
| Product Type | WEDGE BOLT |
| Product Finish | Silver |
| Product Primary Material | Carbon Steel |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete & Masonry |
| Design Type | Hex |
| Fastener Length | 6.0 |
| Fastener Plating | Zinc |
| Head Style | Hex Nut |
| Thread Type | Standard |