Concrete Mechanical Anchors
Features
- ICC-ES Approved for Seismic Categories A-F
- Installs with standard ?-inch ANSI drill bit
- Faster installation resulting in labor savings
- Original thread design improves speed & reduces effort for faster installation
- Re-engineered steel designed to cut through hard concrete
- Integrated Drill/Drive system for single tool installation
Specifications
| Length | 3.25 in |
| Width | 2.5 in |
| Height | 0.75 in |
| Weight | 0.095 lbs |
| Power Source | NON-ENERGY USING |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
The Titen HD anchor is a high-strength screw anchor for concrete and masonry. It is designed for optimum performance in both cracked and uncracked concrete. The high-strength, easy-to-install Titen HD anchor has been tested and shown to provide outstanding performance in cracked and uncracked concrete under both static and seismic loading conditions. The self-undercutting, non-expansion characteristics of the Titen HD anchor make it ideal for structural applications, even at reduced edge distances and spacings. Recommended for permanent dry, interior non-corrosive environments or temporary outdoor applications.
Features
- Qualified for static and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer and provides a clean installed appearance
- Carbon steel Titen HD utilizes a specialized heat-treating process that creates tip hardness for better cutting without compromising the ductility
- Zinc-plated carbon steel anchor can be used for temporary exterior applications
- Caution: Use a Titen HD screw anchor one time only installing the anchor multiple times may result in excessive thread wear and reduce load capacity
Specifications
| Depth | 0.56 in |
| Size | 1/4 in. x 4 in. |
Features
- Internally threaded anchor for easy bolt removability and service work
- Flanged (lipped) version installs flush for easy inspection and standard embedment
- Smooth wall drop-in can be installed flush mounted or below the base material surface
- Optionally available with a knurled body
- Coil thread version accepts coil rod and typically used for concrete formwork applications
Specifications
| Weight | 0.059 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
Features
- Maximum durability and stability for setting masonry screws and concrete anchors
- 2-in-1 quick drill and anchor fastening system
- Compatible with 5/32", 3/16" and 1/4" Concrete Anchor Hammer Drill Bits
- Compatible with quick change bits and nut setters
- Maximum performance in cordless and corded SDS-Plus rotary hammers and 1/4 in. hex tools
Cuts
- Concrete
- Brick/Block
Applications
- Anchor setting
Specifications
| Length | 5-3/4" |
| Number of Cutters | 2 |
| Pack Quantity | 1 |
| Shank | SDS Plus |
| Working Length | 5-3/4" |
Hangermate is an all steel threaded fastening system for suspending steel threaded rod vertically overhead in pipe hanging, fire protection, electrical conduit and cable-tray applications. They are available in versions which can be installed in a variety of base materials including steel purlins, bar joists and beams, wood frame columns and beams, as well as concrete ceilings, beams and columns. Steel threaded rods in 1/4 and 3/8" diameters can be vertically suspended with Hangermate (a 1/2" diameter size is also available for wood). They are also offered in a side mount style for lateral installation of 1/4" and 3/8" diameter steel threaded rods onto joists, columns and overhead members. For all steel and wood hangers, a Hangermate Socket Driver is recommended to provide proper installation with a drill screw gun. For concrete hangers, a powered impact tool with a clutch is recommended. A pivot head version is also available for flexible connection angle and positioning of rod hangers. An acoustical ceiling eyelet version is also available for hanging wire or cable attachments.
Features
- Ease and speed of overhead installation
- Lower in-place cost, when compared to beam clamps, lag bolts and drop-ins
- Steel and wood Hangermate can be installed with a drill screw gun
- Side mount versions available for steel and wood Hangermate
Specifications
| Length | 0.978 in |
| Width | 0.244 in |
| Height | 0.75 in |
| Weight | 0.074 lbs |
| Power Source | NON-ENERGY USING |
Specifications
| Length | 5 in |
| Width | 0.5 in |
| Height | 0.5 in |
| Weight | 0.13 lbs |
| Individual Vs. Set (Syndigo) | SET |
Features
- Variety of head styles, lengths and sizes
- All steel component design
- Preassembled anchor for immediate installation
- Sleeve design keeps anchor centered in hole
- Sleeve has 360° contact area for even stress distribution
- Versatile can be used for solid and hollow concrete or masonry applications
Specifications
| Weight | 0.073 lbs |
| Product Diameter Us | 0.375 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete Only |
| Fastener Length | 0.375 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Simpson Strong-Tie® mechanical anchors are designed to install easily and securely into a variety of base materials, including concrete, grouted and hollow CMU and brick. Specifiers and contractors trust Simpson Strong-Tie anchors for optimum performance under the most demanding structural applications. The stainless-steel Titen screws attach various types of components to concrete and masonry in environments where a medium level of corrosion resistance is required. Available in hex and Phillips head, Titen screws are designed for use with appropriately sized drill bits that are included with each box.
Features
- Titen hex-head screw
- Suitable for concrete, brick, grout-filled CMU and hollow-block applications
- Suitable for some preservative-treated wood applications
- Made from Type 410 stainless steel
- Zinc plated with a protective overcoat
Specifications
| Depth | 0.432 in |
| Size | 1/4 in. x 1-1/4 in. |
| Drill bit diameter | 3/16 in. |
Diablo’s concrete anchor drive set is one of the strongest, most durable, and fastest installation sets. Diablo’s full-carbide head concrete anchor hammer drill bits withstand the stress of high-powered hammer drills and the impact of rebar cutting, delivering extreme durability and strength. The Phillips drive bits and magnetic nut setters deliver maximum performance and extreme durability in driving hex nuts or self-tapping screws. A magnetic anchor drive sleeve delivers the stability and rigidity necessary for precise setting of screws and anchors. Optimized for maximum performance in corded and cordless SDS-Plus rotary hammers.
Features
- 7-Piece set for up to 25% savings
- Diablo made carbide hammer bits withstand impact and high heat applications, dramatically extending life versus standard hammer bits
- Phillips drive bits provide extreme durability and impact resistance for up to 50X longer life versus standard bits
- Magnetic nut setters and drive bit holder includes a permanent magnet to eliminate wobbling by securely gripping screws and hex nuts
- Includes (1) DMAPL2910 5/32 in. x 6 in. SDS-Plus Full Carbide Head Concrete Anchor Hammer Drill Bit
- Includes (1) DMAPL2920 3/16 in. x 6 in. SDS-Plus Full Carbide Head Concrete Anchor Hammer Drill Bit
- Includes (1) DPH22P1 2 in. #2 Phillips Drive Bit
- Includes (1) DPH32P1 2 in. #3 Phillips Drive Bit
- Includes (1) DMAPL2960 SDS-Plus Anchor Drive Sleeve
- Includes (1) DNTSS14 1/4 in. Magnetic Nut Setter
- Includes (1) DNTSS516 5/16 in. Magnetic Nut Setter
- Maximum performance in cordless and corded SDS-Plus rotary hammers
Cuts
- Concrete with Rebar
- Concrete
- Rebar
- Brick/Block
Applications
- Concrete
- Anchor Setting
Specifications
| Pack Quantity | 7 |
| Shank | SDS Plus |