Home
> DEWALT 3/4-Inch By 8-Inch By 13-1/2-Inch 4-Cutter Sds Max Rotary Hammer Bit
DEWALT 3/4-Inch By 8-Inch By 13-1/2-Inch 4-Cutter Sds Max Rotary Hammer Bit
Item #:
DW5810
Manufacturer Item: DW5810
The DW5810 SDS Max Rotary Hammer Bit handles the toughest concrete, stone, and other masonry materials with ease. Its Rock Carbide tip extends bit life much longer than other bits, and its tough steel construction makes this hammer bit durable and long-lasting. The DW5810's open head design helps channel dust and debris into the flutes for more efficient drilling, and the helix four-flute construction removes this debris from the drilling surface quickly for easier drilling. This bit measures...
| Quantity | Price |
| 1 | 59.99 |
The DW5810 SDS Max Rotary Hammer Bit handles the toughest concrete, stone, and other masonry materials with ease. Its Rock Carbide tip extends bit life much longer than other bits, and its tough steel construction makes this hammer bit durable and long-lasting. The DW5810's open head design helps channel dust and debris into the flutes for more efficient drilling, and the helix four-flute construction removes this debris from the drilling surface quickly for easier drilling. This bit measures 3/4-inch in diameter, 8 inches usable length, and 13-1/2 inches overall length.
Features
- Extreme durability: IRON BLAST TECHNOLOGYstrengthens the bit
- 2X longer life: Full carbide head in 4 cutter design
- Stands up to rebar strikes: Redesigned head geometry to withstand rebar strikes
- Wear mark indicator: For accurate diameter of holes
- NO BREAK GUARANTEE: If your bit fails for any reason while the wear mark is still visible, we'll replace it (excludes: DW5861, DW5830, DW5831)
- CONTROLLED PENETRATION INTO CONCRETE: Pilot point design for quick starts into the material and accurate holes.
- FAST DRILLING: Optimized flute design removes dust quickly from the hole for fast drilling.
- ANCHOR WEAR MARK INDICATOR: For drilling accurate hole diameters when using the bit to install anchors. Located on the flute of the bit, once the wear mark is no longer visible it is time to change the bit for proper anchor installation.
- High Impact tip maximizes carbide surface contact for longer bit life.
Specifications
| Length | 1.16 in |
| Width | 1.16 in |
| Height | 15.25 in |
| Weight | 1.1 lbs |
| Product Diameter Us | .75 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | No |
| Disclaimer | DEWALT ELITE SERIES 5/8" X 21" SDS MAX drill bit DW5809 vs. BOSCH HC5021 drilling C35/C45 concrete. BOSCH is a registered trademark of ROBERT BOSCH GMHB, which has not endorsed or approved this comparison. | If your drill bits fails for any reason while the anchor wear mark is still visible on the product head, DEWALT will replace it free of charge. For more details, visit: www.DEWALT.com/support/warranty |
| Prop 65 Generic Warning | No |
| Warranty | MWC |
| Chuck Type | SDS-Max |
| Flute Length | 13 In |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Shank Diameter | SDS-Max |
| Product Primary Material | Carbide Tipped |