Concrete Mechanical Anchors
Features
- Variety of head styles, lengths and sizes
- All steel component design
- Preassembled anchor for immediate installation
- Sleeve design keeps anchor centered in hole
- Sleeve has 360° contact area for even stress distribution
- Versatile can be used for solid and hollow concrete or masonry applications
Specifications
| Weight | 0.027 lbs |
| Product Type | LOKBOLT |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete Only |
| Fastener Length | 1.375 |
Features
- Variety of head styles, lengths and sizes
- All steel component design
- Preassembled anchor for immediate installation
- Sleeve design keeps anchor centered in hole
Specifications
| Weight | 0.111 lbs |
| Product Type | LOKBOLT |
| Connection Design | Concrete Only |
CSI Spiral Drive Pins are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with an 8mm head and 0.157" diameter shank in various lengths. A spiral knurled shank design provides consistent optimized performance in steel base materials. For single fasteners, a plastic washer is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide centered guidance during the driving operation. The fasteners are also available in collated strips.
Specifications
| Weight | 0.009 lbs |
| Product Type | POWDER ACTUATED NAILS |
Features
- Internally threaded anchor for easy bolt removability and service work
- Flanged (lipped) version installs flush for easy inspection and standard embedment
- Smooth wall drop-in can be installed flush mounted or below the base material surface
- Optionally available with a knurled body
Specifications
| Weight | 0.022 lbs |
| Product Type | DROP-IN ANCHOR |
Features
- Internally threaded anchor for easy bolt removability and service work
- Flanged (lipped) version installs flush for easy inspection and standard embedment
- Smooth wall drop-in can be installed flush mounted or below the base material surface
- Optionally available with a knurled body
- Coil thread version accepts coil rod and typically used for concrete formwork applications
Specifications
| Weight | 0.059 lbs |
| Product Type | DROP-IN ANCHOR |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
Features
- Maximum durability and stability for setting masonry screws and concrete anchors
- 2-in-1 quick drill and anchor fastening system
- Compatible with 5/32", 3/16" and 1/4" Concrete Anchor Hammer Drill Bits
- Compatible with quick change bits and nut setters
- Maximum performance in cordless and corded SDS-Plus rotary hammers and 1/4 in. hex tools
Cuts
- Concrete
- Brick/Block
Applications
- Anchor setting
Specifications
| Length | 5-3/4" |
| Number of Cutters | 2 |
| Pack Quantity | 1 |
| Shank | SDS Plus |
| Working Length | 5-3/4" |
Hangermate is an all steel threaded fastening system for suspending steel threaded rod vertically overhead in pipe hanging, fire protection, electrical conduit and cable-tray applications. They are available in versions which can be installed in a variety of base materials including steel purlins, bar joists and beams, wood frame columns and beams, as well as concrete ceilings, beams and columns. Steel threaded rods in 1/4 and 3/8" diameters can be vertically suspended with Hangermate (a 1/2" diameter size is also available for wood). They are also offered in a side mount style for lateral installation of 1/4" and 3/8" diameter steel threaded rods onto joists, columns and overhead members. For all steel and wood hangers, a Hangermate Socket Driver is recommended to provide proper installation with a drill screw gun. For concrete hangers, a powered impact tool with a clutch is recommended. A pivot head version is also available for flexible connection angle and positioning of rod hangers. An acoustical ceiling eyelet version is also available for hanging wire or cable attachments.
Features
- Ease and speed of overhead installation
- Lower in-place cost, when compared to beam clamps, lag bolts and drop-ins
- Steel and wood Hangermate can be installed with a drill screw gun
- Side mount versions available for steel and wood Hangermate
Specifications
| Height | 0.750 in |
| Length | 0.978 in |
| Width | 0.244 in |
| Weight | 0.074 lbs |
| Product Type | HANGERMATE ANCHOR |
Specifications
| Height | 0.500 in |
| Length | 5.000 in |
| Width | 0.500 in |
| Weight | 0.130 lbs |
| Product Type | DROP-IN ANCHOR |
Features
- Variety of head styles, lengths and sizes
- All steel component design
- Preassembled anchor for immediate installation
- Sleeve design keeps anchor centered in hole
- Sleeve has 360° contact area for even stress distribution
- Versatile can be used for solid and hollow concrete or masonry applications
Specifications
| Weight | 0.073 lbs |
| Product Type | LOKBOLT |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete Only |
| Fastener Length | 0.375 |
Features
- Designed for consistent installation of Steel Dropin anchors using a standard hammer.
- Setting Tools Designed to install Steel Dropin Internally Threaded Expansion Anchors
- Pack Qty: 1
- Manufactured by DEWALT
Specifications
| Height | 0.500 in |
| Length | 6.500 in |
| Width | 0.050 in |
| Weight | 0.710 lbs |
| Product Type | DROP-IN ANCHOR |