Corded Demolition Hammers and Breakers

Features

• Variable speed trigger enables user to match the speed to the application for greater versatility
• Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
• Recessed hammer function selector provides 3-mode operation for "Rotation Only", "Hammering with Rotation" or "Chipping" for multiple applications
• Depth Gauge (331886-4)
• Anti-Vibration Technology (AVT®) is an internal counterbalance system that greatly reduces vibration by moving a counterweight in the opposite direction of the drive piston
• Retractable hook allows tool to remain close by but never in the way
• DURABILITY - Torque limiting clutch engineered to prevent gear damage by disengaging gears if the bit binds
• 3-mode operation for "Rotation Only", "Hammering with Rotation" or "Chipping" for multiple applications
• POWER - 8 AMP motor delivers 2.1 ft.lbs. of impact energy
• Side Handle (451749-9)
• INCLUDES - Side handle, depth gauge and tool case
• Tool Case (824695-3)
• Anti-Vibration Technology (AVT®) is an internal counterbalance system that greatly reduces vibration
• Integrated damper spring at the base of the impact bolt is engineered to absorb impact vibrations from the drill bit
• 40 bit angle settings allow the bit to be set at different positions for operating convenience
• COMFORT - Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration
• Powerful 8 AMP motor delivers 2.1 ft.lbs./2.9 J. of impact energy to handle the most demanding applications
• Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
• Ergonomic "D-shaped" handle with rubberized soft grip for increased comfort
• Recessed hammer function selector located below gear housing for improved durability
• VERSATILITY - 3-mode operation; "Rotation Only", "Hammering with Rotation" or "Chipping" for multiple applications
• Powerful 8 AMP motor delivers 2.1 ft.lbs. of impact energy to handle the most demanding applications

Specifications

Features

• Advanced AVT® includes an integrated damper spring at the base of the impact bolt engineered to absorb impact vibrations from the drill bit
• Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
• Side Handle Assembly (123138-5)
• 24 bit angle settings allow the bit to be set at different positions for operating convenience
• Advanced Anti-Vibration Technology (AVT®) is a synchronized, three-component system that more effectively reduces vibration resulting in a low 5m/s2
• Electronic Controller is a feature package that provides constant speed control, soft start, soft no-load and variable speed
• COMFORT - Air actuated counterbalance actively reduces vibration
• Lock-on or trigger activation in "Chipping Only" mode with a push button start/stop control for more convenient operation
• Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
• PERFORMANCE - Vibration absorbing housing moves independently of the motor and drive mechanism
• Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
• Hammer Bit Grease (194683-7)
• Advanced AVT® is an air actuated counterbalance, vibration absorving housing and impact bolt damper spring that more effectively reduces vibration
• Advanced AVT® includes a vibration absorbing housing with a spring loaded back handle and housing which moves independently of the motor and hammer mechanism effectively isolating more vibration away from the user
• Tool Case (141977-1)
• Automatic brush cut-off protects commutator from damage for longer tool life
• "Soft no-load" function automatically reduces the speed of the motor when idling to help increase tool life and performance
• ERGONOMICS - Integrated damper spring at the base of the impact bolt is engineered to absorb impact vibrations
• Variable speed control dial enables user to match the speed to the application for greater versatility
• Depth Gauge (331955-1)
• L.E.D. power light indicates switch failure or cord damage
• Soft start suppresses start-up reaction for more precision and better accuracy
• CONVENIENCE - Lock-on or trigger activation in "Chipping Only" mode with a push button start/stop control
• Advanced AVT® includes an air actuated counterbalance that directs air pressure from the crank and barrel room into the counterbalance cylinders to move counterweight pistons in the opposite direction of the hammer mechanism to effectively reduce vibration
• D-Handle Assembly, HR4013C (196792-8)
• 2-mode operation for "Chipping Only" or "Hammering with Rotation"
• Includes a 16.4 ft. power cord for user convenience
• One-touch sliding chuck for quick bit changes
• INCLUDES - Side handle, D-handle, depth rod, grease and case
• Powerful 11 AMP motor delivers 8.4 ft.lbs. / 11.4 J. of impact energy to handle the most demanding applications
• L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
• L.E.D. light indicates electrical failure or notifies the user approximately 8 hours before brushes need to be replaced

Specifications

Features

• SHOCKS - active vibration control reduces vibration felt by the user at the handles. A perform and protect feature.
• 52 joules of impact energy provides maximum performance
• 15 amp motor provides maximum power and overload protection
• Rubber-coated handles provide greater comfort and control
• Electronic Soft Start increases productivity by reducing bit walking
• Hammer Truck provides easy transportation of pavement breaker
• Uses 1-1/8" Hex Demo Steel
• Compatible with DWH052K chiseling dust extraction system

Includes

• (1) Flat foot plate for hammer truck | (1) Pegged foot plate for hammer truck | (1) Bull point chisel | (1) 1" Cold chisel | (1) 3" Wide chisel | (1) Kit box | (1) Hammer truck

Specifications

Features

• PERFORMANCE - 3-mode operation for:"Rotation Only" , "Hammering with Rotation" or "Hammering Only"
• Powerful 7.0 AMP motor delivers 2.1 ft.lbs. of impact energy to handle the most demanding applications
• Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
• Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
• Plastic Tool Case (824789-4)
• Side Handle (154842-5)
• CONVENIENCE - Built-in L.E.D. light illuminates drilling surface
• L.E.D. light illuminates drilling surface for more productivity in low light applications
• 3-mode operation for "Rotation Only", "Hammering with Rotation" or "Hammering Only"
• Vibration-absorbing back handle for operator comfort
• Extended life brushes for more work between service intervals and less downtime
• POWER - 7.0 AMP motor delivers 0 - 1,100 RPM and 0 - 4,500 BPM for demanding applications
• COMFORT - Compact design with padded grip and side handle for increased operator comfort
• Recessed lock-on button for continuous operation
• "No hammering when idling" function helps increase tool life
• Powerful 7.0 AMP motor delivers 2.1 ft.lbs. of impact energy
• Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
• Depth Gauge (324219-0)
• One-touch sliding chuck for quick bit changes
• INCLUDES - Side handle, depth gauge and case

Specifications

Features

• 2.1 Ft-lbs of torque: Provides 10% faster drilling and up to 35% harder hits
• 3-Mode operation: Choose rotary hammer, hammer only and rotation only for maximum versatility
• Mechanical clutch: Protects the tool when the bit binds
• Powerful 8-amp motor: Delivers 0-1,620 RPM, 0-5,860 BPM with up to 40% faster drilling speeds than the competition
• Rotating Brush Plate: Provides Equal power in forward and reverse for easy removal of jammed bits, plus extends brush life
• Variable Position Chisel Stop: Allows material to be adjusted, regardless of orientation

Specifications

Features

• Powerful 5.5 amp Motor: Delivers 0-3, 700 RPM, 0-4,400 BPM and 1.5 ft-lbs of torque, providing up to 65% faster drilling speeds
• Lightweight 4.6 lb design: reduces fatigue when you drill overhead and in horizontal applications
• Compact 10.9 in. profile: lets you work more efficiently in tights spaces
• 2-Mode operation: choose rotary hammer or rotation only for added versatility
• AVS - anti vibration system: delivers maximum comfort by minimizing vibration
• Mechanical clutch: protects the motor when the bit binds

Specifications