S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Corded Power Tools
While cordless tools have become increasingly popular in recent years, there are still many tasks that corded power tools can perform more effectively. For example, corded drills are often used to create large holes or to power through tougher materials, while corded saws can provide more consistent cutting power than their cordless counterparts. In addition, corded tools are often less expensive than cordless models.Ask one of our professional customer service associates about our line of cordless power tools. Call us today at 1-800-432-8979 or fill out our contact form. We are here to help you get the job done right.
Features
- Quick release table/base clamp cuts 0° to 45°
- Smooth bevel and angle cutting adjustments
- Eye protection plate.
- Table/base clamp with quick release
- Low speed high torque motor
- High precision durable steel construction
- Cast aluminum base
Specifications
| Current/Voltage | 120 V |
| Power consumption | 1,800 W |
| No load speed | 1,300 rpm |
| Saw blade Ø (in) | 14 |
| Saw blade Ø (mm) | 355 |
| Arbor (in) | 1 |
| Arbor (mm) | 25.4 |
| Max. depth of cut, angular (in) | 4-3/4 |
| Max. depth of cut, angular (mm) | 121 |
| Max. depth of cut, round (in) | 5 |
| Max. depth of cut, round (mm) | 130 |
| Weight (lbs) | 53.79 |
| Weight (kg) | 24.4 |
Features
- 10 amp motor delivers increased drilling performance
- Patented DEWALT -built motor design generates 50% more power with increased overload protection for added durability
- Dual Mode: hammerdrill / drill for versatility in masonry, wood, or steel drilling applications
- 2-Speed range for high-speed drilling or high-torque applications
- Soft grip handle and two-finger trigger for increased comfort and greater control
- Metal-gear housing for jobsite durability and increased reliability
- 360-degree locking side handle with soft grip for greater control and versatility
Specifications
| Height | 3.250 IN |
| Length | 10.500 IN |
| Width | 14.440 IN |
| Weight | 7.750 LB |
| MAXIMUM SPEED | 3500 RPM |
The Makita 14" Cut-Off Saw (LW1401) is a metal-cutting solution built for light gauge metal stud and strut, pipe, all thread, conduit, tubing, rebar, and more. The 15 AMP motor delivers 3,800 RPM for the most demanding metal cutting applications. It is engineered to cut up to 5" round stock, 4-11/16" square tube, and 4" x 7-5/8" or 2-3/4" x 9-1/8" rectangular tubing. It also features fence adjustment up to 45 degrees right or left, and a "tool-less" vice adjustment for increased productivity. The LW1401 weighs only 37 pounds with a locking pin that secures the cutting head in the down position for easy transport and storage. Additional features include a large ergonomic handle and two-stage lock-off power button.
Includes
- (1) 14" x 1" x 7/64" Abrasive Cut-Off Wheel (A-93859-1)
- (1) Socket Wrench (782210-8)
Features
- Powerful 15 AMP motor delivers 3,800 RPM for superior performance and durability
- Adjustable spark guard designed to divert sparks
- Two-stage lock-off power button for operator convenience
- Fence adjustment up to 45º for angle cuts; adjusts to 3 locations for various material sizes
- Tool-less" vice adjustment for quick and easy clamping of material
- Chain secures cutting head in down position for transport and storage
- Large ergonomic handle for operator comfort when performing various cutting applications
- Weights only 37 lbs. for increased job site portability
- Carrying handle is ergonomically positioned to provide a balanced weight distribution for increased comfort while transporting the saw
- Wrench stores on base for operator convenience
- Spindle lock for easy wheel changes
Specifications
| AMPS | 15 |
| Blade Diameter | 14" |
| No Load Speed | 3,800 RPM |
| Max. Cutting Capacity (at 90°) | 5" |
| Arbor | 1" |
| Tool-less blade change | No |
| Tool-less fence adjustment | No |
| Lock-Off Switch | Yes |
| Electric Brake | No |
| Overall Length | 19-3/4" |
| Net Weight | 37 lbs. |
| AC/DC switch | No |
| Shipping Weight | 50.4 lbs. |
Features
- Helps to redirect sparks and debris away from the user
- Installs quickly and easily for convenience
- Can be rotated to for optimal positioning and user comfort
- Made of high quality steel for durability
- For use in grinding applications
Specifications
| Product Type (LN, W, WG, F) | Wheel Guards |
| Tool Size (in.) | 7" |
| Shelf Pack Qty | 1 |
| Shipping Weight | .92 lbs. |
Features
- 2-1/4 HP (maximum motor HP), 12.0 amp electronic variable speed motor provides the power to rout smoothly through the toughest hardwoods
- Electronic variable speed with full feedback control for constant speed under load from 8,000-24,000 rpm and soft start to reduce start-up torque for enhanced control
- Micro-fine depth adjustment ring provides precise depth adjustments in 1/64" increments and adjusts vertically for a constant switch/cordset location
- Adjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-locking
- Quick release motor latches for fast and easy motor pack removal for bit and base changes
- Detachable cordset offers cordset serviceability and removes the need for a "shorty" cord motor pack
- Spindle lock button allows for single-wrench bit changes
- Clear, LEXAN sub-base provides enhanced base durability, bit visibility, and accepts standard template guide bushings
- Rubber overmolded handles and low center of gravity design provide best-in-class comfort, balance, and control
- Dust-Sealed Switch protects against dust ingestion for longer switch life
Specifications
| Height | 7.250 IN |
| Length | 10.750 IN |
| Width | 9.500 IN |
| Weight | 10 LB |
| MAXIMUM SPEED | 24000 RPM |
Features
- 11 amp 1400 MWO motor provides high operating speeds under heavy loads
- Lanyard Ready(TM) integrated lanyard connection point
- Brake slows wheel 50% faster once trigger is released as compared to DWE402 with DW4541 wheel
- One-Touchguard allows quick and easy guard adjustments with a single action
- Dust Ejection Systemcontributes to long motor life
- Anti-Rotation E-CLUTCHSystem activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor.
- Lanyard not included
Specifications
| Height | 4.810 IN |
| Length | 15.630 IN |
| Width | 5.940 IN |
| Weight | 6.700 LB |
| MAXIMUM SPEED | 11000 RPM |
| WHEEL DIAMETER | 4.5 in |
The Makita 1" AVT® Rotary Hammer (model HR2641, with D-Handle) is engineered with Anti-Vibration Technology (AVT®), an internal counterbalance system for significantly less vibration. The HR2641 combines performance and power with less vibration in a compact size, and is ideal for a range of applications including overhead drilling. The HR2641 has an 8 AMP motor that delivers 2.9 Joules (2.1 ft.lbs.) of impact energy to handle the most demanding applications. The 3-mode operation offers "rotation only", "hammering with rotation" or "chipping only" for multiple applications. Modes can be easily changed with a recessed hammer-function selector, which is located below the gear housing for improved durability. The ergonomic D-shaped handle with a rubberized soft grip provides increased operator comfort, as well as a retractable tool hook to secure the tool to studs, ladders, and rails when not in use. The HR2641 is engineered for a range of applications including overhead drilling into concrete, wood and metal, removing tile, and more. It is ideal for a range of trades including masons, plumbers, electricians, sprinkler installers, city maintenance crews, and general contractors seeking a best-in-class 1" rotary hammer.
Features
- Powerful 8 AMP motor delivers 2.1 ft.lbs./2.9 J. of impact energy to handle the most demanding applications
- Anti-Vibration Technology (AVT®) is an internal counterbalance system that greatly reduces vibration by moving a counterweight in the opposite direction of the drive piston
- Integrated damper spring at the base of the impact bolt is engineered to absorb impact vibrations from the drill bit
- Recessed hammer function selector located below gear housing for improved durability
- Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
- Variable speed trigger enables user to match the speed to the application for greater versatility
- 3-mode operation for "Rotation Only", "Hammering with Rotation" or "Chipping" for multiple applications
- 40 bit angle settings allow the bit to be set at different positions for operating convenience
- Ergonomic "D-shaped" handle with rubberized soft grip for increased comfort
- Retractable hook allows tool to remain close by but never in the way
- Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
Includes
- (1) Side Handle (451749-9)
- (1) Depth Gauge (331886-4)
- (1) Tool Case (824695-3)
Specifications
| AMPS | 8 |
| Max. Capacity (concrete drilling) | 1" |
| Optimum Range (concrete drilling) | 1/4" - 5/8" |
| Max. Capacity (concrete drilling w/ core bit) | 3-1/8" |
| Impact Energy (ft.lbs.) | 2.1 |
| Impact Energy (Joules) | 2.9 J |
| Blows Per Minute (variable speed) | 0 - 4,500 BPM |
| No Load Speed (variable speed) | 0 - 1,100 RPM |
| Vibration Control | Yes |
| Vibration (m/s²) | 11.5 |
| Overall Length | 16-5/8" |
| Cord Length (ft) | 13.1' |
| Net Weight | 7.1 lbs. |
| Bit Type | Accepts SDS-PLUS |
| Power Type | Corded |
| Bind-Up Control | No |
| Shipping Weight | 12.13 lbs. |
The 9564P 4-1/2 in. Angle Grinder combines a Makita-built 10 AMP motor with best-in-class durability features to deliver more output power and increased performance. The 9564P is ideal for welders, fabricators, ship yard contractors, masons, electricians, automotive technicians, stone and tile contractors, HVAC, and more. The 9564P is equipped with SJS™ mechanical clutch syster, a Makita innovation engineered to protect the motor and gears. With SJS™, the drive shaft from the armature to the drive gear is spring-loaded during normal grinding load. If binding occurs or the wheel is forced to stop, the spring is compressed, which allows the drive shaft to slip. The result: gear tension is minimized for longer gear life as the armature continues to rotate, which helps prevent motor burn-out. The motor-protection function of SJS™ is mechanical, not electronic. This is a key point-of-difference, as the mechanical function does not require the contractor to stop and re-start the tool in the event that the wheel is forced to stop. With an electronic clutch, the tool requires a re-start. The 9564P is distinguished from other grinders in its class by three innovative dust and debris defense features. First is Labyrinth Construction, a series of channels engineered to capture dust and debris. This prevents contaminants from penetrating the gear box and main bearing. A second feature is Makita's unique "zig zag" application pattern, which is a more innovative option than simply covering the coils with epoxy. The zig-zag pattern allows space for heat to escape, yet at the same time the zig-zag pattern forms a solid barrier under rotation to prevent debris from attaching. Finally, the Dust Sealed Drive Bearing is a spring-loaded metal seal is engineered to stop dust and debris from entering the drive bearing. Additional performance features include a larger cooling fan and blades, which pull more air through the motor to help maintain lower operating temperatures, as well as spiral bevel gears for smoother rotations and a more efficient transfer of power.
Features
- Powerful 10.0 AMP motor delivers more output and 11,900 RPM for the most demanding applications
- SJS™ technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop
- Larger cooling fan and blades pull more air through the motor to help maintain lower operating temperature
- Paddle switch with no lock-on for operator comfort
- Labyrinth construction prevents debris from penetrating the motor, bearings and gears for longer tool life
- "Clam-shell" gear box design for greater durability and easier servicing.
- Spiral bevel gears for smoother rotations and a more efficient transfer of energy
- Zig-zag varnish protects the armature coil from dust and debris for longer motor life
- Spring loaded metal sealed drive bearing is engineered to prevent dust and debris from penetrating drive bearing
- Tool-less" wheel guard for more convenient adjustments
Includes
- (1) 4-1/2" Tool-less Wheel Guard (135107-4)
- (1) Lock Nut (193465-4)
- (1) Lock Nut Wrench (782424-9)
- (1) Inner Flange (224399-1)
- (1) Side Handle (153489-2)
Specifications
| Wheel Diameter | 4-1/2" |
| AMPS | 10 |
| No Load Speed | 11,900 RPM |
| Spindle Type | 5/8" - 11 UNC |
| Lock-On Switch | No |
| Lock-Off Switch | Yes |
| Switch Type | Body grip/paddle |
| Overall Length | 12-1/8" |
| Net Weight | 5.1 lbs. |
| Variable speed dial | No |
| Power Type | Corded |
| Bind-Up Control | Yes |
| Shipping Weight | 6.5 lbs. |
Makita's 4-1/2" Angle Grinder combines 7.5 AMP power with comfort and motor-protection features for longer-lasting industrial performance. The 9557PB Angle Grinder delivers 11,000 RPM. The Angle Grinder also features a range of durability features including labyrinth construction which seals and protects the motor and bearings from dust and debris for longer tool life, as well as a protective zig-zig varnish engineered to seal the armature from dust and debris. Ease-of-use features include an extra large paddle switch for comfortable operation, and a lock-on/off feature for continuous operation. The 9557PB weighs only 4.5 lbs., with a side handle that can be easily installed on either side of the tool. This grinder also has an AC/DC switch for use with alternative-power sources. The 9557PB is a versatile and powerful grinder engineered for cutting, grinding and polishing applications.
Features
- Powerful 7.5 AMP motor delivers 11,000 RPM for high output power
- Compact design with small 2-1/2" diameter barrel and weighs only 4.5 lbs. for added comfort
- Labyrinth construction seals and protects the drive gear and bearings from contamination for longer tool life
- Lock-on/off feature for continuous operation
- AC/DC switch for use with alternative power source
- Protective zig-zig varnish seals the armature from dust and debris for longer tool life
- Extra large paddle switch for comfortable operation
- Thicker coil wires are wound more closely to reduce heat and energy loss
- All-ball bearing design and metal gear housing for durability
- Push button spindle lock for operator convenience
- Labyrinth construction seals and protects the drive gear and bearings from contamination
- AC/DC paddle switch for use with alternative power sources
- POWER - 7.5 AMP motor delivers 11,000 RPM
- COMFORT - Large paddle switch for easy operation; less weight (4.5 lbs.)
- DURABILITY - Labyrinth construction, zig-zag varnish and thicker coil wires for longer tool life
- CONVENIENCE - AC/DC paddle switch for use with alternative power sources
- INCLUDES - Grinding wheel, wheel guard, side handle, inner flange, lock-nut, and wrench
Includes
- 4-1/2" Grinding Wheel (A-95956)
- 4-1/2" Wheel Guard (125273-5)
- Lock Nut (193465-4)
- Lock Nut Wrench (782422-3)
- Inner Flange (224399-1)
- Side Handle (153489-2)
Specifications
| Wheel Diameter | 4-1/2" |
| AMPS | 7.5 |
| No Load Speed | 11,000 RPM |
| Spindle Type | 5/8" - 11 UNC |
| Lock-On Switch | Yes |
| Lock-Off Switch | Yes |
| Switch Type | Body grip/paddle |
| Overall Length | 10-3/4" |
| Net Weight | 4.5 lbs. |
| Shipping Weight | 6.39 lbs. |
| Variable speed dial | No |
| Power Type | Corded |
| Bind-Up Control | No |
The D25980K 1-1/8-inch 80lb demolition hammer delivers a concrete pulverizing 52 joules of impact energy. The dependable and hard hitting German engineered mechanism, delivers long life. With its all metal housing and barrel, this demo hammer was meant for heavy-duty applications like floor trenching for pipe, breaking out stairs/risers, creating openings into shafts, breaking asphalt, loosening/breaking hard packed dirt/gravel/clay and confined space work when big power is needed. The Active Vibration Control technology employed delivers reduced user vibration for less user fatigue and greater productivity.
Features
- SHOCKS - Active Vibration Control reduces vibration felt by the user at the handles. A Perform and Protect feature.
- 52 joules of impact energy provides maximum performance
- 15 amp motor provides maximum power and overload protection
- Rubber-coated handles provide greater comfort and control
Includes
- Hammer Truck
- Flat Foot Plate for Hammer Truck
- Pegged foot plate for hammer truck
- Bull Point Chisel
- 1" Cold Chisel
- 3" Wide Chisel
- Kit Box
Specifications
| Height | 22 IN |
| Length | 48 IN |
| Width | 34.375 IN |
| Weight | 155 LB |
| Type | DEMOLITION HAMMER |
| Battery Included | No |
| Voltage (V) | 120 V |
| Watt Hours | 1800 |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Primary Material | Hardened Steel and Plastics |
Features
- 13 Amp motor
- 9,000 RPM
- Anti-Rotation E-CLUTCHSystem activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor.
- Dust Ejection Systemtechnology ejects damaging dust and debris particles that enter through the air intake vents.
- Power Loss Resethelps prevent accidental restarts following a power disruption when the tool is left in the "on" position.
Specifications
| Height | 5.900 IN |
| Length | 16.875 IN |
| Width | 7.125 IN |
| Weight | 8.450 LB |
| MAXIMUM SPEED | 9000 RPM |
| WHEEL DIAMETER | 6 in |
The DEWALT DWE43113 4-1/2" - 5" high performance trigger grip Grinder is powered by a 13 amp motor and equipped with the dust Ejection system technology designed to protect the tool from damaging dust and debris that enters through air intake vents. It has a side handle for an alternative grip, along with a 5" type 27 guard. This Grinder also features a trigger switch with a 'lock-on' option the no-load speed at 9000 RPM, with inner and outer flanges. Specs: wheel diameter = 5", Spindle size = 5/8-11 inches, 1700 max watts out, tool weight = 5.1 lbs. Backed by DEWALT'S 3 year limited warranty. Includes: 1) Grinder, 1) 5" type 27 guard, 1) side handle, inner and outer flanges.
Features
- 13 Amp motor
- 5-In type 27 guard
- Dust ejection system technology to protect the tool from damaging dust and debris
- Inner and outer flanges
- Trigger switch with lock-on option
Specifications
| Height | 5.125 IN |
| Length | 19.750 IN |
| Width | 6.125 IN |
| Weight | 6.850 LB |
| MAXIMUM SPEED | 9000 RPM |
| WHEEL DIAMETER | 4.5 - 5 in |
Features
- Anti-Rotation E-CLUTCHSystem activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor.
- 11,000 RPM Rating
- 13 Amp Motor
- Dust Ejection System provides durability by ejecting damaging dust and debris particles that enter through the air intake vents.
- Power Loss Resetprevents accidental restarts following a power disruption when the tool is left in the "on" position.
Specifications
| Height | 5.125 IN |
| Length | 16.700 IN |
| Width | 6.300 IN |
| Weight | 6.950 LB |
| MAXIMUM SPEED | 11000 RPM |
| WHEEL DIAMETER | 4.5 - 5 in |
The Bosch PR20EVS Colt electronic variable-speed palm router combines power, precision and versatility in a small-sized tool. It has a 1.0 HP, 5.6 Amp motor that spins at a variable speed of 16,000 to 35,000 RPM. The variable speed dial is conveniently mounted on top of the tool body. The router features Constant Response circuitry, which maintains a consistent speed by detecting heavy loads and increasing power to maintain the selected RPM. It features soft-start circuitry, which reduces startup torque. Additionally, depth adjustment is simple; just align and lower the motor and then lock the router in position with the clamping level. Micro-fine adjustments are equally effortless, thanks to the wheel on the back of the router's base. It accepts standard 1/4 In. bits for flexibility, with an impressive max cutter diameter of 1-5/16 In. The motor housing has a palm-shaped, rubber over-molded grip that allows for comfortable operation. And the included rugged aluminum fixed base is durable, solid and precise.
Features
- Powerful 5.6 Amp motor produces 1.0-hp max. and 16,000 to 35,000 RPM
- Rugged aluminum fixed base durable, solid and precise
- Fast and precise depth adjustment system allows both macro and micro adjustment
- Unique finger support pockets for additional stability, especially when trimming edges
- Enhanced bit capacity fixed base accepts bits up to 1-5/16 In. in diameter
- Soft-start circuitry reduces start-up torque
- Constant Response circuitry monitors and maintains speed under load for consistent performance
- Versatile bit-changing system fast, easy bit changes using two wrenches or spindle lock and one wrench
- Quick-clamp system allows motor to be easily adjusted or moved from base to base
- Palm-grip design with soft grip the most comfortable router in its class
- Angled cord exit helps keep cord out of the way
- Variable speed dial for matching speed to workpiece and task
Specifications
| Adjustable Depth Stops | No |
| Amperage (A) | 5.6 |
| Bit Change Type | 1/4 In. Self-releasing collet chuck |
| CSA Certified | No |
| Case Included | No |
| Color / Finish | Blue |
| Cord Length (ft) | 10 |
| Cord Length (in) | 120 |
| Cordless / Corded | Corded |
| Depth Adjustment | Yes |
| Depth Capacity (in) | 3 |
| Dust Collection | No |
| ETL Listed | No |
| Electronic Speed Control | Yes |
| Fence Included | No |
| GTIN | 00000346471045 |
| Handle Type | Barrel |
| Height (in) | 7.5 |
| Horsepower (hp) | 1 |
| Housing Material | Metal, Plastic |
| Length (in) | 3.5 |
| Lock-on Switch | Yes |
| Maximum RPM | 16000 |
| Motor Horsepower (hp) | 1 |
| Net Tool Weight (lbs) | 3.3 |
| Plunge Lock Control | No |
| Powered Tool Power Source | Electric - Corded |
| Primary Collet Size | 1/4 Inch |
| Router Base Type | Fixed |
| Spindle Lock | Yes |
| Switch Type | Toggle on-off switch |
| Tool Storage | No Case Included |
| UL Listed | Yes |
| Variable Speed | Yes |
| Voltage | 120 |
| Voltage (V) | 120 |
| Weight (lbs) | 3.3 lb |
| Width (in) | 3.75 |
Features
- Brushless motor requires no brush changes
- Brake stops wheel in 2 seconds or less on average using DWA8914 wheel
- The electronic Kickback Brake engages with maximum force when a pinch, stall, or bind-up event is sensed, quickly stopping the wheel, reducing the movement of the grinder, and shutting off the motor
- POWER-LOSS RESET- The ON/OFF trigger switch has a no-volt release function. In the event of a power outage or other unexpected shut down, the trigger switch will need to be cycled (turned off and then on) to restart the tool
Includes
- Grinder
- Side Handle
- Hex Key
- Inner and Outer Flange
- 5 in Type 27 Guard
Specifications
| Height | 5.230 IN |
| Length | 16.890 IN |
| Width | 6.140 IN |
| Weight | 6.550 LB |
| Type | ANGLE GRINDER |
| Battery Included | No |
| Motor Type | Brushless |
| Prop 65 Generic Warning | Yes |
| Warranty | 3LW1YS90D |
| Bare Tool (Y/N) | Yes |
Offering seven cutting settings to handle a variety of wood types, our Deluxe Plate Joiner Kit boasts an industry-leading motor for powerful, dependable performance. Whether you're a professional cabinetmaker or woodworker, you'll appreciate its versatile fence and efficient design. The wood jointer kit includes a 4-inch blade for standard-size cuts and an innovative fence system with pivot point to provide accurate height readings. This plate joiner handles a wide range of joining applications and boasts an industry-best motor and adjustment knob for power and precision. For optimum control and stability during cuts, the bale handle of the wood jointer is attached to the fence rather than the motor.
Features
- 7.0 Amp, 120 V, AC only, 10,000 rpm
- 1" O.D. dust port accepts standard bag or can be connected to a vacuum
- Fence tilts from 0 to 135 with positive adjustable stop at 90
- Precise micro height-adjustment knob
Includes
- Blade(s);Dust Collection;Tool Bag;Wrench
Specifications
| Height | 7.670 IN |
| Length | 15.920 IN |
| Width | 10.250 IN |
| Weight | 11.450 LB |
| Type | FASTENERS: WOODWORKING |
| Battery Included | No |
| Voltage (V) | 120 V |
| Warranty | NLW |
| Piece Count | 6 |
| Material Group | WOOD |
Features
- The BNCE-20 is a compact and lightweight tool that has a 3-position removable side handle and a rotating trigger handle provides the operator with multiple cutting positions and increased maneuverability in tight areas.
- This amazing tool can cut a variety of materials including rebar, all-thread rod, coil rod, EMT conduit, pipe, tubing, and more.
- Cutting Edge Saws are designed to emit minimal cutting sparks and the cut material is burr-free and cool to the touch
Specifications
| Voltage | 120 |
| Hertz | 60 |
| Amps | 9 |
| Watts | 1100 |
| Blade Size | 4.375" (110 mm) |
| Blade Type | (2 ea.) Tungsten Carbide Tipped |
| Blade Number Of Teeth | 24 |
| Blade Kerf | 1.6 mm |
| No Load Rpm | 2,000 |
| Depth Of Cut | .860" (21.8 mm) |
| Construction Type | DOUBLE INSULATED |
| Cord Type | 18 AWG, 2 CORD |
| Plug Type | U.S. POLARIZED 2-PRONG |
| Cord Length | 10 ft. (3 m) |
| Tool Length | 20.3" (515 mm) |
| Tool Width | 5.5" (140 mm) |
| Tool Height | 3.9" (99 mm) |
| Net Tool Weight | 7.6 lbs. (3.5 kg) |
| ETL/UL Listed | Certified and Listed |
| Warranty | One year from date of purchase |
Features
- Next Generation 11 Amp AC/DC 11,000 rpm motor provides the best power to weight/size ratio available
- Dust Ejection System provides durability by ejecting damaging dust and debris particles that enter the tool
- Oversized brushes provides 65% longer brush life over previous model (D28402)
- Large spiral bevel gear provides long transmission life
- One-TouchGuard allows for 360-degree rotation of the guard with a single action
- Quick-Change Wheel Release allows tool free wheel removal without need for a wrench
- Top-mounted and protected spindle lock button maximizes depth of cut without compromising durability
- Uniquely small gripping surface in this power class allows for the best comfort available in this class
- Newly-designed side handle provides excellent ergonomics
- Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage
Specifications
| Height | 4.875 IN |
| Length | 15.250 IN |
| Width | 6.125 IN |
| Weight | 6.250 LB |
| MAXIMUM SPEED | 11000 RPM |
| WHEEL DIAMETER | 4.5 in |
The 11 amp 4-1/2 in. small angle grinder (Paddle, lock-on) delivers up to 3X more durability and up to 50% more power than the competition. With a 1,400 MWO motor that powers through the toughest jobs, the 6141-30 is the perfect match for industrial users. A grip circumference measuring a full 2 in. less than the competition, this Milwaukee grinder provides more control and less fatigue throughout the day. Featuring a 100% tool-free design, this grinder allows the user to change all accessories, including hubbed product, without a wrench. in addition, the tool-free, burst resistant, adjustable guard allows users to make quick guard installations and adjustments.
Features
- Powerful 11 Amp, 11,000 RPM motor - provides maximum performance and durability
- Slim paddle design for increased control and reduced user fatigue
- Tool-free accessory change - easily change all accessories without a wrench
- Tool-free adjustable guard - provides quick guard installations and adjustments
- Advanced airflow system - maximizes airflow and reduces debris ingress, improving motor life and performance
- Debris baffles protect internal components by deflecting damaging debris out of the airflow at the intake vents
- Compatible with multiple grinder guards and flanges. see cross-reference guide below.
Specifications
| Powered Tool Power Source | Electric - Corded |
| Cordless / Corded | Corded |
| Grinder Type | Angle |
| Maximum RPM | 12000.0 |
| Amperage (A) | 11.0 |
| Voltage (V) | 120.0 |
| Arbor Size | 5/8 -11 UNC |
| Length | 13.8 Inches |
| Variable Speed | Yes |
| Side Handle | Yes |
| Lock-on Switch | Yes |
| Product Storage Included | No Case Included |
| Color / Finish | Red/Gray/Black |
| Housing Material | Plastic, Metal |
| Cord Length (ft) | 8.0 |
| Grinder Switch Type | Paddle |
| Adjustable Handle Position | No |
| Grinding Wheel Included | No |
| Wheel Diameter (in) | 4.5 |
| Handle Type | Straight |
| Overload Protection | No |
| Replaceable Brushes | No |
| Spindle Lock | Yes |
| Net Tool Weight (lbs) | 5.46 |
| Accessories Included | Yes |
| Included Accessories | Type 27 Guard, Spanner Wrench, Side Handle, Flange |
| Included Safety Features | Debris Baffles |
| Electronic Speed Control | No |
| UL Listed | Yes |
| CSA Certified | No |
| ETL Listed | No |
| Package Contents | Grinder, Guard, Wrench, Side Handle, Flange |
Features
- High power 4.7 HP (maximum motor HP) 6,500 rpm motor provides overload protection provides higher operating speeds under load
- Dust Ejection Systemincreases brush life and protects the motor from damaging particles entering the air intake that would otherwise abrade the motor
- Anti-vibe trigger handle reduces user fatigue caused by vibration
- Lightweight design (12.1 lbs) lessens user fatigue
- Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage
- Low-profile gearcase allows for work in tight areas
- 6,500 rpm provides optimal material removal with 9" grinding wheels
- Brush window allows for quick brush replacement
- Quick-Changeguard allows user to quickly adjust guard to redirect sparks
- Soft-grip trigger handle provides greater comfort and control
Specifications
| Height | 9.843 IN |
| Length | 23.900 IN |
| Width | 5.200 IN |
| Weight | 15.200 LB |
| MAXIMUM SPEED | 8000 RPM |
| WHEEL DIAMETER | 9 in |
Features
- High power 4.7 HP (maximum motor HP) 8,500 rpm motor provides overload protection provides higher operating speeds under load
- Dust Ejection Systemprotects the motor from damaging particles entering air intake that would otherwise abrade the motor and increases brush life
- Anti-vibe trigger handle reduces user fatigue caused by vibration
- Lightweight design (11.6 lbs) lessens user fatigue
- Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage
- Low-profile gearcase allows for work in tight areas
- 8,500 rpm provides optimal material removal with 7" grinding wheels
- Brush door allows for quick brush replacement
- Quick-Changeguard allows user to quickly adjust guard to redirect sparks
- Soft-grip trigger handle provides greater comfort and control
Specifications
| Height | 10.000 IN |
| Length | 23.950 IN |
| Width | 5.050 IN |
| Weight | 14.350 LB |
| MAXIMUM SPEED | 8500 RPM |
| WHEEL DIAMETER | 7 in |
Model HR2811F is a versatile, high-powered rotary hammer with an L-shape design ideal for horizontal work. The hammer accepts SDS-PLUS bits, and is powered by a 6.7 AMP variable speed motor delivering 2.7 Joules of impact energy. The HR2811F features 3-mode operation for "rotation only", "hammering with rotation", or "hammering only" for multiple applications, with 0-1,100 RPM and 0-4,500 BPM. The torque limiting clutch prevents gear damage by automatically disengaging gears if the bit binds. The HR2475 has an LED light for improved illumination of the work surface. Makita rotary hammers are engineered with the Makita Motor Advantage, which features field core interlocking steel laminations, dual ball bearing armature, and more copper commutator bars. These engineering points-of-difference increase the energy transfer efficiency for more power and longer tool life.
Features
- Powerful 7.0 AMP motor delivers 2.1 ft.lbs. of impact energy to handle the most demanding applications
- Vibration-absorbing back handle for operator comfort
- L.E.D. light illuminates drilling surface for more productivity in low light applications
- 3-mode operation for "Rotation Only", "Hammering with Rotation" or "Hammering Only"
- No hammering when idling" function helps increase tool life
- Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
- Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
- One-touch sliding chuck for quick bit changes
- Recessed lock-on button for continuous operation
- Extended life brushes for more work between service intervals and less downtime
- Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
Includes
- (1) Depth Gauge (324219-0)
- (1) Plastic Tool Case (824789-4)
- (1) Side Handle (154842-5)
Specifications
| AMPS | 7 |
| Max. Capacity (concrete drilling) | 1-1/8" |
| Optimum Range (concrete drilling) | 1/4" - 5/8" |
| Max. Capacity (concrete drilling w/ core bit) | 3-1/8" |
| Impact Energy (ft.lbs.) | 2.1 |
| Impact Energy (Joules) | 2.9 J |
| Blows Per Minute (variable speed) | 0 - 4,500 BPM |
| No Load Speed (variable speed) | 0 - 1,100 RPM |
| Vibration Control | No |
| Vibration (m/s²) | 15 |
| Overall Length | 12-5/8" |
| Cord Length (ft) | 8.2' |
| Net Weight | 7.7 lbs. |
| Bit Type | Accepts SDS-PLUS |
| Power Type | Corded |
| Bind-Up Control | No |
| Shipping Weight | 17.64 lbs. |
Features
- High power 4 HP (maximum motor HP) 8,500 rpm motor with overload protection provides higher operating speeds under load
- Epoxy coated field and armature provide long service life against abrasion from airborne debris
- Low-profile gearcase allows for work in tight areas
- Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage
- 2-position side handle provides improved ergonomics for specific applications
- 8,500 rpm provides optimal material removal with 7" grinding wheels
- Brush window allows for quick brush replacement
- This product runs off of AC/DC power
Specifications
| Height | 5.100 IN |
| Length | 22.200 IN |
| Width | 8.000 IN |
| Weight | 12.900 LB |
| MAXIMUM SPEED | 8500 RPM |
| WHEEL DIAMETER | 7 in |
Features
- 3/4 HP induction motor provides superior power for industrial grinding applications
- Rugged cast iron base and motor housing provide durability and prolonged life
- Motor runs at 3,600 rpm for high-speed material removal
- Precision-machined aluminum tool rests allow the user to accurately position work
- Rear exhaust ports in wheel guards for smoother operation
- 12-1/2" distance between wheels for larger and longer grinding applications
Specifications
| Height | 11.73 IN |
| Length | 17.75 IN |
| Width | 12.625 IN |
| Weight | 35.1 LB |
| MAXIMUM SPEED | 3600 RPM |
| WHEEL DIAMETER | 8 in |
Features
- 4.2 amp, 25,000 rpm motor provides high power and speed for all 1-1/2" grinding applications
- AC/DC capacity works off welding machines and generators for increased productivity and versatility
- Convenient paddle switch with lock-on button for easy gripping
- Precision 1/4" collet securely holds all proper accessories (1/8" reducing sleeve as optional accessory)
- This product runs off of AC/DC power
Specifications
| Height | 3.740 IN |
| Length | 17.720 IN |
| Width | 4.500 IN |
| Weight | 4.740 LB |
| MAXIMUM SPEED | 25000 RPM |
| WHEEL DIAMETER | 1.5 in |
Features
- 1-3/4 HP (maximum motor HP), 11.0 amp motor provides the power to rout smoothly through the toughest hardwoods
- Micro-fine depth adjustment ring provides precise depth adjustments in 1/64" increments and adjusts vertically for a constant switch/cordset location
- Adjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-locking
- Quick release motor latches for fast and easy motor pack removal for bit and base changes
- Detachable cordset offers cordset serviceability and removes the need for a "shorty" cord motor pack
- Sub-base concentricity gauge included to ensure bit concentricity for best-in-class accuracy
- Clear, LEXAN sub-base provides enhanced base durability, bit visibility, and accepts standard template guide bushings
- Rubber overmolded handles and low center of gravity design provide best-in-class comfort, balance, and control
- Dust-Sealed Switch protects against dust ingestion for longer switch life
- Heavy-duty, precision machined, die-cast aluminum base and motor housing for durability and low tool weight
Specifications
| Height | 7.250 IN |
| Length | 10.750 IN |
| Width | 9.600 IN |
| Weight | 10.000 LB |
| MAXIMUM SPEED | 0 RPM |
Variable speed control with soft starting motor features full time electronic feedback that maintains motor speed through the cut. Dual LED's and clear sub base ensure maximum visibility, adjustment ring enables controlled bit depth changes, large, low-pressure spindle lock button, multiple shaft lock detents, depth ring, clamping mechanism and spring loaded release tabs. Specs: 7.0 amps, 16,000-27,000 RPM no load speed, 1/4 collet diameter, 1.5 plunge stroke, 4 base dimension, 12 position spindle lock, weighs 4.1 lbs. Includes: motor, standard base, wrench and instruction manual.Plunge base incorporates fine-tune adjustment rod for precise depth setting. Aluminum motor housing and base construction provides long term durability
Features
- Durable 1.25HP motor delivers the power to meet the toughest applications
- Variable speed control feature enables bit speed to be optimized for changing applications
- Soft-starting motor features full-time electronic feedback that maintains motor speed through the cut
- Dual LED's and clear sub-base ensure maximum visibility in operation
- Adjustment ring enables controlled bit depth changes to within 1/64 in.
- Large, low-pressure spindle lock button allows for comfortable, single wrench bit changes
- Multiple shaft-lock detents enable quick and simple bit changes
- Depth ring and clamping mechanism combine to ensure motor remains locked in position
- Spring-loaded release tabs allow for quick base removal
- Allows up to 1.5 in. of depth travel with standard base
Specifications
| Height | 6 IN |
| Length | 10.625 IN |
| Width | 7.125 IN |
| Weight | 4.1 LB |
| MAXIMUM SPEED | 27000 RPM |
Features
- For clean and precise work in keystone plate, deck plate and other sheet materials
- Slim and ergonomic body design for easy gripping
- Die rotates 360°; large 1/4" stroke
- Extremely light (weighs only 3.6 lbs.) for easier handling
- Small circumference barrel grip design
- Lock-on sliding switch for continuous operation
- Built-in thickness gauge for convenience
- Easy punch and die replacement for reduced down time
- Externally accessible carbon brushes for greater serviceability
- Double insulated
Includes
- (1) Spanner Wrench (781028-4)
- (1) Blade Wrench (783208-8)
Specifications
| Capacity (aluminum, ga.) | 10 ga. |
| Capacity (mild steel, ga.) | 16 ga. |
| Capacity (stainless, ga.) | 18 ga. |
| Cutting Radius (inner edge) | 1-3/4" |
| Cutting Radius (outer edge) | 2" |
| Strokes Per Minute | 2,200 SPM |
| AMPS | 5 |
| Overall Length | 10-1/4" |
| Net Weight | 3.6 lbs. |
| Power Type | Corded |
| Shipping Weight | 5.28 lbs. |
This 5-inch / 6-inch Brushless Small Angle Grinder Tool, Rat Tail with Kickback Brake, No Lock-On features a brushless motor so you never need to spend time and money servicing it for brush replacements. It has a brake and key PERFORM & PROTECT features including Kickback Brake, E-CLUTCH, and LANYARD READY attachment points. This hand grinder is built for the long haul in relentless jobsite conditions.
Features
- Brushless motor requires no brush changes
- Brake stops wheel in 1 second or less on average using DW8824 wheel
- The electronic Kickback Brake engages with maximum force when a pinch, stall, or bind-up event is sensed, quickly stopping the wheel, reducing the movement of the grinder, and shutting off the motor
- POWER-LOSS RESET- The ON/OFF trigger switch has a no-volt release function. In the event of a power outage or other unexpected shut down, the trigger switch will need to be cycled (turned off and then on) to restart the tool
- LANYARD READYintegrated lanyard attachment point (Lanyard not included)
- 2-stage trigger requires two actions to activate tool
Specifications
| Height | 5.550 IN |
| Length | 23.000 IN |
| Width | 8.500 IN |
| Weight | 8.500 LB |
| MAXIMUM SPEED | 9000 RPM |
| WHEEL DIAMETER | 6 in |
Features
- Powerful 13 Amp motor
- Tool free adjustment - cutter to twist bit
- Optimized cutting & drilling speeds
- Tool free motor head adjustment
- 3/4 in. Weldon quick change Arbor
- 2 Speed gear box - 475/730 RPM
- Auto-stop lift-off detection
- Tool free feed-handle
- LED light
Specifications
| Color / Finish | Red/Black |
| Length | 11.25 Inches |
| Width | 7.5 Inches |
| Height | 15.5 Inches |
| Net Tool Weight (lbs) | 30.0 |
| Drill Press Type | Portable |
| Speed Range High (rpm) | 730.000000 |
| Speed Range Low (rpm) | 470.000000 |
| Spindle Travel (in) | 5.750000 |
| Chuck Design | Keyless |
| Chuck Key Storage | No |
| Integrated Laser Guide | No |
| Speeds | 2 |
| Table Material | Steel |
| Amperage (A) | 13.0 |
| Voltage | 120 Volts |
| Chuck Capacity | 3/4 IN Weldon |
| 360° Swivel | No |
| CSA Certified | Yes |
| ETL Listed | Yes |
| UL Listed | Yes |
Features
- Next generation 11 amp AC/DC 11,000 rpm motor provides the best power to weight/size ratio available
- Dust Ejection System provides durability by ejecting damaging dust and debris particles that enter the tool
- Over-sized brushes provide 2 times the brush life of the previous model (D28402)
- Large spiral bevel gear provides long transmission life
- One-TouchGuard allows for 360-degree rotation of the guard with a single action
- Quick-Change wheel release allows tool-free wheel removal without need for a wrench
- Top-mounted and protected spindle lock button maximizes depth-of-cut without compromising durability
- Uniquely small gripping surface in this power class allows for the best comfort available in this class
- Newly designed side handle provides excellent ergonomics
- Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage
Specifications
| Height | 4.875 IN |
| Length | 15.250 IN |
| Width | 6.125 IN |
| Weight | 6.350 LB |
| MAXIMUM SPEED | 11000 RPM |
| WHEEL DIAMETER | 4.5 in |
Features
- 13 Amp motor
- 9,000 RPM
- Anti-Rotation E-CLUTCHSystem activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor.
- Dust Ejection Systemtechnology ejects damaging dust and debris particles that enter through the air intake vents.
- Power Loss Resethelps prevent accidental restarts following a power disruption when the tool is left in the "on" position.
Specifications
| Height | 5.125 IN |
| Length | 19.750 IN |
| Width | 6.125 IN |
| Weight | 8.950 LB |
| MAXIMUM SPEED | 9000 RPM |
| WHEEL DIAMETER | 6 in |
