Cordless Staple Guns
A cordless staple gun is perfect for anyone who wants to get the job done quickly and easily - without being weighed down by electric cords or pneumatic lines. Manual staple guns are tiring if used on big projects and it's hard to drive the staples consistently. The solution is a battery staple gun from Kinnunen. So, whether you're working on a home improvement project or need a battery-operated staple gun for commercial use, Kinnunen has the best selection to choose from.We have trained product specialists available to answer your questions and help you select the right cordless staple gun for your needs. Call us today at 1-800-432-8979 or fill out our contact form. We are here to help you get the job done right.
The MILWAUKEE® M12 Cable Stapler delivers unmatched stapling performance in the most compact battery-powered solution leading to a faster, more efficient rough-in process. The compact, lightweight design provides users with access to tight stud bays and improved ergonomics when stapling overhead or during difficult-to-reach situations. Moveable cable guides ensure proper alignment and the coil-spring mechanism consistently sinks the staples to the appropriate depth when fastening NM-B Sheathed Cable (14, 12, 10 AWG) and low voltage cables, supporting peak stapling productivity. Only compatible with the Milwaukee 1" insulated staples (sold separately), the M12 Cable Stapler gives the user the run-time needed to sink up to 1,200 staples on a fully charged M12 CP2.0ah battery.
Features
- Coil-spring mechanism consistently sinks the staples to the appropriate depth
- Compact size eliminates the majority of manual staple installation needed for NM-B and low voltage cables
- Improves speed of staple installation, completing rough-ins 2x faster than when using a hammer
- Moveable Cable Guides
- Staple Viewing Window
- Battery Fuel Gauge
- Reversible Belt Hook
- LED Work Light
- Dry Fire Lock Out
- Two-Finger Trigger
- Compatible with Milwaukee 1" Insulated Cable Staples
- 45 Staple Magazine Capacity
- Fires 1,200 Staples Per Charged M12™ CP2.0 Battery
- Part of the M12™ system, featuring over 100+ tools
- Fits All M12™ Batteries
Specifications
| Battery System | M12™ |
| Color Finish | Red |
| Depth | 6.5 Inches |
| FUEL | No |
| Handle Type | Barrel Grip |
| Material | Metal |
| Motor Type | Brushed |
| Nailer Type | Stapler |
| ONE-KEY Enabled | No |
| Power Source | Cordless |
| Power Tool Branding | Brushed |
| Voltage | 12 |
| Weight - Battery Installed (lb) | 5 |
The DEWALT 20V MAX Cordless Cable Stapler is built for residential wiring applications, primarily fastening Romex brand wires and cables. Made in the USA with global materials, this stapler has a proprietary cable guide that helps to drive staples over cable. The compact frame and lightweight design are ideal for tight spaces. A center-mounted LED light helps to eliminate shadows and illuminate the work area in low light conditions. Compatible with DEWALT DRS18100 1" insulated cable staples (sold separately).
Features
- Proprietary cable guide to line up shots
- Center-mounted LED for workplace illumination
- Extended trigger provides easy use in multiple orientations
- Adjustable belt hook for left or right attachment depending on user preference
- Made in the USA with global materials
- Compatible with DEWALT DRS18100 1" Insulated Cable Staples (sold separately)
- Compatible with all DEWALT 20V MAX batteries
Includes
- (1) Charger | (1) Manual | (1) Soft kit bag | (1) Belt clip | (1) Staple holder for DRS18100 staples | (1) DCB203 20V MAX* 2.0Ah Battery
Specifications
| Height | 9.625 in |
| Length | 19.680 in |
| Width | 4.563 in |
| Weight | 8.300 lbs |
| Product Type | STAPLER |
| Cordless Vs. Corded | Cordless |
| Motor Type | Brushless |
| Voltage | 20 V V |
| Battery Included | Yes |
| Battery Type | 20V MAX Lithium Ion |
| Battery Qty | 1 |
| Battery Weight | 0.8 |
| Battery Amp Hours | 2 Ah Ah |
| Watt Hours | 40 |
| Net Lit-Ion Y/N | Yes |
| Charger Included | Yes |
| Charger Type | Wall Mountable Charging Base |
| Battery Required | Yes |
| Charge Time | 60 |
| Number Of Batteries Required | 1 |
| Rechargeable | Yes |
| Warranty | 3LW1YS90D |
| Bare Tool | No |
| Crown Size | 1 in In |
| Engine | Brushless |
| Fastener Length | 1 IN |
| Firing Mode | Contact |
| Housing Material | Plastic |
| Kit | Yes |
| Maximum Fastener Size | 1 in |
| Minimum Fastener Size | 1 in |
| Multi-Purpose | Single Purpose |
| Nailer Features | No Features |
The MILWAUKEE® M18 FUEL™ 18GA ¼" Narrow Crown Stapler delivers peak productivity, providing unmatched stapling performance without the hassle of a compressor and hose. The Narrow Crown Stapler uses a nitrogen air spring for the power to consistently sink staples to the proper depth in hard materials with the ability to adjust to drive staples in soft materials without blowing through. The combination of a POWERSTATE™ Brushless Motor and REDLINK PLUS™ Intelligence provides an unmatched fire rate with zero ramp-up time, for maximum efficiency throughout the day. This battery powered narrow crown stapler is compact and lightweight, to provide better access into tight spaces and limit fatigue. The MILWAUKEE® M18 FUEL™ 18GA ¼" Narrow Crown Stapler delivers the pneumatic performance that professional carpenters and remodelers expect with the freedom and convenience of a cordless tool.
Features
- Dry Fire Lockout
- Tool Free Depth Adjustment
- Reversible Belt Hook
- (2) Interchangeable, Non-Marring, Precision Point Tips Included
- On/Off Power Button
- Sequential and contact actuation firing modes
Specifications
| Badge Branding | FUEL™ |
| Battery System | M18™ |
| Color Finish | Black;Red |
| Depth | 11 Inches |
| FUEL | Yes |
| Material | Metal |
| Nailer Type | Stapler |
| Number of Batteries Required | 1 |
| Power Source | Cordless |
| Power Tool Branding | FUEL™ |
| Voltage | 18 |
| Weight - Battery Installed (lb) | 6.9 |
| Weight Excluding Battery (lb) | 5.4 |
The DEWALT DCN681 18 Gauge Narrow Crown Stapler drives 18 Gauge 1/4 in narrow crown staples from 1/2 in to 1-1/2 in which makes it ideal for cabinetry, furniture, paneling, and flooring underlayment. With its brushless motor powered by a DEWALT 20V MAX Lithium-Ion battery the DCN681 is ready to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. Battery & Charger Sold Separately
Features
- 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Brushless motor maximizes runtime and durability
- Tool-free selectable trigger for sequential or contact actuation modes
- Tool-free depth adjustment for precise countersinking of staples
- Low nail lockout prevents dry firing and unwanted marks on the work material
- Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
- Integrated tool-free stall release lever to quickly reset the driver blade in the event of a stall
- Adjustable belt hook for left or right attachment depending on user preference
- Bottom Load magazine for easy loading and removal of jammed fasteners
- Compatible with all DEWALT 20V MAX batteries
Includes
- (1) DCN681 - Narrow Crown Stapler
Specifications
| Height | 4.490 in |
| Length | 12.615 in |
| Width | 11.970 in |
| Weight | 6.700 lbs |
| Product Type | CROWN STAPLER |
| Product Finish | Yellow/Black |
| Cordless Vs. Corded | Cordless |
| Motor Type | Brushless |
| Voltage | 20 V V |
| Battery Included | No |
| Battery Type | 20V MAX Lithium Ion |
| Charger Included | No |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Warranty | 3LW1YS90D |
| Bare Tool | Yes |
| Crown Size | 1/2" to 1-1/2 In |
| Engine | Brushless |
| Fastener Length | 1/2" to 1-1/2 |
| Firing Mode | Full Sequential |
| Housing Material | Plastic |
| Maximum Fastener Size | 1-1/2 in |
| Minimum Fastener Size | 1/2 in |
| Multi-Purpose | Single Purpose |
| Nailer Features | No Features |
| Range | 18 gauge |