Cordless Caulk Guns
Cordless caulk guns are designed to provide smooth operation and place less stress on your hands so you can get the job done quickly and easily. Our battery-powered caulking guns accept standard sized tubes, so you can use them with any type of caulk or sealant, including heavy adhesives and epoxies. If you use the same brand as your other cordless tools, you already have a battery! Let our battery caulk guns do the work and give your wrist a break. ÂWe have trained product specialists available to answer your questions and help you choose the best cordless caulk gun for your application. Call us today at 1-800-432-8979 or fill out our contact form. We are here to help you get the job done right.
The heavy duty® metal gear box delivers an industry leading 950 lbs of pushing force for the highest viscosity materials. The M18™ adhesive gun kit offers both a remote speed dial and a variable speed trigger that optimizes the user's control over bead and flow rate. Milwaukee's industry leading motor and electronics technologies have created a new constant flow technology that allows for a steady flow rate at 0-21 ipm throughout use of the adhesive gun. The anti drip clutch instantly stops material from expelling after trigger releases and saves the user time and money avoiding a messy clean-up. A rotating quick change collar increases the ease of use and the ability to change out adhesives quickly and without clean-up. The 2641-20 accepts all Milwaukee® quick change front ends and all M18™ batteries. The Milwaukee® REDLITHIUM™ batteries increase run time allowing a user to dispense over 200 tubes of general construction material on a single battery charge.
Features
- Up to 950 lbs of force for dispensing high viscosity materials
- Constant flow technology creates a steady flow rate results in even beads
- Remote speed dial and variable speed trigger allows for maximum bead control
- REDLITHIUM™ battery technology dispenses over 200 tubes of general construction material on a single battery charge
Specifications
| Powered Tool Power Source | Electric - Cordless |
| Cordless / Corded | Cordless |
| Variable Speed | Yes |
| Maximum Speed (in/min) | 21.0 |
| Maximum Force | 950.0 lbs |
| Color / Finish | Red with black over-mold and black barrel |
| Seal Puncture Tool | No |
| Spout Cutter | No |
| Capacity | 10 |
| Variable Pressure Control | Yes |
| Cartridge Type | 10 oz |
| Ladder Hook | No |
| Net Tool Weight | 4.9 lbs |
| Number of Batteries Required | 1 |
| Battery Composition | Lithium-Ion (Li-ion) |
| Battery Size | Battery Packs |
| Battery Voltage (V) | 18 |
| Charger Included | No |
| Charge Time | 0.5 hrs |
| CSA Certified | No |
| ETL Listed | No |
| UL Listed | No |
| Package Quantity | 1 |
The DEWALT DCE570B 20v MAX 29oz Adhesive Gun, Baretool offers the user a variable speed trigger which allows for increased control over the flow of your adhesive. It also has a variable speed dial that allow for setting maximum and minimum flow rates. This gun has an anti - drip feature that automatically retracts the plunging rod once trigger is released preventing excess adhesive from dripping out and making a mess on your project. A Quick Connect inter-changeable canister trays allows user to quickly change between canister sizes. Capacity 29oz, Speed 21 in/min. This is a bare tool item - battery sold separately. Includes: 1) DCE560 Adhesive Gun.
Features
- Variable Speed Trigger allows for increased control over the flow of your adhesive
- Variable Speed Dial allow for setting maximum and minimum flow rates
- Anti - Drip Feature automatically retracts the plunging rod once trigger is released preventing excess adhesive from dripping out
- Quick Connect Inter-changeable canister trays allows user to quickly change between canister sizes
- LED light assists users with visibility in low light situations
- Hang hook allows for easy storage when not in use
- Made in the USA with global materials
Specifications
| Length | 26.69 in |
| Width | 4 in |
| Height | 11.52 in |
| Weight | 6.25 lbs |
| Power Source | Electric |
| Cordless Vs. Corded | Cordless |
| Motor Type | Brushed |
| Voltage | 20 V V |
| Battery Included | No |
| Battery Type | 20V MAX Lithium Ion |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | Yes |
| Charger Included | No |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Disclaimer | Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
| Prop 65 Generic Warning | No |
| Warranty | 3LW1YS90D |
| Certifications Or Listings | UL Listed |
| Claims Needed | Yes |
| Bare Tool | Yes |
| Engine | Brushed |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Kit | No |
| Max Speed | 21 In/Min |
| Variable Speed | Yes |
| Product Finish | Yellow/Black |
Features
- Up to 400 lbs of pushing force
- Variable speed trigger and max speed dial for complete control
- 0-28 IPM dispensing rate
- Interchangeable quick-change carriage design for converting material types
Specifications
| Powered Tool Power Source | Electric - Cordless |
| Cordless / Corded | Cordless |
| Variable Speed | Yes |
| Maximum Speed (in/min) | 28.0 |
| Minimum Speed (in/min) | 1.0 |
| Maximum Force | 400.0 lbs |
| Color / Finish | Red/Black |
| Seal Puncture Tool | No |
| Spout Cutter | No |
| Capacity | 10 oz |
| Variable Pressure Control | Yes |
| Cartridge Type | 10 oz Cartridge Style |
| Ladder Hook | Yes |
| Net Tool Weight | 4.5 lbs |
| Number of Batteries Required | 1 |
| Battery Composition | Lithium-Ion (Li-ion) |
| Battery Size | Battery Packs |
| Battery Ampere-hour (Ah) | 1.5 |
| Battery Voltage (V) | 12 |
| Charger Included | No |
| Charge Time | 0.5 hrs |
| CSA Certified | Yes |
| ETL Listed | Yes |
| UL Listed | Yes |
| Package Quantity | 1 |
The DEWALT DCE560D1 20V MAX 10oz/300ml Adhesive Gun Kit offers the user a variable speed trigger which allows for increased control over the flow of your adhesive. It also has a variable speed dial that allow for setting maximum and minimum flow rates. This gun has an anti - drip feature that automatically retracts the plunging rod once trigger is released preventing excess adhesive from dripping out and making a mess on your project. A Quick Connect inter-changeable canister trays allows user to quickly change between canister sizes. Capacity: 10oz, Speed: 21 in/min. Includes: 1) DCE560 Adhesive Gun, 1) Lithium Ion Battery, 1) Charger.
Features
- Variable Speed Trigger allows for increased control over the flow of your adhesive
- Speed Dial allow for setting maximum and minimum flow rates
- Anti - Drip Feature automatically retracts the plunging rod once trigger is released preventing excess adhesive from dripping out
- Quick Connect Inter-changeable canister trays allows user to quickly change between canister sizes
- LED light assists users with visibility in low light situations
- Hang hook allows for easy storage when not in use
- Made in the USA with global materials
Specifications
| Length | 21.13 in |
| Width | 3.5 in |
| Height | 11.52 in |
| Weight | 7.15 lbs |
| Power Source | Electric |
| Cordless Vs. Corded | Cordless |
| Motor Type | Brushed |
| Voltage | 20 V V |
| Battery Included | Yes |
| Battery Type | 20V MAX Lithium Ion |
| Battery Qty | 1 |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Battery Amp Hours | 2 Ah Ah |
| Watt Hours | 40 |
| Net Lit-Ion Y/N | Yes |
| Charger Included | Yes |
| Charger Type | Charging Base |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Disclaimer | Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. |
| Warranty | 3LW1YS90D |
| Certifications Or Listings | UL Listed |
| Claims Needed | Yes |
| Hazmat Code | A1 |
| Bare Tool | No |
| Individual Vs. Set (Syndigo) | SET |
| Kit | No |