S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Concrete Tools
As a concrete professional, you know the value of having the proper tools on the job site when you need them. Once it's poured, you have a limited time to work with it. Kinnunen carries a wide selection of the most popular tools and power equipment that will help you turn loose concrete into finished walls, sidewalks and patios.Our customer service professionals receive the best industry training available. So, if you need help choosing the right concrete tool for your next project, simply call us at 1-800-432-8979 or fill out our contact form. We are here to help you get the job done right.
The 14" STIHL TS 700 cut-off machine is the powerhouse of the STIHL line. Designed for superior handling during the toughest jobs, this machine features a powerful, high-speed engine, large fuel capacity, five-point dual element vibration control system built right into the handle, and a semi-automatic belt tensioner with an innovative ribbed belt. Its X2 filtration system is low maintenance and cleans airflow with nearly 100 percent efficiency, reducing downtime for filter maintenance. Each component on this machine was meticulously engineered with demanding professionals in mind. NOTE: Abrasive wheel included. Diamond wheel (shown) sold separately.
Features
- The STIHL Inc. "Caring for Nature" seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines "low exhaust emissions" as being cleaner than EPA and/or CARB exhaust emission standards.
- The decompression valve reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope.
- The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine's correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the "dirty" side of the air box.
- The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency.
- Includes retainer for easy use, even with gloves on.
- With consistent semi-automatic re-tensioning, this feature increases the service life of the belts and shaft bearings.
- STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
- The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
- The ergonomic top-handle bar design provides an optimal comfortable grip in any working position.
Specifications
| Engine Speed | 9,300 rpm |
| Maximum Cutting Depth | 4.9" |
| Maximum Wheel Size | 14" |
| Maximum Spindle Speed | 5,350 rpm |
| Engine Power | 6.7 bhp |
| Displacement | 98.5 cc |
| Power Source | Gas |
| Arbor Size | .787 in. |
| Weight | 25.6 lbs. |
| Fuel Capacity | 40.6 oz. |
Item#:
TS-700-14
Manufacturer Item:
TS-700-14
Your Price:
1979.99
Each
The TS 420 is so popular, it could possibly be called "the standard" to which other cut-off machines are compared. Users like it because it is compact, lightweight, reliable and proves itself day in and day out, all day long. The TS 420 features all the high-performance features of the TS 410 including an X2 air filtration system for a clean and smooth-running engine and virtually maintenance-free filters. With the added benefit of a 14" cutting wheel, it will handle cuts up to 4.9 inches in depth. This cut-off machine backs up its larger cutting capacity with a ton of usability features. NOTE: Abrasive wheel included. Diamond wheel (shown) sold separately.
Features
- The STIHL Inc. "Caring for Nature" seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines "low exhaust emissions" as being cleaner than EPA and/or CARB exhaust emission standards.
- The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine's correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the "dirty" side of the air box.
- The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency.
- Includes retainer for easy use, even with gloves on.
- With consistent semi-automatic re-tensioning, this feature increases the service life of the belts and shaft bearings.
- STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
- The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
- The ergonomic top-handle bar design provides an optimal comfortable grip in any working position.
- Water connection with shut-off valve and quick connector.
Specifications
| Engine Speed | 9,000 rpm |
| Maximum Cutting Depth | 4.9" |
| Maximum Spindle Speed | 5,350 rpm |
| Maximum Wheel Size | 14" |
| Engine Power | 4.4 bhp |
| Displacement | 66.7 cc |
| Power Source | Gas |
| Arbor Size | .787 in. |
| Weight | 21.2 lbs. |
| Fuel Capacity | 24 oz. |
Item#:
TS-420
Manufacturer Item:
TS-420
Your Price:
1459.99
Each
Specifications
| Height | 0.75 |
| Length | 20 |
| Width | 4 |
| Weight | 0.6 |
| Marketing Series | S550 Professional™ |
Item#:
3976
Manufacturer Item:
3976
Your Price:
15.99
Each
Features
- Ideal for cutting a variety of wall and floor tile
- Can be used to dry or wet cut
- For use with Milwaukee M12 FUEL 3 in. cut off tool (2522)
- Includes (1) diamond tile blade
- 3/8 in. Arbor hole size
- Maximum 20,000 RPM
Specifications
| Blade Diameter | 3 in |
| Blade Thickness | 0.04 in |
| Arbor Size | 0.375 in |
| Blade Material | Diamond |
| Material Cut | Tile |
| Maximum RPM | 20000 |
| Package Contents | (1) Diamond Tile Blade |
| Set / Individual | Individual |
| Net Tool Weight | 0.09 lbs |
| 7/8 inch Diamond Arbor Knockout | No |
| Rim Type | Continuous |
| Brand / Model Compatibility | 2522-20 |
Item#:
49-94-3010
Manufacturer Item:
49-94-3010
Your Price:
13.99
Each
Features
- Ready to use concrete patch
- Repairs cracks and breaks in concrete and masonry
- Interior & exterior use
- Durable and non-shrinking
- Can be used to spot level
Specifications
| Height | 7.63 in |
| Width | 7.63 in |
| Depth | 7.63 in |
| Weight | 15.7 lbs |
| Color | Gray |
| Size | 1 Gal |
| Shelf Life | 12 Months |
Item#:
6150007
Manufacturer Item:
6150007
Your Price:
30.85
Each
Features
- Up to 75X the life vs. Milwaukee standard bonded abrasives
- Cuts more steel - high grade diamond grit outperforms and outlasts bonded abrasives
- Maintains diameter - steel core ensures consistent cutting depth
- Minimizes debris - solid steel body will not disintegrate during cutting
Specifications
| Blade Diameter | 4 1/2 in |
| Blade Thickness | 0.050000 in |
| Arbor Size | 0.625 in |
| Blade Material | Alloy Steel |
| Material Cut | Metal |
| Maximum RPM | 13300.0 |
| Package Contents | (1) 4-1/2" STEELHEAD Diamond Cut-Off Blade |
| Set / Individual | Individual |
| Net Tool Weight | 0.25 lbs |
| 7/8 inch Diamond Arbor Knockout | No |
| Rim Type | Segmented |
| Brand / Model Compatibility | Universal |
Item#:
49-93-7805
Manufacturer Item:
49-93-7805
Your Price:
22.59
Each
Specifications
| Height | 5.5 |
| Length | 66.5 |
| Width | 4.75 |
| Weight | 3.2 |
| Warranty | Limited Lifetime |
| Marketing Series | S550 Professional™ |
Item#:
73132
Manufacturer Item:
73132
Your Price:
48.89
Each
Features
- Made to last
- Made for even the most meticulous professional
- Highest quality material available
Item#:
2148-H
Manufacturer Item:
2148-H
Your Price:
63.49
Each
Features
- Dual segment technology provides smoother blade cutting surface and reduced wear of segments
- Reduced angle of contact reduces the vibration and wear allowing faster cutting
- Arrow shaped gullets generate a stronger airflow for faster removal of particles; extending blade life
- Trapezoidal segment shape provides constant surface contact when in use allowing more dedicated cutting power
Applications
- Cutting
Specifications
| Diameter | 14 in. |
| Dry/wet/both | Dry |
| Attachment process | Laser |
| Number of segments | 36 |
| Segment height | 0.327 In. |
| Arbor hole | 1 In.-20 mm |
| Max Operating Speed RPM | 5460 |
| Segment thickness | 0.125 In. |
Item#:
70184684292
Manufacturer Item:
70184684292
Your Price:
418.59
Each
Our team of experts is continually trained for the most up-to-date technology available on the field. So, If you have any questions about what cordless power tool would work best for your application, we have an answer. Simply call us at 1-888-595-4411 or fill out our contact form above. We are here to help you get the job done right.
