S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Concrete Tools
As a concrete professional, you know the value of having the proper tools on the job site when you need them. Once it's poured, you have a limited time to work with it. Kinnunen carries a wide selection of the most popular tools and power equipment that will help you turn loose concrete into finished walls, sidewalks and patios.Our customer service professionals receive the best industry training available. So, if you need help choosing the right concrete tool for your next project, simply call us at 1-800-432-8979 or fill out our contact form. We are here to help you get the job done right.
Applications
- Drilling concrete
- brick
- block
Features
- Carbide teeth withstand impact and high heat applications for superior life and productivity versus standard core bits
- Carbide teeth produce fast, clean holes
- Ejector holes for easy core removal
- 3 in. cutting depth
- Compatible with Diablo SDS-Plus pilot bits and extensions
- Maximum performance in cordless and corded SDS-Plus rotary hammers
Cuts
- Concrete
Specifications
| Diameter | 1-7/8" |
| Pack Quantity | 1 |
| Shank | SDS Plus |
| Working Length | 3" |
Item#:
DMAPLCC1050
Manufacturer Item:
DMAPLCC1050
Your Price:
87.39
Each
Features
- 125-12 Extension
- 12 In. length
Specifications
| Length | 1 IN |
| Width | 1 IN |
| Height | 12 IN |
| Weight | 6.371 LBS |
Item#:
701846487917
Manufacturer Item:
701846487917
Your Price:
117.49
Each
The TS 800 STIHL Cutquik® cut-off machine features a magnesium guard making the machine a full 0.7 pounds lighter than the previous model. The TS 800 features a 16" cutting wheel, the largest size we offer in a handheld design. When used with the optional STIHL Cutquik® Cart, the TS 800 is an excellent alternative to conventional walk behinds because it can be used as a handheld or quickly snapped into our cart for long, straight, controlled cuts. It's also fuel efficient, with enough power to cut through asphalt, concrete, rebar, iron and steel with ease. The TS 800 also features an ergonomic design and five-point advanced vibration control system built right into the handle, maximizing comfort so you can power through your day with less fatigue. When long, straight expansion joint cuts are needed, the optional cart, mounted water tank, guide wheel and depth gauge wheel make it easy to help keep the cut straight. With a cutting depth of up to 5.6", the TS 800 is a real pro performer whether in your hands or on the cart.
Features
- The STIHL Inc. "Caring for Nature" seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines "low exhaust emissions" as being cleaner than EPA and/or CARB exhaust emission standards.
- The decompression valve reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope.
- The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine's correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the "dirty" side of the air box.
- The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency.
- Includes retainer for easy use, even with gloves on.
- With consistent semi-automatic re-tensioning, this feature increases the service life of the belts and shaft bearings.
- STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
- The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
- The ergonomic top-handle bar design provides an optimal comfortable grip in any working position.
Specifications
| Maximum Cutting Depth | 5.6" |
| Maximum Wheel Size | 16" |
| Maximum Spindle Speed | 4,600 rpm |
| Engine Speed | 9,300 rpm |
| Engine Power | 6.7 bhp |
| Displacement | 98.5 cc |
| Power Source | Gas |
| Arbor Size | .79 in. |
| Weight | 28.0 lbs. |
| Fuel Capacity | 40.6 oz. |
Item#:
TS-800
Manufacturer Item:
TS-800
Your Price:
1949.99
Each
Our team of experts is continually trained for the most up-to-date technology available on the field. So, If you have any questions about what cordless power tool would work best for your application, we have an answer. Simply call us at 1-888-595-4411 or fill out our contact form above. We are here to help you get the job done right.
