S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Power Tool Accessories
Kinnunen offers an extensive selection of power tool accessories to help you get the most out of your tools. From batteries and chargers to jobsite radios, power tool parts and more, we have everything you need to maximize your productivity. Whatever the task at hand, Kinnunen has the power tool accessories you need to get the job done right.Our customer service professionals receive the best industry training available. So, if you have any questions about what accessories are right for your power tool, we have an answer. Simply call us at 1-800-432-8979 or fill out our contact form.
Features
- Extreme durability and impact resistance in driving hex nuts and self-tapping screws
- Permanent magnet eliminates wobbling by securely gripping screws and hex nuts
- Torque Resistant Design for less stress on the tip
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 1-7/8" |
| Pack Quantity | 1 |
| Shank | 1/4" Hex |
| Nutsetter Size | 7/16" |
Item#:
DNTSS716
Manufacturer Item:
DNTSS716
Your Price:
4.69
Each
Applications
- Grinding
- Polishing Metal
Cuts
- Rebar
- Angle Iron
- Cast Iron
- Steel Bar
Features
- Premium zirconium grain blend is a superior quality formulation designed for fast material removal and long sanding life
- Delivers up to 10 times faster material removal than a bonded grinding wheel
- Type 29 - Conical design
- Arbor - 5/8"-11 SPEED HUB
Specifications
| Arbor | 5/8"-11 |
| Diameter | 4-1/2" |
| Grit | 60 |
| Grit Description | Coarse |
| Hub Type | 29 |
| Pack Quantity | 1 |
| Max RPM | 12000 |
Item#:
DCX045060B01F
Manufacturer Item:
DCX045060B01F
Your Price:
13.69
Each
Specifications
| Length | 5 in |
| Weight | 3.10411 oz |
| System of Measurement | Fractional |
| Size | 1/2 |
| Surface Finish | Black And Gold |
| Type Norseman | 175-VT |
| Material | High-Speed Steel |
| Flute Length | 4.5 in |
| Length Class | Mechanic Length |
| Shank Type | 3-Flats |
| Bit Style | Spiral Flute |
| Point | 135° Split-Point |
| Flute Direction | Right Hand |
| Specification | General Purpose |
| Packaging | Envelope |
| Number of Flutes | 2 |
| DFARS | Specialty Metals COTS- Exempt |
| USMCA Qualifying | Yes |
| HTS | 820750.5 |
Item#:
22853
Manufacturer Item:
22853
Your Price:
22.39
Each
Features
- 3-in-1 40-Grit sanding plate for removal of grout, mortar and tile adhesive
- Carbide Grit Tip reaches hard to access areas and tight corners
- Maximum performance in cordless and corded Fein® and other Starlock tools
- Also compatible with non-Starlock multi-tools from AEG®, Bosch®, Festool®, Makita®, Metabo®, Milwaukee®, Ridgid® and Rockwell®
- Not compatible with Craftsman®, Dewalt®, Dremel®, Hart® or Porter-Cable®
Cuts
- Grout
- Mortar
- Tile Adhesive
Applications
- Grout and Mortar
Specifications
| Pack Quantity | 1 |
| Tooth Design | Carbide Grit |
| Grout Thickness | 1/8" |
| Interface | Starlock |
Item#:
DOSCGX
Manufacturer Item:
DOSCGX
Your Price:
39.59
Each
Features
- Extreme durability and impact resistance in driving hex nuts and self-tapping screws
- Permanent magnet eliminates wobbling by securely gripping screws and hex nuts
- Torque Resistant Design for less stress on the tip
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 1-7/8" |
| Pack Quantity | 1 |
| Shank | 1/4" Hex |
| Nutsetter Size | 1/2" |
Item#:
DNTSS12
Manufacturer Item:
DNTSS12
Your Price:
4.69
Each
Features
- Extreme durability and impact resistance in driving hex nuts and self-tapping screws
- Permanent magnet eliminates wobbling by securely gripping screws and hex nuts
- Torque Resistant Design for less stress on the tip
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 1-7/8" |
| Pack Quantity | 1 |
| Shank | 1/4" Hex |
| Nutsetter Size | 1/4" |
Item#:
DNTSS14
Manufacturer Item:
DNTSS14
Your Price:
4.69
Each
Specifications
| Length | 3.88 in |
| Weight | 0.282192 oz |
| System of Measurement | Wire Gauge |
| Size | #2 |
| Surface Finish | Bright |
| Type Norseman | 240-F |
| Material | High-Speed Steel |
| Flute Length | 2.63 in |
| Length Class | Jobber Length |
| Shank Type | Round |
| Bit Style | Fast Spiral |
| Point | 118° Split-Point |
| Flute Direction | Right Hand |
| Specification | NAS 907A |
| Packaging | Envelope |
| Number of Flutes | 2 |
| DFARS | Specialty Metals COTS- Exempt |
| USMCA Qualifying | Yes |
| HTS | 820750.5 |
Item#:
06870-NM
Manufacturer Item:
06870
Your Price:
4.29
Each
Diamond metal cut-off wheels deliver extreme durability, minimal downtime and increased productivity. These diamond rimmed wheels deliver 100X longer cutting life versus a standard bonded cut-off disc in some of the most intense metal cutting situations. The wheel's long lasting durability maximizes cutting even in extreme applications such as rebar, angle iron, cast iron and steel bar. Diablo's diamond metal cut-off wheels not only provide long lasting cutting life, durability and control, but they also allow for a safer cutting experience.
Features
- Diamond rimmed wheels deliver up to 100X longer cutting life and durability when compared to one standard bonded cut-off disc
- Advanced Electro-Plating Process for even distribution of diamond abrasive cutting edge
- Maintains cutting diameter for consistent cutting results
- Diamond technology is safer to use versus bonded discs by providing more control, less sparks and less dust
- Diamond wheels do not shatter or break when dropped
Cuts
- Rebar
- Angle Iron
- Cast Iron
- Steel Tube
Applications
- Cut-Off
Specifications
| Arbor | 7/8" |
| Diameter | 5" |
| Hub Type | 1 |
| Pack Quantity | 1 |
| Max RPM | 12200 |
| Rim Design | Segmented |
Item#:
DDD050DIA101F
Manufacturer Item:
DDD050DIA101F
Your Price:
29.99
Each
Features
- Extreme durability and impact resistance in driving hex nuts and self-tapping screws
- Permanent magnet eliminates wobbling by securely gripping screws and hex nuts
- Torque Resistant Design for less stress on the tip
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 1-7/8" |
| Pack Quantity | 1 |
| Shank | 1/4" Hex |
| Nutsetter Size | 3/8" |
Item#:
DNTSS38
Manufacturer Item:
DNTSS38
Your Price:
4.69
Each
Item#:
DCT318220H10G
Manufacturer Item:
DCT318220H10G
Your Price:
7.39
Each
Item#:
DMD3164JP1
Manufacturer Item:
DMD3164JP1
Your Price:
23.99
Each
Features
- Unmatched cuts in porcelain
- Maximum diamond durability and retention
- Fastest cutting in porcelain
- Faster starts and less slipping
- More cutting, less clogging
- Dip bit in water before each cut
- Easy Plug Removal
- For use with Retractable Starter Bit Arbors
Specifications
| Hole Saw Diameter | 2 in in |
| Hole Saw Material | Diamond Coated |
| Bit Type | Hole Saw |
| Hole Saw Type | Multipurpose |
| Length | 0.55 Inches |
| Drilling Depth | 0.5 in |
| Minimum Chuck Size Required | 1/4 in |
| Teeth per Inch | 3, Grit |
| Case Included | No |
| Kit | No |
| Recommended Safety Equipment | Safety Glasses |
| Package Contents | (1) 2-1/2" Diamond Max Hole Saw (49-56-5660) |
Item#:
49-56-5660
Manufacturer Item:
49-56-5660
Your Price:
43.99
Each
Features
- Assorted pack includes three Phillips drive bits: #1, #2 and #3
- Extreme durability and impact resistance for up to 50X longer life versus standard bits
- Torque Resistant Design for less stress on the tip
- Optimized tip design reduces wear, minimizes breakage and prevents slippage
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 1" |
| Pack Quantity | 3 |
| Screwdriver Head | PH Variety |
| Screwdriver Style | Phillips |
Item#:
DPHV1-S3
Manufacturer Item:
DPHV1-S3
Your Price:
2.99
Each
Cuts
- Rebar
- Angle Iron
- Cast Iron
- Steel Bar
Features
- Premium Aluminum Oxide Blend - a superior quality formulation designed for fast material removal and long sanding life
- High performance coating that reduces pitch build-up and clogging for maximum productivity
- High strength resin provides superior grit-to-backing bond for extreme durability
- A backing pad is needed in order to attach the fiber disc to a sanding or grinder
- Also use for wood, plastics, and fiberglass
Applications
- Removal
Specifications
| Arbor | 7/8" |
| Diameter | 5" |
| Grit | 50 |
| Grit Description | Coarse |
| Pack Quantity | 4 |
| Max RPM | 12200 |
Item#:
DCF050050S04G
Manufacturer Item:
DCF050050S04G
Your Price:
6.49
Each
Features
- Unmatched cuts in porcelain
- Maximum diamond durability and retention
- Fastest cutting in porcelain
- Faster starts and less slipping
- More cutting, less clogging
- Dip bit in water before each cut
- Easy Plug Removal
- For use with Retractable Starter Bit Arbors
Specifications
| Hole Saw Diameter | 2 in in |
| Hole Saw Material | Diamond Coated |
| Bit Type | Hole Saw |
| Hole Saw Type | Multipurpose |
| Length | 0.55 Inches |
| Drilling Depth | 0.5 in |
| Minimum Chuck Size Required | 1/4 in |
| Teeth per Inch | 4, Grit |
| Case Included | No |
| Kit | No |
| Recommended Safety Equipment | Safety Glasses |
| Package Contents | (1) 2" Diamond Max Hole Saw (49-56-5645) |
Item#:
49-56-5645
Manufacturer Item:
49-56-5645
Your Price:
35.99
Each
Choose the Milwaukee® Diamond Plus™ hole saw for up to 10X longer life when cutting tile, stone and glass. Diamond Plus™ hole saws deliver best-in-class performance, with higher grade diamonds for maximum heat and fracture resistance. An improved braze provides superior diamond retention when cutting hard, abrasive materials. The one-piece hole saw has a 1/4 in. quick change hex shank and features a large slug ejection slot. Designed as the single cutting solution for all tile, stone, and glass applications, Diamond Plus™ offers the lowest cost-per-hole on the market.
Features
- Diamond Plus™ - greater durability and toughness delivers up to 10X longer life
- Higher grade diamonds and improved braze - provide best-in-class performance
- Large slug ejection slot - offers easy plug removal
- Versatile - ideal for cutting anchoring and clearance holes in all tile, stone and glass
Specifications
| Hole Saw Diameter (in) | 1-1/2 in |
| Hole Saw Material | Diamond Coated |
| Bit Type | Hole Saw |
| Hole Saw Type | Multipurpose |
| Length | 0.55 Inches |
| Drilling Depth (in) | 0.5 |
| Pilot Bit Diameter (in) | 0.0 |
| Minimum Chuck Size Required | 1/4 in |
| Teeth per Inch | 3 |
| Case Included | No |
| Kit | No |
| Recommended Safety Equipment | Safety Glasses |
| Package Contents | 1 Bit |
Item#:
49-56-5630
Manufacturer Item:
49-56-5630
Your Price:
32.00
Each
Features
- Quality aluminum oxide abrasive at a low initial price
- 1/4 in. thick wheel designed for offhand stock removal
- High performance bond designed for extremely fast cut while retaining excellent wheel life
- Good choice when low initial price is needed for small jobs or inexperienced operators working on 400 series stainless, hard carbon steels, soft carbon steels
Applications
- Stock Removal
Specifications
| Diameter | 5 in. |
| Abrasive | Aluminum Oxide |
| Wheel type | Type 27 |
| Specifications | NORTON METAL |
| Max Operating Speed RPM | 12225 |
| Thickness | 1/4 In. |
| Arbor hole | 5/8 In. - 11 |
Item#:
66252843613
Manufacturer Item:
66252843613
Your Price:
5.49
Each
Save money and cut or remove stock with enhanced efficiency when you wield the Metal A AO Type 27 grinding and cutting wheel. Engineered for cutting at 30- or 90-degree angles, this wheel is great for notching, offhand cut-offs and light side grinding. With a low initial price, high-quality aluminum oxide abrasive, durable bond and thickness of 1/8 inch, this extra-hard wheel strikes the perfect balance between economy and efficiency and is great for inexperienced operators or small jobs where minimizing cost is crucial.
Features
- Quality aluminum oxide abrasive at a low initial price
- 1/8 in. thick wheel designed to be used at a 90 degree angle for offhand cut-off, notching or 30 degree angle for light side grinding
- Durable bond and wheel hardness are designed to provide the best mix of cut rate and life
- Good choice when low initial price is needed for small jobs or inexperienced operators working on 400 series stainless, hard carbon steels, soft carbon steels
- All wheels are fully speed tested and comply with ANSI standards
Applications
- Cut-Off
- Stock Removal
Specifications
| Thickness | 1/8 In. |
| Diameter | 4-1/2 In. |
| Grit Size | 24 Grit |
| Abrasive/Mineral | Aluminum Oxide |
| Size Derived | 4-1/2 x 1/8 x 5/8-11 In. |
| Wheel Type | Type 27 |
| Max Operating Speed | 13580 |
| Color / Finish | Black |
Item#:
66252843609
Manufacturer Item:
66252843609
Your Price:
4.09
Each
Specifications
| Length | 4 in |
| Weight | 0.634931 oz |
| System of Measurement | Fractional |
| Size | 1/4 |
| Surface Finish | Gold Oxide |
| Type Norseman | 190-AL |
| Material | High-Speed Steel |
| Flute Length | 2-3/4 in |
| Length Class | Jobber Length |
| Shank Type | Round |
| Bit Style | Spiral Flute |
| Point | 135° Split-Point |
| Flute Direction | Left Hand |
| Specification | NAS 907B |
| Packaging | Envelope |
| Number of Flutes | 2 |
| DFARS | Specialty Metals COTS- Exempt |
| USMCA Qualifying | Yes |
| HTS | 820750.5 |
Item#:
92460-NM
Manufacturer Item:
92460
Your Price:
13.19
Each
Choose the Milwaukee® Diamond Plus™ hole saw for up to 10X longer life when cutting tile, stone and glass. Diamond Plus™ hole saws deliver best-in-class performance, with higher grade diamonds for maximum heat and fracture resistance. An improved braze provides superior diamond retention when cutting hard, abrasive materials. The one-piece hole saw has a 1/4 in. quick change hex shank and features a large slug ejection slot. Designed as the single cutting solution for all tile, stone, and glass applications, Diamond Plus™ offers the lowest cost-per-hole on the market.
Features
- Diamond Plus™: greater durability and toughness delivers up to 10X longer life
- Higher grade diamonds and improved braze: provide best-in-class performance
- Large slug ejection slot: offers easy plug removal
- Versatile: ideal for cutting anchoring and clearance holes in all tile, stone and glass
Specifications
| Hole Saw Diameter (in) | 1-1/4 in |
| Hole Saw Material | Diamond Coated |
| Bit Type | Hole Saw |
| Hole Saw Type | Multipurpose |
| Length (in) | 0.55 |
| Drilling Depth (in) | 0.5 |
| Minimum Chuck Size Required | 1/4 in |
| Teeth per Inch | 3 |
| Case Included | No |
| Kit | No |
| Recommended Safety Equipment | Safety Glasses |
| Package Contents | 1 Bit |
Item#:
49-56-5620
Manufacturer Item:
49-56-5620
Your Price:
27.99
Each
Features
- 1/4 in. round shank
- High-speed steel construction provides strength and durability
- Fits all hole saws up to 1-3/16 in.
- Fits all drill chucks 1/4 in. and larger
Specifications
| Arbor Design | Hole Saw |
| Backing Plate Diameter | 0.250000 in |
| Color / Finish | Steel |
| Diameter | 0.25 in |
| Brand / Model Compatibility | 49-56-8000, 49-56-8002, 49-56-8005 |
| Inside Diameter | 0.250000 in |
| Outside Diameter | 0.250000 in |
| Length | 4.2 Inches |
| Material | High Speed Steel |
| Minimum Chuck Size Required | 1/4 in |
Item#:
49-56-6950
Manufacturer Item:
49-56-6950
Your Price:
10.00
Each
Choose the Milwaukee® Diamond Plus™ hole saw for up to 10X longer life when cutting tile, stone and glass. Diamond Plus™ hole saws deliver best-in-class performance, with higher grade diamonds for maximum heat and fracture resistance. An improved braze provides superior diamond retention when cutting hard, abrasive materials. The one-piece hole saw has a 1/4 in. quick change hex shank and features a large slug ejection slot. Designed as the single cutting solution for all tile, stone, and glass applications, Diamond Plus™ offers the lowest cost-per-hole on the market.
Features
- Diamond Plus™ - greater durability and toughness delivers up to 10X longer life
- Higher grade diamonds and improved braze - provide best-in-class performance
- Large slug ejection slot - offers easy plug removal
- Versatile - ideal for cutting anchoring and clearance holes in all tile, stone and glass
Specifications
| Hole Saw Diameter (in) | 1-3/8 in |
| Hole Saw Material | Diamond Coated |
| Bit Type | Hole Saw |
| Hole Saw Type | Multipurpose |
| Length | 0.55 Inches |
| Drilling Depth (in) | 0.5 |
| Pilot Bit Diameter (in) | 0.0 |
| Minimum Chuck Size Required | 1/4 in |
| Teeth per Inch | 3 |
| Case Included | No |
| Kit | No |
| Recommended Safety Equipment | Safety Glasses |
| Package Contents | 1 Bit |
Item#:
49-56-5625
Manufacturer Item:
49-56-5625
Your Price:
29.99
Each
Choose the Milwaukee® Diamond Plus™ hole saw for up to 10X longer life when cutting tile, stone and glass. Diamond Plus™ hole saws deliver best-in-class performance, with higher grade diamonds for maximum heat and fracture resistance. An improved braze provides superior diamond retention when cutting hard, abrasive materials. The one-piece hole saw has a 1/4 in. quick change hex shank and features a large slug ejection slot. Designed as the single cutting solution for all tile, stone, and glass applications, Diamond Plus™ offers the lowest cost-per-hole on the market.
Features
- Diamond Plus™: greater durability and toughness delivers up to 10X longer life
- Higher grade diamonds and improved braze: provide best-in-class performance
- Large slug ejection slot: offers easy plug removal
- Versatile: ideal for cutting anchoring and clearance holes in all tile, stone and glass
Specifications
| Hole Saw Diameter (in) | 1-1/8 in |
| Hole Saw Material | Diamond Coated |
| Bit Type | Hole Saw |
| Hole Saw Type | Multipurpose |
| Length (in) | 0.55 |
| Drilling Depth (in) | 0.5 |
| Minimum Chuck Size Required | 1/4 in |
| Teeth per Inch | 3 |
| Case Included | No |
| Kit | No |
| Recommended Safety Equipment | Safety Glasses |
| Package Contents | 1 Bit |
Item#:
49-56-5615
Manufacturer Item:
49-56-5615
Your Price:
23.49
Each
Item#:
DSPD4910-S3
Manufacturer Item:
DSPD4910-S3
Your Price:
32.59
Each
Abrasive Cut-Off Wheel, Abrasive Wheel Type Type 27, Abrasive Wheel Diameter 4 1/2 in, Thickness 0.25 in, Arbor Hole Size 5/8 In.-11, Abrasive Material Ceramic, Abrasive Grit 24, Max. RPM 13,300 RPM, Series XP Ceramic, Specifications Designed for Heavy Grinding On Most Metal Pipes, Diamond Knockout No, Application Aluminum, Ferrous Metal, Gray Iron, Stainless. The XPTM Ultra Performance Ceramic Fast Grind Wheels provides fast cutting speeds at 14% increased grinding speed vs. existing XPTM Ceramic Grinding Wheels. The wheels can be used on most materials and stainless steel when heavy grinding is required. They are manufactured in our facility that is certified to the latest ISO 9001:2015 standards
Features
- UP TO 50% LONGER LIFE VS. NORTON
- PRESSURE PACTDESIGN: High tech grains are packed tightly under intense heat and pressure.
- GRIND MORE METAL: Use fewer wheels in extreme applications
- FAST GRINDING IN DEMANDING APPLICATIONS: Aggressively grinds a wide range of metals with a self-sharpening, crystalline grain structure
- SMOOTH AND POWERFUL GRINDING: High density grain concentration grinds fast and smooth with low vibration and minimal jumping
- DURABLE BY DESIGN: Built with three sheets of fiberglass for wheel strength. Designed to reduce wheel breakage.
Specifications
| Length | 4.5 in |
| Width | 4.5 in |
| Height | 0.75 in |
| Weight | 0.537 lbs |
| Product Diameter Us | 4.5 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Disclaimer | Based on DEWALT DWA8908F, DW8909FH, DW8927FH vs. Norton 66253370794, 66253370800 grinding 1/2" A36 Steel Plate. Norton is a registered trademark of Saint-Gobain Abrasives, Inc., which has not endorsed or approved this comparison. |
| Prop 65 Generic Warning | No |
| Warranty | MWC |
| 7/8 In Diamond Arbor Knockout | No |
| Arbor Size | 0.625 |
| Blade Diameter | 4 1/2 in In. |
| Blade Material | Ceramic |
| Cuts Into | Metal |
| Grit | 24 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Maximum Speed | 13300 RPM Rpm |
| Thickness | 0.25 In |
| Product Primary Material | Ceramic |
Item#:
DWA8909FH
Manufacturer Item:
DWA8909FH
Your Price:
9.99
Each
Features
- Drill, countersink and counterbore in one step
- Four-cutter countersink and tapered drill bit provide superior speed and ideal finish
- Replacement tapered bits offered
Specifications
| Length | 3.888 in |
| Width | 0.75 in |
| Height | 7.75 in |
| Weight | 0.22 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Prop 65 Generic Warning | Yes |
| Warranty | MWC |
| California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
| Claims Needed | No |
| Bit Type | Set |
| Individual Vs. Set (Syndigo) | SET |
| Self Feeding | No |
| Shank Type | Straight |
| Product Primary Material | High Speed Steel |
Item#:
DW2535
Manufacturer Item:
DW2535
Your Price:
35.99
Each
Features
- Premium Aluminum Oxide Blend - a superior quality formulation designed for fast material removal and long sanding life
- High performance coating that reduces pitch build-up and clogging for maximum productivity
- High strength resin provides superior grit-to-backing bond for extreme durability
- A backing pad is needed in order to attach the fiber disc to a sanding or grinder
- Also use for wood, plastics, and fiberglass
Cuts
- Rebar
- Angle Iron
- Cast Iron
- Steel Bar
Applications
- Removal
Specifications
| Arbor | 7/8" |
| Diameter | 7" |
| Grit | 50 |
| Grit Description | Coarse |
| Pack Quantity | 2 |
| Max RPM | 8450 |
Item#:
DCF070050S02G
Manufacturer Item:
DCF070050S02G
Your Price:
5.19
Each
Specifications
| Cutting depth (in) | 2 |
| Cutting depth (mm) | 50 |
| Bore dia. (in) | 15/16 |
| Bore dia. (mm) | 23.81 |
Item#:
63134238042
Manufacturer Item:
63134238042
Your Price:
95.49
Each
Item#:
DND050080H60P
Manufacturer Item:
DND050080H60P
Your Price:
42.39
Each
Features
- System includes: (1) 3/8" Hex Shank Mandril, (1) 1/2" Adaptor Nut, and (1) 5/8" Adaptor Nut
- 60mm (2-3/8 in) cutting depth for deeper holes in one pass and increased productivity
- Snap-Lock Plus™ mandrel system allows a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool free plug ejection for fast material removal
- 1/2" and 5/8" thread adapter nuts convert other hole saw brands to Snap-Lock Plus™
Applications
- Drills wood
- plastic
- aluminum
- metal
- stainless steel
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Specifications
| Shank | 3/8" Hex. |
Item#:
DHSAR375
Manufacturer Item:
DHSAR375
Your Price:
23.49
Each
Applications
- Grinding
- Blending
Specifications
| Diameter | 2" |
| Grit | 80 |
| Weight | 0.0125 lb |
Item#:
52275
Manufacturer Item:
52275
Your Price:
1.39
Each
Our team of experts is continually trained for the most up-to-date technology available on the field. So, If you have any questions about what cordless power tool would work best for your application, we have an answer. Simply call us at 1-888-595-4411 or fill out our contact form above. We are here to help you get the job done right.
