S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Power Tool Accessories
Kinnunen offers an extensive selection of power tool accessories to help you get the most out of your tools. From batteries and chargers to jobsite radios, power tool parts and more, we have everything you need to maximize your productivity. Whatever the task at hand, Kinnunen has the power tool accessories you need to get the job done right.Our customer service professionals receive the best industry training available. So, if you have any questions about what accessories are right for your power tool, we have an answer. Simply call us at 1-800-432-8979 or fill out our contact form.
Features
- Fastest drilling compared to other Milwaukee diamond core bits
- Maximum run time
- Ideal for concrete and concrete with rebar
- Thin 3 mm Kerf delivers faster holes
- Top quality diamonds
- 10mm segment height
- 1-1/4 in. to 7 thread connection
- Designed to be used wet
- 16 in. drilling depth
- Max RPM: 1315
Specifications
| Bit Diameter | 2 |
| Length | 18.701 Inches |
| Bit Material | Diamond Coated |
| Chuck Fitment | Hex |
| Package Contents | (1) 2" Diamond Ultra Wet Core Bit |
| Bit Type | Core |
| Drilling Depth | 13 in |
| Wet or Dry Application | Wet |
| Maximum RPM | 1315 |
| Segment Height | 0.39 in |
| Recommended Safety Equipment | Safety Glasses |
Features
- Tamper resistant TORX screws feature a post in the center of the recess -- this post will only fit into a tamper resistant TORX bit
- TORX is a registered trademark of Acument Intellecutal Properties LLC
Specifications
| Adjustment Screw | No |
| Angled Head | No |
| Fish Tape Puller | No |
| Magnetic | No |
| Overall Length (IN) | 1" |
| Pin Driven | No |
| Primary Trade | Automotive/DIY/Drywaller/Electrician/Framer/General Contractor |
| Product Dim Length (IN) | 1 in |
| Spring Loaded | No |
| Warranty Short | Limited Warranty against product defects for reasonable useful life. Add to long description at end - |
| Wire Crimper | No |
| Wire Cutter | No |
| Wire Stripper | No |
Diablo's SPEEDemon ™ Red Granite Carbide Tipped Hammer Drill Bit range provides one of the fastest and longest lasting drilling solutions on the market for concrete, masonry and stone. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill fast, accurate holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes. This range is Impact Strong™ for increased shank stability and durability in cordless and corded impact and drill drivers.
Applications
- Drilling concrete
- masonry
- stone
Features
- Diablo made carbide tip withstands impact and high heat applications for superior life versus standard masonry hammer drill bits
- Multi-ground Grip Point Tip delivers stability and accuracy required for fast, precise holes
- Hi-performance brazing and hardening process extends life of carbide tip and increases productivity
- Optimized flute design removes dust faster, keeping the carbide tip cooler for ultimate strength and durability
- Impact Strong™ increases shank stability and durability
- More holes per charge in cordless impact and drill drivers
- Maximum performance in hammer or rotary drilling applications
Cuts
- Concrete
- Masonry
- Stone
Specifications
| Diameter | 1/4" |
| Length | 6" |
| Pack Quantity | 5 |
| Shank | Hex |
| Working Length | 4" |
Features
- 1/2 in. capacity, keyed chuck
- 5/8 in., 16 thread
- Chuck key included
- Easy replacement
Specifications
| Chuck Capacity | 0.625 in |
| Chuck Size | 5/8 in |
| Chuck Design | Keyed |
| Brand / Model Compatibility | 1610-1, 1660-1, 1675-1, 1630-1 |
| Chuck Key Storage | No |
| Material | metal |
| Color / Finish | black, silver |
| Length | 2.0 Inches |
| Chuck Key Included | Yes |
| Impact Driver Chuck | No |
Features
- Made from S2 modified shock resistant steel for professional performance and durability
- Proprietary precision CNC machined tips for excellent fit in fastener recess
- Patented spiral torsion zone absorbs impact and extends bit life
Specifications
| Length | Multiple |
| Drive/Shank Size | 1/4"-Hex |
| Tip Configuration | Multiple |
| Tip/Opening Size | Multiple |
| Finish | Gunmetal Bronze |
| Material | S2 Modified Steel |
Lenox MetalMax Diamond Edge Cutoff Wheel, 7" x 7/8", is an alternative to bonded abrasive cut-off wheels. Breakthrough diamond technology delivers 1,000 or more cuts and 30X longer life than thin bonded cutoff wheels without sacrificing speed or finish. Made of solid steel to greatly reduce the risk of breakage, the combination of a steel body with a diamond edge allows MetalMax to hold its original wheel diameter until the last cut, meaning better control, reach, and cut precision throughout the wheel life. The enhanced design substantially reduces dust particles and lessens odor. Lenox MetalMax is suitable for metal cutting applications including steel, sheet metal, stainless steel, rebar, cast iron, aluminum and non-ferrous metals, and works at the same speeds and feeds as thin bonded abrasive wheels. Average performance in 1-in; carbon steel square tube vs. thin bonded abrasive cutoff wheels. Cutting wax or saw lubricant is recommended to avoid chip welding when cutting aluminum.
Features
- "1,000+ Cuts:
- MetalMax Delivers 1,000 Or More Cuts With No Need For Wheel Changes. That Is 30 Times Longer Life Than Thin Bonded Cut-Off Wheels.
- Long Life:
- Advanced Diamond Technology Provides Extreme Durability In Metal Cutting Applications, Leading To Increased Productivity, Reduced Downtime, And A Lower Cost Per Cut Compared To Thin Bonded Cut-Off Wheels.
- Diameter Retention:
- Because Lenox MetalMax Is Made With Diamonds, It Doesn't Get Smaller. The Cutting Depth Stays The Same Throughout Its Life, Meaning Better Control, Reach And Precision.
- Less Dust Residue:
- With Lenox MetalMax There Is Less Odor And Dust Residue As The Wheel Does Not Wear Down Like Bonded Abrasives. Sparks Originate Only From The Material Being Cut.
- One Wheel, Multiple Materials:
- Lenox MetalMax Is Designed For Use In The Same Power Tools As Bonded Abrasive Wheels, At The Same Rpms And Feed Forces. No Changes In Operating Settings Are Required. Use Lenox MetalMax As You Would A Bonded Abrasive Wheel.
Specifications
| Length | 7.1 in |
| Width | 0.3 in |
| Height | 7.3 in |
| Weight | 0.76 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Warranty | NLW |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Material Group | METAL |
Diablo's SPEEDemon ™ Red Granite Carbide Tipped Hammer Drill Bit range provides one of the fastest and longest lasting drilling solutions on the market for concrete, masonry and stone. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill fast, accurate holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes. This range is Impact Strong™ for increased shank stability and durability in cordless and corded impact and drill drivers.
Features
- 5-Piece Set Offers 30% in Savings
- Diablo made carbide tip withstands impact and high heat applications for superior life versus standard masonry hammer drill bits
- Multi-ground Grip Point Tip delivers stability and accuracy required for fast, precise holes
- Hi-performance brazing and hardening process extends life of carbide tip and increases productivity
- Optimized flute design removes dust faster, keeping the carbide tip cooler for ultimate strength and durability
- Impact Strong™ increases shank stability and durability
- More holes per charge in cordless impact and drill drivers
- Maximum performance in hammer or rotary drilling applications
- Set features 5 bits: (1) 5/32" x 4" x 6", (1) 3/16" x 4" x 6", (1) 1/4" x 4" x 6", (1) 5/16" x 4" x 6", (1) 3/8" x 4" x 6"
Cuts
- Concrete
- Masonry
- Stone
Applications
- Drilling concrete
- masonry
- stone
Specifications
| Pack Quantity | 5 |
| Shank | Hex |
Save money and cut or remove stock with enhanced efficiency when you wield the Metal A AO Type 27 grinding and cutting wheel. Engineered for cutting at 30- or 90-degree angles, this wheel is great for notching, offhand cut-offs and light side grinding. With a low initial price, high-quality aluminum oxide abrasive, durable bond and thickness of 1/8 inch, this extra-hard wheel strikes the perfect balance between economy and efficiency and is great for inexperienced operators or small jobs where minimizing cost is crucial.
Features
- Quality aluminum oxide abrasive at a low initial price
- 1/8 in. thick wheel designed to be used at a 90 degree angle for offhand cut-off, notching or 30 degree angle for light side grinding
- Durable bond and wheel hardness are designed to provide the best mix of cut rate and life
- Good choice when low initial price is needed for small jobs or inexperienced operators working on 400 series stainless, hard carbon steels, soft carbon steels
Applications
- Cut-Off
- Stock Removal
Specifications
| Diameter | 7 in. |
| Abrasive | Aluminum Oxide |
| Wheel type | Type 27 |
| Specifications | NORTON METAL |
| Max Operating Speed RPM | 8600 |
| Arbor hole | 5/8 In. - 11 |
| Thickness | 1/8 In. |
Diablo's Multi-Material Carbide Tipped Hammer Drill Bit range provides faster starts and longer life in tile, masonry, concrete, wood and metal. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill faster holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes in a variety of applications. This range is Impact Strong™ for increased shank stability and durability in cordless and corded impact and drill drivers.
Applications
- Drilling concrete
- tile
- masonry
- wood
- metal
Features
- Diablo made carbide tip withstands impact and high heat applications for superior life versus standard multi-purpose hammer drill bits
- Multi-Ground Grip Point Tip delivers stability and accuracy required for fast, precise holes
- Optimized flute design removes dust/chip build-up faster, keeping the carbide tip cooler for ultimate strength and durability
- Impact Strong™ increases shank stability and durability
- More holes per charge in cordless impact and drill drivers
- Maximum performance in hammer or rotary drilling applications
Cuts
- Concrete
- Metal
- Wood
- Brick/Block
- Tile
Specifications
| Diameter | 3/16" |
| Length | 6" |
| Pack Quantity | 1 |
| Shank | Hex |
| Working Length | 4" |
Diablo's Multi-Material Carbide Tipped Hammer Drill Bit range provides faster starts and longer life in tile, masonry, concrete, wood and metal. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill faster holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes in a variety of applications. This range is Impact Strong™ for increased shank stability and durability in cordless and corded impact and drill drivers.
Applications
- Drilling concrete
- tile
- masonry
- wood
- metal
Features
- Diablo made carbide tip withstands impact and high heat applications for superior life versus standard multi-purpose hammer drill bits
- Multi-Ground Grip Point Tip delivers stability and accuracy required for fast, precise holes
- Optimized flute design removes dust/chip build-up faster, keeping the carbide tip cooler for ultimate strength and durability
- Impact Strong™ increases shank stability and durability
- More holes per charge in cordless impact and drill drivers
- Maximum performance in hammer or rotary drilling applications
Cuts
- Concrete
- Metal
- Wood
- Brick/Block
- Tile
Specifications
| Diameter | 5/32" |
| Length | 6" |
| Pack Quantity | 1 |
| Shank | Hex |
| Working Length | 4" |
Diablo's Multi-Material Carbide Tipped Hammer Drill Bit range provides faster starts and longer life in tile, masonry, concrete, wood and metal. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill faster holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes in a variety of applications. This range is Impact Strong™ for increased shank stability and durability in cordless and corded impact and drill drivers.
Applications
- Drilling concrete
- tile
- masonry
- wood
- metal
Cuts
- Concrete
- Metal
- Wood
- Brick/Block
- Tile
Features
- Diablo made carbide tip withstands impact and high heat applications for superior life versus standard multi-purpose hammer drill bits
- Multi-Ground Grip Point Tip delivers stability and accuracy required for fast, precise holes
- Optimized flute design removes dust/chip build-up faster, keeping the carbide tip cooler for ultimate strength and durability
- Impact Strong™ increases shank stability and durability
- More holes per charge in cordless impact and drill drivers
- Maximum performance in hammer or rotary drilling applications
Specifications
| Diameter | 1/4" |
| Length | 6" |
| Pack Quantity | 1 |
| Shank | Hex |
| Working Length | 4" |
Diablo's Multi-Material Carbide Tipped Hammer Drill Bit range provides faster starts and longer life in tile, masonry, concrete, wood and metal. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill faster holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes in a variety of applications. This range is Impact Strong™ for increased shank stability and durability in cordless and corded impact and drill drivers.
Features
- Diablo made carbide tip withstands impact and high heat applications for superior life versus standard multi-purpose hammer drill bits
- Multi-Ground Grip Point Tip delivers stability and accuracy required for fast, precise holes
- Optimized flute design removes dust/chip build-up faster, keeping the carbide tip cooler for ultimate strength and durability
- Impact Strong™ increases shank stability and durability
- More holes per charge in cordless impact and drill drivers
- Maximum performance in hammer or rotary drilling applications
Applications
- Drilling concrete
- tile
- masonry
- wood
- metal
Cuts
- Concrete
- Metal
- Wood
- Brick/Block
- Tile
Specifications
| Diameter | 5/16" |
| Length | 6" |
| Pack Quantity | 1 |
| Shank | Hex |
| Working Length | 4" |
Diablo's Multi-Material Carbide Tipped Hammer Drill Bit range provides faster starts and longer life in tile, masonry, concrete, wood and metal. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill faster holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes in a variety of applications. This range is Impact Strong™ for increased shank stability and durability in cordless and corded impact and drill drivers.
Features
- Diablo made carbide tip withstands impact and high heat applications for superior life versus standard multi-purpose hammer drill bits
- Multi-Ground Grip Point Tip delivers stability and accuracy required for fast, precise holes
- Optimized flute design removes dust/chip build-up faster, keeping the carbide tip cooler for ultimate strength and durability
- Impact Strong™ increases shank stability and durability
- More holes per charge in cordless impact and drill drivers
- Maximum performance in hammer or rotary drilling applications
Applications
- Drilling concrete
- tile
- masonry
- wood
- metal
Cuts
- Concrete
- Metal
- Wood
- Brick/Block
- Tile
Specifications
| Diameter | 3/8" |
| Length | 6" |
| Pack Quantity | 1 |
| Shank | Hex |
| Working Length | 4" |
Diablo's Multi-Material Carbide Tipped Hammer Drill Bit range provides faster starts and longer life in tile, masonry, concrete, wood and metal. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill faster holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes in a variety of applications. This range is Impact Strong™ for increased shank stability and durability in cordless and corded impact and drill drivers.
Applications
- Drilling concrete
- tile
- masonry
- wood
- metal
Cuts
- Concrete
- Metal
- Wood
- Brick/Block
- Tile
Features
- Diablo made carbide tip withstands impact and high heat applications for superior life versus standard multi-purpose hammer drill bits
- Multi-Ground Grip Point Tip delivers stability and accuracy required for fast, precise holes
- Optimized flute design removes dust/chip build-up faster, keeping the carbide tip cooler for ultimate strength and durability
- Impact Strong™ increases shank stability and durability
- More holes per charge in cordless impact and drill drivers
- Maximum performance in hammer or rotary drilling applications
Specifications
| Diameter | 1/2" |
| Length | 6" |
| Pack Quantity | 1 |
| Shank | Hex |
| Working Length | 4" |
Diablo's Multi-Material Carbide Tipped Hammer Drill Bit range provides faster starts and longer life in tile, masonry, concrete, wood and metal. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill faster holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes in a variety of applications. This range is Impact Strong™ for increased shank stability and durability in cordless and corded impact and drill drivers.
Applications
- Drilling concrete
- tile
- masonry
- wood
- metal
Features
- Diablo made carbide tip withstands impact and high heat applications for superior life versus standard multi-purpose hammer drill bits
- Multi-Ground Grip Point Tip delivers stability and accuracy required for fast, precise holes
- Optimized flute design removes dust/chip build-up faster, keeping the carbide tip cooler for ultimate strength and durability
- Impact Strong™ increases shank stability and durability
- More holes per charge in cordless impact and drill drivers
- Maximum performance in hammer or rotary drilling applications
Cuts
- Concrete
- Metal
- Wood
- Brick/Block
- Tile
Specifications
| Diameter | 1/8" |
| Length | 3" |
| Pack Quantity | 1 |
| Shank | Hex |
| Working Length | 2" |
The Milwaukee® SHOCKWAVE™ lineman's 7/16 in. hex to 1/2 in. square adapter is the most durable adapter on the market and it's pin detent allows for better retention to the socket. The adapter features an optimized Shockzone™ that absorbs peak torque and prevents the adapter from breaking, providing up to 30X life. The adapter is made from Custom Alloy76™ steel, which maximizes it's resistance to wear and shock. The 7/16 in. hex shanks allows the adapter to lock into all 7/16 in. quick connect chucks.
Features
- Pin detent for better retention
- Optimized shock zone geometry absorbs peak torque and prevents breaking
- Custom alloy 76 steel maximizes resistance to wear and shock
- 7/16 in. hex shank
- Fits all 1/2 in. drive accessories
- Designed for use with SHOCKWAVE™ lineman's 3 in. 1 utility sockets
Specifications
| Case Included | No |
| Color / Finish | Black |
| Etched / Stamped Size Identification | No |
| Impact or Standard | Impact |
| Drive Size | Multiple Drive Size Set |
| Drive Size (If Multiple) | 7/16" |
| Length | 1.875 Inches |
| Material | Proprietary Steel |
| Package Contents | (1) SHOCKWAVE Lineman's 7/16" to 1/2" Impact Socket Adapter |
| Piece Count | 1 |
| ASTM F1505-01 Compliant | Not Tested |
| IEC 60900 Compliant | Not Tested |
| NFPA 70E Compliant | Not Tested |
