S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Power Tool Accessories
Kinnunen offers an extensive selection of power tool accessories to help you get the most out of your tools. From batteries and chargers to jobsite radios, power tool parts and more, we have everything you need to maximize your productivity. Whatever the task at hand, Kinnunen has the power tool accessories you need to get the job done right.Our customer service professionals receive the best industry training available. So, if you have any questions about what accessories are right for your power tool, we have an answer. Simply call us at 1-800-432-8979 or fill out our contact form.
Features
- Assorted pack includes seven Hex drive bits: 9/64 in., 5/64 in., 3/32 in., 1/8 in., 5/32 in., 3/16 in., and 7/64 in.
- Extreme durability and impact resistance for up to 50X longer life versus standard bits
- Torque Resistant Design for less stress on the tip
- Optimized tip design reduces wear, minimizes breakage and prevents slippage
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 1" |
| Pack Quantity | 7 |
| Screwdriver Head | HX Variety |
| Screwdriver Style | Hex |
Bosch Nail Strike Wood-Boring Bits are the first wood-boring bits to power through nail-embedded wood. The bit features reamer edges made of tough, reinforced steel that cut through up to 30 nails. Each bit has a fully threaded cone tip that pulls it through the wood, offering best-in-class speed through 2x4s. These bits are ideal for boring clean holes through wood fast to run conduit or pipe. The contoured paddle design also enhances chip removal, contributing to the fast performance. The hex shank with power groove reduces bit slippage in the drill and makes it suitable for use with a variety of drill types, including impact drills. These bits should not be used in a drill press and are not intended for counter boring or doweling.
Features
- Nail-killing wood-boring bit design adds extreme durability to Bosch speed for nail-embedded wood
- Reinforced reamer cutting edges make this bit the first wood-boring bit to drill through nails
- Optimized for wood and some wood with nails combines superior drill speed with engineered nail-cutting durability
- Fully threaded cone tip pulls the bit through wood quickly and effortlessly
- Contoured paddle design increases speed with faster chip removal
- Hex shank improves bit grip and allows use with a variety of drill types
- Premium bit material combined with innovation for great performance and life
Specifications
| Bit Diameter | 1/2" |
| Bit Material | High Carbon Steel |
| Case Included | No |
| Drilling Depth (in) | 5 |
| Flute Length (in) | 3 |
| Length (in) | 6 |
| Overall Length (in) | 6 |
| Quick Change Impact Driver Bit | No |
| Self Feeding | Yes |
| Set / Individual | Individual |
| Shank Diameter (in) | 0.25 |
| Single / Double Ended | Single |
Bosch Nail Strike Wood-Boring Bits are the first wood-boring bits to power through nail-embedded wood. The bit features reamer edges made of tough, reinforced steel that cut through up to 30 nails. Each bit has a fully threaded cone tip that pulls it through the wood, offering best-in-class speed through 2x4s. These bits are ideal for boring clean holes through wood fast to run conduit or pipe. The contoured paddle design also enhances chip removal, contributing to the fast performance. The hex shank with power groove reduces bit slippage in the drill and makes it suitable for use with a variety of drill types, including impact drills. These bits should not be used in a drill press and are not intended for counter boring or doweling.
Features
- Nail-killing wood-boring bit design adds extreme durability to Bosch speed for nail-embedded wood
- Reinforced reamer cutting edges make this bit the first wood-boring bit to drill through nails
- Optimized for wood and some wood with nails combines superior drill speed with engineered nail-cutting durability
- Fully threaded cone tip pulls the bit through wood quickly and effortlessly
- Contoured paddle design increases speed with faster chip removal
- Hex shank improves bit grip and allows use with a variety of drill types
- Premium bit material combined with innovation for great performance and life
Specifications
| Bit Diameter | 3/4" |
| Bit Material | High Carbon Steel |
| Case Included | No |
| Drilling Depth (in) | 5 |
| Flute Length (in) | 3 |
| Minimum Chuck Size Required | 1/4 in |
| Overall Length (in) | 6 |
| Quick Change Impact Driver Bit | No |
| Self Feeding | Yes |
| Set / Individual | Individual |
| Shank Diameter (in) | 0.25 |
| Single / Double Ended | Single |
Bosch Nail Strike Wood-Boring Bits are the first wood-boring bits to power through nail-embedded wood. The bit features reamer edges made of tough, reinforced steel that cut through up to 30 nails. Each bit has a fully threaded cone tip that pulls it through the wood, offering best-in-class speed through 2x4s. These bits are ideal for boring clean holes through wood fast to run conduit or pipe. The contoured paddle design also enhances chip removal, contributing to the fast performance. The hex shank with power groove reduces bit slippage in the drill and makes it suitable for use with a variety of drill types, including impact drills. These bits should not be used in a drill press and are not intended for counter boring or doweling.
Features
- Nail-killing wood-boring bit design adds extreme durability to Bosch speed for nail-embedded wood
- Reinforced reamer cutting edges make this bit the first wood-boring bit to drill through nails
- Optimized for wood and some wood with nails combines superior drill speed with engineered nail-cutting durability
- Fully threaded cone tip pulls the bit through wood quickly and effortlessly
- Contoured paddle design increases speed with faster chip removal
- Hex shank improves bit grip and allows use with a variety of drill types
- Premium bit material combined with innovation for great performance and life
Specifications
| Bit Diameter | 5/8" |
| Bit Material | High Carbon Steel |
| Case Included | No |
| Drilling Depth (in) | 5 |
| Flute Length (in) | 3 |
| Length (in) | 6 |
| Minimum Chuck Size Required | 1/4 in |
| Overall Length (in) | 6 |
| Quick Change Impact Driver Bit | No |
| Self Feeding | Yes |
| Set / Individual | Individual |
| Shank Diameter (in) | 0.25 |
| Single / Double Ended | Single |
Bosch Nail Strike Wood-Boring Bits are the first wood-boring bits to power through nail-embedded wood. The bit features reamer edges made of tough, reinforced steel that cut through up to 30 nails. Each bit has a fully threaded cone tip that pulls it through the wood, offering best-in-class speed through 2x4s. These bits are ideal for boring clean holes through wood fast to run conduit or pipe. The contoured paddle design also enhances chip removal, contributing to the fast performance. The hex shank with power groove reduces bit slippage in the drill and makes it suitable for use with a variety of drill types, including impact drills. These bits should not be used in a drill press and are not intended for counter boring or doweling.
Features
- Nail-killing wood-boring bit design adds extreme durability to Bosch speed for nail-embedded wood
- Reinforced reamer cutting edges make this bit the first wood-boring bit to drill through nails
- Optimized for wood and some wood with nails combines superior drill speed with engineered nail-cutting durability
- Fully threaded cone tip pulls the bit through wood quickly and effortlessly
- Contoured paddle design increases speed with faster chip removal
- Hex shank improves bit grip and allows use with a variety of drill types
- Premium bit material combined with innovation for great performance and life
Specifications
| Bit Diameter | 1" |
| Bit Material | High Carbon Steel |
| Case Included | No |
| Drilling Depth (in) | 5 |
| Flute Length (in) | 3 |
| Length (in) | 6 |
| Minimum Chuck Size Required | 1/4 in |
| Overall Length (in) | 6 |
| Quick Change Impact Driver Bit | No |
| Self Feeding | Yes |
| Set / Individual | Individual |
| Shank Diameter (in) | 0.25 |
Bosch Nail Strike Wood-Boring Bits are the first wood-boring bits to power through nail-embedded wood. The bit features reamer edges made of tough, reinforced steel that cut through up to 30 nails. Each bit has a fully threaded cone tip that pulls it through the wood, offering best-in-class speed through 2x4s. These bits are ideal for boring clean holes through wood fast to run conduit or pipe. The contoured paddle design also enhances chip removal, contributing to the fast performance. The hex shank with power groove reduces bit slippage in the drill and makes it suitable for use with a variety of drill types, including impact drills. These bits should not be used in a drill press and are not intended for counter boring or doweling.
Features
- Nail-killing wood-boring bit design ? adds extreme durability to Bosch speed for nail-embedded wood
- Reinforced reamer cutting edges ? make this bit the first wood-boring bit to drill through nails
- Optimized for wood and some wood with nails ? combines superior drill speed with engineered nail-cutting durability
- Fully threaded cone tip ? pulls the bit through wood quickly and effortlessly
- Contoured paddle design ? increases speed with faster chip removal
- Hex shank ? improves bit grip and allows use with a variety of drill types
- Premium bit material ? combined with innovation for great performance and life
Specifications
| Bit Diameter | 7/8" |
| Bit Material | High Carbon Steel |
| Case Included | No |
| Drilling Depth (in) | 5 |
| Flute Length (in) | 3 |
| Length (in) | 6 |
| Overall Length (in) | 6 |
| Self Feeding | Yes |
| Set / Individual | Individual |
| Shank Diameter (in) | 0.25 |
Diablo's Starlock bi-metal oscillating blades feature application specific designs that deliver maximum durability and longer life in general purpose cuts: nail-embedded wood, clean wood, metal and plastics. These high-performance blades feature an ultra-hardened cutting edge to deliver up to 5X longer life than standard blades. Curve contact edge creates a pilot for precise, clean plunge cuts with less vibration. Black I.C.E. (Industrial Cooling Element) keeps the teeth cool and build up free for fast, clean cuts. Tool free quick-change interface fits Fein and other Starlock tools; also compatible with most non-Starlock multi-tools.
Cuts
- Hardwoods
- Softwoods
- Metal
- PVC
- Plastics
Features
- Ultra-hardened cutting edge for up to 5x longer life than standard blades
- Curve Contact Edge for precise, clean plunge cuts with less vibration
- Black I.C.E. coated teeth for heat resistance, long life and superior chip evacuation
- 1-3/8 in. cutting depth
- Maximum performance in cordless and corded Fein® and other Starlock tools
- Also compatible with non-Starlock multi-tools from AEG®, Bosch®, Festool®, Makita®, Metabo®, Milwaukee®, Ridgid® and Rockwell®
- Not compatible with Craftsman®, Dewalt®, Dremel®, Hart® or Porter-Cable®
Applications
- General Purpose
Specifications
| Cut Depth (C) | 1-3/8" |
| Pack Quantity | 1 |
| Tooth Design | Bi-Metal |
| Width of Cut | 3-1/2" |
| Interface | Starlock |
Smooth out irregularities in concrete and hardwood floors with this Screen-Bak Durite Q421 SC coarse grit screen floor sanding disc. Its P-graded sharp silicon carbide grit easily cuts into even the hardest floor surfaces, and its open-weave screen design provides extreme resistance to loading during lighter jobs, such as cleaning off scale and rust. This durable sanding disc, which exhibits greater durability than paper or cloth, is waterproof, so you can rinse it off between uses and extend its service life.
Features
- P-graded sharp silicon carbide has excellent cutting and non-loading properties
- Open weave screen has extreme resistance to loading when removing scale, rust and corrosion
- Waterproof; rinse and reuse for longer sanding life
- Good coarse grit choice for floor sanding jobs; more durable than paper or cloth
Applications
- Floor Sanding
- Sanding
Specifications
| Diameter | 17 in. |
| Abrasive | Silicon Carbide |
| Attachment | Center Mount |
| Backing Material | Screen |
| Max Operating Speed Guideline | Determined by back-up pad |
| Abrasive Type | Coated |
| Max Operating Speed RPM | 175 |
| Grit Size | P60 |
| Grade | Coarse |
Smooth out irregularities in concrete and hardwood floors with this Screen-Bak Durite Q421 SC coarse grit screen floor sanding disc. Its P-graded sharp silicon carbide grit easily cuts into even the hardest floor surfaces, and its open-weave screen design provides extreme resistance to loading during lighter jobs, such as cleaning off scale and rust. This durable sanding disc, which exhibits greater durability than paper or cloth, is waterproof, so you can rinse it off between uses and extend its service life.
Features
- P-graded sharp silicon carbide has excellent cutting and non-loading properties
- Open weave screen has extreme resistance to loading when removing scale, rust and corrosion
- Waterproof; rinse and reuse for longer sanding life
- Good coarse grit choice for floor sanding jobs; more durable than paper or cloth
Applications
- Floor Sanding
- Sanding
Specifications
| Diameter | 17 in. |
| Abrasive | Silicon Carbide |
| Attachment | Center Mount |
| Backing Material | Screen |
| Max Operating Speed Guideline | Determined by back-up pad |
| Abrasive Type | Coated |
| Grit Size | P80 |
| Grade | Coarse |
| Max Operating Speed RPM | 175 |
Features
- P-graded sharp silicon carbide has excellent cutting and non-loading properties
- Open weave screen has extreme resistance to loading when removing scale, rust and corrosion
- Waterproof; rinse and reuse for longer sanding life
- Good medium grit choice for floor sanding jobs; more durable than paper or cloth
Applications
- Floor Sanding
- Sanding
Specifications
| Diameter | 17 in. |
| Abrasive | Silicon Carbide |
| Attachment | Center Mount |
| Backing Material | Screen |
| Max Operating Speed Guideline | Determined by back-up pad |
| Abrasive Type | Coated |
| Max Operating Speed RPM | 175 |
| Grade | Medium |
| Grit Size | P100 |
Features
- P-graded sharp silicon carbide has excellent cutting and non-loading properties
- Open weave screen has extreme resistance to loading when removing scale, rust and corrosion
- Waterproof; rinse and reuse for longer sanding life
- Good medium grit choice for floor sanding jobs; more durable than paper or cloth
Applications
- Floor Sanding
- Sanding
Specifications
| Diameter | 17 in. |
| Abrasive | Silicon Carbide |
| Attachment | Center Mount |
| Backing Material | Screen |
| Max Operating Speed Guideline | Determined by back-up pad |
| Abrasive Type | Coated |
| Grit Size | P120 |
| Grade | Medium |
| Max Operating Speed RPM | 175 |
Features
- P-graded sharp silicon carbide has excellent cutting and non-loading properties
- Open weave screen has extreme resistance to loading when removing scale, rust and corrosion
- Waterproof; rinse and reuse for longer sanding life
- Good fine grit choice for floor sanding jobs; more durable than paper or cloth
Applications
- Floor Sanding
- Sanding
Specifications
| Diameter | 17 in. |
| Abrasive | Silicon Carbide |
| Attachment | Center Mount |
| Backing Material | Screen |
| Max Operating Speed Guideline | Determined by back-up pad |
| Abrasive Type | Coated |
| Grit Size | P150 |
| Max Operating Speed RPM | 175 |
| Grade | Fine |
Features
- P-graded sharp silicon carbide has excellent cutting and non-loading properties
- Open weave screen has extreme resistance to loading when removing scale, rust and corrosion
- Waterproof; rinse and reuse for longer sanding life
- Good fine grit choice for floor sanding jobs; more durable than paper or cloth
Applications
- Floor Sanding
- Sanding
Specifications
| Diameter | 17 in. |
| Abrasive | Silicon Carbide |
| Attachment | Center Mount |
| Backing Material | Screen |
| Max Operating Speed Guideline | Determined by back-up pad |
| Abrasive Type | Coated |
| Grade | Fine |
| Grit Size | P180 |
| Max Operating Speed RPM | 175 |
Cuts
- Hardwoods
- Softwoods
- Plywood
Features
- SPEED-TIP™ self-feed design effortlessly pulls the bit with minimal effort and faster holes
- Optimized curved paddle design quickly removes chip build-up for more holes per charge
- Impact Strong™ increases shank stability and durability
- Angled spur cutting edge scores wood for clean holes and reduced blowout
- Maximum performance in cordless and corded impact and drill drivers
Applications
- Drilling clean wood
Specifications
| Diameter | 1-1/2" |
| Length | 6" |
| Pack Quantity | 1 |
| Shank | 1/4" Hex |
Features
- Double wing spurs - Allow for fast, clean hole cutting
- Fast chip removal - Nonstick, polished and coated flutes eliminate costly cleaning time
- Impact-rated shank - Strong enough to use with an impact wrench
- Versatile - One line of Milwaukee® auger bits covers all applications and tools
Specifications
| Bit Diameter | 7/8" |
| Bit Material | Alloy Steel |
| Case Included | No |
| Bit Type | Auger |
| Drilling Depth (in) | 4.0 |
| Length | 6.5 Inches |
| Self Feeding | Yes |
| Shank Diameter (in) | 0.4375 |
| Minimum Chuck Size Required | 1/2 in |
| Flute Length (in) | 4.0 |
| Single / Double Ended | Single |
Milwaukee® SHOCKWAVE? Impact duty titanium drill bits with RED HELIX? are engineered for impacts and drills. Designed with a variable helix ? with an aggressive 35° helix angle which ends at 15°, the impact duty titanium drill bits with RED HELIX? provide Rapid Chip Removal? to limit heat buildup to Stay Sharper Longer?. The 135° split point tip delivers a precision start and prevents walking for fast, accurate holes. Titanium coating can be used in all drilling applications to give you up to 3X life vs. Black Oxide Drill Bits?.
Features
- Titanium coating for up to 3X life vs. black oxide
- SHOCKWAVE? Impact duty, engineered for drills and impacts
- RED HELIX? design for Rapid Chip Removal?
- CHIP BREAKER? decreased heat buildup
Specifications
| Pieces | 4.0 |
| Bit Type | Set |
| Bit Sizes | 1/8", 5/32", 3/16", 1/4" |
| Bit Material | Titanium Coated |
| Drill Bit Length Type | Jobber |
| Case Included | No |
| Quick Change Impact Driver Bit | Yes |
| Surface Coating | TiN (Titanium Nitride) |
| Drill Point Design | Split |
| Recommended Safety Equipment | Safety Glasses |
| Single / Double Ended | Single |
| Package Contents | (1) Each 1/8", 5/32", 3/16", 1/4" drill bits |
Milwaukee® SHOCKWAVE™ Impact duty titanium drill bits with RED HELIX™ are engineered for impacts and drills. Designed with a Variable Helix™ with an aggressive 35° helix angle which ends at 15°, the impact duty titanium drill bits with RED HELIX™ provide Rapid Chip Removal™ to limit heat buildup to Stay Sharper Longer™. The 135° split point tip delivers a precision start and prevents walking for fast, accurate holes. Titanium coating can be used in all drilling applications to give you up to 3X life vs. Black Oxide Drill Bits™.
Features
- Titanium coating for up to 3X life vs. black oxide
- SHOCKWAVE™ Impact duty, engineered for drills and impacts
- RED HELIX™ design for Rapid Chip Removal™
- CHIP BREAKER™ decreased heat buildup
- 135 degree split point for precision start no walking
Specifications
| Bit Diameter | 3/8 In. |
| Bit Material | Titanium Coated |
| Case Included | No |
| Shank Style | Hex |
| Bit Type | Twist |
| Flute Length (in) | 2.87 |
| Length | 4.65 Inches |
| Recommended Safety Equipment | Safety Glasses |
| Shank Diameter (in) | 0.25 |
| Color Coded | No |
| Etched / Stamped Size Identification | Yes |
| Single / Double Ended | Single |
Milwaukee® SHOCKWAVE™ Impact duty titanium drill bits with RED HELIX™ are engineered for impacts and drills. Designed with a Variable Helix™ with an aggressive 35° helix angle which ends at 15°, the impact duty titanium drill bits with RED HELIX™ provide Rapid Chip Removal™ to limit heat buildup to Stay Sharper Longer™. The 135° split point tip delivers a precision start and prevents walking for fast, accurate holes. Titanium coating can be used in all drilling applications to give you up to 3X life vs. Black Oxide Drill Bits™.
Features
- Titanium coating for up to 3X life vs. black oxide
- SHOCKWAVE™ Impact duty, engineered for drills and impacts
- RED HELIX™ design for Rapid Chip Removal™
- CHIP BREAKER™ decreased heat buildup
- 135 degree split point for precision start no walking
Specifications
| Bit Diameter | 1/2 In. |
| Bit Material | Titanium Coated |
| Case Included | No |
| Shank Style | Hex |
| Bit Type | Twist |
| Flute Length (in) | 3.32 |
| Length | 5.12 Inches |
| Recommended Safety Equipment | Safety Glasses |
| Shank Diameter (in) | 0.25 |
| Color Coded | No |
| Etched / Stamped Size Identification | Yes |
| Single / Double Ended | Single |
Milwaukee® SHOCKWAVE™ Impact duty titanium drill bits with RED HELIX™ are engineered for impacts and drills. Designed with a Variable Helix™ with an aggressive 35° helix angle which ends at 15°, the impact duty titanium drill bits with RED HELIX™ provide Rapid Chip Removal™ to limit heat buildup to Stay Sharper Longer™. The 135° split point tip delivers a precision start and prevents walking for fast, accurate holes. Titanium coating can be used in all drilling applications to give you up to 3X life vs. Black Oxide Drill Bits™.
Features
- Titanium coating for up to 3X life vs. black oxide
- SHOCKWAVE™ Impact duty, engineered for drills and impacts
- RED HELIX™ design for Rapid Chip Removal™
- CHIP BREAKER™ decreased heat buildup
- 135 degree split point for precision start no walking
Specifications
| Bit Diameter | 1/4 In. |
| Bit Material | Titanium Coated |
| Case Included | No |
| Shank Style | Hex |
| Bit Type | Twist |
| Flute Length (in) | 2.460000 |
| Length | 4.13 Inches |
| Recommended Safety Equipment | Safety Glasses |
| Shank Diameter (in) | 0.250000 |
| Color Coded | No |
| Etched / Stamped Size Identification | Yes |
| Single / Double Ended | Single |
The MILWAUKEE® SHOCKWAVE Impact Duty™ 15PC RED HELIX™ Titanium Drill Bit Set is engineered for extreme durability and long life. The QUAD EDGE™ tip delivers a precision start and features four cutting edges to create smaller chips for faster material removal and less heat leading to improved performance. Designed with a VARIABLE HELIX™ flute that begins with an aggressive 35° helical angle and ends at 15° for rapid chip removal. The bits also feature an internal thicker tapered web that greatly increases strength, reducing premature breakage. Ideal for various applications including but not limited to wood, plastics, and metals. MILWAUKEE® RED HELIX™ Titanium Drill Bits provide up to 5X life vs. black oxide drill bits. Set is organized in a customizable accessory case designed for use in PACKOUT™.
Features
- RED HELIX™ Technology combines QUAD EDGE™ tip, VARIABLE HELIX™ flute, and thicker tapered web
- QUAD EDGE Tip™ stays sharper longer
- VARIABLE HELIX™ flute designed for rapid chip removal
- Thicker tapered web design increases bit strength
- Titanium Coated for 5X Life vs. Black Oxide Drill Bits
- 1/4" hex shank for use with Impact Drivers and Drill Drivers
- Ideal for Metal, Wood, & Plastics
- Laser etched size for easy identification
- Customizable accessory case is designed for use in PACKOUT™
Specifications
| Pieces | 15 |
| Bit Type | Twist |
| Bit Sizes | 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" |
| Bit Material | Titanium Coated |
| Drill Bit Length Type | Jobber |
| Case Included | Yes |
| Recommended Safety Equipment | Safety Glasses, Work Gloves |
| Single / Double Ended | Single |
Diablo's high-performance carbide teeth hole cutters deliver 50-times longer cutting life, faster cutting performance and maximum productivity. An optimized carbide tooth geometry provides fast, burr-free holes that require virtually no rework. The depth stop collar maximizes productivity by providing a controlled drilling experience and limiting drilling depth. The combination of a tool-free plug ejection system and spring-loaded plug eject Cobalt pilot bit makes plug removal fast and efficient. Diablo's hole cutters are compatible with Diablo's SnapLock™ PLUS mandrel resulting in quick, easy and effortless cup changes.
Applications
- Drills holes in metal
Cuts
- Metal
- Sheet
- Electrical Panels
- Steel Studs
Features
- Up to 50x longer cutter life in metal cutting versus standard bi-metal hole saws
- Depth Stop Collar for controlled and efficient hole drilling
- Plug Eject Cobalt Pilot Bit prevents overfeeding and allows for easy removal of plugs
- Tool-free plug ejection for fast material removal
- Compatible with Diablo's SnapLock™ PLUS mandrel for quick and easy cup changes with no down time
- Set includes three cups (7/8 in., 1-1/8 in., & 1-3/8 in.), one 7/16" SnapLock™ PLUS mandrel and two plug eject Cobalt pilot bits
- Drills up to 1/4 in. metals, including sheet metals, electrical panels & steel studs
- For use with a drill press or hand-held drill
Specifications
| Diameter | 7/8" to 1-3/8" |
| Length | 1/4" |
| Pack Quantity | 6 |
| Shank | Diablo Mandrel |
Diablo's Starlock carbide oscillating blades feature application specific designs that deliver extreme durability and superior cutting life in general purpose cuts: nail-embedded wood, clean wood, metal and plastics. High-performance carbide teeth deliver an unmatched up to 50X longer cutting life versus standard bi-metal blades. Curve contact edge creates a pilot for precise, clean plunge cuts with less vibration. An optimized blade design and Black I.C.E. (Industrial Cooling Element) keeps the teeth cool and build up free for fast, clean cuts. Tool free quick-change interface fits Fein and other Starlock tools; also compatible with non-Starlock multi-tools.
Cuts
- Nail Embedded Wood
- Clean Wood
- Metal
- PVC
- Plastics
Applications
- General Purpose
Features
- High performance carbide for greater durability and up to 50X longer life versus standard bi-metal blades
- Curve Contact Edge for precise, clean plunge cuts with less vibration
- Black I.C.E. coated teeth for heat resistance, long life and superior chip evacuation
- 1-3/16 in. cutting depth
- Maximum performance in cordless and corded Fein® and other Starlock tools
- Also compatible with non-Starlock multi-tools from AEG®, Bosch®, Festool®, Makita®, Metabo®, Milwaukee®, Ridgid® and Rockwell®
- Not compatible with Craftsman®, Dewalt®, Dremel®, Hart® or Porter-Cable®
Specifications
| Cut Depth (C) | 1-3/16" |
| Pack Quantity | 1 |
| Tooth Design | Carbide |
| Width of Cut | 3-1/8" |
| Interface | Starlock |
The MILWAUKEE® SHOCKWAVE Impact Duty™ Magnetic Nut Drivers are engineered with the Most Durable Magnet to stand up to heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76™ steel to control hardness for extended bit life. The optimized SHOCK ZONE™ absorbs peak torque and prevents bit breakage. Our magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.
Features
- Impact Duty Magnet prevents magnet loosening over time
- Magnetic nut driver holds screws securely during application set-up
- Optimized SHOCK ZONE™ absorbs peak torque and prevents breakage
- Color-coded bands aid with selecting the right size nut driver
- CUSTOM ALLOY76™ Steel is engineered to extend bit life
- 6" Magnetic nut driver allows for extended reach and tight-access applications
- Chamfered edge for maximum screw-head engagement
- Improved hex geometry for best fit and reduced stripping
- Available in lengths - insert, 1-7/8", 2-9/16", 6"
- Designed for heavy-duty impact applications
- Designed for use with Impact Drivers and Drill Drivers
Specifications
| Bit Type | Driver |
| Drive Design | Hex |
| Bit Material | Alloy Steel |
| Bit Sizes | 5/16 in |
| Pieces | 1 |
| Shank Diameter | 1/4 in hex |
| Set / Individual | Individual |
| Minimum Chuck Size Required | 1/4 in |
| Length | 6.0 Inches |
| Material | Alloy Steel |
| Screwdriver Bit Type | Nutsetter |
| Drive Type | Magnet Nut Driver |
The MILWAUKEE® SHOCKWAVE Impact Duty™ Magnetic Nut Drivers are engineered with the Most Durable Magnet to stand up to heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76™ steel to control hardness for extended bit life. The optimized SHOCK ZONE™ absorbs peak torque and prevents bit breakage. Milwaukee magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.
Features
- Impact Duty Magnet prevents magnet loosening over time
- Magnetic nut driver holds screws securely during application set-up
- Optimized SHOCK ZONE™ absorbs peak torque and prevents breakage
- Color-coded bands aid with selecting the right size nut driver
- CUSTOM ALLOY76™ Steel is engineered to extend bit life
- 6" Magnetic nut driver allows for extended reach and tight-access applications
- Chamfered edge for maximum screw-head engagement
- Improved hex geometry for best fit and reduced stripping
- Available in lengths - insert, 1-7/8", 2-9/16", 6"
- Designed for heavy-duty impact applications
- Designed for use with Impact Drivers and Drill Drivers
Specifications
| Bit Type | Driver |
| Drive Design | Hex |
| Bit Material | Alloy Steel |
| Bit Sizes | 1/4 in |
| Pieces | 1 |
| Shank Diameter | 1/4 in hex |
| Set / Individual | Individual |
| Minimum Chuck Size Required | 1/4 in |
| Length | 6.0 Inches |
| Material | Alloy Steel |
| Screwdriver Bit Type | Nutsetter |
| Drive Type | Magnet Nut Driver |
