S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Power Tool Accessories
Kinnunen offers an extensive selection of power tool accessories to help you get the most out of your tools. From batteries and chargers to jobsite radios, power tool parts and more, we have everything you need to maximize your productivity. Whatever the task at hand, Kinnunen has the power tool accessories you need to get the job done right.Our customer service professionals receive the best industry training available. So, if you have any questions about what accessories are right for your power tool, we have an answer. Simply call us at 1-800-432-8979 or fill out our contact form.
Features
- Rip fence for use with most DEWALTcircular saws
Specifications
| Length | 6.063 in |
| Width | 1.313 in |
| Height | 12.375 in |
| Weight | 0.8 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | No |
| Warranty | 3LW1YS90D |
| Claims Needed | No |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Use With | Circular Saws |
| Product Primary Material | Metal |
Diablo's revolutionary, most complete range of SDS-Plus and SDS-Max Rebar Demon™ 4-cutter full-carbide head hammer drill bits are the only bits designed to be the most durable, fastest and coolest solutions on the market. The Rebar Demon bits feature up to 2X more Dura-Carbide to withstand up to 1800°F of intense heat whereas standard bits fail at 800°F. Diablo's impact resistant 4-cutter full-carbide head withstands the stress of high-powered hammer drills and the impact of rebar by taking small bites of rebar to deliver controlled carbide wear, reduced vibration and up to 7X longer life. Produced with Tri-Metal Fusion Welding, the full-carbide head resists heat and prevents breakage in extreme impact situations. Precision Tip delivers the stability and accuracy required to produce fast, precise holes in reinforced concrete for anchor setting.
Cuts
- Reinforced Concrete
- Concrete
- Rebar
- Brick/Block
Features
- Up to 7X longer life versus standard 2-cutter hammer drill bits
- Diablo made Dura-Carbide™ features up to 2X more carbide that withstands up to 1800°F of intense heat to combat rebar hits versus standard bits that fail at 800°F
- Impact Resistant 4-Cutter Full Carbide Head extracts smaller bites of rebar for controlled, consistent carbide wear and reduced vibration to deliver fast, precise holes
- Tri-Metal Fusion Welding features up to 3X stronger weld to keep the full carbide head intact during extreme impact such as rebar
- Precision Tip delivers stability and accuracy required for fast, precise holes
- Optimized flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability
- Wear mark indicator ensures precise hole making
- Optimized for maximum performance in corded and cordless SDS Plus or SDS Max rotary hammers
Applications
- Reinforced concrete and concrete
Specifications
| Diameter | 1/4" |
| Length | 4" |
| Number of Cutters | 4 |
| Pack Quantity | 25 |
| Shank | SDS Plus |
| Head Type | Full Carbide Head |
| Working Length | 2" |
Features
- For use with chucks 48-66-2000, 48-66-2040, 48-66-2080 and 48-66-2085
- Use with key holder 48-66-4020
- Great value
- Easy replacement
Specifications
| Drive Size | Multiple Drive Size Set |
| Pilot Diameter | 0.5 in |
| Chuck Key Type | L-Shaped |
| Handle Length | 5.0 in |
| Chuck Key Storage | No |
| Material | metal |
| Color / Finish | black |
Specifications
| Length | 10 in |
| Width | 1 in |
| Height | 1 in |
| Weight | 0.14 lbs |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Features
- Self-retracting guide sleeve protects fingers and holds screws in place while eliminating wobbling and slipping Quickly changes between 6 drivers to increase speed Stores all 6 drivers in 1 holder to eliminate the frustration of losing bits Includes most common geometries which is ideal for applications where multiple geometries are needed
Specifications
| Length | 7.8 in |
| Width | 1.9 in |
| Height | 0.8 in |
| Weight | 0.12 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Prop 65 Generic Warning | No |
| Warranty | MWC |
| Claims Needed | No |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Magnetic | Yes |
| Product Primary Material | Metal |
Features
- Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool
- Precision formed
- Great value
- Easy replacement
Specifications
| Drive Size | Multiple Drive Size Set |
| Pilot Diameter | 0.500000 in |
| Chuck Key Type | L-Shaped |
| Handle Length | 5.000 in |
| Chuck Key Storage | No |
| Material | metal |
| Color / Finish | black |
The MILWAUKEE® SHOCKWAVE Impact Duty? 80PC Driver Bit Set is engineered to be the Most Durable, Best Fitting driver bits on the market. The WEAR GUARD TIP? delivers increased wear resistance which protects the impact bit's fit over the life of the bit. The SHOCK ZONE? is optimized for each tip type and length of driver bit in the set to absorb peak torque and prevent breaking. The driver bits have CUSTOM ALLOY76? for a customized steel and heat treatment per tip type to extend the life of the user's driver bits, providing up to 50X life versus other impact driver bits on the market. The Milwaukee® SHOCKWAVE Impact Duty? driver bits are built to provide users with extreme durability for the most demanding applications. The set is organized in a customizable accessory case designed for use in PACKOUT?.
Features
- WEAR GUARD TIP? protects fit over the life of the bit
- Optimized SHOCK ZONE? absorbs peak torque and prevents breaking
- CUSTOM ALLOY76? Steel is engineered to extend bit life
- Precise fit, custom machined tip prevents stripping and reduces wobble
- SHOCK ZONES? are optimized in both length and width across all tip types for best performance across tip types
- Laser hardening at the tip creates an outer protective shield for improved wear resistance
- Customized geometry and heat treatment per tip type for best performance across tip types
- Up to 50X Life vs other impact bits
- Laser etched size for easy identification
- Includes SHOCKWAVE Impact Duty? nut drivers with the most durable magnet for longer life in tough applications
- Customizable accessory case is designed for use in PACKOUT?
- Designed for use with Impact Drivers and Drill Drivers
Specifications
| Bit Type | Screwdriver |
| Package Contents | (1) Compact Magnetic Bit Holder; (61) 1" Insert Bits: (3) P1, (12) P2, (2) PR2, (3) P3, (2) SQ1, (6) SQ2, (2) SQ3, (2) T10, (2) T15, (5) T20, (8) T25, T27, (2) T30, SL#8, SL#10, Hex 3/32". Hex 7/64", Hex 1/8", Hex 9/64", Hex 5/32", Hex 3/16", Hex 3MM, Hex 4MM, Hex 5MM, (9) 2" Power Bits: (2) P2, P3, (2) SQ2, SQ3, T20, (2) T25, (3) 3-1/2" Power Bits: P2, SQ2, T25, (2) Double Ended Bits: P2/T25, P2/SQ2, (3) 1-7/8" Nut Drivers: 1/4", 5/16", 3/8", (1) 1/4" to 3/8" Socket Adapter |
| Drive Design | Combination |
| Bit Material | Alloy Steel |
| Bit Sizes | 1" Insert Bits: P1, P2, PR2, P3, SQ1, SQ2, SQ3, T10, T15, T20, T25, T27, T30, SL#8, SL#10, Hex 3/32", Hex 7/64", Hex 1/8", Hex 9/64", Hex 5/32", Hex 3/16", Hex 3MM, Hex 4MM, Hex 5MM; 2" Power Bits: P2, P3, SQ2, SQ3, T20, T25; 3-1/2" Power Bits: P2, SQ2, T25; Double Ended Bits: P2/T25, P2/SQ2; 1-7/8" Nut Drivers: 1/4", 5/16", 3/8" |
| Pieces | 80 |
| Shank Diameter | 1/4 in hex |
| Set / Individual | Set |
| Minimum Chuck Size Required | 1/4 in |
| Material | Alloy Steel |
| Screwdriver Bit Type | Multi-Use |
The MILWAUKEE® SHOCKWAVE™ Impact Duty 55PC Driver Bit Set is engineered to be the Most Durable, Best Fitting Driver Bit Driver Bits on the market. The WEAR GUARD TIP™ delivers increased wear resistance, which protects the impact bit's fit over the life of the bit. The SHOCKZONE™ is optimized for each tip type and length of Driver Bit in the set to absorb peak torque and prevent breaking. The Driver Bit Driver Bits are made from CUSTOM ALLOY76™ steel and a proprietary heat treatment process to extend bit life, providing up to 50X life versus other impact Driver Bit Driver Bits on the market. The MILWAUKEE® SHOCKWAVE™ Impact Duty Driver Bit Driver Bits are built to provide users with extreme durability for the most demanding applications. The set is organized in a customizable accessory case designed for use in PACKOUT™.
Features
- Ultimate Fit
- Most durable, SHOCKZONE™ shank absorbs peak torque
- Long Lasting Tip, Wear Guard™
- Customized Tip Geometry, Less Stripping
- SHOCKZONE™ shanks are optimized per tip type to prevent breaking
- Custom heat treat for longer bit life
- Laser etched for easy size identification
- Customible accessory case is designed to fit in PACKOUT™ Organizers
- Designed for use with impact drivers and drill drivers
Specifications
| Bit Type | Screwdriver |
| Package Contents | (1) Compact Magnetic Bit Holder; (1) 3" Magnetic Bit Holder; (1) 6" Magnetic Bit Holder; (46) 1" Insert Bits: (2) P1; (8) P2; PR2; (2) P3; SQ1; (3) SQ2; (2) SQ3; T10; T15; (3) T20; (5) T25; T27; T30; T40; SL #8; (2) SL #10; Hex 3 mm; Hex 4 mm; Hex 5 mm; Hex 6 mm; Hex 3/32"; Hex 7/64"; Hex 1/8"; Hex 9/64"; Hex 5/32"; Hex 3/16"; Hex 1/4"; (3) Insert Magnetic Nut Drivers: 1/4"; 5/16"; 3/8"; (3) 2" Socket Adapters: 1/4" to 1/4" Hex to Square; 1/4" to 3/8" Hex to Square; 1/4" to 1/2" Hex to Square |
| Drive Design | Combination |
| Bit Material | Alloy Steel |
| Bit Sizes | 1" Insert Bits: P1, P2, PR2, P3, SQ1, SQ2, SQ3, T10, T15, T20, T25, T27, T30, T40, SL#8, SL#10, Hex 3 mm, Hex 4 mm, Hex 5 mm, Hex 6 mm, Hex 3/32", Hex 7/64", Hex 1/8", Hex 9/64", Hex 5/32", Hex 3/16", Hex 1/4"; Insert Magnetic Nut Drivers: 1/4", 5/16", 3/8" |
| Pieces | 55 |
| Shank Diameter | 1/4 in hex |
| Set / Individual | Set |
| Minimum Chuck Size Required | 1/4 in |
| Material | Alloy Steel |
| Screwdriver Bit Type | Multi-Use |
Features
- For use with chucks 48-66-0240, 48-66-0805 and 48-66-0806
- Use with key holder 48-66-4040
- For cordless tools
- Easy replacement
Specifications
| Drive Size | 3/8 in |
| Pilot Diameter | 0.25 in |
| Chuck Key Type | L-Shaped |
| Handle Length | 2.0 in |
| Chuck Key Storage | No |
| Material | steel |
| Color / Finish | Silver |
Features
- Ultimate Fit
- Most durable, SHOCKZONE™ shank absorbs peak torque
- Long Lasting Tip, Wear Guard™
- Customized Tip Geometry, Less Stripping
- SHOCKZONE™ shanks are optimized per tip type to prevent breaking
- Custom heat treat for longer bit life
- Laser etched for easy size identification
- Designed for use with impact Driver Driver Bits and drill Driver Driver Bits
Specifications
| Bit Type | Screwdriver |
| Package Contents | (25) SHOCKWAVE 2" Impact Torx T30 Power Bits |
| Drive Design | Hex |
| Bit Material | Alloy Steel |
| Bit Sizes | T30 |
| Pieces | 25.0 |
| Shank Diameter | 1/4 in hex |
| Set / Individual | Set |
| Minimum Chuck Size Required | 1/4 in |
| Length | 2.0 Inches |
| Material | Proprietary Steel |
| Screwdriver Bit Type | Power |
| Drive Type | Torx |
Specifications
| Length | 5.5 in |
| Width | 3 in |
| Height | 0.75 in |
| Weight | 0.28 lbs |
| Power Source | NON-ENERGY USING |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Individual Vs. Set (Syndigo) | SET |
Features
- For use with chucks 48-66-1360, 48-66-1370 and 48-66-1381
- Use with key holder 48-66-4040
- Great value
- Easy replacement
Specifications
| Drive Size | Multiple Drive Size Set |
| Pilot Diameter | 0.5 in |
| Chuck Key Type | L-Shaped |
| Handle Length | 5.0 in |
| Chuck Key Storage | No |
| Material | Metal |
| Color / Finish | Black |
Features
- For use with chucks 48-66-0795 and 48-66-0797
- Use with key holder 48-66-4040
- Great value
- Easy replacement
Specifications
| Drive Size | Multiple Drive Size Set |
| Pilot Diameter | 0.5 in |
| Chuck Key Type | L-Shaped |
| Handle Length | 5.0 in |
| Chuck Key Storage | No |
| Material | Metal |
| Color / Finish | Black |
Features
- For use with chucks 48-66-0070, 48-66-0104 and 48-66-0230
- Use with key holder 48-66-4080.
- Great value
- Easy replacement
Specifications
| Drive Size | 1/4 in |
| Pilot Diameter | 0.25 in |
| Chuck Key Type | L-Shaped |
| Handle Length | 1.0 in |
| Chuck Key Storage | No |
| Material | Metal |
| Color / Finish | Black |
Diablo's revolutionary, most complete range of SDS-Plus and SDS-Max Rebar Demon™ 4-cutter full-carbide head hammer drill bits are the only bits designed to be the most durable, fastest and coolest solutions on the market. The Rebar Demon bits feature up to 2X more Dura-Carbide to withstand up to 1800°F of intense heat whereas standard bits fail at 800°F. Diablo's impact resistant 4-cutter full-carbide head withstands the stress of high-powered hammer drills and the impact of rebar by taking small bites of rebar to deliver controlled carbide wear, reduced vibration and up to 7X longer life. Produced with Tri-Metal Fusion Welding, the full-carbide head resists heat and prevents breakage in extreme impact situations. Precision Tip delivers the stability and accuracy required to produce fast, precise holes in reinforced concrete for anchor setting.
Cuts
- Reinforced Concrete
- Concrete
- Rebar
- Brick/Block
Features
- Up to 7X longer life versus standard 2-cutter hammer drill bits
- Diablo made Dura-Carbide™ features up to 2X more carbide that withstands up to 1800°F of intense heat to combat rebar hits versus standard bits that fail at 800°F
- Impact Resistant 4-Cutter Full Carbide Head extracts smaller bites of rebar for controlled, consistent carbide wear and reduced vibration to deliver fast, precise holes
- Tri-Metal Fusion Welding features up to 3X stronger weld to keep the full carbide head intact during extreme impact such as rebar
- Precision Tip delivers stability and accuracy required for fast, precise holes
- Optimized flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability
- Wear mark indicator ensures precise hole making
- Optimized for maximum performance in corded and cordless SDS Plus or SDS Max rotary hammers
Applications
- Reinforced concrete and concrete
Specifications
| Diameter | 3/16" |
| Length | 6" |
| Number of Cutters | 4 |
| Pack Quantity | 25 |
| Shank | SDS Plus |
| Head Type | Full Carbide Head |
| Working Length | 4" |
Features
- Extreme durability and impact resistance for up to 50X longer life versus standard bits
- Torque Resistant Design for less stress on the tip
- Optimized tip design reduces wear, minimizes breakage and prevents slippage
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 1" |
| Pack Quantity | 2 |
| Shank | 1/4" Hex |
| Screwdriver Head | T10 |
| Screwdriver Style | Torx |
Features
- Easily extend reach of drill in hard to access, confined spaces
- Universal design fits all insert and drive bits
- Permanent magnet eliminates wobbling by securely gripping screws and hex nuts
- Torque Resistant Design for less stress on the holder and the bit
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Optimized heat treatment process strengthens the adapter for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 2-3/8" |
| Pack Quantity | 1 |
| Shank | 1/4" Hex |
The MILWAUKEE® OPEN-LOK™ 1-3/8" Carbide Teeth Metal Oscillating Multi-Tool Blades are designed for metal cutting in screws, bolts, nails, and more. Carbide Teeth blades last up to 50X longer than standard bi-metal blades and can be used in a wide range of materials while maintaining longer blade life. These blades feature a reinforced Universal Fit OPEN-LOK™ anchor for better strength & control and allow for quick blade changes across 100+ multi-tools. Not compatible with Starlock tools. MILWAUKEE® oscillating multi-tool blades are designed and made in the USA with global materials.
Features
- Carbide Teeth for up to 50x longer life vs bi-metal blades
- TITANIUM ENHANCED™ to extend blade life
- Reinforced Universal Fit OPEN-LOK™ anchor for better strength & control
- Universal Fit OPEN-LOK™ Anchor fits all major brands of non-starlock tools
- For use in Metal applications: screws, bolts, metal pipe, nails, and more
- Protective black oxide coating for corrosion resistance
- Long lasting laser etching for clear and easy blade identification
- Cut-away blade body shape for fast plunge cuts
- Made in the USA with global materials
- 1-3/8" Cutting Width
- 1-1/2" Max Plunge Depth
- 1 Pack
Specifications
| Blade Length | 1.5 in |
| Blade Cutting Material | Carbide Tipped |
| Blade Thickness | 0.042 in |
| Package Contents | (1) 1-3/8" Titanium Carbide Teeth Metal Blade |
| Color / Finish | Black |
| Blade Width | 1.375 in |
| Saw Blade Type | Oscillating Saw |
| Brand / Model Compatibility | Universal |
| Blade Material | Carbide |
Features
- Extreme durability and impact resistance for up to 50X longer life versus standard bits
- Torque Resistant Design for less stress on the tip
- Optimized tip design reduces wear, minimizes breakage and prevents slippage
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 1" |
| Pack Quantity | 5 |
| Shank | 1/4" Hex |
| Screwdriver Head | SQ2 |
| Screwdriver Style | Square |
SDS Plus 2 Cutter Drill Bits have a strong tapered core to help resist flute breaks, especially when drilling deep holes. For optimal drilling speeds, the two-stage flute design features a variable helix pattern that quickly moves debris away from the contact zone. Plus, the two sharp, carbide-cutting edges deliver clean, round holes for secure anchor installation. These bits are made in Germany and are GUARANTEED TOUGH - so tough that we are offering a NO BREAK GUARANTEE. If you have our bits, we have your back.
Features
- Strong core: Tapered core for bit strength and maximum durability, especially when drilling deep holes
- Aggressive material removal: Two stage flute design with variable helix pattern allows for efficient debris removal
- Clean, round holes: Two sharp cutting edges for true holes
- Wear mark indicator: For accurate diameter of holes
- NO BREAK GUARANTEE: If your bit fails for any reason while the wear mark is still visible, we'll replace it (excludes: DW5400, DW5401, DW5401B25)
Specifications
| Length | 0.375 in |
| Width | 0.375 in |
| Height | 6 in |
| Weight | 0.088 lbs |
| Product Diameter Us | 3/16 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Disclaimer | For more details visit www.DEWALT.com/warranty |
| Warranty | MWC |
| Claims Needed | No |
| Bit Size | 3/16" x 4-1/2" x 6-1/2" |
| Bit Type | Masonry |
| Case Type | N/A (no case) |
| Chuck Type | SDS-Plus |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Recommended Safety Equipment | safety glasses |
| Product Primary Material | Carbide Tipped |
Features
- Strong Core: Tapered core for bit strength and maximum durability, especially when drilling deep holes
- Aggressive material removal: Two stage flute design with variable helix pattern allows for efficient debris removal
- Clean, round holes: Two sharp cutting edges for true holes
- Wear mark indicator: For accurate diameter of holes
- NO BREAK GUARANTEE: If your bit fails for any reason while the wear mark is still visible, we'll replace it (excludes: DW5400, DW5401, DW5401B25)
- DEWALT carbide tip design maximizes carbide surface contact for longer bit life
Specifications
| Length | 0.375 in |
| Width | 0.375 in |
| Height | 6 in |
| Weight | 0.145 lbs |
| Product Diameter Us | 3/8 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | No |
| Warranty | MWC |
| Bit Size | 3/8 In. x 4 In. x 6 In. |
| Bit Type | Masonry |
| Case Type | Plastic |
| Chuck Type | SDS-Plus |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Recommended Safety Equipment | Safety glasses |
| Product Primary Material | Carbide Tipped |
The MILWAUKEE® SHOCKWAVE Impact Duty™ Magnetic Nut Drivers are engineered with the Most Durable Magnet to withstand heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76™ steel to control hardness for extended bit life. The optimized SHOCK ZONE™ absorbs peak torque and prevents bit breakage. Milwaukee magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.
Features
- IMPACT DUTY™ Magnet prevents magnet loosening over time
- Magnetic nut driver holds screws securely during application set-up
- Optimized SHOCK ZONE™ absorbs peak torque and prevents breakage
- Color-coded bands aid with selecting the right size nut driver
- CUSTOM ALLOY76™ Steel is engineered to extend bit life
- Chamfered edge for maximum screw-head engagement
- Improved hex geometry for best fit and reduced stripping
- Designed for heavy-duty impact applications
- Designed for use with Impact Drivers and Drill Drivers
Specifications
| Bit Type | Driver |
| Package Contents | (1) SHOCKWAVE 3/8" x 2-9/16" Magnetic Nut Driver |
| Drive Design | Hex |
| Bit Material | Alloy Steel |
| Bit Sizes | 3/8 in |
| Pieces | 1 |
| Shank Diameter | 1/4 in hex |
| Set / Individual | Individual |
| Minimum Chuck Size Required | 1/4 in |
| Length | 2.5625 Inches |
| Material | Alloy Steel |
| Screwdriver Bit Type | Nutsetter |
| Drive Type | Magnet Nut Driver |
The MILWAUKEE® SHOCKWAVE Impact Duty™ Magnetic Nut Drivers are engineered with the Most Durable Magnet to withstand heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76™ steel to control hardness for extended bit life. The optimized SHOCK ZONE™ absorbs peak torque and prevents bit breakage. Milwaukee magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.
Features
- IMPACT DUTY™ Magnet prevents magnet loosening over time
- Magnetic nut driver holds screws securely during application set-up
- Optimized SHOCK ZONE™ absorbs peak torque and prevents breakage
- Color-coded bands aid with selecting the right size nut driver
- CUSTOM ALLOY76™ Steel is engineered to extend bit life
- Chamfered edge for maximum screw-head engagement
- Improved hex geometry for best fit and reduced stripping
- Designed for heavy-duty impact applications
- Designed for use with Impact Drivers and Drill Drivers
Specifications
| Bit Type | Driver |
| Package Contents | (1) SHOCKWAVE 5/16" x 2-9/16" Magnetic Nut Driver |
| Drive Design | Hex |
| Bit Material | Alloy Steel |
| Bit Sizes | 5/16 in |
| Pieces | 1 |
| Shank Diameter | 1/4 in hex |
| Set / Individual | Individual |
| Minimum Chuck Size Required | 1/4 in |
| Length | 2.5625 Inches |
| Material | Alloy Steel |
| Screwdriver Bit Type | Nutsetter |
| Drive Type | Magnet Nut Driver |
The MILWAUKEE® SHOCKWAVE Impact Duty™ Magnetic Nut Drivers are engineered with the Most Durable Magnet to withstand heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76™ steel to control hardness for extended bit life. The optimized SHOCK ZONE™ absorbs peak torque and prevents bit breakage. Milwaukee magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.
Features
- Impact Duty Magnet prevents magnet loosening over time
- Magnetic nut driver holds screws securely during application set-up
- Optimized SHOCK ZONE™ absorbs peak torque and prevents breakage
- Color-coded bands aid with selecting the right size nut driver
- CUSTOM ALLOY76™ Steel is engineered to extend bit life
- Chamfered edge for maximum screw-head engagement
- Improved hex geometry for best fit and reduced stripping
- Designed for heavy-duty impact applications
- Designed for use with Impact Drivers and Drill Drivers
Specifications
| Bit Type | Driver |
| Package Contents | (1) SHOCKWAVE 1/4" x 2-9/16" Magnetic Nut Driver |
| Drive Design | Hex |
| Bit Material | Alloy Steel |
| Bit Sizes | 1/4 in |
| Pieces | 1 |
| Shank Diameter | 1/4 in hex |
| Set / Individual | Individual |
| Minimum Chuck Size Required | 1/4 in |
| Length | 2.5625 Inches |
| Material | Alloy Steel |
| Screwdriver Bit Type | Nutsetter |
| Drive Type | Magnet Nut Driver |
The MILWAUKEE® SHOCKWAVE Impact Duty™ Magnetic Nut Drivers are engineered with the Most Durable Magnet to withstand heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76™ steel to control hardness for extended bit life. The optimized SHOCK ZONE™ absorbs peak torque and prevents bit breakage. Milwaukee magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.
Features
- Impact Duty Magnet prevents magnet loosening over time
- Magnetic nut driver holds screws securely during application set-up
- Optimized SHOCK ZONE™ absorbs peak torque and prevents breakage
- Color-coded bands aid with selecting the right size nut driver
- CUSTOM ALLOY76™ Steel is engineered to extend bit life
- Chamfered edge for maximum screw-head engagement
- Improved hex geometry for best fit and reduced stripping
- Designed for heavy-duty impact applications
- Designed for use with Impact Drivers and Drill Drivers
Specifications
| Bit Type | Driver |
| Package Contents | (1) SHOCKWAVE 7/16" x 2-9/16" Magnetic Nut Driver |
| Drive Design | Hex |
| Bit Material | Alloy Steel |
| Bit Sizes | 7/16 in |
| Pieces | 1 |
| Shank Diameter | 1/4 in hex |
| Set / Individual | Individual |
| Minimum Chuck Size Required | 1/4 in |
| Length | 2.5625 Inches |
| Material | Alloy Steel |
| Screwdriver Bit Type | Nutsetter |
| Drive Type | Magnet Nut Driver |
The MILWAUKEE® SHOCKWAVE Impact Duty™ Magnetic Nut Drivers are engineered with the Most Durable Magnet to withstand heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76™ steel to control hardness for extended bit life. The optimized SHOCK ZONE™ absorbs peak torque and prevents bit breakage. Milwaukee magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.
Features
- IMPACT DUTY™ Magnet prevents magnet loosening over time
- Magnetic nut driver holds screws securely during application set-up
- Optimized SHOCK ZONE™ absorbs peak torque and prevents breakage
- Color-coded bands aid with selecting the right size nut driver
- CUSTOM ALLOY76™ Steel is engineered to extend bit life
- Chamfered edge for maximum screw-head engagement
- Improved hex geometry for best fit and reduced stripping
- Designed for heavy-duty impact applications
- Designed for use with Impact Drivers and Drill Drivers
Specifications
| Bit Type | Driver |
| Package Contents | (1) SHOCKWAVE 1/4" x 1-7/8" Magnetic Nut Driver |
| Drive Design | Hex |
| Bit Material | Alloy Steel |
| Bit Sizes | 1/4 in |
| Pieces | 1 |
| Shank Diameter | 1/4 in hex |
| Set / Individual | Individual |
| Minimum Chuck Size Required | 1/4 in |
| Length | 1.875 Inches |
| Material | Alloy Steel |
| Screwdriver Bit Type | Nutsetter |
| Drive Type | Magnet Nut Driver |
The MILWAUKEE® SHOCKWAVE Impact Duty™ Magnetic Nut Drivers are engineered with the Most Durable Magnet to withstand heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76™ steel to control hardness for extended bit life. The optimized SHOCK ZONE™ absorbs peak torque and prevents bit breakage. Milwaukee magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.
Features
- IMPACT DUTY™ Magnet prevents magnet loosening over time
- Magnetic nut driver holds screws securely during application set-up
- Optimized SHOCK ZONE™ absorbs peak torque and prevents breakage
- Color-coded bands aid with selecting the right size nut driver
- CUSTOM ALLOY76™ Steel is engineered to extend bit life
- Chamfered edge for maximum screw-head engagement
- Improved hex geometry for best fit and reduced stripping
- Designed for heavy-duty impact applications
- Designed for use with Impact Drivers and Drill Drivers
Specifications
| Bit Type | Driver |
| Package Contents | (1) SHOCKWAVE 7/16" x 1-7/8" Magnetic Nut Driver |
| Drive Design | Hex |
| Bit Material | Alloy Steel |
| Bit Sizes | 7/16 in |
| Pieces | 1 |
| Shank Diameter | 1/4 in hex |
| Set / Individual | Individual |
| Minimum Chuck Size Required | 1/4 in |
| Length | 1.875 Inches |
| Material | Alloy Steel |
| Screwdriver Bit Type | Nutsetter |
| Drive Type | Magnet Nut Driver |
The MILWAUKEE® SHOCKWAVE Impact Duty™ Magnetic Nut Drivers are engineered with the Most Durable Magnet to withstand heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76™ steel to control hardness for extended bit life. The optimized SHOCK ZONE™ absorbs peak torque and prevents bit breakage. Milwaukee magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.
Features
- IMPACT DUTY™ Magnet prevents magnet loosening over time
- Magnetic nut driver holds screws securely during application set-up
- Optimized SHOCK ZONE™ absorbs peak torque and prevents breakage
- Color-coded bands aid with selecting the right size nut driver
- CUSTOM ALLOY76™ Steel is engineered to extend bit life
- Chamfered edge for maximum screw-head engagement
- Improved hex geometry for best fit and reduced stripping
- Designed for heavy-duty impact applications
- Designed for use with Impact Drivers and Drill Drivers
Specifications
| Bit Type | Driver |
| Package Contents | (1) SHOCKWAVE 3/8" x 1-7/8" Magnetic Nut Driver |
| Drive Design | Hex |
| Bit Material | Alloy Steel |
| Bit Sizes | 3/8 in |
| Pieces | 1 |
| Shank Diameter | 1/4 in hex |
| Set / Individual | Individual |
| Minimum Chuck Size Required | 1/4 in |
| Length | 1.875 Inches |
| Material | Alloy Steel |
| Screwdriver Bit Type | Nutsetter |
| Drive Type | Magnet Nut Driver |
The MILWAUKEE® SHOCKWAVE Impact Duty™ Magnetic Nut Drivers are engineered with the Most Durable Magnet to withstand heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76™ steel to control hardness for extended bit life. The optimized SHOCK ZONE™ absorbs peak torque and prevents bit breakage. Milwaukee magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.
Features
- IMPACT DUTY™ Magnet prevents magnet loosening over time
- Magnetic nut driver holds screws securely during application set-up
- Optimized SHOCK ZONE™ absorbs peak torque and prevents breakage
- Color-coded bands aid with selecting the right size nut driver
- CUSTOM ALLOY76™ Steel is engineered to extend bit life
- Chamfered edge for maximum screw-head engagement
- Improved hex geometry for best fit and reduced stripping
- Designed for heavy-duty impact applications
- Designed for use with Impact Drivers and Drill Drivers
Specifications
| Bit Type | Driver |
| Package Contents | (1) SHOCKWAVE 5/16" x 1-7/8" Magnetic Nut Driver |
| Drive Design | Hex |
| Bit Material | Alloy Steel |
| Bit Sizes | 5/16 in |
| Pieces | 1 |
| Shank Diameter | 1/4 in hex |
| Set / Individual | Individual |
| Minimum Chuck Size Required | 1/4 in |
| Length | 1.875 Inches |
| Material | Alloy Steel |
| Screwdriver Bit Type | Nutsetter |
| Drive Type | Magnet Nut Driver |
Features
- Extreme durability and impact resistance for up to 50X longer life versus standard bits
- Torque Resistant Design for less stress on the tip
- Optimized tip design reduces wear, minimizes breakage and prevents slippage
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 2" |
| Pack Quantity | 5 |
| Shank | 1/4" Hex |
| Screwdriver Head | SQ2 |
| Screwdriver Style | Square |
