Cordless Bare Tools

The MILWAUKEE® M12 Cable Stapler delivers unmatched stapling performance in the most compact battery-powered solution leading to a faster, more efficient rough-in process. The compact, lightweight design provides users with access to tight stud bays and improved ergonomics when stapling overhead or during difficult-to-reach situations. Moveable cable guides ensure proper alignment and the coil-spring mechanism consistently sinks the staples to the appropriate depth when fastening NM-B Sheathed Cable (14, 12, 10 AWG) and low voltage cables, supporting peak stapling productivity. Only compatible with the Milwaukee 1" insulated staples (sold separately), the M12 Cable Stapler gives the user the run-time needed to sink up to 1,200 staples on a fully charged M12 CP2.0ah battery.

The MILWAUKEE® M12™ Mounting Fan delivers 18V air speed anywhere on the jobsite, providing air performance up to 14 MPH and 400 CFM. The fan's 6 inch blade propels air at a fast rate, allowing for quick and efficient cooling, drying, or ventilation. This mountable fan is compact with integrated features for users to easily mount it in various locations around the jobsite. The Milwaukee cordless M12™ Mounting Fan has powerful magnets, a 2 inch spring-loaded clamp, keyholes, and pass-through holes to deliver air movement wherever needed. This battery powered fan provides users with unlimited directional airflow with 360-degree head rotation. The Milwaukee cordless jobsite fan offers three-speed settings - high, medium, and low, providing optimal air speed control. With up to 16 hours of run time on a MILWAUKEE® M12™ XC 6.0 battery, the M12™ Fan provides all day run time on a single battery charge (batteries and charger sold separately).

The MILWAUKEE® M18 FUEL™ Compact Vacuum provides powerful performance and ultimate versatility to excel in small-area and spot clean-up applications on the jobsite. Armed with a POWERSTATE™ Brushless Motor and exclusive two-stage debris separation, the compact shop vac is optimized for dry jobsite debris. The two-stage debris separation divides small and large particles into the bagless canister prior to entering the filter. This delivers up to 50% more sustained suction versus the competition and more efficient clean-up. For maximum versatility, the portable vacuum's orientation and quick-change accessories can be manipulated from upright use at ground level, waist level, or for use overhead. It comes fully equipped with an extension wand, powered floor tool, floor tool, flexible hose, crevice tool, utility tool, brush tool, accessory holder, HEPA filter, and foam pre-filter.

The MILWAUKEE® M18 FUEL™ 1/2" Hammer Drill Driver is the Industry's Most Powerful Hammer Drill, delivering the capability to drill the largest holes at high speed into the densest materials. The cordless drill is the Most Compact solution in its class and features AutoStop™ Control Mode for Enhanced Safety. The POWERSTATE™ Brushless motor delivers the most power under load to complete 2-9/16" Self-Feed holes in dense woods for increased productivity. At only 6.9" in length, this is the most compact cordless drill in its class for the best access and maneuverability in tight spaces. The AutoStop™ Control Mode offers enhanced safety for the operator by preventing over-rotation in a bind-up with the best reaction time in the industry. The REDLINK PLUS™ intelligence ensures maximum performance and protects from overloads, heating, and over-discharge. The MILWAUKEE® M18™ REDLITHIUM™ battery packs deliver more work per charge and more work over the life of the pack when compared to competitors. The all metal ratcheting chuck is the best-in-class. This provides increased grip strength, durability, and corrosion resistance.

The DEWALT 20V Cordless Dry Hand Vacuum (Tool only) is a jobsite cleaning solution that provides users with powerful performance (46 CFM) to pick up common jobsite debris ranging from drywall, dust, to small screws and nails. This versatile vacuum comes with 6 different cleaning attachment accessories to tackle any cleaning job from floor level to overhead. The hand vacuum can be used to handle smaller messes or used in combination with the extension tube and floor accessory to clean up floor areas. A bright LED light illuminates the darkest areas. A HEPA Filter allows for clean efficient cleanup of fine dust and drywall and follows OSHA Table 1 Compliance under housekeeping rules. It comes fully equipped with an extension tube, floor nozzle, flexible hose, crevice nozzle, gulper brush, round brush, belt hook, accessory holder, and HEPA filter. Up to 21.4 minutes of runtime per charge using DCB205 battery (sold separately). Can fill up to 15 tank fills per charge using DCB205 battery (sold separately).

The MILWAUKEE® M18™ Brushless 18" Fan delivers corded performance anywhere on the job site, providing air circulation over 50 ft and up to 13.5 MPH. The 18-inch blade and brushless motor quickly propels air, allowing for fast and efficient cooling, drying, or ventilation. The reinforced metal base and shroud design withstands demanding job site environments and delivers impact, water, and dust resistance. This lightweight, mobile fan can adapt to any location with 360 degrees of rotation and 5 hours of use on high with the M18™ HD12.0. The integrated AC plug offers the versatility to plug in a standard extension cord for extended runtime. For optimized storage and transportation, this fan has an interlocking stackable design. The new M18™ Brushless 18" Fan delivers CORDED PERFORMANCE. DURABLE COOLING. TOTAL MOBILITY.

The MILWAUKEE® M12 FUEL™ ProPEX® Expander unlocks a breakthrough in productivity for plumbing installers, delivering the fastest 3/8"-1" expansions. Featuring an auto-rotating head, the expander provides uniform expansions for the most consistent installations. In combination with the ProPEX® Expander Heads with RAPID SEAL™, installers will experience up to 65% faster sealing of connections as temperatures decrease, reducing the time before pressure testing. An extended dual actuating trigger and a compact right-angle design provide easy access in tight locations. All-metal gears and an integrated metal frame deliver maximum durability on the job site. The POWERSTATE™ Brushless Motor offers the fastest expansions yet runs cooler with no wearable components. The REDLITHIUM™ 2.0 Compact Battery Pack provides up to 20% more power, 2X more recharges than standard lithium-ion batteries, and best-in-class performance in extreme jobsite conditions. REDLINK PLUS™ intelligence ensures optimized performance and protection from overload, overheating, and over-discharge. The onboard fuel gauge helps monitor the charge more accurately, so there's less downtime on the job.

The M18™ 2 Gallon wet/dry vacuum provides users with a powerful and portable wet/dry clean-up tool. A high performance motor creates powerful suction for both wet and dry applications. Its stackable design and organized on-board storage keeps all of the attachments inside the unit for convenient transport and storage. The 0880-20 comes with a flexible hose, crevice tool, utility nozzle, and a certified HEPA filter. With 30+ minutes of run time on a M18™ REDLITHIUM™ HIGH DEMAND™ 9.0 battery pack, its ideal for extended spot and area clean up.

The M18 FUEL™ Super Hawg™ delivers the power and run-time necessary to complete full cordless rough-ins. Optimized for plumbing, pipe fitting and HVAC professionals, this drill powers through 6-1/4 in. holes and can drill over (100) 2-9/16 in. holes per charge in 2x dimensional lumber with a self-feed bit. The POWERSTATE brushless motor generates the same power and speed in application as a corded right angle drill. REDLINK PLUS intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. The REDLITHIUM HIGH OUTPUT™ 6.0 batteries delivers the power and run-time necessary to complete cordless rough-ins. A mechanical clutch in low speed protects the tool from damage in the case that a bit binds up and the tool stalls.

The Milwaukee® M18™ brushless threaded rod cutter is a dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4 in., 3/8 in. and 1/2 in. mild steel to 1/4 in. and 3/8 in. stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18™ REDLITHIUM™ 2.0 Ah battery. The four-sided cutting dies allow users to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts allowing nuts to be threaded on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides users with a stable surface for bench top cuts.

Rapidly fasten and remove bolts, nuts, and other fasteners with this XTREME 12V MAX Brushless Cordless 3/8 in. Ratchet. Designed for long-lasting performance, the ratchet delivers 60 ft-lbs of max torque for jobs in compact spaces while its glass-filled nylon housing helps prevent damage from harsh chemicals and solvents on the worksite. Keep productivity high by brightening work areas with its integrated LED worklight and adjust the output speed as needed with the variable speed trigger. Battery and charger not included.

When the project calls for quick fastening or removal, trust this XTREME 12V MAX Brushless Cordless 1/4 in. Ratchet to help you complete the job. Engineered to fasten and remove small nuts, bolts, and other fasteners in hard-to-reach work areas, this power tool delivers the durability and versatility needed to handle a variety of applications with its 1/4 in. square drive and 40 ft-lbs of max torque. Designed to resist the effects of harsh jobsite chemicals and solvents, the ratchet features a protective, glass-filled nylon housing to help deliver long-lasting performance. Manual operation is also an option to tackle stubborn fastening applications. Battery and charger not included.

Grab and lift construction materials with the DEWALT 20V MAX* GRABO LIFTER. With a lift-load capacity of up to 265 lbs. MAX, this Lifter utilizes a powerful electric vacuum pump to lift a wide range of heavy construction materials including glass, tile, and metal, as well as semi-porous materials like wood, drywall, concrete and natural stones. This product is equipped with a built-in pressure sensor that automatically controls the pump that helps to maintain the vacuum grip. Featuring a digital pressure gauge display, audio alarm, and a double-action button, the DEWALT 20V MAX* GRABO LIFTER helps maximize user control during lifting, carrying or installation applications. Powered by a 20V MAX* battery, this tool conveniently offers generous runtime for long work days.

The Milwaukee M18™/M12™ wireless jobsite speaker delivers the loudest and clearest sound on or off the jobsite. The premium six speaker design provides unmatched clarity of sound with booming bass, clear mids, and sharp highs. Paired with a 40 W dual channel digital amplifier, the speaker produces big sound to fill any room or work environment. Nothing but heavy duty construction features impact resistant side caps and a reinforced honeycomb grill to withstand drops and abuse. The latest Bluetooth® technology ensures easy pairing with a smart phone, tablet, or other mobile device from up to 100 ft away. Compatible with all M18™ and M12™ batteries or able to run off of AC power, the M18™/M12™ wireless jobsite speaker maximizes versatility, functionality, and performance to set a new standard in high-definition jobsite sound.

Our M12 FUEL™ installation drill/driver features 4 dedicated solutions, delivering unrivaled access and control with up to 300 in-lbs of max torque. Four dedicated heads, including a 3/8 in. chuck, offset driver, 1/4 in. hex, and right angle, can attach in 16 different positions. This provides you with a 4-in-1 drilling and driving solution that is purposefully designed to reach uniquely challenging locations. The compact drill driver features a slim tool profile and an inline grip in the back of the tool that provides ultimate tool control and unrivaled access. The top of the tool is flat, allowing the tool to be placed flush against surfaces for additional access when needed. The front of the tool is equipped with a magnetic bit holder that securely holds multiple bits, enhancing your productivity. These unique features combine with the tool's compact size and weight allowing you to maneuver the multi-head drill/driver for maximum versatility and best access in hard to reach places. The modular drill/driver is equipped with a POWERSTATE™ brushless motor, delivering you with 1600 RPMS and 300 in./lbs of torque. This provides you with the necessary power for installation applications, especially in electrical, cabinet installation, MRO, HVAC, automotive, and remodel applications. The installation drill/driver features REDLINK Plus™ intelligence, protecting your tool from overloading or overheating. The compact cordless drill/driver is powered by our M12™ REDLITHIUM™ battery packs (not included), delivering you with more run-time per charge and more work over the life of the pack. In addition to the 12 Volt tool and four attachments, a compartmentalized contractor bag is included to hold each individual head.

When you need the perfect balance of high performance and size to get tough jobs done, use this new 20V MAX XR Cordless 1/2 in. Mid-Range Impact Wrench with Detent Pin Anvil. This power tool delivers 600 ft-lbs of max fastening torque and 800 ft-lbs. of max breakaway torque for challenging projects. Designed to help prevent overtightening in forward, and run-off in reverse, the wrench integrates a Precision Wrench setting to help optimize user control. Utilize the updated 4-mode push button switch to easily transition speeds when needed. This Impact Wrench brings high torque and weighs less than 4 lbs. (Tool only), making it ideal for pipe flanges, grooved couplings, tilt wall braces, wheel lugs, concrete anchor setting and many other applications where high torque is needed in compact spaces. Battery and charger sold separately.

This Compact Bandsaw is lightweight at 6.6 lbs. with an integrated guard, making it ideal for overhead and one-handed cutting applications. The 1-3/4 in. cut capacity allows for cuts in small-sized metal diameters found on the jobsite. Adjust to the required speed for cutting through stainless-steel, strut, and all thread with the variable-speed trigger and speed dial. Hang this bandsaw in between cuts with the integrated hang hook and illuminate the cutting area with the LED. This tool is LAYNARD READY compatible and Tool Connect Chip-Ready.

The MILWAUKEE® M12 FUEL™ 1.6 Gallon Wet/Dry Vacuum is the first cordless 12V wet/dry vacuum of its kind. It delivers up to 40% more suction than 18V competitors, is the most compact, and is up to 2X quieter compared to other common wet/dry vacuums. The POWERSTATE™ brushless motor delivers up to 45 CFM and 42" of suction. It's compact footprint stores neatly in a van or cart with a stackable design and organized on-board storage conveniently keeps the attachments inside of the unit. It also comes with a wall mount hanging plate for increased storage options. With 14 minutes of runtime on high and 26 minutes on the low setting, this compact vacuum cleaner is ideal for spot and service focused wet/dry quick clean up needs. The cordless wet/dry vac (0960-20) comes with a flexible hose, crevice tool, utility nozzle, wall mount, and a certified HEPA filter.

Tackle demanding jobs with this high-performance ATOMIC 20V MAX 5/8 in. Brushless Cordless SDS Plus Rotary Hammer. The DEWALT brushless motor and durable German-engineered mechanism deliver 1.4 Joules of impact energy. The lightweight and compact design makes this tool ideal for rod hanging, concrete forming, cable tray and strut mounting, clip and bracket mounting, and railing mounting. It is part of the PERFORM and PROTECT product line, integrated with the SHOCKS ACTIVE VIBRATION CONTROL System and becomes OSHA Table 1 Compliant when used with the DWH200D shroud and DWH161D1 dust extractor. Battery and charger sold separately.

The MILWAUKEE® M18 FUEL™ 6 Gallon Wet/Dry Vacuum brings unmatched performance, durability, and versatility to jobsite cleanup. The POWERSTATE™ Brushless Motor and optimized components Outperform 3.5 Peak HP Wet/Dry Vacuums, delivering more cleaning power than corded. The wet/dry vac cleans up more common jobsite debris like drywall dust, concrete dust, and wood/metal shavings than 3.5 peak HP wet/dry vacuums in the same amount of time. This wet/dry vacuum provides the Most Durable Wheels and Hoses with reinforced casters and tread design for up to 8X wheel life. The crush and twist-resistant hose construction deliver up to 2X hose life. This vac is part of the Most Versatile Wet/Dry Vacuum System with interchangeable motor heads, tanks, and carts for varying performance, holding capacity, and mobility with the easy access foot pedal. MAX POWER MODE delivers up to 31 minutes of continuous cleaning time (up to 1,000 ft²) per charge on an M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 Battery Pack. MAX RUN-TIME MODE delivers up to 47 minutes of continuous cleaning time (up to 1,300 ft²) per charge on an HD12.0 Battery Pack. The included Large High-Efficiency Filter ensures optimal dust and microparticle collection. Milwaukee Fleece Dust Bags can be used for less debris build-up on the filter. Integrated accessory storage allows for easy access to the crevice tool and utility nozzle on the motorhead, with more accessory storage spots on the removable wet/dry vacuum cart.

The MILWAUKEE® M12 FUEL™ 1/4" Hex Impact Driver is the Fastest Subcompact Impact Driver, the Most Compact, and provides Maximum Workspace Visibility. The POWERSTATE™ Brushless motor delivers the fastest driving speeds in the subcompact class for unmatched productivity. At only 5" long and 7.6" tall (with M12 CP 2.0 Ah battery), this solution is the most overall compact impact driver in class, allowing greater access in tight spaces and overall portability. Tri-LEDs surround the bit accessory with brighter lights and less shadows providing maximum workspace visibility. MILWAUKEE® REDLINK PLUS™ Intelligence delivers top of the line thermal performance allowing more work to be completed. Get all day runtime when paired with the MILWAUKEE® M12 REDLITHIUM™ battery pack. The M12 FUEL™ Impact Driver is part of MILWAUKEE® M12™ System which is fully compatible with over 125 solutions.

Get the performance and versatility you need to complete challenging fastening work with this ATOMIC 20V MAX Brushless Cordless 3/8 in. Ratchet. Delivering 70 ft-lbs. of max torque, the ratchet helps you tighten and remove a broad range of nuts, bolts, and other fasteners of various sizes. The glass-filled nylon housing helps prevent the effects of harsh automotive solvents and chemicals. Its integrated LED worklight helps keep your workspace well-lit, while its compact build is designed to help you access difficult-to-reach fasteners. Battery and charger not included.

Faster water transfers, faster service calls. The M18™ transfer pump is the industry's first cordless transfer pump with the fastest setup in the marketplace. With an innovative self-priming pump, you can connect and go quicker than ever. The tool's flexible impeller and powerful pump moves water at up to 480 gallons per hour, generates up to 18 Ft. of lift and produces up to 75 Ft. of head height. As a part of the M18™ system of tools, it is powered by REDLITHIUM™ battery packs, which deliver up to 240 gallons moved per charge on a XC5.0 battery pack. On board REDLINK™ Intelligence can recognize when the tool stops moving water and automatically shuts itself off to avoid dry pumping. Additionally, REDLINK™ provides optimized performance, and overload protection abusive situations.

The M18™ FUEL™ 3-in-1 backpack vacuum brings unmatched performance, portability, and versatility to the jobsite cleanup category. A POWERSTATE™ brushless motor and cyclonic technology delivers up to 2X more suction than the competition, allowing users to clean up drywall dust, concrete dust, wood/metal shavings and other common jobsite debris quicker and more efficiently. A quick release removable harness with an integrated canister hook allows users to wear, hang, and carry the product for ultimate cleaning versatility on any jobsite. At only 76 dB(A), the vacuum is up to 3X quieter than a traditional jobsite vacuum, allowing for quiet operation in occupied spaces. As a part of the M18 system of tools, it is powered by REDLITHIUM™ battery packs, which deliver up to 25 minutes of run time on a HIGH DEMAND™ 9.0 battery pack in high mode, and over 40+ minutes of run time in low mode. For added convenience, the 0885-20 empties debris at the click of button, reducing downtime when the canister is full and allowing users to get back to the task at hand. Whether you are doing spot, area, or final cleanups, the M18™ FUEL™ 3-in-1 backpack vacuum can go anywhere on any jobsite to complete countless cleanup tasks.

The MILWAUKEE® M18 FUEL™ 1/4" Hex Impact Driver is the Most POWERFUL and FASTEST DRIVING impact driver, featuring ULTIMATE TRIGGER CONTROL. MILWAUKEE® POWERSTATE™ Brushless motor delivers unmatched power for a full range of capabilities to complete the widest variety of applications. Increase productivity on the jobsite with the fastest driving speed of any impact driver without sacrificing power or control. MILWAUKEE® REDLINK PLUS™ intelligence delivers ULTIMATE TRIGGER CONTROL by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials. MILWAUKEE® M18™ REDLITHIUM™ Battery Packs deliver more work per charge and more work over the life of the pack. Featuring 4-mode drive control provides users with greater control over output speed and power. Self-Tapping Screw Mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking, and stripping out screws. This new impact driver also features Tri-LED lighting, illuminating the area of work while eliminating shadows. The M18 FUEL 1/4" Hex Impact Driver is part of MILWAUKEE® M18 system which is fully compatible with over 200+ solutions.

Perform fast single pass cuts and scores in concrete, pavestones, steel, and rebar with this 60V MAX Brushless Cordless 9 in. Cut-Off Saw. The cut-off saw delivers up to 6,600 no-load rpm with its high-performance brushless motor while the 9 in. wheel allows for cuts up to 3-1/4 in. deep. Get power and runtime feedback during demanding applications with the integrated heavy-load indicator light and rotate the saw as you work using the 5-position guard to choose the best cutting angle for visibility and mobility in confined spaces. For protection in harsh jobsite conditions, the onboard battery box can be latched, sealed, and is large enough to accommodate the DCB615 battery (battery sold separately). This versatile saw features built-in WIRELESS TOOL CONTROL functionality which is designed to enhance runtime and worksite productivity by allowing it to be linked to other compatible tools and operated cord-free. This power tool is OSHA Table 1 Compliant for dust management with the dual-sided water feed system and it is Tag Ready so users and companies can simply attach a DEWALT Tag and track its location via the DEWALT Tool Connect app. Tag is sold separately.

Our 20V MAX XR Cordless Jig Saw features an efficient motor for powerful performance and extreme runtime. Precisely control blade speed up to 3,200 spm with the variable speed trigger and dial, for professional results no matter what you're cutting. 4-position orbital action lets you adjust for optimal cutting of a variety of materials. A bright LED light illuminates dim work surfaces and makes it easy to follow cut lines. The updated all-metal, lever-action keyless blade clamp is designed for quick and easy blade changes of t-shank jig saw blades. Also keyless, the shoe bevel is easy to adjust with detents at 0 degree, 15 degree, 30 degree, and a positive stop at 45 degree. A removable shoe cover helps protect materials from scratches, and an integrated dust blower helps remove dust and debris from your line of sight as you cut. Battery and charger sold separately.

When you need the perfect balance of high performance and size to get tough jobs done, use this new 20V MAX XR Cordless 1/2 in. Mid-Range Impact Wrench with Hog Ring Anvil. This power tool delivers 600 ft-lbs of max fastening torque and 800 ft-lbs. of max breakaway torque for challenging projects. Designed to help prevent overtightening in forward, and run-off in reverse, the wrench integrates a Precision Wrench setting to help optimize user control. Utilize the updated 4-mode push button switch to easily transition speeds when needed. This Impact Wrench brings high torque and weighs less than 4 lbs. (Tool only), making it ideal for pipe flanges, grooved couplings, tilt wall braces, wheel lugs, concrete anchor setting and many other applications where high torque is needed in compact spaces. Battery and charger sold separately.

The MILWAUKEE® M18™ Brushless Stick Transfer Pump delivers superior filtration for the fastest handheld pumping in trenches, vaults, utility pole holes, and more. Powered by the M18™ battery platform and brushless motor technology, this battery-powered water pump transfers up to 25 gallons per minute and up to 1000 gallons on (1) M18™ REDLITHIUM™ FORGE™ HD12.0 battery. Equipped with HYDROPASS™ filter technology, its 360° filter maximizes flow in heavy debris, minimizing downtime caused by clogging. With a 48" submersible reach, this stick transfer pump provides the extension needed to reach water at the bottom of trenches and difficult-to-reach areas. Compatible with a 1-1/4" discharge hose or up to two ¾" standard garden hoses using the included Y-adapter, transfer water farther to the ideal deposit location with a 17ft maximum head height. The M18™ Brushless Stick Transfer Pump joins the M18™ System of over 275+ solutions and is compatible with all M18™ REDLITHIUM batteries.

The Milwaukee® M12™ Stick Transfer Pump delivers superior filtration for uninterrupted pumping in catch basins, water meter boxes, trenches, sump pump pits, and more. Featuring a 36" submersible aluminum barrel, this transfer pump provides the extension needed to reach water at the bottom of trenches and difficult to reach areas. Equipped with HydroPass™ filter technology, its 360° filter maximizes flow in heavy debris, minimizing downtime caused by clogging. Powered by the M12™ battery platform, this water transfer pump eliminates repetitive manual pumping and improves control, requiring only one hand to pump, freeing the other to control the outflow. With a 15ft max head height and an outlet compatible with a standard 3/4" garden hose, this pump delivers the power to push water farther - out of pits and basins, over walls, and to the ideal deposit location. The transfer pump is compatible with all M12™ REDLITHIUM™ Batteries this pump keeps you productive, effortlessly pumping up to 9 gallons per minute and 275 gallons on (1) M12™ REDLITHIUM™ XC4.0 battery.

The ATOMIC 20V MAX 1/2 in. Cordless Impact Wrench was designed easily to handle various fastening projects. Get up to 300 ft-lbs. of fastening torque and 450 ft-lbs. of breakaway torque with this compact power tool that offers easy maneuverability without sacrificing power. Choose between 4 speed settings while the Precision Wrench control feature and Timber Screw mode allow for reliable high-level performance, operability, and versatility. Dark work areas are no problem with this Cordless Impact Wrench, which comes with an LED work light for visibility in dimly lit spaces. Battery not included.