S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Hardware
Features
- ULListed (406A) and compliant with the National Electrical Code
- 1" staple leg length with 3/4" plastic insulated crown
- For use in the DEWALTDCN701 20V MAX Cordless Cable Stapler
- Can be manually driven with a hammer in tight locations
- ULapproved for single or double stacked Romex(NM Sheathed Cable) and MC (Metal Clad) cable. See ULapproved cable combinations chart for specific cable approvals.
- Also suitable for use with low voltage cables such as CAT3, CAT5, and coax.
- 540 staples per box
Specifications
| Height | 3.000 in |
| Length | 5.812 in |
| Width | 3.500 in |
| Weight | 1.500 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Disclaimer | * See UL approved cable combinations chart for specific cable approvals. |
| Warranty | MWC |
| Claims Needed | Yes |
| Crown Size | 7/32 In |
| Gauge | 18 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Staple Leg Length | 1 |
| Staple Type | 7/16" Crown |
| Use Location | Other |
Specifications
| Class | MR |
| Sub Class | MS |
| Size | 10-32 x 1-1/4 |
| Drive Type | Slotted |
| Thread Type | Fine |
| Thread Length | Full |
| Material | Steel |
| Finish | Zinc |
Specifications
| Class | MR |
| Sub Class | MS |
| Size | 10-32 x 1-1/2 |
| Head Style | Round |
| Drive Type | Slotted |
| Thread Type | Fine |
| Thread Length | Full |
| Material | Steel |
| Finish | Zinc |
Specifications
| Class | MR |
| Sub Class | MS |
| Size | 10-32 |
| Drive Type | 3/8" Wrench |
| Thread Type | Fine |
| Hardness | Grade 2 |
| Material | Steel |
| Finish | Zinc |
Features
- Galvanized coating with a 2,500 nails come in each pack with 100 nails per stick.
Specifications
| Height | 1.750 in |
| Length | 5.625 in |
| Width | 3.688 in |
| Weight | 3.750 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Warranty | MWC |
| Claims Needed | No |
| Collation | Glue |
| Crown Size | 0.25 in In |
| Fastener Type | Staple |
| Gauge | 18 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Staple Type | 1/4" Crown |
| Use Location | Finishing |
Specifications
| Class | MR |
| Sub Class | MS |
| Size | 10-24 |
| Drive Type | 3/8" Wrench |
| Thread Type | Coarse |
| Hardness | Grade 2 |
| Material | Steel |
| Finish | Zinc |
Specifications
| Class | MR |
| Sub Class | MS |
| Size | 10-24 x 1/2 |
| Drive Type | Slotted |
| Thread Type | Coarse |
| Thread Length | Full |
| Material | Steel |
| Finish | Zinc |
Specifications
| Class | MR |
| Sub Class | MS |
| Size | 10-24 x 1 |
| Drive Type | Slotted |
| Thread Type | Coarse |
| Thread Length | Full |
| Material | Steel |
| Finish | Zinc |
Bostitch manufactures over 2000 types of fasteners. Each fastener is engineered for optimal performance in Bostitch tools, and for exceeding the performance expectations of our customers. Our goal is to continually increase efficiency, productivity and quality, and to ensure building code compliance through the ICC ESR 2020, ICC ESR 1539 and ICC ER 5426 reports. Our team of engineers leads the industry in innovation and design. Utilizing our advanced laboratory, our team of engineers conducts environmental testing to study the effects of storm forces and other weather conditions, withdrawal testing to evaluate new coatings, penetration testing to evaluate drive characteristics, and development testing to optimize withdrawal, shear and pull-through performance.
Features
- Box weighs 3. 85-Pound
- Coated finish for a polished look
- Coverage: 1, hardwood flooring cleats per 2 square feet of flooring
- Fits Bostitch nailers HFN1, MIIIFN, MFN2; Porter-Cable FCN2; powernail 345 and 45; primatech P21, H3, H33 and Q5; Senco SHF5, SHF15 and SHF1; and true value 42578 and MIIIFN
Specifications
| Height | 1.400 IN |
| Length | 6.600 IN |
| Width | 2.200 IN |
| Weight | 3.774 LB |
| Type | FASTENERS: FLOORING NAILS |
| Net Lit-Ion Y/N | No |
| Primary Material | Steel |
Features
- Thickcoat™ galvanized finish delivers consistent, corrosion-resistant performance in pressure treated lumber and exterior applications
- Blunt diamond point reduces wood splitting in hardwood applications
- Quantity: 3,600 wire weld coil siding nails
- Fits the following Bostitch tools: N63CP, N64C, N66C, N66BC
Specifications
| Height | 5.200 IN |
| Length | 13.875 IN |
| Width | 9.688 IN |
| Weight | 15.950 LB |
| Type | FASTENERS: ROOFING NAILS |
| Primary Material | Metal |
Features
- 1-1/2" Length
Specifications
| Height | 1.100 in |
| Length | 5.625 in |
| Width | 3.600 in |
| Weight | 2.500 lbs |
| Power Source | NON-ENERGY USING |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Prop 65 Generic Warning | No |
| Warranty | MWC |
| Certifications Or Listings | ANSI Safety Listing |
| Collation | Glue |
| Crown Size | 0.25 in In |
| Fastener Length | 1 |
| Fastener Type | Staple |
| Gauge | 18 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Nail Gauge | 18 |
| Staple Leg Length | 1 |
| Staple Type | 1/4" Crown |
| Use Location | Finishing |
| Use With | Construction |
Features
- This product is easy to use.
- This product is highly durable
- This product is manufactured in China.
Specifications
| Height | 7.500 IN |
| Length | 10.400 IN |
| Width | 8.700 IN |
| Weight | 44.770 LB |
The MILWAUKEE® M18 FUEL Utility Fencing Stapler Kit delivers unmatched performance in a completely battery-powered solution. By leveraging our Nitrogen Air Spring technology, POWERSTATE™ Brushless motor and REDLINK™ Intelligence, this stapler delivers the power to seat staples into the toughest Utility Pole and Fence Post Materials. The Milwaukee M18 FUEL Utility Fencing Stapler provides users a 6X Increase in productivity and a reduction in Peak Muscle Effort compared to Manual Staple Installation. Designed for compatibility with MILWAUKEE® 9 Gauge Galvanized Staples (sold separately) available in three sizes - 1 1/2", 1 3/4", 2". When paired with the M18 REDLITHIUM™ CP3.0 Battery pack, this stapler gives users the ability to sink up to 600 staples per charge no gas cartridge required. The MILWAUKEE® M18 FUEL Utility Fencing Stapler joins the M18 System of over 200 solutions and is compatible with all M18™ REDLITHIUM batteries.
Features
- Only compatible with Milwaukee 9GA Galvanized Staples (MPU112-960, MPU134-960, MPU2-960)
- Fires up to 600 Staples on a M18 HO CP 3.0AH Battery
- No Gas Cartridge Required - Completely Battery Operated
- Fires 2 Staples Per Second
- Tool Free Depth Adjustment
- Tool Free Jam Clearing Latch
- Integrated lanyard loop ensures easy transfer and storage
- Enlarged touchpoints designed specifically for use with insulated & leather gloves
- Manual Trigger Lock Switch
- Reversible Belt Hook
- LED Work Light
- Dry Fire Lockout
- Part of the M18™ system, featuring over 200+ solutions
- POWERSTATE Brushless Motor delivers longer life and higher performance
- REDLITHIUM battery technology - superior pack construction, electronics and performance deliver more work per charge and more work over pack life than any battery on the market
Specifications
| Powered Tool Power Source | Electric - Cordless |
| Cordless / Corded | Cordless |
| Staple Use | Fencing |
| Voltage (V) | 18.0 |
| Amperage (A) | 3.0 |
| Fastener Gauge Range | 9 ga |
| Fastener Length Range | 1.5 to 2 in |
| Fastener Format | Strip |
| Fasteners Used | Milwaukee 9ga Galvanized Staples |
| Color / Finish | Red, Black |
| Staple Type | 9ga Galvanized |
| Cord Length (ft) | 0 |
| Housing Material | Glass Filled Nylon |
| Length | 15.0 Inches |
| Height | 12.8 Inches |
| Net Tool Weight (lbs) | 11.2 |
| Case Included | Yes |
| CSA Certified | No |
| ETL Listed | No |
| UL Listed | Yes |
