Concrete Drill Bits - Page 8 of 9

DEWALT 7/8-Inch By 13-1/2-Inch SDS Max Rotary Hammer Bit

Features

Extreme durability: IRON BLAST TECHNOLOGY strengthens the bit
2x longer life: Full carbide head in 4 cutter design
Stands up to rebar strikes: Redesigned head geometry to withstand rebar strikes
Wear mark indicator: For accurate diameter of holes
No break guarantee: If your bit fails for any reason while the wear mark is still visible, we'll replace it (excludes: DW5861, DW5830, DW5831)

Specifications

Length	1.16 in
Width	1.16 in
Height	15.25 in
Weight	1.28 lbs
Product Diameter Us	.875 IN
Power Source	NON-ENERGY USING
Battery Included	No
Battery Test Summary	DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Net Lit-Ion Y/N	No
Prop 65 Generic Warning	No
Warranty	MWC
Bit Type	Percussion
Chuck Type	SDS-Max
Flute Length	8 In
Individual Vs. Set (Syndigo)	INDIVIDUAL
Shank Diameter	SDS-Max
Product Primary Material	Carbide

Item#:

DW5815

Manufacturer Item:

DW5815

FACT TAG Print EN DPS1

Your Price:

68.99

Each

Qty:

DEWALT 3/4-Inch By 8-Inch By 13-1/2-Inch 4-Cutter Sds Max Rotary Hammer Bit

The DW5810 SDS Max Rotary Hammer Bit handles the toughest concrete, stone, and other masonry materials with ease. Its Rock Carbide tip extends bit life much longer than other bits, and its tough steel construction makes this hammer bit durable and long-lasting. The DW5810's open head design helps channel dust and debris into the flutes for more efficient drilling, and the helix four-flute construction removes this debris from the drilling surface quickly for easier drilling. This bit measures 3/4-inch in diameter, 8 inches usable length, and 13-1/2 inches overall length.

Features

Extreme durability: IRON BLAST TECHNOLOGYstrengthens the bit
2X longer life: Full carbide head in 4 cutter design
Stands up to rebar strikes: Redesigned head geometry to withstand rebar strikes
Wear mark indicator: For accurate diameter of holes
NO BREAK GUARANTEE: If your bit fails for any reason while the wear mark is still visible, we'll replace it (excludes: DW5861, DW5830, DW5831)
CONTROLLED PENETRATION INTO CONCRETE: Pilot point design for quick starts into the material and accurate holes.
FAST DRILLING: Optimized flute design removes dust quickly from the hole for fast drilling.
ANCHOR WEAR MARK INDICATOR: For drilling accurate hole diameters when using the bit to install anchors. Located on the flute of the bit, once the wear mark is no longer visible it is time to change the bit for proper anchor installation.
High Impact tip maximizes carbide surface contact for longer bit life.

Specifications

Length	1.16 in
Width	1.16 in
Height	15.25 in
Weight	1.1 lbs
Product Diameter Us	.75 IN
Power Source	NON-ENERGY USING
Battery Included	No
Battery Test Summary	DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Net Lit-Ion Y/N	No
Disclaimer	DEWALT ELITE SERIES 5/8" X 21" SDS MAX drill bit DW5809 vs. BOSCH HC5021 drilling C35/C45 concrete. BOSCH is a registered trademark of ROBERT BOSCH GMHB, which has not endorsed or approved this comparison. \| If your drill bits fails for any reason while the anchor wear mark is still visible on the product head, DEWALT will replace it free of charge. For more details, visit: www.DEWALT.com/support/warranty
Prop 65 Generic Warning	No
Warranty	MWC
Chuck Type	SDS-Max
Flute Length	13 In
Individual Vs. Set (Syndigo)	INDIVIDUAL
Shank Diameter	SDS-Max
Product Primary Material	Carbide Tipped

Item#:

DW5810

Manufacturer Item:

DW5810

FACT TAG Print EN DPS1

Your Price:

45.99

Each

Qty:

DEWALT SDS Max Bit For Rotary Hammer, 5/8-Inch X 16-Inch X 21-1/2-Inch, ...

Features

Extreme durability: IRON BLAST TECHNOLOGYstrengthens the bit
2X longer life: Full carbide head in 4 cutter design
Stands up to rebar strikes: Redesigned head geometry to withstand rebar strikes
Wear mark indicator: For accurate diameter of holes
NO BREAK GUARANTEE: If your bit fails for any reason while the wear mark is still visible, we'll replace it (excludes: DW5861, DW5830, DW5831)
High Impact tip maximizes carbide surface contact for longer bit life.

Specifications

Length	1.16 in
Width	1.16 in
Height	23.25 in
Weight	1.24 lbs
Product Diameter Us	.625 IN
Power Source	NON-ENERGY USING
Battery Included	No
Battery Test Summary	DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Net Lit-Ion Y/N	No
Prop 65 Generic Warning	No
Warranty	MWC
Chuck Type	SDS-Max
Flute Length	16 In
Individual Vs. Set (Syndigo)	INDIVIDUAL
Self Feeding	No
Shank Diameter	3/8 in
Shank Length	1 In
Shank Type	SDS-Max
Product Primary Material	Carbide

Item#:

DW5809

Manufacturer Item:

DW5809

SELL SHEET Print EN DMK1

SELL SHEET Web EN DMK1

FACT TAG Print EN DPS1

Your Price:

69.99

Each

Qty:

DEWALT Sds Max Bit For Rotary Hammer, 5/8-Inch X 8-Inch X 13-1/2-Inch, 4...

Features

Extreme durability: IRON BLAST TECHNOLOGY strengthens the bit
2X longer life: Full carbide head in 4 cutter design
Stands up to rebar strikes: Redesigned head geometry to withstand rebar strikes
Wear mark indicator: For accurate diameter of holes
NO BREAK GUARANTEE: If your bit fails for any reason while the wear mark is still visible, we'll replace it (excludes: DW5861, DW5830, DW5831)

Specifications

Length	1.16 in
Width	1.16 in
Height	14.6 in
Weight	1.04 lbs
Product Diameter Us	.625 IN
Power Source	NON-ENERGY USING
Battery Included	No
Battery Test Summary	DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Disclaimer	Vs. prior generation DEWALT Extreme drill bitsFor more details visit www.DEWALT.com/warranty
Prop 65 Generic Warning	No
Warranty	MWC
Claims Needed	No
Chuck Type	SDS-Max
Flute Length	8 In
Individual Vs. Set (Syndigo)	INDIVIDUAL
Shank Diameter	SDS-Max
Product Primary Material	Carbide Tipped

Item#:

DW5806

Manufacturer Item:

DW5806

FACT TAG Print EN DPS1

Your Price:

39.49

Each

Qty:

DEWALT 5/8-Inch By 31-Inch By 36-Inch 4-Cutter SDS Max Rotary Hammer Bit

Features

Extreme durability: IRON BLAST TECHNOLOGYstrengthens the bit
2X longer life: Full carbide head in 4 cutter design
Stands up to rebar strikes: Redesigned head geometry to withstand rebar strikes
Wear mark indicator: For accurate diameter of holes
NO BREAK GUARANTEE: If your bit fails for any reason while the wear mark is still visible, we'll replace it (excludes: DW5861, DW5830, DW5831)

Specifications

Length	1.81 in
Width	1.81 in
Height	37.75 in
Weight	2.06 lbs
Product Diameter Us	.625 IN
Power Source	NON-ENERGY USING
Battery Test Summary	DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Prop 65 Generic Warning	No
Warranty	MWC
Bit Type	Percussion
Chuck Type	SDS-Max
Flute Length	31 In
Individual Vs. Set (Syndigo)	INDIVIDUAL
Shank Diameter	SDS-Max
Product Primary Material	Carbide

Item#:

DW5807

Manufacturer Item:

DW5807

Your Price:

105.99

Each

Qty:

DEWALT 1/2" X 16" X 21-1/2", 2 Cutter SDS Max Rotary Hammer Bit

Features

DEWALT carbide tip design maximizes carbide surface contact for longer bit life
U-Flute cleans debris out for fast, efficient drilling
Open head design channels dust into flutes for quicker drilling

Specifications

Length	1.16 in
Width	1.16 in
Height	22.5 in
Weight	1 lbs
Product Diameter Us	.5 IN
Power Source	NON-ENERGY USING
Battery Included	No
Battery Test Summary	DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Net Lit-Ion Y/N	No
Prop 65 Generic Warning	No
Warranty	30DLW
Bit Type	Percussion
Chuck Type	SDS-Max
Flute Length	16 In
Individual Vs. Set (Syndigo)	INDIVIDUAL
Shank Diameter	SDS-Max
Product Primary Material	Carbide

Item#:

DW5804

Manufacturer Item:

DW5804

Your Price:

46.99

Each

Qty:

DEWALT SDS Max Bit For Rotary Hammer, 1/2" X 8" X 13-1/2", 2-Cutter

Features

DEWALT carbide tip design maximizes carbide surface contact for longer bit life
U-Flute cleans debris out for fast, efficient drilling
Open head design channels dust into flutes for quicker drilling

Specifications

Length	1.16 in
Width	1.16 in
Height	15.25 in
Weight	0.81 lbs
Product Diameter Us	.5 IN
Power Source	NON-ENERGY USING
Battery Included	No
Battery Test Summary	DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Prop 65 Generic Warning	No
Warranty	MWC
Claims Needed	No
Chuck Type	SDS-Max
Flute Length	8 In
Individual Vs. Set (Syndigo)	INDIVIDUAL
Shank Diameter	SDS-Max
Product Primary Material	Carbide Tipped

Item#:

DW5803

Manufacturer Item:

DW5803

Your Price:

51.49

Each

Qty:

DEWALT SDS+ To 1/2" Chuck Adapter

Features

Converts chuck fitments of rotary hammers for increased versatility.

Specifications

Length	9.6 in
Width	2.7 in
Height	2.4 in
Weight	1.415 lbs
Power Source	NON-ENERGY USING
Battery Test Summary	DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Warranty	MWC
Chuck Type	SDS-Max
Individual Vs. Set (Syndigo)	INDIVIDUAL
Product Primary Material	Metal

Item#:

DW5891

Manufacturer Item:

DW5891

Your Price:

72.49

Each

Qty:

DEWALT 5/8" X 8" X 10" Rock Carbide 4 Cutter SDS+ Hammer Bit

Features

High Impact Tip for Maximum Durability and Long Life
Open Head Design for Faster Material Removal
Enlongated 4 Flute Design for Faster Drilling
Manufactured by DEWALT

Specifications

Length	1.88 in
Width	0.63 in
Height	13.25 in
Weight	0.44 lbs
Product Diameter Us	.625 IN
Power Source	NON-ENERGY USING
Battery Included	No
Battery Test Summary	DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Prop 65 Generic Warning	No
Warranty	MWC
Claims Needed	No
Bit Type	Percussion
Chuck Type	SDS-Plus
Flute Length	8 In
Individual Vs. Set (Syndigo)	INDIVIDUAL
Shank Diameter	.25
Product Primary Material	Carbide

Item#:

DW5471

Manufacturer Item:

DW5471

Your Price:

39.99

Each

Qty:

DEWALT 1-1/8" X 8" X 10" Rock Carbide SDS+ Drill Bit

DEWALT's solid rock carbide SDS+ drill bit delivers the best in durability and long life, so you can work confidently without worrying about the tool. With four cutter heads and two times more carbide than competitive two cutter bits, this bit is tough across multiple drilling operations, even in reinforced concrete. An innovative bonding system attaches the tip to the flute and ensures that the bit will last. DEWALT strives to increase your efficiency on the job, and the SDS+ bit has a four flute design that removes debris while you work.

Features

Rock carbide tip for longer bit life
Elongated four flute helix for faster material removal
Increased steel prevents breakage
For use with electric or cordless rotary hammers

Specifications

Length	1.875 in
Width	1.125 in
Height	13.25 in
Weight	1.1 lbs
Power Source	NON-ENERGY USING
Battery Test Summary	DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Warranty	None
Chuck Type	SDS-Plus
Individual Vs. Set (Syndigo)	INDIVIDUAL

Item#:

DW5468

Manufacturer Item:

DW5468

Your Price:

78.99

Each

Qty:

DEWALT 1-1/8 X 16 X 18 Rock Carbide SDS+ Drill Bit

Features

DEWALT carbide tip design maximizes carbide surface contact for longer bit life
Elongated four flute helix for faster material removal
Increased steel prevents breakage
For use with electric or cordless rotary hammers.

Specifications

Length	1.875 in
Width	1.125 in
Height	21.25 in
Weight	2.2 lbs
Power Source	NON-ENERGY USING
Battery Test Summary	DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Warranty	NLW
Chuck Type	SDS-Plus
Individual Vs. Set (Syndigo)	INDIVIDUAL

Item#:

DW5469

Manufacturer Item:

DW5469

Your Price:

103.99

Each

Qty:

DEWALT 1" X 8" X 10" Rock Carbide SDS+ Drill Bit

DEWALT's solid rock carbide SDS+ drill bit delivers the best in durability and long life, so you can work confidently without worrying about the tool. With four cutter heads and two times more carbide than competitive two cutter bits, this bit is tough across multiple drilling operations, even in reinforced concrete. An innovative bonding system attaches the tip to the flute and ensures that the bit will last. DEWALT strives to increase your efficiency on the job, and the SDS+ bit has a four flute design that removes debris while you work.

Features

1. DEWALT carbide tip design maximizes carbide surface contact for longer bit life DEWALT carbide tip design maximizes carbide surface contact for longer bit life High Grade Steel Prevents Breakage Elongated Four Flute Helix for Faster Material Removal DEWALT carbide tip design maximizes carbide surface contact for longer bit life

Specifications

Length	1.875 in
Width	1 in
Height	13.25 in
Weight	0.93 lbs
Power Source	NON-ENERGY USING
Battery Test Summary	DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Warranty	NLW
Chuck Type	SDS-Plus
Individual Vs. Set (Syndigo)	INDIVIDUAL
Product Primary Material	Carbide

Item#:

DW5464

Manufacturer Item:

DW5464

Your Price:

52.49

Each

Qty:

DEWALT 1" X 16" X 18" Rock Carbide Drill Bit

DEWALT's solid rock carbide SDS+ drill bit delivers the best in durability and long life, so you can work confidently without worrying about the tool. With four cutter heads and two times more carbide than competitive two cutter bits, this bit is tough across multiple drilling operations, even in reinforced concrete. An innovative bonding system attaches the tip to the flute and ensures that the bit will last. DEWALT strives to increase your efficiency on the job, and the SDS+ bit has a four flute design that removes debris while you work.

Features

Rock carbide tip for longer bit life
Elongated four flute helix for faster material removal
Increased steel prevents breakage
For use with electric or cordless rotary hammers

Specifications

Length	1.875 in
Width	1 in
Height	21.25 in
Weight	1.705 lbs
Power Source	NON-ENERGY USING
Battery Test Summary	DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Warranty	NLW
Chuck Type	SDS-Plus
Individual Vs. Set (Syndigo)	INDIVIDUAL

Item#:

DW5466

Manufacturer Item:

DW5466

Your Price:

71.19

Each

Qty:

DEWALT 7/8" X 16" X 18" Rock Carbide SDS+ Drill Bit

Features

DEWALT carbide tip design maximizes carbide surface contact for longer bit life
High Grade Steel Prevents Breakage
Elongated Four Flute Helix for Faster Material Removal
Manufactured by DEWALT

Specifications

Length	1.875 in
Width	0.875 in
Height	21.25 in
Weight	1.429 lbs
Battery Test Summary	DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Warranty	NLW
Chuck Type	SDS-Plus
Individual Vs. Set (Syndigo)	INDIVIDUAL

Item#:

DW5462

Manufacturer Item:

DW5462

Your Price:

73.99

Each

Qty:

DEWALT 3/4" X 16" X 18" Rock Carbide SDS+ Drill Bit

Features

1. DEWALT carbide tip design maximizes carbide surface contact for longer bit life DEWALT carbide tip design maximizes carbide surface contact for longer bit life High Grade Steel Prevents Breakage Elongated Four Flute Helix for Faster Material Removal DEWALT carbide tip design maximizes carbide surface contact for longer bit life

Specifications

Length	1.875 in
Width	0.75 in
Height	21.25 in
Weight	1.1 lbs
Battery Test Summary	DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Warranty	NLW
Chuck Type	SDS-Plus
Individual Vs. Set (Syndigo)	INDIVIDUAL

Item#:

DW5456

Manufacturer Item:

DW5456

Your Price:

54.29

Each

Qty:

DEWALT 3/4 X 6 X 8 Rock Carbide Drill Bit

DEWALT's solid rock carbide SDS+ drill bit delivers the best in durability and long life, so you can work confidently without worrying about the tool. With four cutter heads and two times more carbide than competitive two cutter bits, this bit is tough across multiple drilling operations, even in reinforced concrete. An innovative bonding system attaches the tip to the flute and ensures that the bit will last. DEWALT strives to increase your efficiency on the job, and the SDS+ bit has a four flute design that removes debris while you work.

Features

1. DEWALT carbide tip design maximizes carbide surface contact for longer bit life DEWALT carbide tip design maximizes carbide surface contact for longer bit life High Grade Steel Prevents Breakage Elongated Four Flute Helix for Faster Material Removal DEWALT carbide tip design maximizes carbide surface contact for longer bit life

Specifications

Length	1.875 in
Width	0.75 in
Height	11.25 in
Weight	0.5 lbs
Power Source	NON-ENERGY USING
Battery Included	No
Battery Test Summary	DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Net Lit-Ion Y/N	No
Warranty	NLW
Chuck Type	SDS-Plus
Individual Vs. Set (Syndigo)	INDIVIDUAL

Item#:

DW5453

Manufacturer Item:

DW5453Y

Your Price:

48.99

Each

Qty:

DEWALT 3/4" X 10" X 12" Rock Carbide SDS+ Drill Bit

Features

Rock carbide tip for longer bit life
Elongated four flute helix for faster material removal
Increased steel prevents breakage
For use with electric or cordless rotary hammers

Specifications

Length	15.2 in
Width	1.9 in
Height	0.8 in
Weight	0.76 lbs
Power Source	NON-ENERGY USING
Battery Included	No
Battery Test Summary	DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Disclaimer	NULL
Warranty	NLW
Claims Needed	No
Chuck Type	SDS-Plus
Individual Vs. Set (Syndigo)	INDIVIDUAL

Item#:

DW5455

Manufacturer Item:

DW5455

Your Price:

38.99

Each

Qty:

DEWALT 3/16" x 2" x 4-1/2" High Impact Carbide SDS+

Features

2X More Carbide for Long Life
Four flute design cleans debris out for fast, efficient drilling
Innovative Bonding System delivers extreme durability

Specifications

Length	1.875 in
Width	0.75 in
Height	21.22 in
Weight	0.639 lbs
Product Diameter Us	.5 IN
Battery Test Summary	DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Prop 65 Generic Warning	No
Warranty	30DLW
Bit Type	Twist
Chuck Type	SDS-Plus
Flute Length	16 In
Individual Vs. Set (Syndigo)	INDIVIDUAL
Shank Diameter	.25
Product Primary Material	Carbide

Item#:

DW5540

Manufacturer Item:

DW5540

Your Price:

39.99

Each

Qty:

DEWALT 1/2" X 4" X 6" High Impact Carbide SDS+

Features

1. High Impact Tip for Maximum Durability and Long Life High Impact Tip for Maximum Durability and Long Life Enlongated 4 Flute Design for Faster Drilling Open Head Desgin for Faster Material Removal 2X More Carbide for Long Life

Specifications

Length	1.875 in
Width	0.75 in
Height	9.6 in
Weight	0.28 lbs
Battery Test Summary	DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Warranty	30DLW
Chuck Type	SDS-Plus
Individual Vs. Set (Syndigo)	INDIVIDUAL

Item#:

DW5537

Manufacturer Item:

DW5537Y

Your Price:

16.49

Each

Qty:

DEWALT 1/2-Inch By 10-Inch By 12-Inch Solid Rock CarbideSDS+

Features

2X More Carbide for Long Life
Four flute design cleans debris out for fast, efficient drilling
Innovative Bonding System delivers extreme durability
High Impact Tip for Maximum Durability and Long Life

Specifications

Length	1.85 in
Width	0.47 in
Height	15.31 in
Weight	0.3 lbs
Product Diameter Us	.5 IN
Power Source	NON-ENERGY USING
Battery Test Summary	DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Prop 65 Generic Warning	No
Warranty	30DLW
Chuck Type	SDS-Plus
Flute Length	10 In
Individual Vs. Set (Syndigo)	INDIVIDUAL
Shank Diameter	.25
Product Primary Material	Carbide Tipped

Item#:

DW5539

Manufacturer Item:

DW5539

Your Price:

29.99

Each

Qty:

DEWALT 5/16-Inch By 4-Inch By 6-1/2-Inch Solid Rock CarbideSDS+

Features

2X More Carbide for Long Life
Four flute design cleans debris out for fast, efficient drilling
Innovative Bonding System delivers extreme durability
High Impact Tip for Maximum Durability and Long Life

Specifications

Length	1.85 in
Width	1 in
Height	9.64 in
Weight	0.15 lbs
Product Diameter Us	.3125 IN
Battery Test Summary	DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Prop 65 Generic Warning	No
Warranty	30DLW
Bit Diameter	0.3125 In
Chuck Type	SDS-Plus
Color Coded	No
Etched Or Stamped	Yes
Flute Length	4 In
Individual Vs. Set (Syndigo)	INDIVIDUAL
Shank Diameter	.25
Shank Type	SDS-Plus
Product Primary Material	Carbide Tipped

Item#:

DW5524

Manufacturer Item:

DW5524

Your Price:

13.69

Each

Qty:

DEWALT 1/4" X 4" X 6" Solid Carbide SDS Drill Bit

Features

2. Enlongated 4 Flute Design for Faster Drilling
3. Open Head Desgin for Faster Material Removal
2X More Carbide for Long Life
1. High Impact Tip for Maximum Durability and Long Life

Specifications

Length	1.875 in
Width	0.56 in
Height	9.19 in
Weight	0.132 lbs
Battery Test Summary	DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Warranty	30DLW
Chuck Type	SDS-Plus
Individual Vs. Set (Syndigo)	INDIVIDUAL

Item#:

DW5517

Manufacturer Item:

DW5517Y

Your Price:

11.49

Each

Qty:

DEWALT 3/16" x 2" x 4-1/2" High Impact Carbide SDS+

With up to twice the life of BOSCH you can drill through hard concrete and withstand rebar strikes with the DEWALT ELITE SERIES SDS PLUS Drill Bit 3/16" x 8". In addition, with its proprietary circulating cutting carbide design, select sizes offer longer life than previous DEWALT design. The full range of bits are made in Germany with global materials and are ideal for anchor installation. Strengthened through IRON BLAST TECHNOLOGY a process that helps resist fatigue and results in extreme durability, these bits are GUARANTEED TOUGH. So tough that DEWALT offers a NO BREAK GUARANTEE (see below). If you have our bits, DEWALT has your back.

Features

2X More Carbide for Long Life
Four flute design cleans debris out for fast, efficient drilling
Innovative Bonding System delivers extreme durability
Manufactured by DEWALT

Specifications

Length	1.875 in
Width	0.56 in
Height	11.53 in
Weight	0.13 lbs
Product Diameter Us	.1875 IN
Battery Test Summary	DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Prop 65 Generic Warning	No
Warranty	MWC
Chuck Type	SDS-Plus
Flute Length	6 In
Individual Vs. Set (Syndigo)	INDIVIDUAL
Shank Diameter	.25
Product Primary Material	Carbide Tipped

Item#:

DW5504

Manufacturer Item:

DW5504

Your Price:

16.19

Each

Qty:

DEWALT 3/16" X 4" X 6-1/2" High Impact Carbide SDS+

Features

2X More Carbide for Long Life

Specifications

Length	1.875 in
Width	0.56 in
Height	9.69 in
Weight	0.1 lbs
Power Source	NON-ENERGY USING
Battery Included	No
Battery Test Summary	DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf
Warranty	30DLW
Claims Needed	No
Chuck Type	SDS-Plus
Individual Vs. Set (Syndigo)	INDIVIDUAL

Item#:

DW5503

Manufacturer Item:

DW5503Y

Your Price:

11.59

Each

Qty:

DRILTEC RATIO CORE BIT 5" X 3"

Item#:

RK-500-500

Manufacturer Item:

RK-500-500

Your Price:

385.99

Each

Qty:

Diablo Tools 1-1/2 in. x 12 in. SDS-Plus Rebar Cutter

Features

Cuts embedded rebar up to 1-1/2"
Rebar cutters are not for enlarging holes
The size of the rebar cutter must match the size of the drill bit used to drill the hole
Carbide tips withstands impact and high heat applications, dramatically extending life versus standard rebar cutters
Unique brazing and hardening process extends life of carbide tips and increases productivity.
Optimized flute design removes dust faster, keeping the carbide tips cooler for ultimate strength and durability
Maximum performance in corded and cordless SDS-Plus rotary hammers (rotary mode only)

Applications

Rebar

Cuts

Concrete with Rebar
Rebar

Specifications

Diameter	1-1/2"
Length	12"
Pack Quantity	1
Shank	SDS Plus
Working Length	5"

Item#:

DMAPLRC1100

Manufacturer Item:

DMAPLRC1100

Your Price:

114.09

Each

Qty:

DRILTEC 18" RATIO EXTENSION W/

Item#:

RE-450-450

Manufacturer Item:

RE-450-450

Your Price:

110.99

Each

Qty:

Diablo Tools 3/8 in. x 10 in. x 12 in. Rebar Demon™ SDS-Plus 4-Cut...

Diablo's revolutionary, most complete range of SDS-Plus and SDS-Max Rebar Demon™ 4-cutter full-carbide head hammer drill bits are the only bits designed to be the most durable, fastest and coolest solutions on the market. The Rebar Demon bits feature up to 2X more Dura-Carbide to withstand up to 1800°F of intense heat whereas standard bits fail at 800°F. Diablo's impact resistant 4-cutter full-carbide head withstands the stress of high-powered hammer drills and the impact of rebar by taking small bites of rebar to deliver controlled carbide wear, reduced vibration and up to 7X longer life. Produced with Tri-Metal Fusion Welding, the full-carbide head resists heat and prevents breakage in extreme impact situations. Precision Tip delivers the stability and accuracy required to produce fast, precise holes in reinforced concrete for anchor setting.

Features

Up to 7X longer life versus standard 2-cutter hammer drill bits
Diablo made Dura-Carbide™ features up to 2X more carbide that withstands up to 1800°F of intense heat to combat rebar hits versus standard bits that fail at 800°F
Impact Resistant 4-Cutter Full Carbide Head extracts smaller bites of rebar for controlled, consistent carbide wear and reduced vibration to deliver fast, precise holes
Tri-Metal Fusion Welding features up to 3X stronger weld to keep the full carbide head intact during extreme impact such as rebar
Precision Tip delivers stability and accuracy required for fast, precise holes
Optimized flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability
Wear mark indicator ensures precise hole making
Optimized for maximum performance in corded and cordless SDS Plus or SDS Max rotary hammers

Cuts

Reinforced Concrete
Concrete
Rebar
Brick/Block

Applications

Reinforced concrete and concrete

Specifications

Diameter	3/8"
Length	12"
Number of Cutters	4
Pack Quantity	25
Shank	SDS Plus
Head Type	Full Carbide Head
Working Length	10"

Item#:

DMAPL4160-P25

Manufacturer Item:

DMAPL4160-P25

Your Price:

341.39

Each

Qty:

Diablo Tools 1-1/4 in. x 12 in. SDS-Plus Rebar Cutter

Features

Cuts embedded rebar up to 1-1/2"
Rebar cutters are not for enlarging holes
The size of the rebar cutter must match the size of the drill bit used to drill the hole
Carbide tips withstands impact and high heat applications, dramatically extending life versus standard rebar cutters
Unique brazing and hardening process extends life of carbide tips and increases productivity.
Optimized flute design removes dust faster, keeping the carbide tips cooler for ultimate strength and durability
Maximum performance in corded and cordless SDS-Plus rotary hammers (rotary mode only)

Cuts

Concrete with Rebar
Rebar

Applications

Rebar

Specifications

Diameter	1-1/4"
Length	12"
Pack Quantity	1
Shank	SDS Plus
Working Length	5"

Item#:

DMAPLRC1090

Manufacturer Item:

DMAPLRC1090

Your Price:

112.69

Each

Qty:

Diablo Tools 1-1/8 in. x 12 in. SDS-Plus Rebar Cutter

Features

Cuts embedded rebar up to 1-1/2"
Rebar cutters are not for enlarging holes
The size of the rebar cutter must match the size of the drill bit used to drill the hole
Carbide tips withstands impact and high heat applications, dramatically extending life versus standard rebar cutters
Unique brazing and hardening process extends life of carbide tips and increases productivity.
Optimized flute design removes dust faster, keeping the carbide tips cooler for ultimate strength and durability
Maximum performance in corded and cordless SDS-Plus rotary hammers (rotary mode only)

Cuts

Concrete with Rebar
Rebar

Applications

Rebar

Specifications

Diameter	1-1/8"
Length	12"
Pack Quantity	1
Shank	SDS Plus
Working Length	5"

Item#:

DMAPLRC1080

Manufacturer Item:

DMAPLRC1080

Your Price:

101.29

Each

Qty:

Diablo Tools 5/8 in. x 6 in. x 8 in. Rebar Demon™ SDS-Plus 4-Cutte...

Diablo's revolutionary, most complete range of SDS-Plus and SDS-Max Rebar Demon™ 4-cutter full-carbide head hammer drill bits are the only bits designed to be the most durable, fastest and coolest solutions on the market. The Rebar Demon bits feature up to 2X more Dura-Carbide to withstand up to 1800°F of intense heat whereas standard bits fail at 800°F. Diablo's impact resistant 4-cutter full-carbide head withstands the stress of high-powered hammer drills and the impact of rebar by taking small bites of rebar to deliver controlled carbide wear, reduced vibration and up to 7X longer life. Produced with Tri-Metal Fusion Welding, the full-carbide head resists heat and prevents breakage in extreme impact situations. Precision Tip delivers the stability and accuracy required to produce fast, precise holes in reinforced concrete for anchor setting.

Features

Up to 7X longer life versus standard 2-cutter hammer drill bits
Diablo made Dura-Carbide™ features up to 2X more carbide that withstands up to 1800°F of intense heat to combat rebar hits versus standard bits that fail at 800°F
Impact Resistant 4-Cutter Full Carbide Head extracts smaller bites of rebar for controlled, consistent carbide wear and reduced vibration to deliver fast, precise holes
Tri-Metal Fusion Welding features up to 3X stronger weld to keep the full carbide head intact during extreme impact such as rebar
Precision Tip delivers stability and accuracy required for fast, precise holes
Optimized flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability
Wear mark indicator ensures precise hole making
Optimized for maximum performance in corded and cordless SDS Plus or SDS Max rotary hammers

Cuts

Reinforced Concrete
Concrete
Rebar
Brick/Block

Applications

Reinforced concrete and concrete

Specifications

Diameter	5/8"
Length	8"
Number of Cutters	4
Pack Quantity	1
Shank	SDS Plus
Head Type	Full Carbide Head
Working Length	6"

Item#:

DMAPL4220

Manufacturer Item:

DMAPL4220

Your Price:

21.99

Each

Qty:

Diablo Tools 5/8 in. x 4 in. x 6 in. Rebar Demon™ SDS-Plus 4-Cutte...

Diablo's revolutionary, most complete range of SDS-Plus and SDS-Max Rebar Demon™ 4-cutter full-carbide head hammer drill bits are the only bits designed to be the most durable, fastest and coolest solutions on the market. The Rebar Demon bits feature up to 2X more Dura-Carbide to withstand up to 1800°F of intense heat whereas standard bits fail at 800°F. Diablo's impact resistant 4-cutter full-carbide head withstands the stress of high-powered hammer drills and the impact of rebar by taking small bites of rebar to deliver controlled carbide wear, reduced vibration and up to 7X longer life. Produced with Tri-Metal Fusion Welding, the full-carbide head resists heat and prevents breakage in extreme impact situations. Precision Tip delivers the stability and accuracy required to produce fast, precise holes in reinforced concrete for anchor setting.

Features

Up to 7X longer life versus standard 2-cutter hammer drill bits
Diablo made Dura-Carbide™ features up to 2X more carbide that withstands up to 1800°F of intense heat to combat rebar hits versus standard bits that fail at 800°F
Impact Resistant 4-Cutter Full Carbide Head extracts smaller bites of rebar for controlled, consistent carbide wear and reduced vibration to deliver fast, precise holes
Tri-Metal Fusion Welding features up to 3X stronger weld to keep the full carbide head intact during extreme impact such as rebar
Precision Tip delivers stability and accuracy required for fast, precise holes
Optimized flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability
Wear mark indicator ensures precise hole making
Optimized for maximum performance in corded and cordless SDS Plus or SDS Max rotary hammers

Cuts

Reinforced Concrete
Concrete
Rebar
Brick/Block

Applications

Reinforced concrete and concrete

Specifications

Diameter	5/8"
Length	6"
Number of Cutters	4
Pack Quantity	1
Shank	SDS Plus
Head Type	Full Carbide Head
Working Length	4"

Item#:

DMAPL4210

Manufacturer Item:

DMAPL4210

Your Price:

17.99

Each

Qty:

WHIRLIBIT 3/4 X 24 (7/8X3-1/4)

Item#:

44-01226

Manufacturer Item:

44-01226

Your Price:

133.60

Each

Qty:

Diablo Tools 1/2 in. x 16 in. x 18 in. Rebar Demon™ SDS-Plus 4-Cut...

Diablo's revolutionary, most complete range of SDS-Plus and SDS-Max Rebar Demon™ 4-cutter full-carbide head hammer drill bits are the only bits designed to be the most durable, fastest and coolest solutions on the market. The Rebar Demon bits feature up to 2X more Dura-Carbide to withstand up to 1800°F of intense heat whereas standard bits fail at 800°F. Diablo's impact resistant 4-cutter full-carbide head withstands the stress of high-powered hammer drills and the impact of rebar by taking small bites of rebar to deliver controlled carbide wear, reduced vibration and up to 7X longer life. Produced with Tri-Metal Fusion Welding, the full-carbide head resists heat and prevents breakage in extreme impact situations. Precision Tip delivers the stability and accuracy required to produce fast, precise holes in reinforced concrete for anchor setting.

Features

Up to 7X longer life versus standard 2-cutter hammer drill bits
Diablo made Dura-Carbide™ features up to 2X more carbide that withstands up to 1800°F of intense heat to combat rebar hits versus standard bits that fail at 800°F
Impact Resistant 4-Cutter Full Carbide Head extracts smaller bites of rebar for controlled, consistent carbide wear and reduced vibration to deliver fast, precise holes
Tri-Metal Fusion Welding features up to 3X stronger weld to keep the full carbide head intact during extreme impact such as rebar
Precision Tip delivers stability and accuracy required for fast, precise holes
Optimized flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability
Wear mark indicator ensures precise hole making
Optimized for maximum performance in corded and cordless SDS Plus or SDS Max rotary hammers

Cuts

Reinforced Concrete
Concrete
Rebar
Brick/Block

Applications

Reinforced concrete and concrete

Specifications

Diameter	1/2"
Length	18"
Number of Cutters	4
Pack Quantity	1
Shank	SDS Plus
Head Type	Full Carbide Head
Working Length	16"

Item#:

DMAPL4200

Manufacturer Item:

DMAPL4200

Your Price:

35.99

Each

Qty:

Diablo Tools 5/8 in. x 16 in. x 18 in. Rebar Demon™ SDS-Plus 4-Cut...

Diablo's revolutionary, most complete range of SDS-Plus and SDS-Max Rebar Demon™ 4-cutter full-carbide head hammer drill bits are the only bits designed to be the most durable, fastest and coolest solutions on the market. The Rebar Demon bits feature up to 2X more Dura-Carbide to withstand up to 1800°F of intense heat whereas standard bits fail at 800°F. Diablo's impact resistant 4-cutter full-carbide head withstands the stress of high-powered hammer drills and the impact of rebar by taking small bites of rebar to deliver controlled carbide wear, reduced vibration and up to 7X longer life. Produced with Tri-Metal Fusion Welding, the full-carbide head resists heat and prevents breakage in extreme impact situations. Precision Tip delivers the stability and accuracy required to produce fast, precise holes in reinforced concrete for anchor setting.

Features

Up to 7X longer life versus standard 2-cutter hammer drill bits
Diablo made Dura-Carbide™ features up to 2X more carbide that withstands up to 1800°F of intense heat to combat rebar hits versus standard bits that fail at 800°F
Impact Resistant 4-Cutter Full Carbide Head extracts smaller bites of rebar for controlled, consistent carbide wear and reduced vibration to deliver fast, precise holes
Tri-Metal Fusion Welding features up to 3X stronger weld to keep the full carbide head intact during extreme impact such as rebar
Precision Tip delivers stability and accuracy required for fast, precise holes
Optimized flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability
Wear mark indicator ensures precise hole making
Optimized for maximum performance in corded and cordless SDS Plus or SDS Max rotary hammers

Cuts

Reinforced Concrete
Concrete
Rebar
Brick/Block

Applications

Reinforced concrete and concrete

Specifications

Diameter	5/8"
Length	18"
Number of Cutters	4
Pack Quantity	1
Shank	SDS Plus
Head Type	Full Carbide Head
Working Length	16"

Item#:

DMAPL4240

Manufacturer Item:

DMAPL4240

Your Price:

46.99

Each

Qty:

Diablo Tools 5/8 in. x 10 in. x 12 in. Rebar Demon™ SDS-Plus 4-Cut...

Diablo's revolutionary, most complete range of SDS-Plus and SDS-Max Rebar Demon™ 4-cutter full-carbide head hammer drill bits are the only bits designed to be the most durable, fastest and coolest solutions on the market. The Rebar Demon bits feature up to 2X more Dura-Carbide to withstand up to 1800°F of intense heat whereas standard bits fail at 800°F. Diablo's impact resistant 4-cutter full-carbide head withstands the stress of high-powered hammer drills and the impact of rebar by taking small bites of rebar to deliver controlled carbide wear, reduced vibration and up to 7X longer life. Produced with Tri-Metal Fusion Welding, the full-carbide head resists heat and prevents breakage in extreme impact situations. Precision Tip delivers the stability and accuracy required to produce fast, precise holes in reinforced concrete for anchor setting.

Applications

Reinforced concrete and concrete

Features

Up to 7X longer life versus standard 2-cutter hammer drill bits
Diablo made Dura-Carbide™ features up to 2X more carbide that withstands up to 1800°F of intense heat to combat rebar hits versus standard bits that fail at 800°F
Impact Resistant 4-Cutter Full Carbide Head extracts smaller bites of rebar for controlled, consistent carbide wear and reduced vibration to deliver fast, precise holes
Tri-Metal Fusion Welding features up to 3X stronger weld to keep the full carbide head intact during extreme impact such as rebar
Precision Tip delivers stability and accuracy required for fast, precise holes
Optimized flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability
Wear mark indicator ensures precise hole making
Optimized for maximum performance in corded and cordless SDS Plus or SDS Max rotary hammers

Cuts

Reinforced Concrete
Concrete
Rebar
Brick/Block

Specifications

Diameter	5/8"
Length	12"
Number of Cutters	4
Pack Quantity	1
Shank	SDS Plus
Head Type	Full Carbide Head
Working Length	10"

Item#:

DMAPL4230

Manufacturer Item:

DMAPL4230

Your Price:

34.99

Each

Qty: