S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Sanding, Grinding, Polishing Acy
Features
- Engineered to Last
- High quality ceramic grain allows DEWALT ELITE SERIES DWA8280 Flap Disc to last up to 75% longer than Norton flap disc.
- - Based on DWA8280 (4.5") versus Norton 34872 (4.5") grinding 1/4" 45# steel. Norton is a registered trademarks of Saint-Gobain Abrasives, Inc., which has not endorsed or approved this comparison
- Fast Material Removal
- Ceramic grain and premium backing cloth help provide long life and fast material removal
- Versatile Backing
- Type 29 backing helps with contouring edges
Specifications
| Length | 4.5 in |
| Width | 4.5 in |
| Height | 1 in |
| Weight | 0.24 lbs |
| Product Diameter Us | 4.5 in |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Prop 65 Generic Warning | No |
| Warranty | NLW |
| Arbor Size | 7/8 in |
| Blade Diameter | 4 1/2 in In. |
| Grade | Medium |
| Grit | 80 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Maximum Speed | 13300 RPM Rpm |
| Mineral | Ceramic Alumina |
| Wheel Diameter | 4.5 in In. |
Features
- Diamond segment SPEED-Edge slot design reduces vibration, providing high cutting speeds that deliver up to 30% faster cuts than standard segmented diamond discs
- 60% taller segments containing superior quality diamonds along with an ultra-durable bond to the disc body for up to 4x longer life
- Hardened disc body absorbs vibration and increases impact resistance to deliver superior quality cuts in hardened materials
- Optimized diamonds segments and diamond distribution lead to constant diamond exposure for maximum performance in high speed cutting applications
- Compatible with DM 7/8" and 5/8" arbors
- Includes one bushing: 5/8"
- For dry and wet cutting
Cuts
- Concrete
- Concrete with Rebar
- Brick/Block
Applications
- Cutting Masonry
Specifications
| Arbor | DM 7/8", 5/8' |
| Diameter | 6" |
| Kerf | 2.4mm |
| Pack Quantity | 1 |
| Max RPM | 10150 |
| Rim Design | Segmented Turbo |
Cuts
- Rebar
- Angle Iron
- Cast Iron
- Steel Bar
- Stainless Steel
Features
- Premium Aluminum Oxide Blend - a superior quality formulation designed for fast material removal and long cutting life
- For use on metal applications: steel, stainless, cast iron, sheet metal
- Type 27 - Depressed Center
Applications
- Cut-Off
Specifications
| Arbor | 5/8" |
| Diameter | 4" |
| Hub Type | 27 |
| Pack Quantity | 1 |
| Max RPM | 15250 |
| Thickness | 1/8" |
Features
- 3-IN-1 REINFORCED DESIGN: Grind, notch, and cut a range of materials while keeping productivity high
- 50% LONGER LIFE AND HIGH MATERIAL REMOVAL RATE: Get more done in less time using high-grade grains manufactured with sharp crystalline structure
- BUILT FOR EXTREME VERSATILITY: Fast cutting and light grinding in a variety of stainless and high strength alloys
Specifications
| Length | 4.5 in |
| Width | 4.5 in |
| Height | 0.8 in |
| Weight | 0.268 lbs |
| Product Diameter Us | 4.5 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Battery Required | No |
| Disclaimer | 56% longer life vs. existing grinding wheels (DWA8904) |
| Prop 65 Generic Warning | No |
| Warranty | MWC |
| 7/8 In Diamond Arbor Knockout | No |
| Arbor Size | 5/8 - 11 |
| Blade Diameter | 4 1/2 in In. |
| Blade Material | Ceramic |
| Cuts Into | Metal |
| Grit | Coarse |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Maximum Speed | 13300 RPM Rpm |
| Thickness | 0.09375 In |
| Tool Power Output | 360 UWO |
| Wheel Diameter | 4.5 in In. |
| Product Primary Material | Ceramic |
Diablo's premium detail triangle sanding sheets with Hook & Lock™ backing include break-through innovations that improve performance, extend sanding life and increase productivity. Featuring a premium ceramic blend, these discs remove material faster and offer extra-long sanding life than other sanding discs. Clog-SHIELD™, Diablo's own blend of grinding agents, reduces loading thus maximizing productivity. The superior grain bonding system, ENDURA-BOND™, provides Diablo's sanding discs with longer life and extreme durability.
Features
- Premium ceramic grain blend for fast material removal and extra-long sanding life
- Premium Hook and Lock backing for a consistent secure connection
- Clog-SHIELD™ reduces pitch build-up and clogging
- ENDURA-BOND™ provides superior grit to backing bond for extreme durability
- Maximum performance in leveling and heavy stock or paint removal
- Optimized for cordless and oscillating tools
Applications
- Final Finish
Cuts
- Wood
- Plastics
- Metal
- Solid Surface
Specifications
| Backing | Hook & Lock™ |
| Grit | 220 |
| Grit Blend | Ceramic Blend |
| Grit Description | Ultra Fine |
| Pack Quantity | 10 |
| Size | 3-3/4" |
Applications
- Hand Sanding
- Sanding
Specifications
| Width | 9 in |
| Length | 11 in |
| Grit | 120D |
| Weight | 0.0555 lb |
Applications
- Hand Sanding
- Sanding
Specifications
| Width | 9 in |
| Length | 11 in |
| Grit | 80D |
| Weight | 0.0695 lb |
Features
- A non-abrasive polishing/buffing pad, used dry or with a fine mist to yield a mirror gloss shine
- Due to the softness of the pad, abrasive products leave less of a scratch pattern
- Designed to achieve a consistent finish with a mirror gloss shine
- Can be used wet or dry
Applications
- Professional Cleaning
Specifications
| Diameter | 17 in. |
| Grade | No Grade |
Applications
- Hand Sanding
- Sanding
Specifications
| Width | 9 in |
| Length | 11 in |
| Grit | 180C |
| Weight | 0.0435 lb |
Features
- A thick pad for wet stripping applications that is aggressive, durable and consistent
- Durable and long lasting
- Open construction allow finish and stripping solutions resist clogging
- Resilient enough to conform to the floor surface for better coverage
Applications
- Professional Cleaning
Specifications
| Diameter | 17 in. |
| Grade | Fine |
Features
- Premium Aluminum Oxide Blend - a superior quality formulation designed for fast material removal and long sanding life
- High performance coating that reduces pitch build-up and clogging for maximum productivity
- High strength resin provides superior grit-to-backing bond for extreme durability
- A backing pad is needed in order to attach the fiber disc to a sanding or grinder
- Also use for wood, plastics, and fiberglass
Applications
- Fast removal/leveling
Cuts
- Rebar
- Angle Iron
- Cast Iron
- Steel Bar
Specifications
| Arbor | 7/8" |
| Diameter | 5" |
| Grit | 36 |
| Grit Description | Extra Coarse |
| Pack Quantity | 4 |
| Max RPM | 12200 |
Features
- Superior quality diamond edge rim design for up 60% smoother cuts, resulting in chip-free cuts without burn marks
- Hardened disc body absorbs vibration and increases impact resistance to deliver superior quality cuts in hardened materials
- Utlra-thin constant contact continuous turbo rim design provides precise cuts at high rates of speed
- Compatible with 5/8" arbor
- For dry and wet cutting
Cuts
- Granite
- Marble
- Porcelain
- Tile
Applications
- Cutting Masonry
Specifications
| Arbor | 5/8" |
| Diameter | 7" |
| Kerf | 1.6mm |
| Pack Quantity | 1 |
| Max RPM | 8450 |
| Rim Design | Continuous |
Applications
- Cutting Masonry
Features
- Taller segments containing superior quality diamonds along with an ultra-durable bond to the disc body for up to 2x longer life
- Hardened disc body absorbs vibration and increases impact resistance to deliver superior quality cuts in hardened materials
- Optimized diamonds segments and diamond distribution lead to constant diamond exposure for maximum performance in high speed cutting applications
- Compatible with DM 7/8" and 5/8" arbors
- Includes one bushing: 5/8"
- For dry and wet cutting
Cuts
- Concrete
- Concrete with Rebar
- Brick/Block
Specifications
| Arbor | DM 7/8", 5/8' |
| Diameter | 9" |
| Kerf | 2.4mm |
| Pack Quantity | 1 |
| Max RPM | 6650 |
| Rim Design | Segmented |
Features
- High Diamond concentration for long life and aggressive material removal
- Large Grinding segments with heat treated steel bodies which provides increases durability and wheel life
Specifications
| Length | 6.81 in |
| Width | 1.1 in |
| Height | 8.56 in |
| Weight | 1.2 lbs |
| Product Diameter Us | 4 in |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Prop 65 Generic Warning | No |
| Warranty | 30DLW |
| Claims Needed | No |
| Arbor Size | 5/8 - 11 |
| Grit | Fine |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Maximum Speed | 12200 RPM Rpm |
| Wheel Diameter | 5 in In. |
Diablo's universal fit high carbon steel oscillating scraper set delivers high-performance removal of soft and hard adhesives. This set includes two durable, high carbon steel blades for flexible and ridged scraping. The flexible design removes soft adhesives while the ridge design removes hard adhesives. The unique design of the blade body allows for easy access in hard to reach areas. The blade's universal fit, adapter-free design easily attaches to most tools, with the exception of Starlock tools.
Cuts
- Soft Adhesives
- Hard Adhesives
Features
- High carbon steel body for durable scraping and adhesive removal
- 2 in. flexible scraper for removal of soft adhesives
- 2 in. rigid scraper for removal of hard adhesives
- Unique blade designs for reach access in hard to reach areas
- Universal interface design fits most tools, no adapters needed
- Maximum performance in cordless and corded oscillating multi-tools from Bosch®, Craftsman®, Dewalt®, Dremel®, Fein®, Hart®, Makita®, Milwaukee®, Porter-Cable®, Ridgid®, Rockwell® and more
- Not compatible with Starlock tools
Applications
- Adhesive Removal
Specifications
| Pack Quantity | 2 |
| Tooth Design | High Carbon Steel |
| Interface | Universal Fit |
The A290 fine grit paper H&L vacuum disc combines a P-graded aluminum oxide abrasive for outstanding durability and fast cut action with a fiber-reinforced, flexible C-weight latex-saturated backing for strength. The open coat, water-based stearate No-Fil coating and vacuum holes help resist loading to ensure durability. Select the A290 vacuum disc for fine grit dry sanding and finishing applications involving aluminum, composites, fiberglass and wood. For convenient installation and removal, the disc features a hook and loop back.
Features
- P-graded aluminum oxide abrasive provides increased life, fast cut rate, consistent finish
- Unique fiber reinforced, flexible C-weight latex saturated backing increases tear strength while retaining flexibility
- Water-based stearate, No-Fil coating, open coat, and vacuum holes minimize loading and maximize dust collection and life
- Good choice and value for fine grit dry sanding, finishing, and micro-finishing aluminum, fiberglass, composites, hard woods and soft woods; hook and loop back for easy disc mounting and changing
Applications
- Finishing
- Microfinishing
- Sanding
Specifications
| Diameter | 5 in. |
| Abrasive | Aluminum Oxide |
| Attachment | Hook & Loop |
| Backing Material | C-wt. Anti Loading Paper |
| Max Operating Speed Guideline | Determined by back-up pad |
| Abrasive Type | Coated |
| Max Operating Speed RPM | 15000 |
| Grit Size | P150 |
| Number of holes | 5 |
| Grade | Fine |
Applications
- Surface Preparation
- Finishing
Specifications
| Diameter | 5" |
| Grit | 40 |
| Weight | 0.0304 lb |
Features
- Integrated Dual Blade Design for mortar joint removal at the ultimate speed
- Hardened disc body absorbs vibration and increases impact resistance to deliver superior quality cuts in hardened materials
- Optimized diamonds segments and diamond distribution lead to constant diamond exposure for maximum performance in high speed cutting applications
- Compatible with 7/8", 20mm and 5/8" arbors
- Includes two bushings: 20mm and 5/8"
- For dry cutting only
Cuts
- Concrete
Applications
- Mortar Joints Removal
Specifications
| Arbor | 7/8", 20mm, 5/8" |
| Diameter | 4-1/2" |
| Kerf | 6.1mm |
| Pack Quantity | 1 |
| Max RPM | 13280 |
| Rim Design | Tuck Point |
Specifications
| Height | 1.000 in |
| Length | 5.100 in |
| Width | 5.000 in |
| Weight | 0.125 lbs |
Cuts
- Rebar
- Angle Iron
- Cast Iron
- Steel Bar
- Stainless Steel
Features
- Premium ceramic blend for industrial performance and up to 6X longer life versus standard cut-off discs
- Flat disc (Type 1) for straight-on cuts
- Ideal for working in hard-to-access areas
- Fully reinforced for hand-held cutting
- Optimized for cordless and corded angle grinders
Applications
- Cut-Off
Specifications
| Arbor | 20mm |
| Diameter | 12" |
| Hub Type | 1/41 |
| Max RPM | 6360 |
| Thickness | 1/8" |
Features
- For use with Type 1/ Type 41 Thin High Speed Cut-Off Wheels up to 3" diameter only
Specifications
| Type | 1/4 x 3/8-24 |
Cuts
- Rebar
- Angle Iron
- Cast Iron
- Steel Bar
Features
- Premium Aluminum Oxide Blend - a superior quality formulation designed for fast material removal and long grinding life
- For use on metal applications: steel, stainless, cast iron, sheet metal
- Type 27 - Depressed Center
Applications
- Grinding
Specifications
| Arbor | 7/8" |
| Diameter | 5" |
| Hub Type | 27 |
| Pack Quantity | 1 |
| Max RPM | 12200 |
| Thickness | 1/4" |
Diablo's premium metal cut-off discs provide superior performance and increased productivity. Featuring a premium aluminum oxide blend, these discs cut through material faster than other cut-off discs and offer an extra long cutting life. Diablo's thin kerf design provides for a thin, fast cut with minimal burr formation. Unlike other bonded discs on the market, this cut-off disc is a true .4 in. design. Fully reinforced for use in hand-held cut-off work. Ideal for use when working in hard to reach areas.
Cuts
- Rebar
- Angle Iron
- Cast Iron
- Steel Bar
- Stainless Steel
Features
- Premium Aluminum Oxide Blend - a superior quality formulation designed for fast material removal and long cutting life
- Thin Kerf Design - provides for a thin cut; draws less power/less resistance; and allows your power tool to work at its full potential
- For use on metal applications: steel, stainless, cast iron, sheet metal
- Type 1 - Flat
Applications
- Cut-Off
Specifications
| Arbor | 5/8" |
| Diameter | 4" |
| Hub Type | 1 |
| Pack Quantity | 1 |
| Max RPM | 15250 |
| Thickness | 0.04" |
Ideal for collision repair and metal fabrication, the A275OP fine grit paper PSA vacuum disc roll gets the job done in a hurry thanks to the rugged, P-graded, heat-treated aluminum oxide abrasive, which combines durability and fast cutting action. The disc roll offers 50- to 60-percent improved tear resistance due to the fiber-reinforced, flexible B-weight latex-saturated backing. Featuring a water-based, nonpigmented stearate No-Fil coating, the disc rolls ensures zero color transfer while resisting loading and improving dust collection. The combination of a pressure sensitive adhesive and a linked disc roll design makes mounting and removal quick and simple.
Features
- Premium P-graded, heat treated, toughened aluminum oxide abrasive delivers superior life, fast cut rate, consistent finish
- Unique fiber reinforced, flexible B-weight latex saturated backing provides 50% - 60% improvement in tear strength while retaining flexibility
- Water-based, non-pigmented stearate No-Fil coating, open coat, and vacuum holes provide maximum load resistance and dust collection with no color transfer to work
- Better choice for high-performance fine grit dry sanding, finishing, and micro-finishing on all materials; pressure sensitive adhesive and linked disc roll format allow easy application, removal, and dispensing
Applications
- Blending
- Finishing
- Paint Removal
- Sanding
Specifications
| Diameter | 5 in. |
| Abrasive | Aluminum Oxide |
| Attachment | Pressure Sensitive Adhesive |
| Backing Material | B-wt. Anti Loading Paper |
| Max Operating Speed Guideline | Determined by back-up pad |
| Abrasive Type | Coated |
| Max Operating Speed RPM | 15000 |
| Number of holes | 5 |
| Grit Size | P150 |
| Grade | Fine |
Diablo's Starlock carbide oscillating blades feature application specific designs that deliver extreme durability and superior cutting life in general purpose cuts: nail-embedded wood, clean wood, metal and plastics. High-performance carbide teeth deliver an unmatched up to 50X longer cutting life versus standard bi-metal blades. Curve contact edge creates a pilot for precise, clean plunge cuts with less vibration. An optimized blade design and Black I.C.E. (Industrial Cooling Element) keeps the teeth cool and build up free for fast, clean cuts. Tool free quick-change interface fits Fein and other Starlock tools; also compatible with non-Starlock multi-tools.
Features
- 3-Pack provides up to 33% in savings
- High performance carbide for greater durability and up to 50X longer life versus standard bi-metal blades
- Curve Contact Edge for precise, clean plunge cuts with less vibration
- Black I.C.E. coated teeth for heat resistance, long life and superior chip evacuation
- 1-1/2 in. cutting depth
- Maximum performance in cordless and corded Fein® and other Starlock tools
- Also compatible with non-Starlock multi-tools from AEG®, Bosch®, Festool®, Makita®, Metabo®, Milwaukee®, Ridgid® and Rockwell®
- Not compatible with Craftsman®, Dewalt®, Dremel®, Hart® or Porter-Cable®
Cuts
- Nail Embedded Wood
- Clean Wood
- Metal
- PVC
- Plastics
Applications
- General Purpose
Specifications
| Cut Depth (C) | 1-1/2" |
| Pack Quantity | 3 |
| Tooth Design | Carbide |
| Width of Cut | 1-1/4" |
| Interface | Starlock |
A275OP medium grit paper PSA vacuum disc rolls feature a premium, P-grade, heat-treated and toughened aluminum oxide abrasive for superior speed, extended disc life and consistent finishes. They're the best choice for high-performance, dry medium grit blending, paint removal and sanding on all materials. Featuring vacuum holes and a water-based, non-pigmented stearate No-Fil open coating, these discs minimize loading and don't transfer color. The unique fiber-reinforced, latex-saturated B-weight backing stays flexible while increasing tear strength by 50 to 60 percent, while the pressure sensitive adhesive and linked-disc roll makes application, removal and dispensing quick and easy.
Features
- Premium P-graded, heat treated, toughened aluminum oxide abrasive delivers superior life, fast cut rate, consistent finish
- Unique fiber reinforced, flexible B-weight latex saturated backing provides 50% - 60% improvement in tear strength while retaining flexibility
- Water-based, non-pigmented stearate No-Fil coating, open coat, and vacuum holes provide maximum load resistance and dust collection with no color transfer to work
- Better choice for high-performance medium grit dry blending, paint removal, and sanding on all materials; pressure sensitive adhesive and linked disc roll format allow easy application, removal, and dispensing
Applications
- Blending
- Paint Removal
- Sanding
Specifications
| Diameter | 5 in. |
| Abrasive | Aluminum Oxide |
| Attachment | Pressure Sensitive Adhesive |
| Backing Material | B-wt. Anti Loading Paper |
| Max Operating Speed Guideline | Determined by back-up pad |
| Abrasive Type | Coated |
| Max Operating Speed RPM | 15000 |
| Grade | Medium |
| Number of holes | 5 |
| Grit Size | P120 |
Cuts
- Rebar
- Angle Iron
- Cast Iron
- Steel Bar
- Stainless Steel
Applications
- Cut-Off
Features
- Premium ceramic blend for industrial performance and up to 6X longer life versus standard cut-off discs
- Flat disc (Type 1) for straight-on cuts
- Ideal for working in hard-to-access areas
- Fully reinforced for hand-held cutting
- Optimized for cordless and corded angle grinders
Specifications
| Arbor | 7/8" |
| Diameter | 4-1/2" |
| Hub Type | 1 |
| Pack Quantity | 1 |
| Max RPM | 13280 |
| Thickness | 0.045" |
The DEWALT high performance metal grinding wheel is a professional solution for a range of grinding applications. The grinding wheel is made with high performance aluminum oxide for long life and high material removal and 3 full sheets of fiberglass for durability and safety. DEWALT developed a proprietary material mix to maximize the wheel's lifespan and help you minimize tool replacement costs. With a high grain concentration, you are assured of aggressive grinding action and smoother running wheels, no matter what the job.
Features
- High grain concentration for aggressive grinding action and smoother running wheels
- Proprietary material mix ensures durable long life wheels
- Durability and safety from the fiberglass
- High performance aluminum oxide grain for long life and high material removal
Specifications
| Length | 4.5 in |
| Width | 4.5 in |
| Height | 0.5 in |
| Weight | 0.394 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Warranty | 30DLW |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Material Group | METAL |
Diablo's universal fit bi-metal oscillating blades feature application specific designs that deliver maximum durability and longer life in metal. These high-performance blades feature an ultra-hardened cutting edge to deliver up to 5X longer life than standard blades. An optimized tooth design reduces vibration for fast and clean cuts. Black I.C.E. (Industrial Cooling Element) keeps the teeth cool and build up free for fast, clean cuts. The blade's universal fit, adapter-free design easily attaches most tools, with the exception of Starlock tools.
Features
- 3-Pack provides up to 33% in savings
- Ultra-hardened cutting edge for up to 5x longer life than standard blades
- Curve Contact Edge for precise, clean plunge cuts with less vibration
- Black I.C.E. coated teeth for heat resistance, long life and superior chip evacuation
- 2 in. cutting depth
- Universal interface design fits most tools, no adapters needed
- Maximum performance in cordless and corded oscillating multi-tools from Bosch®, Craftsman®, Dewalt®, Dremel®, Fein®, Hart®, Makita®, Milwaukee®, Porter-Cable®, Ridgid®, Rockwell® and more
- Not compatible with Starlock tools
Applications
- Metal
Cuts
- Metal
Specifications
| Cut Depth (C) | 2" |
| Pack Quantity | 3 |
| Tooth Design | Bi-Metal |
| Width of Cut | 1-1/4" |
| Interface | Universal Fit |
The DEWALT high performance metal grinding wheel is a professional solution for a range of grinding applications. The grinding wheel is made with high performance aluminum oxide for long life and high material removal and 3 full sheets of fiberglass for durability and safety. DEWALT developed a proprietary material mix to maximize the wheel's lifespan and help you minimize tool replacement costs. With a high grain concentration, you are assured of aggressive grinding action and smoother running wheels, no matter what the job.
Features
- High grain concentration for aggressive grinding action and smoother running wheels
- Proprietary material mix ensures durable long life wheels
- Heavy-duty cutting and grinding of ferrous metal such as steel, iron
- High performance aluminum oxide grain for long life and high material removal
- Weld blending and edge grinding
- 3 full sheets of fiberglass for durability and safety
Specifications
| Length | 4.5 in |
| Width | 4.5 in |
| Height | 0.9 in |
| Weight | 0.528 lbs |
| Product Diameter Us | 0.012 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Prop 65 Generic Warning | No |
| Warranty | 30DLW |
| Claims Needed | No |
| Arbor Size | 5/8 - 11 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Maximum Speed | 13300 RPM Rpm |
| Thickness | 0.25 In |
| Wheel Diameter | 4.5 in In. |
| Product Primary Material | Aluminum Oxide |
Features
- Constructed with internal holding plate to ensure consistency and safety
- Wire is 100% inspected to meet demanding quality specifications
Specifications
| Length | 7.323 in |
| Width | 3.425 in |
| Height | 8.9 in |
| Weight | 2.36 lbs |
| Product Diameter Us | 6 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Warranty | 30DLW |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Features
- Constructed with internal holding plate to ensure consistency and safety
- Wire is 100% inspected to meet demanding quality specifications
Specifications
| Length | 5.16 in |
| Width | 2.835 in |
| Height | 7.835 in |
| Weight | 1.18 lbs |
| Product Diameter Us | 4 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Warranty | MWC |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Bite down deep into the bricks and blocks you're cutting, or slice the stock away from a hard-surfaced workpiece, with this durable Masonry C SC Type 27 grinding wheel. This wheel uses a sharp silicon carbide grain to penetrate deep into hard earthen materials with a straight cut that makes quick work of difficult cut-and-sort jobs. The resilient bond and extra hard wheel coating give you an excellent blend of a high cut rate and long wheel life. Choose this Masonry grinding wheel when a low initial price is your top purchasing criteria.
Features
- Sharp silicon carbide grain for penetration of masonry and very hard non-metallic materials
- 1/4 in. wheel designed for offhand stock removal
- Durable bond and wheel hardness are designed to provide the best mix of cut rate and life
- Good choice when low initial price is needed for small jobs or inexperienced operators
Applications
- Stock Removal
Specifications
| Diameter | 7 in. |
| Abrasive | Silicon Carbide |
| Wheel type | Type 27 |
| Thickness | 1/4 In. |
| Max Operating Speed RPM | 8600 |
| Arbor hole | 5/8 In. - 11 |
| Specifications | NORTON MASONRY |
