S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Drill Bits and Extension Sets
3/4" - 130-AG 1/2 SHK SUPER PRM
Specifications
| Cutting depth (in) | 1 |
| Cutting depth (mm) | 25 |
| Bore dia. (in) | 1 |
| Bore dia. (mm) | 25.4 |
Specifications
| Cutting depth (in) | 2 |
| Cutting depth (mm) | 50 |
| Bore dia. (in) | 1 |
| Bore dia. (mm) | 25.4 |
Milwaukee® Step drill bits with jam-free performance feature a dual-flute design delivering up to 2X faster hole times, up to 4X longer life and up to 50% more holes per battery charge than competitors. Ideal for drilling small and large-diameter holes in steel and plastic, these bits are optimized for cordless drills in high speed. The Rapid Strike™ tip allows for a fast and accurate start that generates less heat, resulting in longer bit tip life. Black oxide coating also enhances durability, hole quality and bit life. For user convenience and accuracy, each bit has laser-engraved reference marks you can see while drilling. The 3-flat Secure-Grip™ shank ensures a solid connection with the drill chuck. The step drill bit 3-piece set includes bits #1 (48-89-9201), #2 (48-89-9202) and #4 (48-89-9204). Jam-free performance in high speed with most professional 18 Volt cordless drills with lithium-ion battery technology.
Features
- JAM-FREE Performance - Dual-flute design provides greater speed and control
- Up to 2X faster - optimized for cordless drills in high speed
- Rapid Strike™ tip - creates fast, accurate starts and generates less heat
- Up to 4X longer bit life - optimized geometry with black oxide coating to cut faster and produce less heat
- Up to 50% more holes per battery charge - greater user productivity
- Laser-engraved reference marks - easily stop on any hole size
- 3-Flat Secure-Grip™ shanks - reduces bit slippage in the chuck
- Made in the USA
Specifications
| Bit Sizes | 1/8"-1/2", 3/16"-1/2", 3/16"-7/8" |
| Case Included | Yes |
| Bit Type | Step |
| Pieces | 3.000000 |
| Recommended Safety Equipment | Safety Glasses |
| Bit Material | Black Oxide |
| Single / Double Ended | Single |
Diablo's socket adapters deliver ultimate performance and maximum durability in converting impact and standard drill drivers into socket wrenches. An ultra-strength pin prevents slippage by securely griping sockets when tightening and removing nuts and bolts. These hi-performance adapters are compatible with standard and deep well sockets and allows users to convert impact and drill drivers into square socket wrenches. Torque Resistant Design absorbs torque for less stress on the adapter and the socket. This range is Impact Strong™, delivering increased shank stability and durability in cordless and corded impact and drill drivers.
Features
- Extreme durability and impact resistance when tightening and removing screws and fasteners
- Easily convert impact drivers and standard drill drivers into socket wrenches
- Compatible with standard and deep well sockets
- Ultra-strength pin allows for better retention to the socket
- Torque Resistant Design for less stress on the adapter and the socket
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 2" |
| Pack Quantity | 1 |
| Adapter Size | 1/4" Hex to 3/8" Square |
| Screwdriver Style | Hex |
Applications
- Drills clean wood
- nail-embedded wood
- plastic
- aluminum
- metal
- cast iron and stainless steel
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool-free plug ejection for fast material removal
- 50x longer cutting life
Specifications
| Diameter | 2-3/8" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool-free plug ejection for fast material removal
- 50x longer cutting life
Applications
- Drills clean wood
- nail-embedded wood
- plastic
- aluminum
- metal
- cast iron and stainless steel
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Specifications
| Diameter | 1-1/8" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
Diablo's high-performance carbide teeth hole cutters deliver 50-times longer cutting life, faster cutting performance and maximum productivity. An optimized carbide tooth geometry provides fast, burr-free holes that require virtually no rework. The depth stop collar maximizes productivity by providing a controlled drilling experience and limiting drilling depth. The combination of a tool-free plug ejection system and spring-loaded plug eject Cobalt pilot bit makes plug removal fast and efficient. Diablo's hole cutters are compatible with Diablo's SnapLock™ PLUS mandrel resulting in quick, easy and effortless cup changes.
Features
- Up to 50x longer cutter life in metal cutting versus standard bi-metal hole saws
- Depth Stop Collar for controlled and efficient hole drilling
- Plug Eject Cobalt Pilot Bit prevents overfeeding and allows for easy removal of plugs
- Tool-free plug ejection for fast material removal
- Compatible with Diablo's SnapLock™ PLUS mandrel for quick and easy cup changes with no down time
- Drills up to 1/4 in. metals, including sheet metals, electrical panels & steel studs
- For use with a drill press or hand-held drill
Applications
- Drills holes in metal
Cuts
- Metal
- Sheet
- Electrical Panels
- Steel Studs
Specifications
| Diameter | 1-1/8" |
| Length | 1/4" |
| Shank | Diablo Mandrel |
Specifications
| Cutting depth (in) | 1 |
| Cutting depth (mm) | 25 |
| Bore dia. (in) | 7/16 |
| Bore dia. (mm) | 11.11 |
Specifications
| Cutting depth (in) | 2 |
| Cutting depth (mm) | 50 |
| Bore dia. (in) | 7/16 |
| Bore dia. (mm) | 11.11 |
The MILWAUKEE® 19-Piece HOLE DOZER™ Electrician Hole Saw Kit features a new 3.5TPI tooth design that offers users the longest life in metal applications. These HOLE DOZER™ Bi-Metal Hole Saws feature the industry's only Lifetime Tooth Break Warranty and can take on all general purpose applications, making them the most durable hole saws. Our ALL-ACCESS SLOTS solve the frustration of plug removal, making users more productive with less downtime between holes. The new slot design also gives users increased pilot visibility for accurate placement and faster chip ejection keeping their cut cool. HOLE DOZER™ Thermoset Coating allows for faster cutting and is optimized for cordless tools, delivering users 25% more holes per charge. Milwaukee HOLE DOZER™ Bi-Metal hole saws are proudly made in the USA. The included Milwaukee Hole Saw Case offers enhanced customization capability thanks to the interchangeable pegs. Store arbors, pilot bits and more in the removable accesory box or remove it to create more space for hole saw storage. Each Milwaukee Hole Saw Case boasts a reinforced grid design on both top and bottom plus heavy duty latches, allowing for hole saws to be securely stored within this durable, hard case design.
Features
- Most Durable Hole Saw. Period.
- New 3.5TPI Tooth Design
- Customizable Hole Saw Case
- All-Access Slots for Easy Plug Removal
- Thermoset Coating for Faster Cutting
- Interchangeable Pegs Allow for Customizeable Kit Configurations
- Reinforced Grids on Top and Bottom Keep Hole Saws Securely Stored
- Removable Accessory Box Offers Additional Customization Options
- Made in USA
Specifications
| Bit Sizes | 3/4in., 7/8in., 1 1/8in., 1 3/8in., 1 1/2in., 1 3/4in., 2in., 2 1/4in., 2 1/2in., 2 5/8in., 3in., 3 5/8in., 4 1/8in., 4 3/4in. |
| Case Included | Yes |
| Bit Type | Hole Saw |
| Pieces | 19.0 |
| Bit Material | High Speed Steel |
| Teeth per Inch | 6 teeth per inch |
| Bit Diameter | 3/4, 7/8, 1-1/8, 1-3/8, 1-1/2, 1-3/4, 2, 2-1/4, 2-1/2, 2-5/8, 3, 3-5/8, 4-1/8, 4-3/4 |
| Hole Saw Type | Multipurpose |
| Kit | Yes |
| Recommended Safety Equipment | Safety glasses |
| Single / Double Ended | Single |
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Applications
- Drills wood
- plastic
- aluminum
- metal
- stainless steel
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool free plug ejection for fast material removal
- Variable Tooth Design provides faster cuts with less vibration
Specifications
| Diameter | 4-1/2" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool-free plug ejection for fast material removal
- 50x longer cutting life
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Applications
- Hole Cutting - woods
- plastics
- metals
Specifications
| Diameter | 2-9/16" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
The Milwaukee® 3/4 in. x 18 in. Ship auger bit drills through up to 2X the nails of competitive auger bits without needing resharpening. Drill into clean or nail-embedded wood with confidence when installing Romex wire, PEX water lines, rebar, bolts, and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. The through-center cutting design creates a more solid striking point against nails compared to the competitions' ahead-of-center and behind-center designs. The longer shaft length makes it easy to drill deeper or overhead without an extension.
Features
- Durable - Hardened, one-face 20 degree rake angle design enhances nail resistance, chip removal and fast, easy sharpening
- Fast chip removal - Nonstick, polished and coated flutes eliminate costly cleaning time
- Impact-rated shank - Strong enough to use with an impact wrench
- Versatile - One line of Milwaukee® auger bits covers all applications and tools
Specifications
| Bit Diameter | 3/4" |
| Bit Material | Alloy Steel |
| Case Included | No |
| Bit Type | Auger |
| Drilling Depth (in) | 15.0 |
| Length | 18.0 Inches |
| Self Feeding | Yes |
| Shank Diameter (in) | 0.4375 |
| Minimum Chuck Size Required | 1/2 in |
| Flute Length (in) | 15.0 |
| Single / Double Ended | Single |
The Milwaukee® retractable starter bit provides accurate centering in less time when cutting tile, stone and glass. You'll cut clean, accurate holes faster when you use the retractable starter bit with Diamond Plus™ threaded hole saws. Diamond Plus™ hole saws deliver the best-in-class performance and the lowest cost per hole on the market with up to 10X longer life. With the highly durable retractable starter bit, no pilot holes are required. Its 1/4 in. size fits standard hole saw arbors. Use it with Diamond Plus™ threaded hole saws to increase your productivity when cutting hard, abrasive materials.
Features
- Increase productivity - no pilot hole required
- Improve accuracy - hard Carbide retractable bit securely marks hole center
- Versatile - fits standard hole saw arbors
- Fits hole saw sizes - 3/16 in. to 1-1/8 in.
Specifications
| Bit Diameter | 1/4 in. |
| Bit Material | Carbide Tipped |
| Bit Type | Specialty |
| Length | 2.0 Inches |
| Shank Diameter (in) | 0.25 |
| Flute Length (in) | 0.0 |
| Minimum Chuck Size Required | 1/4 in |
| Single / Double Ended | Single |
| Drill Bit Shank Design | Straight |
| Recommended Safety Equipment | Safety Glasses |
Diablo's Auger Bit range provides maximum performance, extreme durability and superior life in nail-embedded wood applications. A two-step cutting action creates holes that are precise and clean. The self-feeding Dura-Tip™ pulls the bit while the dual cutting edge delivers an effortless, smooth drilling experience in wood with nails. Deep flutes enhance the chip evacuation process for more holes per charge. Quick change shank increases stability and durability in cordless and corded impact wrenches and drill drivers.
Features
- Two-step cutting action for precise, clean holes in wood drilling applications
- Dura-Tip™ for extreme durability in nail-embedded wood
- Dual cutting edge design for effortless, smooth hole drilling in nail-embedded wood
- Deep flutes for fast chip removal
- 7/16 in. hex quick change shank increases stability and durability in cordless and corded impact wrenches and drill drivers
Cuts
- Hardwoods
- Softwoods
- Nail Embedded Wood
- Plywood
Applications
- Drilling clean wood and nail-embedded wood
Specifications
| Diameter | 1-1/8" |
| Length | 17-1/2" |
| Pack Quantity | 1 |
| Shank | Hex 7/16" |
| Working Length | 13-1/2" |
Milwaukee® THUNDERBOLT® pilot bits are designed for extreme durability and long life. The THUNDERBOLT® web features a thicker core than a standard pilot bit, which provides ultimate strength and protects against side-load breakage. A specially designed parabolic flute form clears chips and debris fast to keep the bit cool. A precision start, 135° split point tip starts on contact to keep the bit from walking for fast, accurate holes. Excellent for drilling on curved surfaces, requires less effort to drill and is highly recommended for use with portable drills.
Features
- THUNDERBOLT® tapered web for added durability
- 135° split point provides accurate hole placement
- 3-flat shank won't slip in Arbor or chuck
- Parabolic flute clears chips faster
Specifications
| Bit Diameter | 1/4 in. |
| Bit Material | High Speed Steel |
| Bit Type | Specialty |
| Length | 3.5 Inches |
| Shank Diameter (in) | 0.25 |
| Flute Length (in) | 2.0 |
| Minimum Chuck Size Required | 1/4 in |
| Single / Double Ended | Single |
| Drill Bit Shank Design | 3-Flat |
| Recommended Safety Equipment | Safety Glasses |
Diablo's Auger Bit range provides maximum performance, extreme durability and superior life in nail-embedded wood applications. A two-step cutting action creates holes that are precise and clean. The self-feeding Dura-Tip™ pulls the bit while the dual cutting edge delivers an effortless, smooth drilling experience in wood with nails. Deep flutes enhance the chip evacuation process for more holes per charge. Quick change shank increases stability and durability in cordless and corded impact wrenches and drill drivers.
Applications
- Drilling clean wood and nail-embedded wood
Features
- Two-step cutting action for precise, clean holes in wood drilling applications
- Dura-Tip™ for extreme durability in nail-embedded wood
- Dual cutting edge design for effortless, smooth hole drilling in nail-embedded wood
- Deep flutes for fast chip removal
- 7/16 in. hex quick change shank increases stability and durability in cordless and corded impact wrenches and drill drivers
Cuts
- Hardwoods
- Softwoods
- Nail Embedded Wood
- Plywood
Specifications
| Diameter | 1-3/8" |
| Length | 17-1/2" |
| Pack Quantity | 1 |
| Shank | Hex 7/16" |
| Working Length | 13-1/2" |
Features
- Carbide Tipped for long life in highly abrasive materials such as fiber cement and ceramic materials.
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time.
- 4" (105mm) bit fits Diablo deep cut hole saws.
Applications
- Drills fiber cement
- ceramic materials.
Cuts
- Fiber Cement
- Ceramics
Specifications
| Diameter | 9/32" |
| Length | 4" |
| Shank | 1/4 in. hex |
Applications
- Drills hardened metals
- cast iron
- stainless steel.
Cuts
- Cast Iron
- Metal
- Stainless Steel
Features
- Cuts hardened metals, cast iron, and stainless steel.
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time.
- Elevated performance in high heat applications.
Specifications
| Diameter | 9/32" |
| Length | 4" |
| Shank | 1/4 in. hex |
Features
- Extreme durability and impact resistance for up to 50X longer life versus standard bits
- Torque Resistant Design for less stress on the tip
- Optimized tip design reduces wear, minimizes breakage and prevents slippage
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 6" |
| Pack Quantity | 1 |
| Shank | 1/4" Hex |
| Screwdriver Head | PH2 |
| Screwdriver Style | Phillips |
