S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Drill Bits and Extension Sets
Features
- Extreme durability and impact resistance in driving hex nuts and self-tapping screws
- Permanent magnet eliminates wobbling by securely gripping screws and hex nuts
- Torque Resistant Design for less stress on the tip
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 1-7/8" |
| Pack Quantity | 1 |
| Shank | 1/4" Hex |
| Nutsetter Size | 3/8" |
Features
- Unmatched cuts in porcelain
- Maximum diamond durability and retention
- Fastest cutting in porcelain
- Faster starts and less slipping
- More cutting, less clogging
- Dip bit in water before each cut
- Easy Plug Removal
- For use with Retractable Starter Bit Arbors
Specifications
| Hole Saw Diameter | 2 in in |
| Hole Saw Material | Diamond Coated |
| Bit Type | Hole Saw |
| Hole Saw Type | Multipurpose |
| Length | 0.55 Inches |
| Drilling Depth | 0.5 in |
| Minimum Chuck Size Required | 1/4 in |
| Teeth per Inch | 3, Grit |
| Case Included | No |
| Kit | No |
| Recommended Safety Equipment | Safety Glasses |
| Package Contents | (1) 2-1/2" Diamond Max Hole Saw (49-56-5660) |
Features
- Assorted pack includes three Phillips drive bits: #1, #2 and #3
- Extreme durability and impact resistance for up to 50X longer life versus standard bits
- Torque Resistant Design for less stress on the tip
- Optimized tip design reduces wear, minimizes breakage and prevents slippage
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 1" |
| Pack Quantity | 3 |
| Screwdriver Head | PH Variety |
| Screwdriver Style | Phillips |
Features
- Unmatched cuts in porcelain
- Maximum diamond durability and retention
- Fastest cutting in porcelain
- Faster starts and less slipping
- More cutting, less clogging
- Dip bit in water before each cut
- Easy Plug Removal
- For use with Retractable Starter Bit Arbors
Specifications
| Hole Saw Diameter | 2 in in |
| Hole Saw Material | Diamond Coated |
| Bit Type | Hole Saw |
| Hole Saw Type | Multipurpose |
| Length | 0.55 Inches |
| Drilling Depth | 0.5 in |
| Minimum Chuck Size Required | 1/4 in |
| Teeth per Inch | 4, Grit |
| Case Included | No |
| Kit | No |
| Recommended Safety Equipment | Safety Glasses |
| Package Contents | (1) 2" Diamond Max Hole Saw (49-56-5645) |
Choose the Milwaukee® Diamond Plus™ hole saw for up to 10X longer life when cutting tile, stone and glass. Diamond Plus™ hole saws deliver best-in-class performance, with higher grade diamonds for maximum heat and fracture resistance. An improved braze provides superior diamond retention when cutting hard, abrasive materials. The one-piece hole saw has a 1/4 in. quick change hex shank and features a large slug ejection slot. Designed as the single cutting solution for all tile, stone, and glass applications, Diamond Plus™ offers the lowest cost-per-hole on the market.
Features
- Diamond Plus™ - greater durability and toughness delivers up to 10X longer life
- Higher grade diamonds and improved braze - provide best-in-class performance
- Large slug ejection slot - offers easy plug removal
- Versatile - ideal for cutting anchoring and clearance holes in all tile, stone and glass
Specifications
| Hole Saw Diameter (in) | 1-1/2 in |
| Hole Saw Material | Diamond Coated |
| Bit Type | Hole Saw |
| Hole Saw Type | Multipurpose |
| Length | 0.55 Inches |
| Drilling Depth (in) | 0.5 |
| Pilot Bit Diameter (in) | 0.0 |
| Minimum Chuck Size Required | 1/4 in |
| Teeth per Inch | 3 |
| Case Included | No |
| Kit | No |
| Recommended Safety Equipment | Safety Glasses |
| Package Contents | 1 Bit |
Specifications
| Length | 4 in |
| Weight | 0.634931 oz |
| System of Measurement | Fractional |
| Size | 1/4 |
| Surface Finish | Gold Oxide |
| Type Norseman | 190-AL |
| Material | High-Speed Steel |
| Flute Length | 2-3/4 in |
| Length Class | Jobber Length |
| Shank Type | Round |
| Bit Style | Spiral Flute |
| Point | 135° Split-Point |
| Flute Direction | Left Hand |
| Specification | NAS 907B |
| Packaging | Envelope |
| Number of Flutes | 2 |
| DFARS | Specialty Metals COTS- Exempt |
| USMCA Qualifying | Yes |
| HTS | 820750.5 |
Choose the Milwaukee® Diamond Plus™ hole saw for up to 10X longer life when cutting tile, stone and glass. Diamond Plus™ hole saws deliver best-in-class performance, with higher grade diamonds for maximum heat and fracture resistance. An improved braze provides superior diamond retention when cutting hard, abrasive materials. The one-piece hole saw has a 1/4 in. quick change hex shank and features a large slug ejection slot. Designed as the single cutting solution for all tile, stone, and glass applications, Diamond Plus™ offers the lowest cost-per-hole on the market.
Features
- Diamond Plus™: greater durability and toughness delivers up to 10X longer life
- Higher grade diamonds and improved braze: provide best-in-class performance
- Large slug ejection slot: offers easy plug removal
- Versatile: ideal for cutting anchoring and clearance holes in all tile, stone and glass
Specifications
| Hole Saw Diameter (in) | 1-1/4 in |
| Hole Saw Material | Diamond Coated |
| Bit Type | Hole Saw |
| Hole Saw Type | Multipurpose |
| Length (in) | 0.55 |
| Drilling Depth (in) | 0.5 |
| Minimum Chuck Size Required | 1/4 in |
| Teeth per Inch | 3 |
| Case Included | No |
| Kit | No |
| Recommended Safety Equipment | Safety Glasses |
| Package Contents | 1 Bit |
Features
- 1/4 in. round shank
- High-speed steel construction provides strength and durability
- Fits all hole saws up to 1-3/16 in.
- Fits all drill chucks 1/4 in. and larger
Specifications
| Arbor Design | Hole Saw |
| Backing Plate Diameter | 0.250000 in |
| Color / Finish | Steel |
| Diameter | 0.25 in |
| Brand / Model Compatibility | 49-56-8000, 49-56-8002, 49-56-8005 |
| Inside Diameter | 0.250000 in |
| Outside Diameter | 0.250000 in |
| Length | 4.2 Inches |
| Material | High Speed Steel |
| Minimum Chuck Size Required | 1/4 in |
Choose the Milwaukee® Diamond Plus™ hole saw for up to 10X longer life when cutting tile, stone and glass. Diamond Plus™ hole saws deliver best-in-class performance, with higher grade diamonds for maximum heat and fracture resistance. An improved braze provides superior diamond retention when cutting hard, abrasive materials. The one-piece hole saw has a 1/4 in. quick change hex shank and features a large slug ejection slot. Designed as the single cutting solution for all tile, stone, and glass applications, Diamond Plus™ offers the lowest cost-per-hole on the market.
Features
- Diamond Plus™ - greater durability and toughness delivers up to 10X longer life
- Higher grade diamonds and improved braze - provide best-in-class performance
- Large slug ejection slot - offers easy plug removal
- Versatile - ideal for cutting anchoring and clearance holes in all tile, stone and glass
Specifications
| Hole Saw Diameter (in) | 1-3/8 in |
| Hole Saw Material | Diamond Coated |
| Bit Type | Hole Saw |
| Hole Saw Type | Multipurpose |
| Length | 0.55 Inches |
| Drilling Depth (in) | 0.5 |
| Pilot Bit Diameter (in) | 0.0 |
| Minimum Chuck Size Required | 1/4 in |
| Teeth per Inch | 3 |
| Case Included | No |
| Kit | No |
| Recommended Safety Equipment | Safety Glasses |
| Package Contents | 1 Bit |
Choose the Milwaukee® Diamond Plus™ hole saw for up to 10X longer life when cutting tile, stone and glass. Diamond Plus™ hole saws deliver best-in-class performance, with higher grade diamonds for maximum heat and fracture resistance. An improved braze provides superior diamond retention when cutting hard, abrasive materials. The one-piece hole saw has a 1/4 in. quick change hex shank and features a large slug ejection slot. Designed as the single cutting solution for all tile, stone, and glass applications, Diamond Plus™ offers the lowest cost-per-hole on the market.
Features
- Diamond Plus™: greater durability and toughness delivers up to 10X longer life
- Higher grade diamonds and improved braze: provide best-in-class performance
- Large slug ejection slot: offers easy plug removal
- Versatile: ideal for cutting anchoring and clearance holes in all tile, stone and glass
Specifications
| Hole Saw Diameter (in) | 1-1/8 in |
| Hole Saw Material | Diamond Coated |
| Bit Type | Hole Saw |
| Hole Saw Type | Multipurpose |
| Length (in) | 0.55 |
| Drilling Depth (in) | 0.5 |
| Minimum Chuck Size Required | 1/4 in |
| Teeth per Inch | 3 |
| Case Included | No |
| Kit | No |
| Recommended Safety Equipment | Safety Glasses |
| Package Contents | 1 Bit |
Features
- Drill, countersink and counterbore in one step
- Four-cutter countersink and tapered drill bit provide superior speed and ideal finish
- Replacement tapered bits offered
Specifications
| Length | 3.888 in |
| Width | 0.75 in |
| Height | 7.75 in |
| Weight | 0.22 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Prop 65 Generic Warning | Yes |
| Warranty | MWC |
| California Prop 65 Warning Label | http://images.salsify.com/image/upload/s--GK8MnSRs--/aq37mya9pqnhhhehoftu.pdf |
| Claims Needed | No |
| Bit Type | Set |
| Individual Vs. Set (Syndigo) | SET |
| Self Feeding | No |
| Shank Type | Straight |
| Product Primary Material | High Speed Steel |
Specifications
| Cutting depth (in) | 2 |
| Cutting depth (mm) | 50 |
| Bore dia. (in) | 15/16 |
| Bore dia. (mm) | 23.81 |
Features
- System includes: (1) 3/8" Hex Shank Mandril, (1) 1/2" Adaptor Nut, and (1) 5/8" Adaptor Nut
- 60mm (2-3/8 in) cutting depth for deeper holes in one pass and increased productivity
- Snap-Lock Plus™ mandrel system allows a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool free plug ejection for fast material removal
- 1/2" and 5/8" thread adapter nuts convert other hole saw brands to Snap-Lock Plus™
Applications
- Drills wood
- plastic
- aluminum
- metal
- stainless steel
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Specifications
| Shank | 3/8" Hex. |
Specifications
| Length | 18 in |
| Weight | 8.5363 oz |
| System of Measurement | Fractional |
| Size | 3/8 |
| Surface Finish | Bright |
| Type Norseman | 165 |
| Material | High-Speed Steel |
| Flute Length | 12 in |
| Length Class | Extra Length |
| Shank Type | Round |
| Bit Style | Spiral Flute |
| Point | 118° Split-Point |
| Flute Direction | Right Hand |
| Specification | General Purpose |
| Packaging | Tubed |
| Number of Flutes | 2 |
| DFARS | Specialty Metals COTS- Exempt |
| USMCA Qualifying | Yes |
| HTS | 820750.5 |
Specifications
| Length | 2.63 in |
| Weight | 0.070548 oz |
| System of Measurement | Fractional |
| Size | 7/64 |
| Surface Finish | Black And Gold |
| Type Norseman | 190-AG |
| Material | High-Speed Steel |
| Flute Length | 1.5 in |
| Length Class | Jobber Length |
| Shank Type | Round |
| Bit Style | Spiral Flute |
| Point | 135° Split-Point |
| Flute Direction | Right Hand |
| Specification | NAS 907B |
| Packaging | Envelope |
| Number of Flutes | 2 |
| DFARS | Specialty Metals COTS- Exempt |
| USMCA Qualifying | Yes |
| HTS | 820750.5 |
Specifications
| Length | 2.25 in |
| Weight | 0.035276 oz |
| System of Measurement | Fractional |
| Size | 3/32 |
| Surface Finish | Black And Gold |
| Type Norseman | 190-AG |
| Material | High-Speed Steel |
| Flute Length | 1.25 in |
| Length Class | Jobber Length |
| Shank Type | Round |
| Bit Style | Spiral Flute |
| Point | 135° Split-Point |
| Flute Direction | Right Hand |
| Specification | NAS 907B |
| Packaging | Envelope |
| Number of Flutes | 2 |
| DFARS | Specialty Metals COTS- Exempt |
| USMCA Qualifying | Yes |
| HTS | 820750.5 |
Specifications
| Length | 3.25 in |
| Weight | 0.211644 oz |
| System of Measurement | Fractional |
| Size | 11/64 |
| Surface Finish | Black And Gold |
| Type Norseman | 190-AG |
| Material | High-Speed Steel |
| Flute Length | 2.13 in |
| Length Class | Jobber Length |
| Shank Type | Round |
| Bit Style | Spiral Flute |
| Point | 135° Split-Point |
| Flute Direction | Right Hand |
| Specification | NAS 907B |
| Packaging | Envelope |
| Number of Flutes | 2 |
| DFARS | Specialty Metals COTS- Exempt |
| USMCA Qualifying | Yes |
| HTS | 820750.5 |
5/8" - 130-AG 1/2 SHK SUPER PRM
Specifications
| Length | 2 in |
| Weight | 0.035275 oz |
| System of Measurement | Fractional |
| Size | 5/64 |
| Surface Finish | Black And Gold |
| Type Norseman | 190-AG |
| Material | High-Speed Steel |
| Flute Length | 1 in |
| Length Class | Jobber Length |
| Shank Type | Round |
| Bit Style | Spiral Flute |
| Point | 135° Split-Point |
| Flute Direction | Right Hand |
| Specification | NAS 907B |
| Packaging | Envelope |
| Number of Flutes | 2 |
| DFARS | Specialty Metals COTS- Exempt |
| USMCA Qualifying | Yes |
| HTS | 820750.5 |
Specifications
| Length | 1.88 in |
| Weight | 0.035274 oz |
| System of Measurement | Fractional |
| Size | 1/16 |
| Surface Finish | Black And Gold |
| Type Norseman | 190-AG |
| Material | High-Speed Steel |
| Flute Length | 0.88 in |
| Length Class | Jobber Length |
| Shank Type | Round |
| Bit Style | Spiral Flute |
| Point | 135° Split-Point |
| Flute Direction | Right Hand |
| Specification | NAS 907B |
| Packaging | Envelope |
| Number of Flutes | 2 |
| DFARS | Specialty Metals COTS- Exempt |
| USMCA Qualifying | Yes |
| HTS | 820750.5 |
Specifications
| Length | 3.88 in |
| Weight | 0.493836 oz |
| System of Measurement | Fractional |
| Size | 15/64 |
| Surface Finish | Black And Gold |
| Type Norseman | 190-AG |
| Material | High-Speed Steel |
| Flute Length | 2.63 in |
| Length Class | Jobber Length |
| Shank Type | Round |
| Bit Style | Spiral Flute |
| Point | 135° Split-Point |
| Flute Direction | Right Hand |
| Specification | NAS 907B |
| Packaging | Envelope |
| Number of Flutes | 2 |
| DFARS | Specialty Metals COTS- Exempt |
| USMCA Qualifying | Yes |
| HTS | 820750.5 |
Milwaukee® THUNDERBOLT® pilot bits are designed for extreme durability and long life. The THUNDERBOLT® web features a thicker core than a standard pilot bit, which provides ultimate strength and protects against side-load breakage. A specially designed parabolic flute form clears chips and debris fast to keep the bit cool. A precision start, 135º split point tip starts on contact to keep the bit from walking for fast, accurate holes. Excellent for drilling on curved surfaces, requires less effort to drill and is highly recommended for use with portable drills.
Features
- THUNDERBOLT® tapered web for added durability
- 135-Degrees split point provides accurate hole placement
- 3-flat shank won't slip in Arbor or chuck
- Parabolic flute clears chips faster
Specifications
| Bit Diameter | 1/4 in. |
| Bit Material | High Speed Steel |
| Bit Type | Specialty |
| Length | 4.0 Inches |
| Package Contents | (1) 1/4" x 4" High Speed Steel Pilot Bit |
| Shank Diameter | 0.25 in |
| Flute Length | 2.000000 in |
| Minimum Chuck Size Required | 1/4 in |
| Single / Double Ended | Single |
| Drill Bit Shank Design | 3-Flat |
| Recommended Safety Equipment | Safety Glasses |
Specifications
| Length | 5.88 in |
| Weight | 3.386 oz |
| System of Measurement | Fractional |
| Size | 31/64 |
| Surface Finish | CN-TECH™ Cryogenic Nitride |
| Type Norseman | 190-CN |
| Material | High-Speed Steel |
| Flute Length | 4.38 in |
| Length Class | Jobber Length |
| Shank Type | 3-Flats |
| Bit Style | Spiral Flute |
| Point | 135° Split-Point |
| Flute Direction | Right Hand |
| Specification | NAS 907B |
| Packaging | Envelope |
| Number of Flutes | 2 |
| DFARS | Specialty Metals COTS- Exempt |
| USMCA Qualifying | Yes |
| HTS | 820750.5 |
The Milwaukee® 9/16 in. x 18 in. Ship auger bit drills through up to 2X the nails of competitive auger bits without needing resharpening. Drill into clean or nail-embedded wood with confidence when installing Romex wire, PEX water lines, rebar, bolts, and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. The through-center cutting design creates a more solid striking point against nails compared to the competitions' ahead-of-center and behind-center designs. The longer shaft length makes it easy to drill deeper or overhead without an extension.
Features
- Durable: Hardened, one-face 20 degree rake angle design enhances nail resistance, chip removal and fast, easy sharpening
- Fast chip removal: Nonstick, polished and coated flutes eliminate costly cleaning time
- Impact-rated shank: Strong enough to use with an impact wrench
- Versatile: One line of Milwaukee® auger bits covers all applications and tools
Specifications
| Bit Diameter | 9/16" |
| Bit Material | Alloy Steel |
| Case Included | No |
| Bit Type | Auger |
| Drilling Depth | 15.0 in |
| Length | 18.0 Inches |
| Self Feeding | Yes |
| Shank Diameter | 0.4375 in |
| Package Contents | (1) 9/16" x 18" Ship Auger Bit |
| Minimum Chuck Size Required | 3/8 in |
| Flute Length | 15.0 in |
| Single / Double Ended | Single |
The MILWAUKEE® 3-1/8" HOLE DOZER™ Bi-Metal Hole Saws new 3.5TPI tooth design offers users the longest life in metal applications. These HOLE DOZER™ Bi-Metal Hole Saws feature the industry's only Lifetime Tooth Break Warranty and can take on all general purpose applications, making them the most durable hole saws. Our ALL-ACCESS SLOTS solve the frustration of plug removal, making users more productive with less downtime between holes. The new slot design also gives users increased pilot visibility for accurate placement and faster chip ejection keeping their cut cool. HOLE DOZER™ Thermoset Coating allows for faster cutting and is optimized for cordless tools, delivering users 25% more holes per charge. Milwaukee HOLE DOZER™ Bi-Metal hole saws are proudly made in the USA.
Features
- Most Durable Hole Saw. Period.
- New 3.5 TPI Tooth Design
- All Access Slots enhance user productivity by providing best access and leverage to remove material slugs
- Increased Pilot Visibility for Accurate Hole Saw Placement
- Thermoset Coating reduces friction and drag, increasing overall speed and cordless efficiencies
- RIP GUARD™ Limited Lifetime Tooth Break Warranty
- Made in USA
- For use in general purpose applications such as thick/thin metals, aluminum, drywall, plastics, wood, wood with nails
- 1-5/8" Cutting Depth
- Plug Jack™, an all access slot design for fast plug removal
- Rip Guard™, the strongest tooth form in the industry
Specifications
| Hole Saw Diameter | 3-1/8 in in |
| Hole Saw Material | Bi-Metal |
| Bit Type | Hole Saw |
| Hole Saw Type | Multipurpose |
| Length | 3.0 Inches |
| Drilling Depth | 3.000000 in |
| Pilot Bit Diameter | 0.000000 in |
| Minimum Chuck Size Required | 3/8 in |
| Teeth per Inch | 3 |
| Case Included | No |
| Kit | No |
| Recommended Safety Equipment | Safety glasses |
| Package Contents | (1) 3-1/8" Hole Dozer Bi-Metal Hole Saw (49-56-0177) |
The MILWAUKEE® 2-1/2" HOLE DOZER™ Bi-Metal Hole Saws new 3.5TPI tooth design offers users the longest life in metal applications. These HOLE DOZER™ Bi-Metal Hole Saws feature the industry's only Lifetime Tooth Break Warranty and can take on all general purpose applications, making them the most durable hole saws. Our ALL-ACCESS SLOTS solve the frustration of plug removal, making users more productive with less downtime between holes. The new slot design also gives users increased pilot visibility for accurate placement and faster chip ejection keeping their cut cool. HOLE DOZER™ Thermoset Coating allows for faster cutting and is optimized for cordless tools, delivering users 25% more holes per charge. Milwaukee HOLE DOZER™ Bi-Metal hole saws are proudly made in the USA.
Features
- Most Durable Hole Saw. Period.
- New 3.5 TPI Tooth Design
- All Access Slots enhance user productivity by providing best access and leverage to remove material slugs
- Increased Pilot Visibility for Accurate Hole Saw Placement
- Thermoset Coating reduces friction and drag, increasing overall speed and cordless efficiencies
- RIP GUARD™ Limited Lifetime Tooth Break Warranty
- Made in USA
- For use in general purpose applications such as thick/thin metals, aluminum, drywall, plastics, wood, wood with nails
- 1-5/8" Cutting Depth
- Plug Jack™, an all access slot design for fast plug removal
- Rip Guard™, the strongest tooth form in the industry
Specifications
| Hole Saw Diameter | 2-1/2 in in |
| Hole Saw Material | Bi-Metal |
| Bit Type | Hole Saw |
| Hole Saw Type | Multipurpose |
| Length | 2.63 Inches |
| Drilling Depth | 2.0 in |
| Minimum Chuck Size Required | 3/8 in |
| Teeth per Inch | 6 |
| Case Included | No |
| Kit | No |
| Recommended Safety Equipment | Safety Glasses |
| Package Contents | (1) 2-1/2" Hole Dozer Bi-Metal Hole Saw (49-56-0147) |
Specifications
| System of Measurement | Fractional |
| Size | SP29PON |
| Surface Finish | Black And Gold |
| Type Norseman | 190-AG |
| Range | 1/16 - 1/2" by 64ths |
| Material | High-Speed Steel |
| Length Class | Jobber Length |
| Shank Type | Round |
| Style | Spiral Flute |
| Point | 135° Split-Point |
| Flute Direction | Right Hand |
| Specification | NAS 907B |
| Packaging | Plastic Index |
| Number of Flutes | 2 |
| DFARS | Specialty Metals COTS- Exempt |
| USMCA Qualifying | Yes |
| HTS | 820750.5 |
Features
- SPEED-TIP™ self-feed design effortlessly pulls the bit with minimal effort and faster holes
- Optimized curved paddle design quickly removes chip build-up for more holes per charge
- Impact Strong™ increases shank stability and durability
- Angled spur cutting edge scores wood for clean holes and reduced blowout
- Maximum performance in cordless and corded impact and drill drivers
Applications
- Drilling clean wood
Cuts
- Hardwoods
- Softwoods
- Plywood
Specifications
| Diameter | 1" |
| Length | 6" |
| Pack Quantity | 2 |
| Shank | 1/4" Hex |
