S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Drill Bits and Extension Sets
Applications
- Drills clean wood
- nail-embedded wood
- plastic
- aluminum
- metal
- cast iron and stainless steel
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool-free plug ejection for fast material removal
- 50x longer cutting life
Specifications
| Diameter | 2-11/16" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
Specifications
| Cutting depth (in) | 2 |
| Cutting depth (mm) | 50 |
| Bore dia. (in) | 1-1/2 |
| Bore dia. (mm) | 38.1 |
Cuts
- Hardwoods
- Softwoods
- Plywood
Features
- SPEED-TIP™ self-feed design effortlessly pulls the bit with minimal effort and faster holes
- Optimized curved paddle design quickly removes chip build-up for more holes per charge
- Impact Strong™ increases shank stability and durability
- Angled spur cutting edge scores wood for clean holes and reduced blowout
- Maximum performance in cordless and corded impact and drill drivers
Applications
- Drilling clean wood
Specifications
| Diameter | 3/8" |
| Length | 6" |
| Pack Quantity | 1 |
| Shank | 1/4" Hex |
Cuts
- Hardwoods
- Softwoods
- Plywood
Applications
- Drilling clean wood
Features
- SPEED-TIP™ self-feed design effortlessly pulls the bit with minimal effort and faster holes
- Optimized curved paddle design quickly removes chip build-up for more holes per charge
- Impact Strong™ increases shank stability and durability
- Angled spur cutting edge scores wood for clean holes and reduced blowout
- Maximum performance in cordless and corded impact and drill drivers
Specifications
| Diameter | 1/4" |
| Length | 6" |
| Pack Quantity | 1 |
| Shank | 1/4" Hex |
Diablo's high-performance carbide teeth hole cutters deliver 50-times longer cutting life, faster cutting performance and maximum productivity. An optimized carbide tooth geometry provides fast, burr-free holes that require virtually no rework. The depth stop collar maximizes productivity by providing a controlled drilling experience and limiting drilling depth. The combination of a tool-free plug ejection system and spring-loaded plug eject Cobalt pilot bit makes plug removal fast and efficient. Diablo's hole cutters are compatible with Diablo's SnapLock™ PLUS mandrel resulting in quick, easy and effortless cup changes.
Features
- Up to 50x longer cutter life in metal cutting versus standard bi-metal hole saws
- Depth Stop Collar for controlled and efficient hole drilling
- Plug Eject Cobalt Pilot Bit prevents overfeeding and allows for easy removal of plugs
- Tool-free plug ejection for fast material removal
- Compatible with Diablo's SnapLock™ PLUS mandrel for quick and easy cup changes with no down time
- Drills up to 1/4 in. metals, including sheet metals, electrical panels & steel studs
- For use with a drill press or hand-held drill
Applications
- Drills holes in metal
Cuts
- Metal
- Sheet
- Electrical Panels
- Steel Studs
Specifications
| Diameter | 7/8" |
| Length | 1/4" |
| Shank | Diablo Mandrel |
Features
- Assorted pack includes seven Hex drive bits: 9/64 in., 5/64 in., 3/32 in., 1/8 in., 5/32 in., 3/16 in., and 7/64 in.
- Extreme durability and impact resistance for up to 50X longer life versus standard bits
- Torque Resistant Design for less stress on the tip
- Optimized tip design reduces wear, minimizes breakage and prevents slippage
- Impact Strong™ increases shank stability and durability
- Rust protection coating for superior wear and corrosion resistance
- Laser engraved bit type and size for easy identification
- Optimized heat treatment process strengthens the bit for impact resistance and stability
- Maximum stability in in cordless and corded impact and drill drivers
Specifications
| Length | 1" |
| Pack Quantity | 7 |
| Screwdriver Head | HX Variety |
| Screwdriver Style | Hex |
Bosch Nail Strike Wood-Boring Bits are the first wood-boring bits to power through nail-embedded wood. The bit features reamer edges made of tough, reinforced steel that cut through up to 30 nails. Each bit has a fully threaded cone tip that pulls it through the wood, offering best-in-class speed through 2x4s. These bits are ideal for boring clean holes through wood fast to run conduit or pipe. The contoured paddle design also enhances chip removal, contributing to the fast performance. The hex shank with power groove reduces bit slippage in the drill and makes it suitable for use with a variety of drill types, including impact drills. These bits should not be used in a drill press and are not intended for counter boring or doweling.
Features
- Nail-killing wood-boring bit design adds extreme durability to Bosch speed for nail-embedded wood
- Reinforced reamer cutting edges make this bit the first wood-boring bit to drill through nails
- Optimized for wood and some wood with nails combines superior drill speed with engineered nail-cutting durability
- Fully threaded cone tip pulls the bit through wood quickly and effortlessly
- Contoured paddle design increases speed with faster chip removal
- Hex shank improves bit grip and allows use with a variety of drill types
- Premium bit material combined with innovation for great performance and life
Specifications
| Bit Diameter | 1/2" |
| Bit Material | High Carbon Steel |
| Case Included | No |
| Drilling Depth (in) | 5 |
| Flute Length (in) | 3 |
| Length (in) | 6 |
| Overall Length (in) | 6 |
| Quick Change Impact Driver Bit | No |
| Self Feeding | Yes |
| Set / Individual | Individual |
| Shank Diameter (in) | 0.25 |
| Single / Double Ended | Single |
Bosch Nail Strike Wood-Boring Bits are the first wood-boring bits to power through nail-embedded wood. The bit features reamer edges made of tough, reinforced steel that cut through up to 30 nails. Each bit has a fully threaded cone tip that pulls it through the wood, offering best-in-class speed through 2x4s. These bits are ideal for boring clean holes through wood fast to run conduit or pipe. The contoured paddle design also enhances chip removal, contributing to the fast performance. The hex shank with power groove reduces bit slippage in the drill and makes it suitable for use with a variety of drill types, including impact drills. These bits should not be used in a drill press and are not intended for counter boring or doweling.
Features
- Nail-killing wood-boring bit design adds extreme durability to Bosch speed for nail-embedded wood
- Reinforced reamer cutting edges make this bit the first wood-boring bit to drill through nails
- Optimized for wood and some wood with nails combines superior drill speed with engineered nail-cutting durability
- Fully threaded cone tip pulls the bit through wood quickly and effortlessly
- Contoured paddle design increases speed with faster chip removal
- Hex shank improves bit grip and allows use with a variety of drill types
- Premium bit material combined with innovation for great performance and life
Specifications
| Bit Diameter | 3/4" |
| Bit Material | High Carbon Steel |
| Case Included | No |
| Drilling Depth (in) | 5 |
| Flute Length (in) | 3 |
| Minimum Chuck Size Required | 1/4 in |
| Overall Length (in) | 6 |
| Quick Change Impact Driver Bit | No |
| Self Feeding | Yes |
| Set / Individual | Individual |
| Shank Diameter (in) | 0.25 |
| Single / Double Ended | Single |
Bosch Nail Strike Wood-Boring Bits are the first wood-boring bits to power through nail-embedded wood. The bit features reamer edges made of tough, reinforced steel that cut through up to 30 nails. Each bit has a fully threaded cone tip that pulls it through the wood, offering best-in-class speed through 2x4s. These bits are ideal for boring clean holes through wood fast to run conduit or pipe. The contoured paddle design also enhances chip removal, contributing to the fast performance. The hex shank with power groove reduces bit slippage in the drill and makes it suitable for use with a variety of drill types, including impact drills. These bits should not be used in a drill press and are not intended for counter boring or doweling.
Features
- Nail-killing wood-boring bit design adds extreme durability to Bosch speed for nail-embedded wood
- Reinforced reamer cutting edges make this bit the first wood-boring bit to drill through nails
- Optimized for wood and some wood with nails combines superior drill speed with engineered nail-cutting durability
- Fully threaded cone tip pulls the bit through wood quickly and effortlessly
- Contoured paddle design increases speed with faster chip removal
- Hex shank improves bit grip and allows use with a variety of drill types
- Premium bit material combined with innovation for great performance and life
Specifications
| Bit Diameter | 5/8" |
| Bit Material | High Carbon Steel |
| Case Included | No |
| Drilling Depth (in) | 5 |
| Flute Length (in) | 3 |
| Length (in) | 6 |
| Minimum Chuck Size Required | 1/4 in |
| Overall Length (in) | 6 |
| Quick Change Impact Driver Bit | No |
| Self Feeding | Yes |
| Set / Individual | Individual |
| Shank Diameter (in) | 0.25 |
| Single / Double Ended | Single |
Bosch Nail Strike Wood-Boring Bits are the first wood-boring bits to power through nail-embedded wood. The bit features reamer edges made of tough, reinforced steel that cut through up to 30 nails. Each bit has a fully threaded cone tip that pulls it through the wood, offering best-in-class speed through 2x4s. These bits are ideal for boring clean holes through wood fast to run conduit or pipe. The contoured paddle design also enhances chip removal, contributing to the fast performance. The hex shank with power groove reduces bit slippage in the drill and makes it suitable for use with a variety of drill types, including impact drills. These bits should not be used in a drill press and are not intended for counter boring or doweling.
Features
- Nail-killing wood-boring bit design adds extreme durability to Bosch speed for nail-embedded wood
- Reinforced reamer cutting edges make this bit the first wood-boring bit to drill through nails
- Optimized for wood and some wood with nails combines superior drill speed with engineered nail-cutting durability
- Fully threaded cone tip pulls the bit through wood quickly and effortlessly
- Contoured paddle design increases speed with faster chip removal
- Hex shank improves bit grip and allows use with a variety of drill types
- Premium bit material combined with innovation for great performance and life
Specifications
| Bit Diameter | 1" |
| Bit Material | High Carbon Steel |
| Case Included | No |
| Drilling Depth (in) | 5 |
| Flute Length (in) | 3 |
| Length (in) | 6 |
| Minimum Chuck Size Required | 1/4 in |
| Overall Length (in) | 6 |
| Quick Change Impact Driver Bit | No |
| Self Feeding | Yes |
| Set / Individual | Individual |
| Shank Diameter (in) | 0.25 |
Bosch Nail Strike Wood-Boring Bits are the first wood-boring bits to power through nail-embedded wood. The bit features reamer edges made of tough, reinforced steel that cut through up to 30 nails. Each bit has a fully threaded cone tip that pulls it through the wood, offering best-in-class speed through 2x4s. These bits are ideal for boring clean holes through wood fast to run conduit or pipe. The contoured paddle design also enhances chip removal, contributing to the fast performance. The hex shank with power groove reduces bit slippage in the drill and makes it suitable for use with a variety of drill types, including impact drills. These bits should not be used in a drill press and are not intended for counter boring or doweling.
Features
- Nail-killing wood-boring bit design ? adds extreme durability to Bosch speed for nail-embedded wood
- Reinforced reamer cutting edges ? make this bit the first wood-boring bit to drill through nails
- Optimized for wood and some wood with nails ? combines superior drill speed with engineered nail-cutting durability
- Fully threaded cone tip ? pulls the bit through wood quickly and effortlessly
- Contoured paddle design ? increases speed with faster chip removal
- Hex shank ? improves bit grip and allows use with a variety of drill types
- Premium bit material ? combined with innovation for great performance and life
Specifications
| Bit Diameter | 7/8" |
| Bit Material | High Carbon Steel |
| Case Included | No |
| Drilling Depth (in) | 5 |
| Flute Length (in) | 3 |
| Length (in) | 6 |
| Overall Length (in) | 6 |
| Self Feeding | Yes |
| Set / Individual | Individual |
| Shank Diameter (in) | 0.25 |
Cuts
- Hardwoods
- Softwoods
- Plywood
Features
- SPEED-TIP™ self-feed design effortlessly pulls the bit with minimal effort and faster holes
- Optimized curved paddle design quickly removes chip build-up for more holes per charge
- Impact Strong™ increases shank stability and durability
- Angled spur cutting edge scores wood for clean holes and reduced blowout
- Maximum performance in cordless and corded impact and drill drivers
Applications
- Drilling clean wood
Specifications
| Diameter | 1-1/2" |
| Length | 6" |
| Pack Quantity | 1 |
| Shank | 1/4" Hex |
Cuts
- Hardwoods
- Softwoods
- Plywood
Features
- SPEED-TIP™ self-feed design effortlessly pulls the bit with minimal effort and faster holes
- Optimized curved paddle design quickly removes chip build-up for more holes per charge
- Impact Strong™ increases shank stability and durability
- Angled spur cutting edge scores wood for clean holes and reduced blowout
- Maximum performance in cordless and corded impact and drill drivers
Applications
- Drilling clean wood
Specifications
| Diameter | 1-1/4" |
| Length | 6" |
| Pack Quantity | 1 |
| Shank | 1/4" Hex |
Features
- Double wing spurs: Allow for fast, clean hole cutting
- Fast chip removal: Nonstick, polished and coated flutes eliminate costly cleaning time
- Impact-rated shank: Strong enough to use with an impact wrench
- Versatile: One line of Milwaukee® auger bits covers all applications and tools
Specifications
| Bit Diameter | 7/8" |
| Bit Material | Alloy Steel |
| Case Included | No |
| Bit Type | Auger |
| Drilling Depth | 4.0 in |
| Length | 6.5 Inches |
| Self Feeding | Yes |
| Shank Diameter | 0.4375 in |
| Package Contents | (1) 7/8" x 6-1/2" Auger Bit |
| Minimum Chuck Size Required | 1/2 in |
| Flute Length | 4.0 in |
| Single / Double Ended | Single |
Features
- SPEED-TIP™ self-feed design effortlessly pulls the bit with minimal effort and faster holes
- Optimized curved paddle design quickly removes chip build-up for more holes per charge
- Impact Strong™ increases shank stability and durability
- Angled spur cutting edge scores wood for clean holes and reduced blowout
- Maximum performance in cordless and corded impact and drill drivers
Cuts
- Hardwoods
- Softwoods
- Plywood
Applications
- Drilling clean wood
Specifications
| Diameter | 1" |
| Length | 6" |
| Pack Quantity | 1 |
| Shank | 1/4" Hex |
Specifications
| Length | 6-7/8 in |
| Weight | 8.11301 oz |
| System of Measurement | Fractional |
| Size | 3/4 |
| Surface Finish | Black And Gold |
| Type Norseman | 51-AG |
| Material | High-Speed Steel |
| Number of Flutes | 5 |
| Reamer Minimum Starting Hole Size | .440 |
| Flute Length | 5 |
| Shank Type | 3-Flats |
| Shank Size | 1/2 |
| Point Diameter | 0.416 |
| Flute Style | Fast Spiral |
| Flute Direction | Right Hand |
| Packaging | Hanging Tube |
| DFARS | Specialty Metals COTS- Exempt |
| USMCA Qualifying | Yes |
| HTS | 820750.5 |
Milwaukee® SHOCKWAVE? Impact duty titanium drill bits with RED HELIX? are engineered for impacts and drills. Designed with a variable helix ? with an aggressive 35° helix angle which ends at 15°, the impact duty titanium drill bits with RED HELIX? provide Rapid Chip Removal? to limit heat buildup to Stay Sharper Longer?. The 135° split point tip delivers a precision start and prevents walking for fast, accurate holes. Titanium coating can be used in all drilling applications to give you up to 3X life vs. Black Oxide Drill Bits?.
Features
- Titanium coating for up to 3X life vs. black oxide
- SHOCKWAVE? Impact duty, engineered for drills and impacts
- RED HELIX? design for Rapid Chip Removal?
- CHIP BREAKER? decreased heat buildup
Specifications
| Pieces | 4.0 |
| Bit Type | Set |
| Bit Sizes | 1/8", 5/32", 3/16", 1/4" |
| Bit Material | Titanium Coated |
| Drill Bit Length Type | Jobber |
| Case Included | No |
| Quick Change Impact Driver Bit | Yes |
| Surface Coating | TiN (Titanium Nitride) |
| Drill Point Design | Split |
| Recommended Safety Equipment | Safety Glasses |
| Single / Double Ended | Single |
| Package Contents | (1) Each 1/8", 5/32", 3/16", 1/4" drill bits |
Specifications
| Length | 6-3/8 in |
| Weight | 5.57329 oz |
| System of Measurement | Fractional |
| Size | 5/8 |
| Surface Finish | Black And Gold |
| Type Norseman | 51-AG |
| Material | High-Speed Steel |
| Number of Flutes | 5 |
| Reamer Minimum Starting Hole Size | .340 |
| Flute Length | 4-1/2 |
| Shank Type | 3-Flats |
| Shank Size | 1/2 |
| Point Diameter | 0.323 |
| Flute Style | Fast Spiral |
| Flute Direction | Right Hand |
| Packaging | Hanging Tube |
| DFARS | Specialty Metals COTS- Exempt |
| USMCA Qualifying | Yes |
| HTS | 820750.5 |
Milwaukee® SHOCKWAVE™ Impact duty titanium drill bits with RED HELIX™ are engineered for impacts and drills. Designed with a Variable Helix™ with an aggressive 35° helix angle which ends at 15°, the impact duty titanium drill bits with RED HELIX™ provide Rapid Chip Removal™ to limit heat buildup to Stay Sharper Longer™. The 135° split point tip delivers a precision start and prevents walking for fast, accurate holes. Titanium coating can be used in all drilling applications to give you up to 3X life vs. Black Oxide Drill Bits™.
Features
- Titanium coating for up to 3X life vs. black oxide
- SHOCKWAVE™ Impact duty, engineered for drills and impacts
- RED HELIX™ design for Rapid Chip Removal™
- CHIP BREAKER™ decreased heat buildup
- 135 degree split point for precision start no walking
Specifications
| Bit Diameter | 3/8 In. |
| Bit Material | Titanium Coated |
| Case Included | No |
| Shank Style | Hex |
| Bit Type | Twist |
| Flute Length | 2.87 in |
| Length | 4.65 Inches |
| Package Contents | (1) 3/8" SHOCKWAVE Impact Duty RED HELIX Titanium Drill Bit |
| Recommended Safety Equipment | Safety Glasses |
| Shank Diameter | 0.25 in |
| Color Coded | No |
| Etched / Stamped Size Identification | Yes |
| Single / Double Ended | Single |
Milwaukee® SHOCKWAVE™ Impact duty titanium drill bits with RED HELIX™ are engineered for impacts and drills. Designed with a Variable Helix™ with an aggressive 35° helix angle which ends at 15°, the impact duty titanium drill bits with RED HELIX™ provide Rapid Chip Removal™ to limit heat buildup to Stay Sharper Longer™. The 135° split point tip delivers a precision start and prevents walking for fast, accurate holes. Titanium coating can be used in all drilling applications to give you up to 3X life vs. Black Oxide Drill Bits™.
Features
- Titanium coating for up to 3X life vs. black oxide
- SHOCKWAVE™ Impact duty, engineered for drills and impacts
- RED HELIX™ design for Rapid Chip Removal™
- CHIP BREAKER™ decreased heat buildup
- 135 degree split point for precision start no walking
Specifications
| Bit Diameter | 1/2 In. |
| Bit Material | Titanium Coated |
| Case Included | No |
| Shank Style | Hex |
| Bit Type | Twist |
| Flute Length | 3.32 in |
| Length | 5.12 Inches |
| Package Contents | (1) 1/2" SHOCKWAVE Impact Duty RED HELIX Titanium Drill Bit |
| Recommended Safety Equipment | Safety Glasses |
| Shank Diameter | 0.25 in |
| Color Coded | No |
| Etched / Stamped Size Identification | Yes |
| Single / Double Ended | Single |
Specifications
| Length | 6-3/8 in |
| Weight | 6.6315 oz |
| System of Measurement | Fractional |
| Size | 11/16 |
| Surface Finish | Black And Gold |
| Type Norseman | 51-AG |
| Material | High-Speed Steel |
| Number of Flutes | 5 |
| Reamer Minimum Starting Hole Size | .410 |
| Flute Length | 4-1/2 |
| Shank Type | 3-Flats |
| Shank Size | 1/2 |
| Point Diameter | 0.385 |
| Flute Style | Fast Spiral |
| Flute Direction | Right Hand |
| Packaging | Hanging Tube |
| DFARS | Specialty Metals COTS- Exempt |
| USMCA Qualifying | Yes |
| HTS | 820750.5 |
Milwaukee® SHOCKWAVE™ Impact duty titanium drill bits with RED HELIX™ are engineered for impacts and drills. Designed with a Variable Helix™ with an aggressive 35° helix angle which ends at 15°, the impact duty titanium drill bits with RED HELIX™ provide Rapid Chip Removal™ to limit heat buildup to Stay Sharper Longer™. The 135° split point tip delivers a precision start and prevents walking for fast, accurate holes. Titanium coating can be used in all drilling applications to give you up to 3X life vs. Black Oxide Drill Bits™.
Features
- Titanium coating for up to 3X life vs. black oxide
- SHOCKWAVE™ Impact duty, engineered for drills and impacts
- RED HELIX™ design for Rapid Chip Removal™
- CHIP BREAKER™ decreased heat buildup
- 135 degree split point for precision start no walking
Specifications
| Bit Diameter | 1/4 In. |
| Bit Material | Titanium Coated |
| Case Included | No |
| Shank Style | Hex |
| Bit Type | Twist |
| Flute Length | 2.460000 in |
| Length | 4.13 Inches |
| Package Contents | (1) 1/4" SHOCKWAVE Impact Duty RED HELIX Titanium Drill Bit |
| Recommended Safety Equipment | Safety Glasses |
| Shank Diameter | 0.250000 in |
| Color Coded | No |
| Etched / Stamped Size Identification | Yes |
| Single / Double Ended | Single |
Specifications
| Length | 6-7/8 in |
| Weight | 13.4041 oz |
| System of Measurement | Fractional |
| Size | 1-INCH |
| Surface Finish | Black And Gold |
| Type Norseman | 51-AG |
| Material | High-Speed Steel |
| Number of Flutes | 5 |
| Reamer Minimum Starting Hole Size | .630 |
| Flute Length | 5 |
| Shank Type | 3-Flats |
| Shank Size | 1/2 |
| Point Diameter | 0.604 |
| Flute Style | Fast Spiral |
| Flute Direction | Right Hand |
| Packaging | Hanging Tube |
| DFARS | Specialty Metals COTS- Exempt |
| USMCA Qualifying | Yes |
| HTS | 820750.5 |
The MILWAUKEE® SHOCKWAVE Impact Duty™ 15PC RED HELIX™ Titanium Drill Bit Set is engineered for extreme durability and long life. The QUAD EDGE™ tip delivers a precision start and features four cutting edges to create smaller chips for faster material removal and less heat leading to improved performance. Designed with a VARIABLE HELIX™ flute that begins with an aggressive 35° helical angle and ends at 15° for rapid chip removal. The bits also feature an internal thicker tapered web that greatly increases strength, reducing premature breakage. Ideal for various applications including but not limited to wood, plastics, and metals. MILWAUKEE® RED HELIX™ Titanium Drill Bits provide up to 5X life vs. black oxide drill bits. Set is organized in a customizable accessory case designed for use in PACKOUT™.
Features
- RED HELIX™ Technology combines QUAD EDGE™ tip, VARIABLE HELIX™ flute, and thicker tapered web
- QUAD EDGE Tip™ stays sharper longer
- VARIABLE HELIX™ flute designed for rapid chip removal
- Thicker tapered web design increases bit strength
- Titanium Coated for 5X Life vs. Black Oxide Drill Bits
- 1/4" hex shank for use with Impact Drivers and Drill Drivers
- Ideal for Metal, Wood, & Plastics
- Laser etched size for easy identification
- Customizable accessory case is designed for use in PACKOUT™
Specifications
| Pieces | 15 |
| Bit Type | Twist |
| Bit Sizes | 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" |
| Bit Material | Titanium Coated |
| Drill Bit Length Type | Jobber |
| Case Included | Yes |
| Recommended Safety Equipment | Safety Glasses, Work Gloves |
| Single / Double Ended | Single |
| Package Contents | (2) 1/16"; (1) 5/64"; (1) 3/32"; (1) 7/64"; (2) 1/8"; (1) 9/64"; (1) 5/32"; (2) 3/16"; (1) 7/32"; (1) 1/4"; (1) 5/16"; (1) 3/8" Drill Bit |
Specifications
| Length | 6-7/8 in |
| Weight | 10.5822 oz |
| System of Measurement | Fractional |
| Size | 7/8 |
| Surface Finish | Black And Gold |
| Type Norseman | 51-AG |
| Material | High-Speed Steel |
| Number of Flutes | 5 |
| Reamer Minimum Starting Hole Size | .530 |
| Flute Length | 5 |
| Shank Type | 3-Flats |
| Shank Size | 1/2 |
| Point Diameter | 0.51 |
| Flute Style | Fast Spiral |
| Flute Direction | Right Hand |
| Packaging | Hanging Tube |
| DFARS | Specialty Metals COTS- Exempt |
| USMCA Qualifying | Yes |
| HTS | 820750.5 |
Diablo's high-performance carbide teeth hole cutters deliver 50-times longer cutting life, faster cutting performance and maximum productivity. An optimized carbide tooth geometry provides fast, burr-free holes that require virtually no rework. The depth stop collar maximizes productivity by providing a controlled drilling experience and limiting drilling depth. The combination of a tool-free plug ejection system and spring-loaded plug eject Cobalt pilot bit makes plug removal fast and efficient. Diablo's hole cutters are compatible with Diablo's SnapLock™ PLUS mandrel resulting in quick, easy and effortless cup changes.
Applications
- Drills holes in metal
Cuts
- Metal
- Sheet
- Electrical Panels
- Steel Studs
Features
- Up to 50x longer cutter life in metal cutting versus standard bi-metal hole saws
- Depth Stop Collar for controlled and efficient hole drilling
- Plug Eject Cobalt Pilot Bit prevents overfeeding and allows for easy removal of plugs
- Tool-free plug ejection for fast material removal
- Compatible with Diablo's SnapLock™ PLUS mandrel for quick and easy cup changes with no down time
- Set includes three cups (7/8 in., 1-1/8 in., & 1-3/8 in.), one 7/16" SnapLock™ PLUS mandrel and two plug eject Cobalt pilot bits
- Drills up to 1/4 in. metals, including sheet metals, electrical panels & steel studs
- For use with a drill press or hand-held drill
Specifications
| Diameter | 7/8" to 1-3/8" |
| Length | 1/4" |
| Pack Quantity | 6 |
| Shank | Diablo Mandrel |
Specifications
| Length | 3.88 in |
| Weight | 0.35274 oz |
| System of Measurement | Wire Gauge |
| Size | #1 |
| Surface Finish | Bright |
| Type Norseman | 240-F |
| Material | High-Speed Steel |
| Flute Length | 2.63 in |
| Length Class | Jobber Length |
| Shank Type | Round |
| Bit Style | Fast Spiral |
| Point | 118° Split-Point |
| Flute Direction | Right Hand |
| Specification | NAS 907A |
| Packaging | Envelope |
| Number of Flutes | 2 |
| DFARS | Specialty Metals COTS- Exempt |
| USMCA Qualifying | Yes |
| HTS | 820750.5 |
The MILWAUKEE® SHOCKWAVE Impact Duty™ Magnetic Nut Drivers are engineered with the Most Durable Magnet to stand up to heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76™ steel to control hardness for extended bit life. The optimized SHOCK ZONE™ absorbs peak torque and prevents bit breakage. Our magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.
Features
- Impact Duty Magnet prevents magnet loosening over time
- Magnetic nut driver holds screws securely during application set-up
- Optimized SHOCK ZONE™ absorbs peak torque and prevents breakage
- Color-coded bands aid with selecting the right size nut driver
- CUSTOM ALLOY76™ Steel is engineered to extend bit life
- 6" Magnetic nut driver allows for extended reach and tight-access applications
- Chamfered edge for maximum screw-head engagement
- Improved hex geometry for best fit and reduced stripping
- Available in lengths: insert, 1-7/8", 2-9/16", 6"
- Designed for heavy-duty impact applications
- Designed for use with Impact Drivers and Drill Drivers
Specifications
| Bit Type | Driver |
| Package Contents | (1) SHOCKWAVE Impact Duty 5/16" x 6" Magnetic Nut Driver |
| Drive Design | Hex |
| Bit Material | Alloy Steel |
| Bit Sizes | 5/16 in |
| Pieces | 1 |
| Shank Diameter | 1/4 in hex |
| Set / Individual | Individual |
| Minimum Chuck Size Required | 1/4 in |
| Length | 6.0 Inches |
| Material | Alloy Steel |
| Screwdriver Bit Type | Nutsetter |
| Drive Type | Magnet Nut Driver |
The MILWAUKEE® SHOCKWAVE Impact Duty™ Magnetic Nut Drivers are engineered with the Most Durable Magnet to stand up to heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76™ steel to control hardness for extended bit life. The optimized SHOCK ZONE™ absorbs peak torque and prevents bit breakage. Milwaukee magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.
Features
- Impact Duty Magnet prevents magnet loosening over time
- Magnetic nut driver holds screws securely during application set-up
- Optimized SHOCK ZONE™ absorbs peak torque and prevents breakage
- Color-coded bands aid with selecting the right size nut driver
- CUSTOM ALLOY76™ Steel is engineered to extend bit life
- 6" Magnetic nut driver allows for extended reach and tight-access applications
- Chamfered edge for maximum screw-head engagement
- Improved hex geometry for best fit and reduced stripping
- Available in lengths: insert, 1-7/8", 2-9/16", 6"
- Designed for heavy-duty impact applications
- Designed for use with Impact Drivers and Drill Drivers
Specifications
| Bit Type | Driver |
| Package Contents | (1) SHOCKWAVE Impact Duty 1/4" x 6" Magnetic Nut Driver |
| Drive Design | Hex |
| Bit Material | Alloy Steel |
| Bit Sizes | 1/4 in |
| Pieces | 1 |
| Shank Diameter | 1/4 in hex |
| Set / Individual | Individual |
| Minimum Chuck Size Required | 1/4 in |
| Length | 6.0 Inches |
| Material | Alloy Steel |
| Screwdriver Bit Type | Nutsetter |
| Drive Type | Magnet Nut Driver |
The MILWAUKEE® SHOCKWAVE Impact Duty™ Magnetic Nut Drivers are engineered with the Most Durable Magnet to stand up to heavy duty applications throughout the life of the nut driver. The magnetic nut driver securely holds screws during application set-up providing unyielding bit engagement. Made from heat treated CUSTOM ALLOY76™ steel to control hardness for extended bit life. The optimized SHOCK ZONE™ absorbs peak torque and prevents bit breakage. Milwaukee magnetic nut drivers feature a chamfered edge for maximum screw-head engagement while the improved hex geometry allows for the best fit and reduced stripping during use. The nut drivers also feature color-coded bands that aid with selecting the right diameter. Designed for use with impact drivers and drill drivers.
Features
- Impact Duty Magnet prevents magnet loosening over time
- Magnetic nut driver holds screws securely during application set-up
- Optimized SHOCK ZONE™ absorbs peak torque and prevents breakage
- Color-coded bands aid with selecting the right size nut driver
- CUSTOM ALLOY76™ Steel is engineered to extend bit life
- 6" Magnetic nut driver allows for extended reach and tight-access applications
- Chamfered edge for maximum screw-head engagement
- Improved hex geometry for best fit and reduced stripping
- Available in lengths: insert, 1-7/8", 2-9/16", 6"
- Designed for heavy-duty impact applications
- Designed for use with Impact Drivers and Drill Drivers
Specifications
| Bit Type | Driver |
| Package Contents | (1) SHOCKWAVE Impact Duty 3/8" x 6" Magnetic Nut Driver |
| Drive Design | Hex |
| Bit Material | Alloy Steel |
| Bit Sizes | 3/8 in |
| Pieces | 1 |
| Shank Diameter | 1/4 in hex |
| Set / Individual | Individual |
| Minimum Chuck Size Required | 1/4 in |
| Length | 6.0 Inches |
| Material | Alloy Steel |
| Screwdriver Bit Type | Nutsetter |
| Drive Type | Magnet Nut Driver |
Specifications
| Cutting depth (in) | 1 |
| Cutting depth (mm) | 25 |
| Bore dia. (in) | 3/4 |
| Bore dia. (mm) | 19.05 |
Specifications
| Cutting depth (in) | 2 |
| Cutting depth (mm) | 50 |
| Bore dia. (in) | 3/4 |
| Bore dia. (mm) | 19.05 |
Cuts
- Hardwoods
- Softwoods
- Steel
- Plastics
- Siding
Applications
- Drills wood
- plastic
- aluminum
- metal
- stainless steel
Features
- 60 mm (2-3/8 in.) cutting depth for 40% deeper holes in 1 pass and increased productivity
- Fits with Snap-Lock Plus™ mandrel system allowing a quick and easy change with no down time
- Mandrel fits all Diablo hole saws, from 5/8 in. to 6 in. diameter
- Tool free plug ejection for fast material removal
- Variable Tooth Design provides faster cuts with less vibration
Specifications
| Diameter | 7/8" |
| Length | 2-3/8" |
| Shank | Diablo Mandrel |
Specifications
| Length | 5-7/8 in |
| Weight | 3.95068 oz |
| System of Measurement | Fractional |
| Size | 1/2 |
| Surface Finish | Black And Gold |
| Type Norseman | 51-AG |
| Material | High-Speed Steel |
| Number of Flutes | 5 |
| Reamer Minimum Starting Hole Size | .310 |
| Flute Length | 3-15/16 |
| Shank Type | 3-Flats |
| Shank Size | 1/2 |
| Point Diameter | 0.291 |
| Flute Style | Fast Spiral |
| Flute Direction | Right Hand |
| Packaging | Hanging Tube |
| DFARS | Specialty Metals COTS- Exempt |
| USMCA Qualifying | Yes |
| HTS | 820750.5 |
