S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Concrete Construction
Features
- Internally threaded anchor for easy bolt removability and service work
- Flanged (lipped) version installs flush for easy inspection and standard embedment
- Smooth wall drop-in can be installed flush mounted or below the base material surface
- Optionally available with a knurled body
Specifications
| Weight | 0.022 lbs |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
| Weight | 1.41 lbs |
| Product Diameter Us | 0.875000 IN |
| Power Source | NON-ENERGY USING |
| Connection Design | Concrete & Masonry |
| Design Type | Hex |
| Fastener Length | 8.0 |
| Fastener Plating | Zinc |
| Head Style | Hex Nut |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Thread Type | Standard |
| Product Finish | Silver |
| Product Primary Material | Carbon Steel |
Drive pins with an 8mm diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145" diameter shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. For single fasteners, a plastic washer is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide centered guidance during the driving operation.
Specifications
| Weight | 0.006 lbs |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Features
- Metal design for strength and durability
- Retractable blade for easy storage
Specifications
| Length | 10.8 in |
| Width | 1 in |
| Height | 1 in |
| Weight | 0.04 lbs |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
| Weight | 0.62 lbs |
| Product Diameter Us | 0.750000 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete & Masonry |
| Design Type | Hex |
| Fastener Length | 4.25 |
| Fastener Plating | Zinc |
| Head Style | Hex Nut |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Thread Type | Standard |
| Product Finish | Silver |
| Product Primary Material | Carbon Steel |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
| Weight | 0.66 lbs |
| Product Diameter Us | 0.750000 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete & Masonry |
| Design Type | Hex |
| Fastener Length | 4.75 |
| Fastener Plating | Zinc |
| Head Style | Hex Nut |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Thread Type | Standard |
| Product Finish | Silver |
| Product Primary Material | Carbon Steel |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
| Weight | 0.093 lbs |
| Product Diameter Us | 0.375000 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Disclaimer | NULL |
| Claims Needed | No |
| Connection Design | Concrete & Masonry |
| Design Type | Hex |
| Fastener Length | 2.75 |
| Fastener Plating | Zinc |
| Head Style | Hex Nut |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Thread Type | Standard |
| Product Finish | Silver |
| Product Primary Material | Carbon Steel |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to a free edge than traditional expansion anchors
Specifications
| Length | 5 in |
| Width | 8.6 in |
| Height | 3.6 in |
| Weight | 0.718 lbs |
| Product Diameter Us | 3/4 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Prop 65 Generic Warning | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 5 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Zinc |
| Product Primary Material | Carbon Steel |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to a free edge than traditional expansion anchors
Specifications
| Weight | 0.607 lbs |
| Product Diameter Us | 3/4 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 4 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Zinc |
| Product Primary Material | Carbon Steel |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Specifications
| Weight | 0.498 lbs |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
Specifications
| Length | 6 in |
| Width | 1 in |
| Height | 1 in |
| Weight | 0.36 lbs |
| Product Diameter Us | 1/2 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Charger Included | No |
| Disclaimer | NULL |
| Prop 65 Generic Warning | No |
| Claims Needed | No |
| Connection Design | Wood to Wood |
| Fastener Length | 6 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Silver |
| Product Primary Material | bright zinc-plated and mechanically galvanized |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
Specifications
| Length | 5.5 in |
| Width | 1 in |
| Height | 1 in |
| Weight | 0.3 lbs |
| Product Diameter Us | 1/2 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Disclaimer | NULL |
| Claims Needed | No |
| Connection Design | Wood to Wood |
| Fastener Length | 5 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Silver |
| Product Primary Material | bright zinc-plated and mechanically galvanized |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
| Weight | 0.258 lbs |
| Product Diameter Us | 0.500000 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Disclaimer | NULL |
| Prop 65 Generic Warning | Yes |
| Claims Needed | No |
| Connection Design | Concrete & Masonry |
| Design Type | Hex |
| Fastener Length | 4.5 |
| Fastener Plating | Zinc |
| Head Style | Hex Nut |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Thread Type | Standard |
| Product Finish | Silver |
| Product Primary Material | Carbon Steel |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
| Weight | 0.37 lbs |
| Product Diameter Us | 0.625000 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete & Masonry |
| Design Type | Hex |
| Fastener Length | 3.5 |
| Fastener Plating | Zinc |
| Head Style | Hex Nut |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Thread Type | Standard |
| Product Finish | Silver |
| Product Primary Material | Carbon Steel |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to a free edge than traditional expansion anchors
Specifications
| Length | 4.2 in |
| Width | 10.8 in |
| Height | 3.5 in |
| Weight | 0.404 lbs |
| Product Diameter Us | 5/8 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Prop 65 Generic Warning | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 4 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Zinc |
| Product Primary Material | Carbon Steel |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to a free edge than traditional expansion anchors
Specifications
| Weight | 0.33 lbs |
| Product Diameter Us | 5/8 IN |
| Power Source | NON-ENERGY USING |
| Prop 65 Generic Warning | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 3 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Silver |
| Product Primary Material | bright zinc-plated and mechanically galvanized |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
Specifications
| Weight | 0.452 lbs |
| Product Diameter Us | 1/2 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Wood to Wood |
| Fastener Length | 8 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Silver |
| Product Primary Material | bright zinc-plated and mechanically galvanized |
Specifications
| Length | 14.54 in |
| Width | 8.1 in |
| Height | 2.5 in |
| Weight | 2.6 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Bare Tool | Yes |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
Specifications
| Length | 4 in |
| Weight | 0.148 lbs |
| Product Diameter Us | 3/8 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Charger Included | No |
| Disclaimer | NULL |
| Prop 65 Generic Warning | No |
| Claims Needed | No |
| Connection Design | Wood to Wood |
| Fastener Length | 4 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Silver |
| Product Primary Material | bright zinc-plated and mechanically galvanized |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ finish is available in bright zinc-plated and mechanically galvanized. Suitable base materials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
Specifications
| Weight | 0.117 lbs |
| Product Diameter Us | .375 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Disclaimer | NULL |
| Prop 65 Generic Warning | Yes |
| Claims Needed | No |
| Connection Design | Wood to Wood |
| Fastener Length | 3 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Silver |
| Product Primary Material | bright zinc-plated and mechanically galvanized |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to a free edge than traditional expansion anchors
Specifications
| Length | 4.6 in |
| Width | 6.4 in |
| Height | 2.9 in |
| Weight | 0.101 lbs |
| Product Diameter Us | 3/8 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Disclaimer | NULL |
| Claims Needed | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 2.5 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Zinc |
| Product Primary Material | Carbon Steel |
Features
- Variety of head styles, lengths and sizes
- All steel component design
- Preassembled anchor for immediate installation
- Sleeve design keeps anchor centered in hole
Specifications
| Weight | 0.155 lbs |
| Product Diameter Us | 0.5 IN |
| Connection Design | Concrete Only |
| Fastener Length | 3 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
| Weight | 0.824 lbs |
| Product Diameter Us | 0.625000 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete & Masonry |
| Design Type | Hex |
| Fastener Length | 10.0 |
| Fastener Plating | Zinc |
| Head Style | Hex Nut |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Thread Type | Standard |
| Product Finish | Silver |
| Product Primary Material | Carbon Steel |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
| Weight | 2.63 lbs |
| Product Diameter Us | 1.000000 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete & Masonry |
| Design Type | Hex |
| Fastener Length | 12.0 |
| Fastener Plating | Zinc |
| Head Style | Hex Nut |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Thread Type | Standard |
| Product Finish | Silver |
| Product Primary Material | Carbon Steel |
