S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Hardware
Specifications
| Class | MR |
| Sub Class | MP |
| Size | 7mm |
| Hardness | Class 8 |
| Material | Steel |
| Finish | Zinc |
Specifications
| Class | MR |
| Sub Class | MP |
| Size | 6mm |
| Hardness | Class 8 |
| Material | Steel |
| Finish | Zinc |
Features
- UL/CUL approved for fastening single non-metallic cable: 14/2, 14/3, 12/2, 12/3, 10/2, 10/3 and double stacked non-metallic cable: 14/2, 14/3, 12/2, 12/3, 10/2
- Suitable for use on low voltage cable such as CAT3, CAT5, CAT6, and Coax
- Only compatible with Milwaukee M12 Cable Stapler (2448)
- Plastic Insulated to Protect Cable Sheathing
- Collated in Strips of 20 Staples
- 600 Staples per Box
Specifications
| Callout Size | 1 in |
| Fastener Category | Nails |
| Fastener Color / Finish | Red, Gray |
| Length | 3.0 Inches |
| Material | Galvanized steel |
| Nail Name | Insulated Staples |
| Package Weight | 1.52 lbs |
| Width | 0.75 Inches |
| Package Quantity | 600 |
| Height | 1.0 Inches |
| Staple Type | Insulated |
| Compatible Staplers | Milwaukee M12 Cable Stapler (2448-20) |
Specifications
| Height | 2.5 IN |
| Length | 2.81 IN |
| Width | 5.56 IN |
| Weight | 2.13 LB |
| Type | FASTENERS: FRAMING NAILS |
| Warranty | NLW |
The MILWAUKEE® M18 FUEL Utility Fencing Stapler Kit delivers unmatched performance in a completely battery-powered solution. By leveraging our Nitrogen Air Spring technology, POWERSTATE™ Brushless motor and REDLINK™ Intelligence, this stapler delivers the power to seat staples into the toughest Utility Pole and Fence Post Materials. The Milwaukee M18 FUEL Utility Fencing Stapler provides users a 6X Increase in productivity and a reduction in Peak Muscle Effort compared to Manual Staple Installation. Designed for compatibility with MILWAUKEE® 9 Gauge Galvanized Staples (sold separately) available in three sizes: 1 ½", 1 ¾", 2". When paired with the M18 REDLITHIUM™ CP3.0 Battery pack, this stapler gives users the ability to sink up to 600 staples per charge no gas cartridge required. The MILWAUKEE® M18 FUEL Utility Fencing Stapler joins the M18 System of over 200 solutions and is compatible with all M18™ REDLITHIUM batteries.
Features
- Only compatible with Milwaukee 9GA Galvanized Staples (MPU112-960, MPU134-960, MPU2-960)
- Fires up to 600 Staples on a M18 HO CP 3.0AH Battery
- No Gas Cartridge Required - Completely Battery Operated
- Fires 2 Staples Per Second
- Tool Free Depth Adjustment
- Tool Free Jam Clearing Latch
- Integrated lanyard loop ensures easy transfer and storage
- Enlarged touchpoints designed specifically for use with insulated & leather gloves
- Manual Trigger Lock Switch
- Reversible Belt Hook
- LED Work Light
- Dry Fire Lockout
- Part of the M18™ system, featuring over 200+ solutions
- POWERSTATE Brushless Motor delivers longer life and higher performance
- REDLITHIUM battery technology: superior pack construction, electronics and performance deliver more work per charge and more work over pack life than any battery on the market
Specifications
| Powered Tool Power Source | Electric - Cordless |
| Cordless / Corded | Cordless |
| Staple Use | Fencing |
| Voltage (V) | 18.0 |
| Amperage (A) | 3.0 |
| Fastener Gauge Range | 9 ga |
| Fastener Length Range | 1.5 to 2 in |
| Fastener Format | Strip |
| Fasteners Used | Milwaukee 9ga Galvanized Staples |
| Color / Finish | Red, Black |
| Staple Type | 9ga Galvanized |
| Housing Material | Glass Filled Nylon |
| Length | 15.0 Inches |
| Height | 12.8 Inches |
| Net Tool Weight | 11.2 lbs |
| Case Included | Yes |
| CSA Certified | No |
| ETL Listed | No |
| UL Listed | Yes |
| Package Contents | (1) M18 FUEL Utility Fencing Stapler; (2) M18 High Output 3.0AH Battery; (1) M18 & M12 Multi-Voltage Charger; (1) Contractor Bag |
Features
- New engine design and feedback system improve performance and durability
Specifications
| Length | 9.7 in |
| Width | 5.3 in |
| Height | 4.4 in |
| Weight | 20.84 lbs |
| Claims Needed | No |
| Angle | 28 Deg |
| Coating | Bright Finish |
| Fastener Length | 3.25 |
| Head Style | Round |
| Head Width | 0.12 In |
| Nail Format | Wire Collated |
| Nail Gauge | NA / Other |
| Nail Length | 3.25 In |
| Nail Type | Framing |
| Recommended Safety Equipment | Safety Glasses |
| Product Finish | Brite |
| Product Primary Material | Steel |
Bostitch manufactures over 2000 types of fasteners. Each fastener is engineered for optimal performance in Bostitch tools, and for exceeding the performance expectations of our customers. Our goal is to continually increase efficiency, productivity and quality, and to ensure building code compliance through the ICC ESR 2020, ICC ESR 1539 and ICC ER 5426 reports. Our team of engineers leads the industry in innovation and design. Utilizing our advanced laboratory, our team of engineers conducts environmental testing to study the effects of storm forces and other weather conditions, withdrawal testing to evaluate new coatings, penetration testing to evaluate drive characteristics, and development testing to optimize withdrawal, shear and pull-through performance.
Features
- New engine design and feedback system improve performance and durability
Specifications
| Length | 5 in |
| Width | 5.4 in |
| Height | 2.1 in |
| Weight | 4.87 lbs |
| Crown Size | 5/16 In |
| Gauge | 18 |
| Staple Leg Length | 1 |
Features
- Consistent drivability for applications
Specifications
| Length | 4.64 in |
| Width | 3.11 in |
| Height | 1.7 in |
| Weight | 2.75 lbs |
| Power Source | NON-ENERGY USING |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Prop 65 Generic Warning | No |
| Warranty | 90DLW |
| Angle | 20 Deg |
| Coating | Hot Galvanized |
| Collation | Adhesive |
| Fastener Length | 1.25 |
| Gauge | 16 |
| Head Style | Angled |
| Head Width | 0.113 In |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Nail Gauge | 16 |
| Nail Length | 1.25 In |
| Nail Type | Finishing |
| Recommended Safety Equipment | Safety glasses |
| Product Finish | Galvanized |
| Product Primary Material | Steel |
Specifications
| Weight | 38 Lbs. |
Specifications
| Class | MR |
| Sub Class | MP |
| Size | 14mm-2.0x 35mm |
| Drive Type | #18 Wrench |
| Thread Type | Coarse |
| Thread Length | Full |
| Hardness | Class 10.9 |
| Material | Steel |
| Finish | Black Phosphate |
Features
- Durable; reliable
Specifications
| Length | 4.69 in |
| Width | 3.11 in |
| Height | 1.57 in |
| Weight | 3.1 lbs |
| Power Source | NON-ENERGY USING |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Prop 65 Generic Warning | No |
| Warranty | 90DLW |
| Certifications Or Listings | ANSI Safety Listing |
| Angle | 20 Deg |
| Coating | Hot Galvanized |
| Collation | Plastic |
| Fastener Length | 1.50 |
| Gauge | 16 |
| Head Style | T-shaped |
| Head Width | 0.113 In |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Nail Gauge | 16 |
| Nail Length | 1.5 In |
| Nail Type | Finishing |
| Recommended Safety Equipment | Safety Glasses |
| Product Finish | Galvanized/Silver |
| Product Primary Material | Steel |
Features
- Durable; Reliable
Specifications
| Length | 5 in |
| Width | 3.11 in |
| Height | 2.7 in |
| Weight | 5.25 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Prop 65 Generic Warning | No |
| Warranty | MWC |
| Certifications Or Listings | ANSI Safety Listing |
| Claims Needed | No |
| Angle | 20 Deg |
| Coating | Hot Galvanized |
| Collation | Adhesive |
| Fastener Length | 2.50 |
| Gauge | 16 |
| Head Style | Angled |
| Head Width | 0.113 In |
| Individual Vs. Set (Syndigo) | SET |
| Nail Gauge | 16 |
| Nail Length | 2.5 In |
| Nail Type | Finishing |
| Recommended Safety Equipment | Safety glasses |
| Product Finish | Galvanized |
| Product Primary Material | Steel |
Features
- Cold-worked carbon steel and galvanized in hot-dip process
Specifications
| Length | 4.925 in |
| Width | 3.11 in |
| Height | 2.2 in |
| Weight | 4.25 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | No |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Prop 65 Generic Warning | No |
| Warranty | MWC |
| Angle | 30 Deg |
| Coating | Hot Galvanized |
| Collation | Adhesive |
| Fastener Length | 2.00 |
| Gauge | 16 |
| Head Style | Angled |
| Head Width | 0.113 In |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Nail Gauge | 16 |
| Nail Length | 1.25 In |
| Nail Type | Finishing |
| Recommended Safety Equipment | Safety glasses |
| Product Finish | Metallic |
| Product Primary Material | Steel |
