S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Hardware
Bostitch manufactures over 2000 types of fasteners. Each fastener is engineered for optimal performance in Bostitch tools, and for exceeding the performance expectations of our customers. Our goal is to continually increase efficiency, productivity and quality, and to ensure building code compliance through the ICC ESR 2020, ICC ESR 1539 and ICC ER 5426 reports. Our team of engineers leads the industry in innovation and design. Utilizing our advanced laboratory, our team of engineers conducts environmental testing to study the effects of storm forces and other weather conditions, withdrawal testing to evaluate new coatings, penetration testing to evaluate drive characteristics, and development testing to optimize withdrawal, shear and pull-through performance.
Features
- Lightweight at just 7.3 lbs
Specifications
| Length | 6.6 in |
| Width | 2.2 in |
| Height | 1.4 in |
| Weight | 3.774 lbs |
| Net Lit-Ion Y/N | No |
| Coating | Bright Finish |
| Fastener Length | 2.00 |
| Gauge | 16 |
| Nail Gauge | 16 |
| Nail Length | 2 In |
| Product Primary Material | Steel |
Features
- Thickcoat galvanized finish delivers consistent, corrosion-resistant performance in pressure treated lumber and exterior applications
- Blunt diamond point reduces wood splitting in hardwood applications
- Quantity: 3,600 wire weld coil siding nails
- Fits the following Bostitch tools: N63CP, N64C, N66C, N66BC
- It has a ring shank for better holding power
Specifications
| Length | 13.875 in |
| Width | 9.688 in |
| Height | 5.2 in |
| Weight | 15.95 lbs |
| Claims Needed | No |
| Fastener Length | 2.00 |
| Head Style | Round |
| Head Width | 0.090 In |
| Nail Length | 2 In |
| Product Primary Material | Metal |
Features
- Engineered To Work Seamlessly With DEWALT 18 Gauge 1/4" Narrow Crown Staplers
- Ideal for Cabinetry, Furniture, Floor Underlayment, and Paneling
- Staple Coating Suitable For Interior Use Only
- Chisel Point To Reduce Splitting of Material
- Fits Most 18 Gauge 1/4 in. Narrow Crown Staplers
Specifications
| Length | 5.625 in |
| Width | 3.6 in |
| Height | 1.1 in |
| Weight | 2.5 lbs |
| Power Source | NON-ENERGY USING |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Prop 65 Generic Warning | No |
| Warranty | MWC |
| Certifications Or Listings | ANSI Safety Listing |
| Collation | Glue |
| Crown Size | 0.25 in In |
| Fastener Length | 1 |
| Gauge | 18 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Nail Gauge | 18 |
| Staple Leg Length | 1 |
| Staple Type | 1/4" Crown |
| Use Location | Finishing |
| Use With | Construction |
| Product Finish | Coated |
| Product Primary Material | Stainless Steel |
Features
- This product is easy to use.
- This product is highly durable
- This product is manufactured in China.
Specifications
| Length | 10.4 in |
| Width | 8.7 in |
| Height | 7.5 in |
| Weight | 44.77 lbs |
| Power Source | NON-ENERGY USING |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
The MILWAUKEE® M18 FUEL Utility Fencing Stapler Kit delivers unmatched performance in a completely battery-powered solution. By leveraging our Nitrogen Air Spring technology, POWERSTATE™ Brushless motor and REDLINK™ Intelligence, this stapler delivers the power to seat staples into the toughest Utility Pole and Fence Post Materials. The Milwaukee M18 FUEL Utility Fencing Stapler provides users a 6X Increase in productivity and a reduction in Peak Muscle Effort compared to Manual Staple Installation. Designed for compatibility with MILWAUKEE® 9 Gauge Galvanized Staples (sold separately) available in three sizes: 1 ½", 1 ¾", 2". When paired with the M18 REDLITHIUM™ CP3.0 Battery pack, this stapler gives users the ability to sink up to 600 staples per charge no gas cartridge required. The MILWAUKEE® M18 FUEL Utility Fencing Stapler joins the M18 System of over 200 solutions and is compatible with all M18™ REDLITHIUM batteries.
Features
- Only compatible with Milwaukee 9GA Galvanized Staples (MPU112-960, MPU134-960, MPU2-960)
- Fires up to 600 Staples on a M18 HO CP 3.0AH Battery
- No Gas Cartridge Required - Completely Battery Operated
- Fires 2 Staples Per Second
- Tool Free Depth Adjustment
- Tool Free Jam Clearing Latch
- Integrated lanyard loop ensures easy transfer and storage
- Enlarged touchpoints designed specifically for use with insulated & leather gloves
- Manual Trigger Lock Switch
- Reversible Belt Hook
- LED Work Light
- Dry Fire Lockout
- Part of the M18™ system, featuring over 200+ solutions
- POWERSTATE Brushless Motor delivers longer life and higher performance
- REDLITHIUM battery technology: superior pack construction, electronics and performance deliver more work per charge and more work over pack life than any battery on the market
Specifications
| Powered Tool Power Source | Electric - Cordless |
| Cordless / Corded | Cordless |
| Staple Use | Fencing |
| Voltage (V) | 18.0 |
| Amperage (A) | 3.0 |
| Fastener Gauge Range | 9 ga |
| Fastener Length Range | 1.5 to 2 in |
| Fastener Format | Strip |
| Fasteners Used | Milwaukee 9ga Galvanized Staples |
| Color / Finish | Red, Black |
| Staple Type | 9ga Galvanized |
| Housing Material | Glass Filled Nylon |
| Length | 15.0 Inches |
| Height | 12.8 Inches |
| Net Tool Weight | 11.2 lbs |
| Case Included | Yes |
| CSA Certified | No |
| ETL Listed | No |
| UL Listed | Yes |
| Package Contents | (1) M18 FUEL Utility Fencing Stapler; (2) M18 High Output 3.0AH Battery; (1) M18 & M12 Multi-Voltage Charger; (1) Contractor Bag |
Features
- New engine design and feedback system improve performance and durability
Specifications
| Length | 9.7 in |
| Width | 5.3 in |
| Height | 4.4 in |
| Weight | 20.84 lbs |
| Claims Needed | No |
| Angle | 28 Deg |
| Coating | Bright Finish |
| Fastener Length | 3.25 |
| Head Style | Round |
| Head Width | 0.12 In |
| Nail Format | Wire Collated |
| Nail Gauge | NA / Other |
| Nail Length | 3.25 In |
| Nail Type | Framing |
| Recommended Safety Equipment | Safety Glasses |
| Product Finish | Brite |
| Product Primary Material | Steel |
Bostitch manufactures over 2000 types of fasteners. Each fastener is engineered for optimal performance in Bostitch tools, and for exceeding the performance expectations of our customers. Our goal is to continually increase efficiency, productivity and quality, and to ensure building code compliance through the ICC ESR 2020, ICC ESR 1539 and ICC ER 5426 reports. Our team of engineers leads the industry in innovation and design. Utilizing our advanced laboratory, our team of engineers conducts environmental testing to study the effects of storm forces and other weather conditions, withdrawal testing to evaluate new coatings, penetration testing to evaluate drive characteristics, and development testing to optimize withdrawal, shear and pull-through performance.
Features
- New engine design and feedback system improve performance and durability
Specifications
| Length | 5 in |
| Width | 5.4 in |
| Height | 2.1 in |
| Weight | 4.87 lbs |
| Crown Size | 5/16 In |
| Gauge | 18 |
| Staple Leg Length | 1 |
Features
- Consistent drivability for applications
Specifications
| Length | 4.64 in |
| Width | 3.11 in |
| Height | 1.7 in |
| Weight | 2.75 lbs |
| Power Source | NON-ENERGY USING |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Prop 65 Generic Warning | No |
| Warranty | 90DLW |
| Angle | 20 Deg |
| Coating | Hot Galvanized |
| Collation | Adhesive |
| Fastener Length | 1.25 |
| Gauge | 16 |
| Head Style | Angled |
| Head Width | 0.113 In |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Nail Gauge | 16 |
| Nail Length | 1.25 In |
| Nail Type | Finishing |
| Recommended Safety Equipment | Safety glasses |
| Product Finish | Galvanized |
| Product Primary Material | Steel |
Specifications
| Weight | 38 Lbs. |
Specifications
| Class | MR |
| Sub Class | MP |
| Size | 14mm-2.0x 35mm |
| Drive Type | #18 Wrench |
| Thread Type | Coarse |
| Thread Length | Full |
| Hardness | Class 10.9 |
| Material | Steel |
| Finish | Black Phosphate |
Features
- Durable; reliable
Specifications
| Length | 4.69 in |
| Width | 3.11 in |
| Height | 1.57 in |
| Weight | 3.1 lbs |
| Power Source | NON-ENERGY USING |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Prop 65 Generic Warning | No |
| Warranty | 90DLW |
| Certifications Or Listings | ANSI Safety Listing |
| Angle | 20 Deg |
| Coating | Hot Galvanized |
| Collation | Plastic |
| Fastener Length | 1.50 |
| Gauge | 16 |
| Head Style | T-shaped |
| Head Width | 0.113 In |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Nail Gauge | 16 |
| Nail Length | 1.5 In |
| Nail Type | Finishing |
| Recommended Safety Equipment | Safety Glasses |
| Product Finish | Galvanized/Silver |
| Product Primary Material | Steel |
Features
- Durable; Reliable
Specifications
| Length | 5 in |
| Width | 3.11 in |
| Height | 2.7 in |
| Weight | 5.25 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Prop 65 Generic Warning | No |
| Warranty | MWC |
| Certifications Or Listings | ANSI Safety Listing |
| Claims Needed | No |
| Angle | 20 Deg |
| Coating | Hot Galvanized |
| Collation | Adhesive |
| Fastener Length | 2.50 |
| Gauge | 16 |
| Head Style | Angled |
| Head Width | 0.113 In |
| Individual Vs. Set (Syndigo) | SET |
| Nail Gauge | 16 |
| Nail Length | 2.5 In |
| Nail Type | Finishing |
| Recommended Safety Equipment | Safety glasses |
| Product Finish | Galvanized |
| Product Primary Material | Steel |
Features
- Cold-worked carbon steel and galvanized in hot-dip process
Specifications
| Length | 4.925 in |
| Width | 3.11 in |
| Height | 2.2 in |
| Weight | 4.25 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Net Lit-Ion Y/N | No |
| Battery Required | Yes |
| Number Of Batteries Required | 1 |
| Prop 65 Generic Warning | No |
| Warranty | MWC |
| Angle | 30 Deg |
| Coating | Hot Galvanized |
| Collation | Adhesive |
| Fastener Length | 2.00 |
| Gauge | 16 |
| Head Style | Angled |
| Head Width | 0.113 In |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Nail Gauge | 16 |
| Nail Length | 1.25 In |
| Nail Type | Finishing |
| Recommended Safety Equipment | Safety glasses |
| Product Finish | Metallic |
| Product Primary Material | Steel |
Features
- The AUTOMATIC FEED SPOOL - AFS automatically feeds trimmer line when needed with no bumping required
Specifications
| Length | 3 in |
| Width | 2 in |
| Height | 2 in |
| Weight | 0.34 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Claims Needed | No |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
