S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Hand Tools
Features
- Heavy-duty square shank for wrench-assisted turning
- Bolster reinforces shank for hard use
- Designed for the most demanding uses
- Cushion-Grip™ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
- Made in USA
- Internal flanges inside handle provide solid, twist-resistant blade anchor
- Special heat-treated shafts
- Precision-machined tip for exact fit
- Meets or exceeds applicable ASME / ANSI specifications
- Tip-Ident® quickly identifies the screwdriver type and tip orientation
Specifications
| Shank Type | Square |
| Overall Length | 13.438" (34.1 cm) |
| Shank Length | 8" (20.3 cm) |
| Insulated | No |
| Magnetic | No |
| Handle Material | Heavy-Duty Rubber |
| Tip Type | Keystone |
| Handle Color | Black |
| Material | Steel |
| Tip Size | 3/8" (9.5 mm) |
| Height | 1.1250 in |
| Width | 2.3670 in |
| Depth | 13.4380 in |
| Weight | 0.6500 lbs |
Your Price:
18.39
Each
Features
- Retaining rings are used to help secure sockets onto drive tools
- They are not intended to bear any load
- The rotational forces are between the drive tool and the socket
- The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced
- Drive tool and socket should line up when in use and should not pinch the crush gauge
- Cracked sockets and/or worn drive tools cause each other to turn excessively in relation to each other. This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced
- One-piece construction, no loose parts. Pin is made of resin which allows the material to compress without breaking
- Part numbers are embossed on the rings near the point at which the pin and ring meet
Specifications
| Length | 2.2 in |
| Width | 2.2 in |
| Height | 0.1 in |
| Weight | 0.01 lbs |
| Warranty | LLW |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Item#:
JRR07528
Manufacturer Item:
JRR07528
Your Price:
7.69
Each
Retaining rings are used to help secure sockets onto drive tools. They are not intended to bear any load. The rotational forces are between the drive tool and the socket. Designed with a resin crush gauge to help identify when to replace worn sockets. The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced. Drive tool and socket should line up when in use and should not pinch the crush gauge. Cracked sockets and or worn drive tools cause each other to turn excessively in relation to each other. This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced. One piece construction, no loose parts. Pin is made of resin which allows the material to compress without breaking.
Features
- Retaining rings are used to help secure sockets onto drive tools They are not intended to bear any load The rotational forces are between the drive tool and the socket The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced Drive tool and socket should line up when in use and should not pinch the crush gauge Cracked sockets and/or worn drive tools cause each other to turn excessively in relation to each other. This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced One-piece construction, no loose parts. Pin is made of resin which allows the material to compress without breaking Part numbers are embossed on the rings near the point at which the pin and ring meet
Specifications
| Length | 2 in |
| Width | 2 in |
| Height | 0.2 in |
| Weight | 0.01 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Item#:
JRR07526
Manufacturer Item:
JRR07526
Your Price:
6.19
Each
Features
- Retaining rings are used to help secure sockets onto drive tools
- They are not intended to bear any load
- The rotational forces are between the drive tool and the socket
- The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced
- Drive tool and socket should line up when in use and should not pinch the crush gauge
- Cracked sockets and or worn drive tools cause each other to turn excessively in relation to each other. This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced
- One-piece construction, no loose parts. Pin is made of resin which allows the material to compress without breaking
- Part numbers are embossed on the rings near the point at which the pin and ring meet
Specifications
| Length | 1.8 in |
| Width | 1.8 in |
| Height | 0.2 in |
| Weight | 0.01 lbs |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Item#:
JRR07523
Manufacturer Item:
JRR07523
Your Price:
6.49
Each
Features
- Retaining rings are used to help secure sockets onto drive tools
- They are not intended to bear any load
- The rotational forces are between the drive tool and the socket
- The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced
- Drive tool and socket should line up when in use and should not pinch the crush gauge
- Cracked sockets and/or worn drive tools cause each other to turn excessively in relation to each other. This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced
- One-piece construction, no loose parts. Pin is made of resin which allows the material to compress without breaking
- Part numbers are embossed on the rings near the point at which the pin and ring meet
Specifications
| Length | 2.4 in |
| Width | 2.4 in |
| Height | 0.2 in |
| Weight | 0.01 lbs |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Item#:
JRR07532
Manufacturer Item:
JRR07532
Your Price:
6.49
Each
Features
- 6-in-1 single-ended impact socket with hands free adjustment between socket sizes
- Alignment slot to tighten and loosen most pole hardware
- Two coaxial spring-loaded sockets in one tool
- Includes 3/4-Inch, 13/16-Inch, 1-Inch and 1-1/8-Inch square socket sizes plus a 7/16-Inch hex quick-change adapter
- Works on 1/2-Inch, 5/8-Inch and 3/4-Inch pole hardware
- 13/16-Inch diameter, 6-Inch (15 cm) long hollow shaft allows use on long threaded bolts
- Cross hole design to prevent unintentional separation of adapter and socket
- Engineered for use with impact drivers
- Color coded with double lines to identify size and slotted feature
- Replacement adapter is available (Cat. No. NRHDA4)
- Large and Small Slots; Hands-free Adjustment
Specifications
| Number of Points | 4 |
| Application | Pole Hardware Installation and Removal |
| Socket Size | 3/4", 13/16", 1", 1-1/8" Square |
| Material | Steel |
| Standard | ASME B107.2 |
| Type | Impact Socket |
| Overall Length | 7" (17.8 cm) |
| Overall Height | 2" (5.1 cm) |
| Drive Size | 7/16" Hex, 1/2" Square |
| Overall Width | 2" (5.1 cm) |
| Height | 2.0000 in |
| Width | 2.0000 in |
| Depth | 9.1000 in |
| Weight | 2.2600 lbs |
Your Price:
239.99
Each
Features
- 7/16-Inch hex quick-change adapter
- Improved ball detent on socket adapter
- Black finish for rust resistance
- For use with Klein Tools' Impact Socket
Specifications
| Drive Size | 7/16" |
| Socket Size | 7/16" |
| Overall Length | 4.906" (12.5 cm) |
| Height | 1.0000 in |
| Width | 3.0000 in |
| Depth | 5.0000 in |
| Weight | 0.3600 lbs |
Your Price:
57.29
Each
Features
- PH #1 & SL 3/16 in
- SQ #2 & SQ #1
- ECX™ Bits for electrical fasteners
- Most common bit sizes included
- Durable steel construction
- Compatible with Milwaukee® 13 in 1 Cushion Grip Screwdriver
- Compatible with Milwaukee Multi-Functional Screwdrivers
- Engraved markings for quick identification
- Limited Lifetime Warranty
Specifications
| Color / Finish | Black |
| Material | Steel |
| Diameter | 3/16 in |
| Length | 0.3 Inches |
| Bit Design | Combination |
| Brand / Model Compatibility | 48-22-2880 |
| Package Contents | (4) Replacment Bits; (1) Bit Holder |
| Package Quantity | 5 |
Item#:
48-22-2111
Manufacturer Item:
48-22-2111
Your Price:
14.99
Each
Features
- Durable
- Easy to adjust
- Performs flawlessly under tough situations
- Many parts interchange with other manufacturers' pipe wrenches
Specifications
| Pipe capacity | 5" |
| Weight | 20-9/25 |
| Height | 31.5 in. |
| Length | 1.81 in. |
| Width | 5.5 in. |
| Weight | 17.9 lbs |
| Warranty | Limited Lifetime |
Item#:
02836
Manufacturer Item:
02836
Your Price:
119.99
Each
Features
- Durable
- Easy to adjust
- Performs flawlessly under tough situations
- Many parts interchange with other manufacturers' pipe wrenches
Specifications
| Pipe capacity | 3" |
| Weight | 9-13/50 |
| Height | 21.75 in. |
| Length | 1.65 in. |
| Width | 4.3 in. |
| Weight | 8 lbs |
| Warranty | Limited Lifetime |
Item#:
02824
Manufacturer Item:
02824
Your Price:
54.99
Each
Specifications
| Length | 7.1 in |
| Width | 4.6 in |
| Height | 1.8 in |
| Weight | 1.158 lbs |
Item#:
33-430ST
Manufacturer Item:
33-430ST
Your Price:
18.99
Each
Features
- Rugged, hand-impact driver turns rusted, frozen, or other stubborn screws, and easily reverses for tightening or loosening screws
- Includes 3/8-Inch (10 mm)-square-drive fitting adapter for 5/16-Inch hex bits and four assorted hex screwdriver bits (5/16-Inch (8 mm) and 1/2-Inch (13 mm) regular slotted tip, #2 and # 4 Phillips-tip)
- Can also be used on 3/8-Inch (10 mm) square-drive impact sockets
- Internal, spring-loaded, helical design transforms the impact of a hammer blow to up to 200 foot-pounds of shock torque
- Made in USA
- Constructed of high-grade alloy steel that has been heat treated for added strength
- Reclosable, seal-tight vinyl pouch with hang-up grommet
Specifications
| Weight | 2.2 lb (1.0 kg) |
| Included | Impact Driver; 4 Hex Bits; 3/8" (1 cm) Square Drive Fitting Adapter |
| Phillips Bits | #2, #4 |
| Nut Driver Sizes | 5/16" |
| Slotted Bits | 5/16" (7.9 mm), 1/2" (12.7 mm) |
| Overall Length | 10.6" (26.9 cm) |
| Replacement Parts | 70229 |
| Item Height | 2.5000 in |
| Item Width | 4.3000 in |
| Item Depth | 10.6000 in |
| Item Weight | 2.1500 lbs |
Your Price:
60.89
Each
Features
- Lanyard Hole - Safely secure hammer to wrist or stationary object
- No-Slip Grip - Vulcanized rubber handle for secure grip while striking
- Trademark Green Head - Hi-Vis, drop forged 46 HRC steel head endures the most demanding applications
- Unbreakable® Handle Technology: Steel core eliminates breaking during overstrikes
Specifications
| Length | 36.0 |
| Width | 7.28 |
| Height | 2.78 |
| Weight | 17.8 |
| Warranty | Lifetime |
| Face Diameter (In.) | 2-1/4 |
| Handle Length (In.) | 36 |
| Head Material | Drop Forged Steel |
| Head Weight (Lbs.) | 12 |
| Type | Sledge Hammer |
Item#:
21236
Manufacturer Item:
21236
Your Price:
174.59
Each
DEWALT introduces the new Multi-Level Workshop, a 4-level, mobile workstation ideal for transporting and storing large tools, as well as organizing hand tools, accessories, and other jobsite necessities. The Multi-Level Workshop allows contractors to roll over rough jobsite terrain right to up their work area. In one seamless movement users can open and extend the workshop for visible access to four levels of storage. This rolling workshop delivers 90 pounds of load capacity and 22.5 gallons of storage space.
Features
- Single pull-up latch for quick and easy opening
- Reinforced Telescopic, Metal Pull Handle for easy maneuvering and comfortable hold
- Heavy-duty wheels for easy steering on job-site
- Ball Bearing Slides for smooth opening
- Creates Workstation for storage of large tools in bottom bin, organization of small parts in middle compartments, and top tool box
Specifications
| Length | 21.5 in |
| Width | 16.2 in |
| Height | 28.8 in |
| Weight | 27.75 lbs |
| Battery Test Summary | DEWALT_UN38.3 LITHIUM TEST SUMMARY_rev1,10.pdf |
| Warranty | LLW |
| Claims Needed | No |
| Weight Capacity | 88 Lbs |
| Wheel Qty | 2 |
| Product Finish | Black | Yellow |
Item#:
DWST20880
Manufacturer Item:
DWST20880
Your Price:
105.99
Each
Features
- Same features as cast iron models, but weighs 40% less
- Rugged construction
- Easy-to-adjust
- Durable epoxy powder-coated finish
- Exceeds government specification GGG651 Type II, Class C
- Black/Silver color
Specifications
| Height | 12.75 in. |
| Length | 1.35 in. |
| Width | 3 in. |
| Weight | 2.08 lbs |
| Warranty | Limited Lifetime |
Item#:
1337773
Manufacturer Item:
1337773
Your Price:
39.99
Each
Features
- Grime guard™ industry's first blade wiper
- Heavy duty metal frame
- 3:1 Reinforced planetary gears
- Nylon coated steel blade
- 100 ft. folding hook
Specifications
| Blade Material | Steel |
| Case Design | Closed Reel |
| Gear Ratio | 3:1 |
| Measuring Format | SAE |
| Tape Length | 100.0 ft |
| Tape Width | 0.375 in |
| Belt Clip | No |
| Color / Finish | Black/Red |
| Housing Material | Plastic |
| Lockable | No |
Item#:
48-22-5101
Manufacturer Item:
48-22-5101
Your Price:
24.99
Each
Features
- 72 Teeth Ratcheting Box End Needs As Little As 5° to Move Fasteners Versus 30° for Standard Box End Wrenches
- Surface Drive® on Box End Provides Off-Corner Loading for Better Grip and Reduced Fastener Rounding
- Flexible Head
- Knurled Side Beam for Ratcheting Direction Indicator
Specifications
| UPC | 082171097003 |
| Foreign Trade Code | 8204110030 |
| Set Piece Count | 7 |
| Set Size Range Min | 3/8 |
| Set Size Range Max | 3/4 |
| UNSPSC_V7.0901 | Wrenches and drivers |
| SAE/Metric/Torx | SAE |
| Drive Type | 12 Point |
| Set | Yes |
Item#:
8906729
Manufacturer Item:
8906729
Your Price:
95.49
Each
The Milwaukee 6 in. measuring wheel was designed for extreme durability, increased ergonomics, and productivity. Constructed of reinforced aluminum frames and reinforced folding joints, the Milwaukee measuring wheels are able to withstand the toughest jobsite conditions. Durable locking pivot points help quickly fold the units for transportation and storage. The pistol grip handles, designed to provide similar ergonomics to that of a power tool handle, fitting the hand of the user better than other wheels on the market. These handles feature a top brake function that can be used to 'lock' the wheel and the reading, increasing accuracy. The Milwaukee 6 in. measuring wheel can be easily folded down to a compact 18 in. which allows for easier transport and versatility.
Features
- Top break function
- Reinforced locking pivot point
- Zero point indicator
- Ergonomic handle
- Locks when folded
- 0 to 10,000 ft.
Specifications
| Measuring Tool Type | Measuring Wheel |
| Color / Finish | Red/Black |
| Material | Aluminum |
| Measuring Format | SAE |
| SAE Inch Reading | Inch-by-inch (1/12th foot) |
| Measuring Range | 0-10,000 Ft. |
| Length | 19.0 Inches |
| Width | 8.0 Inches |
| Lockable | Yes |
Item#:
48-22-5006
Manufacturer Item:
48-22-5006
Your Price:
69.29
Each
Features
- State-of-the-art, dual-material Journeyman™ handles provide a better grip without sacrificing tool strength and durability
- Treated steel for long term torsion resistance and rust prevention
- Double ended hex key is adaptable for working in tight spaces or high torque applications
- Easy size identification with markings on top of every handle
- Metal stand keeps tools organized and has open slot for additional T-Handle storage
- 9-Inch Blades in 10 sizes: 3/32-Inch, 7/64-Inch, 1/8-Inch, 9/64-Inch, 5/32-Inch, 3/16-Inch, 7/32-Inch, 1/4-Inch, 5/16-Inch, 3/8-Inch
Specifications
| Included | T-Handle Hex Key Set; Stand |
| Blade Length | 9" (22.9 cm) |
| End | Chamfered |
| Size | 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" |
| Measurement Standard | SAE |
| Number of Pieces | 10 |
| Height | 2.0250 in |
| Width | 11.1380 in |
| Depth | 11.2500 in |
| Weight | 3.5600 lbs |
Your Price:
57.19
Each
Item#:
4090-0305
Manufacturer Item:
VN11220 / R999ML
Your Price:
49.89
Each
Our team of experts is continually trained for the most up-to-date technology available on the field. So, If you have any questions about what cordless power tool would work best for your application, we have an answer. Simply call us at 1-888-595-4411 or fill out our contact form above. We are here to help you get the job done right.
