S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Hand Tools
Features
- Standard length for most applications, fits over long bolts and studs
- Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
- Internal flanges provide solid, twist-resistant shaft anchor
- Premium chrome plated for smooth feel and corrosion resistance
- Made in USA
- Meets or exceeds applicable ASME / ANSI specifications
- Handle end is also color coded for easy identification
- Cushion-Grip™ handle allows for greater torque and comfort
- Tip-Ident® quickly identifies nut driver and size
Specifications
| Shaft Length | 3" (7.6 cm) |
| Color Code | Yellow |
| Magnetic | No |
| Insulated | No |
| Material | Steel |
| Overall Length | 6.75" (17.2 cm) |
| Nut Driver Sizes | 5/16" |
| Handle Material | Rubber |
| Application | Bolt Applications |
| Measurement Standard | SAE |
| Height | 0.9000 in |
| Width | 2.3670 in |
| Depth | 6.7500 in |
| Weight | 0.2000 lbs |
Item#:
630-516
Manufacturer Item:
630-516
Your Price:
11.45
Each
Features
- 11 ft. blade standout
- BladeArmor coating for 10X blade life
- Mylar polyester film extends life of entire blade
- Tru-zero end hook for accurate measurements
Specifications
| Length | 7.1 in |
| Width | 4.6 in |
| Height | 2.3 in |
| Weight | 0.96 lbs |
| Power Source | NON-ENERGY USING |
| Battery Test Summary | STANLEY_UN38.3 LITHIUM TEST SUMMARY_Rev_1,2.pdf |
| Accuracy | ±1/16 in. |
| Blade Width | 1.25 |
| Standout | 11 Ft |
| Product Primary Material | Metal |
Item#:
33-716
Manufacturer Item:
33-716
Your Price:
24.99
Each
Features
- Polymer-coated blade withstands abrasion
- Durable key ring makes it easy to take anywhere
- Convenient and lightweight
- Reads both inches and Feet
Specifications
| Length | 5.9 in |
| Width | 2.8 in |
| Height | 0.6 in |
| Weight | 0.09 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Battery Test Summary | STANLEY_UN38.3 LITHIUM TEST SUMMARY_Rev_1,2.pdf |
| Warranty | 1YW |
| Claims Needed | No |
| Belt Clip | No |
| Blade Length | 36 In |
| Blade Width | 0.25 |
| Housing Material | ABS |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Lockable | Yes |
| Magnetic | No |
| Measuring Tool Type | Tape Measure |
| Self Adhesive | No |
| Unit Of Measure | SAE |
Item#:
39-130
Manufacturer Item:
39-130
Your Price:
4.29
Each
Features
- Satin finish provides corrosion resistance and a slip resistant grip 12 point box end allows for fine indexing, helping to improve speed and access. Fits 4, 6 and 12 point fasteners Anti-Slip Design (ASD) open end Fractional sizes 11/32" and smaller and sizes 1-5/16" and larger do not have the ASD feature Box ends incorporate the TorquePlus system
Specifications
| Length | 17.8 in |
| Width | 2.6 in |
| Height | 1.2 in |
| Weight | 2.03 lbs |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Size (String) | 1 5/16 in |
| Unit Of Measure | SAE |
Item#:
J1242
Manufacturer Item:
J1242
Your Price:
80.59
Each
Item#:
MT64933403L
Manufacturer Item:
MT64933403L
Your Price:
2.99
Each
Features
- The SHOCKWAVE™ lineman's J hook socket is engineered to be the easiest way to remove J hooks from wooden utility poles
- The quick insert slot geometry allows for the easiest set up on the hardware
- Hardware hook reduces hardware drops
- Rounded edges for safer hardware removal
- Designed for use with J hook style service hooks
- Can be used to install with a pre-drilled hole
- 7/16 in. to 1/2 in. lineman's impact socket adapter included
- 1/2 in. square drive
- Features a pin detent hole for locking onto pin detent tools and adapters
Specifications
| Color / Finish | Black |
| Color Coded | No |
| Deep Well | Yes |
| Drive Size | 1/2 in |
| Etched / Stamped Size Identification | Yes |
| Impact or Standard | Impact |
| Length | 3.02 Inches |
| Internal Depth | 2.5 in |
| Material | Chromoly Steel |
| Unit of Measurement | Inch |
| Socket Points | Not Applicable |
| Size | 7/16 in |
| Set / Individual | Individual |
| ASTM F1505-01 Compliant | No |
| IEC 60900 Compliant | No |
| NFPA 70E Compliant | No |
Item#:
49-66-5132
Manufacturer Item:
49-66-5132
Your Price:
52.01
Each
Milwaukee® 1000V insulated screwdrivers are the only UL® classified insulated screwdrivers. Tested to IEC 60900:2012, ASTM F1505-10 & nape 70E standards, Milwaukee insulated screwdrivers are OSHA approved and provide an uncompromising safety rating. Milwaukee insulated screwdrivers are flame and impact resistant and feature a dual layer insulation providing maximum protection and a visual wear indicator to issue a replacement warning to the user. Milwaukee insulated screwdrivers are designed for the jobsite and include Milwaukee's Limited Lifetime Warranty.
Features
- UL® classified - only Milwaukee® offers UL classified insulated screwdrivers
- 1000V insulated protection offers uncompromising safety
- OSHA approved: tested and certified to insulated tool standards - IEC 60900:2012 ; ASTM F1505-10; nape 70E
- VDE & GS certified
- Dual layer insulation offers visual wear indication for tool replacement
- Flame retardant & impact resistant handle and shank
- Lanyard holes prevent tool drops and protect insulation from damage
- Visible ID markings allows for quick tool identification on jobsite
Specifications
| Handle Length | 5.0 in |
| Handle Material | Polycarbonate |
| Handle Style | Straight |
| Length | 10.0 Inches |
| Color / Finish | Red/Black |
| Drive Size(s) | #1 & #2 Phillips, 1/4 & 3/8 Slotted |
| Electrical Accessory Type | Fastener |
| Kit | Yes |
| Material | Steel |
| Ratcheting | No |
| Drive Design | Combination |
| Size | 10.0 in |
| ASTM F1505-01 Compliant | Yes |
| IEC 60900 Compliant | Yes |
| NFPA 70E Compliant | Yes |
Item#:
48-22-2204
Manufacturer Item:
48-22-2204
Your Price:
63.99
Each
Our team of experts is continually trained for the most up-to-date technology available on the field. So, If you have any questions about what cordless power tool would work best for your application, we have an answer. Simply call us at 1-888-595-4411 or fill out our contact form above. We are here to help you get the job done right.
