S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Hand Tools
INKZALL® jobsite markers feature clog resistant tips and the ability to write through dusty, wet or oily surfaces. The durable marker tips are designed for writing on rough surfaces such as OSB, cinder block and concrete and the ink dries quickly to reduce smearing markings, without drying out quickly when the cap is left off. For added user convenience, the INKZALL® markers have a built-in hard hat clip for easy storage and access. INKZALL® markers confirm to Milwaukee's commitment to best-in-class durability and their relentless mission to provide innovative solutions to the end user.
Features
- Wear resistant tip - acrylic nib ideal for rough surfaces such as OSB, cinder block and concrete
- Quick dry time - reduced smearing markings on PVC, HVAC pipe and steel studs
- 72 Hour cap off life - leave the cap open for up to 72 hours without drying out
- Hard hat clip - attaches for easy access
- Anti-roll design - marker won't roll away without cap
- Writes through dusty, wet and oily surfaces
- ASTM D 4236 certified - non-toxic ink
- Durable marker tip for writing on concrete, OSB and rough surfaces
- Built-In hard hat storage clip
Specifications
| Marking Tool Category | Marker |
| Color / Finish | Red |
| Material | Plastic |
| Size | Fine Point |
| Package Quantity | 4 |
20% less effort required compared to conventional diagonal cutters of the same length. Forged-on axle for heavy-duty work. For very tough, continuous use. High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Precision cutting edges induction hardened (approx. 64 HRC) cut several types of wire including piano wire. 10" length suitable for copper conductors up to 16 mm² and aluminum conductors up to 35 mm². Chrome vanadium heavy-duty steel; forged, multi stage oil-hardened.
Features
- 20% less effort required compared to conventional diagonal cutters of the same length
- Forged-on axle for heavy-duty work
- For very tough, continuous use
- High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio
- Precision cutting edges induction hardened (approx. 64 HRC) cut several types of wire including piano wire
- 10" length suitable for copper conductors up to 16 mm² and aluminum conductors up to 35 mm²
- 12 angle head for hand clearance when cutting
- Chrome vanadium heavy-duty steel; forged, multi stage oil-hardened
Specifications
| 1000 Volt Insulated | No |
| Material Type | Chrome Vanadium Heavy-Duty Steel, Forged, Multi Stage Oil-Hardened |
| Handle Type | Plastic Coated |
| Surface Finish | Polished |
| Joint Type | Forged-in axle joint |
| Cutting Edge HRC | Cutting Edge HRC 64 |
| Cutting Capacity - Medium Hard Wire (Nail) | 3/16" |
| Cutting Capacity - Piano Wire | 1/8" |
| Cutting Capacity - Hard Wire (Steel Wire) | 9/64" |
| Angled Head | 12 degree |
INKZALL™ jobsite markers feature clog resistant tips and the ability to write through dusty, wet or oily surfaces. The durable marker tips are designed for writing on rough surfaces such as OSB, cinder block and concrete and the ink dries quickly to reduce smearing markings, without drying out quickly when the cap is left off. For added user convenience, the INKZALL™ markers have a built-in hard hat clip for easy storage and access. INKZALL™ markers confirm to Milwaukee's commitment to best-in-class durability and their relentless mission to provide innovative solutions to the end user.
Features
- Clog Resistant marker tip
- Writes through dusty, wet and oily surfaces
- Durable marker tip for writing on concrete, OSB and rough surfaces
- Built-in hard hat storage clip
- Medium point
- Ink dries in seconds
- Lanyard hole
- Anti-roll body design
- Non-toxic ink
Specifications
| Marking Tool Category | Marker |
| Color / Finish | Black |
| Material | Plastic |
| Size | Medium Tip |
| Package Quantity | 2 |
20% less effort required compared to conventional diagonal cutters of the same length. Forged-on axle for heavy-duty work. For very tough, continuous use. High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Precision cutting edges induction hardened (approx. 64 HRC) cut several types of wire including piano wire. 10" length suitable for copper conductors up to 16 mm² and aluminum conductors up to 35 mm². Chrome vanadium heavy-duty steel; forged, multi stage oil-hardened.
Features
- 20% less effort required compared to conventional diagonal cutters of the same length
- Forged-on axle for heavy-duty work
- For very tough, continuous use
- High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio
- Precision cutting edges induction hardened (approx. 64 HRC) cut several types of wire including piano wire
- 10" length suitable for copper conductors up to 16 mm² and aluminum conductors up to 35 mm²
- Chrome vanadium heavy-duty steel; forged, multi stage oil-hardened
Specifications
| 1000 Volt Insulated | No |
| Material Type | Chrome Vanadium Heavy-Duty Steel, Forged, Multi Stage Oil-Hardened |
| Handle Type | Plastic Coated |
| Surface Finish | Polished |
| Joint Type | Forged-in axle joint |
| Cutting Edge HRC | Cutting Edge HRC 64 |
| Cutting Capacity - Medium Hard Wire (Nail) | 3/16" |
| Cutting Capacity - Piano Wire | 1/8" |
| Cutting Capacity - Hard Wire (Steel Wire) | 9/64" |
Milwaukee INKZALL™ liquid paint markers were designed from the ground up to provide users with the best performance on tough jobsite surfaces. All INKZALL™ liquid paint markers feature a durable acrylic nib that can write on the dirtiest, hottest and roughest of surfaces. Proprietary paint developed specifically for INKZALL™ liquid paint markers can mark on surfaces up to 300F and dries in 10 seconds. For the most demanding environmental conditions, INKZALL™ liquid paint markers provide the longest lasting marks that are both water and UV resistant.
Features
- Writes on dirtiest, hottest, roughest surfaces
- Durable acrylic nib
- Water & UV resistant markings
- 10 Second dry time
- Marks on surfaces up to 300-degrees F
- Valve activated marker
Specifications
| Marking Tool Category | Marker |
| Color / Finish | Red/Yellow |
| Material | Plastic |
| Size | 6.09 In. |
| Package Quantity | 1 |
Milwaukee INKZALL™ liquid paint markers were designed from the ground up to provide users with the best performance on tough jobsite surfaces. All INKZALL™ liquid paint markers feature a durable acrylic nib that can write on the dirtiest, hottest and roughest of surfaces. Proprietary paint developed specifically for INKZALL™ liquid paint markers can mark on surfaces up to 300F and dries in 10 seconds. For the most demanding environmental conditions, INKZALL™ liquid paint markers provide the longest lasting marks that are both water and UV resistant.
Features
- Writes on dirtiest, hottest, roughest surfaces
- Durable acrylic nib
- Water & UV resistant markings
- 10 Second dry time
- Marks on surfaces up to 300-degrees F
- Valve activated marker
Specifications
| Marking Tool Category | Marker |
| Color / Finish | Red/Black |
| Material | Plastic |
| Size | 6.09 In. |
| Package Quantity | 1 |
Features
- High-visibility green is easy to find in a toolbox or work area
- Interlocking nose secures blade safely
- Heavy-duty metal body for durability
- Three-position retractable blade
Includes
- (3) STANLEY 1992 Utility Blades 11-921
Specifications
| Height | 0.900 IN |
| Length | 8.000 IN |
| Width | 2.000 IN |
| Weight | 0.361 LB |
| Type | UTILITY KNIVES |
| Battery Included | No |
| Charger Included (Y/N) | No |
| Net Lit-Ion Y/N | No |
| Warranty | 1YW |
| Piece Count | 1 |
Features
- Bolt Lock Technology - Blades will not loosen
- Chrome Plated for Rust Protection
- Large Handle Loops for Use with Gloves
- Index Finger Groove - Increased Control
- Ruler Markings on Blade - Measure and Cut
- 60% Offset Design - Keep hands above cutting material
- Designed for Right or Left-Handed Users
- All-Metal Core - Added Durability
- Cuts Common Jobsite Materials
- Limited Lifetime Warranty
Specifications
| Overall Length (in) | 9.3 |
| Blade Length (in) | 4.5 |
| Handle Length (in) | 4.5 |
| Color / Finish | Red/Gray |
| Blade Type | Smooth Edge |
| Type Of Scissor Blade | Coated Steel |
| Handle Type | Large Handle Loops |
| Handle Material | Steel |
| Sharpenable | No |
| Retractable Blade | No |
| Recommended Safety Equipment | Work Gloves |
