S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Concrete Mechanical Anchors
Features
- Corrosion-resistant
- Carbon steel wires for durability and strength
- Ergonomic bi-material handle
- Manufactured by DEWALT
Specifications
| Length | 7.25 in |
| Width | 1 in |
| Height | 1 in |
| Weight | 0.1 lbs |
| Warranty | None |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to a free edge than traditional expansion anchors
Specifications
| Weight | 0.208 lbs |
| Product Diameter Us | 3/8 IN |
| Power Source | NON-ENERGY USING |
| Connection Design | Concrete & Masonry |
| Fastener Length | 6 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Zinc |
| Product Primary Material | Carbon Steel |
Features
- High quality powder loads, designed for consistently and reliability
- Specific load types are designed for each caliber powder actuated tool
- They are offered as single cartridge units for single shot tools and also collated in groups of 10 into plastic strips for semi-automatic tools
- Manufactured by DEWALT
Specifications
| Weight | 0.002 lbs |
| Power Source | NON-ENERGY USING |
| Battery Required | No |
| Prop 65 Generic Warning | No |
| Hazmat Code | P1 |
| Compatibility | P1000, T1000, P2201 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Number Of Loads | 1 |
| Pat Booster Color | Green |
| Use With | Concrete |
| Product Primary Material | Brass |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to a free edge than traditional expansion anchors
Specifications
| Length | 5 in |
| Width | 7.2 in |
| Height | 2.9 in |
| Weight | 0.177 lbs |
| Product Diameter Us | 3/8 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 5 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Zinc |
| Product Primary Material | Carbon Steel |
Features
- Variety of head styles, lengths and sizes
- All steel component design
- Preassembled anchor for immediate installation
- Sleeve design keeps anchor centered in hole
Specifications
| Weight | 0.126 lbs |
| Product Diameter Us | 3/8 IN |
| Connection Design | Concrete Only |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
| Weight | 0.031 lbs |
| Product Diameter Us | 0.250000 IN |
| Power Source | NON-ENERGY USING |
| Connection Design | Concrete & Masonry |
| Design Type | Hex |
| Fastener Length | 1.75 |
| Fastener Plating | Zinc |
| Head Style | Hex Nut |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Thread Type | Standard |
| Product Finish | Silver |
| Product Primary Material | Carbon Steel |
Features
- General purpose anchoring
- Installs in a variety of base materials
- Roof Flashing
- Mechanical Attachments
Specifications
| Length | 1.5 in |
| Width | 1.5 in |
| Height | 1.5 in |
| Weight | 0.025 lbs |
| Product Diameter Us | 1/4 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Disclaimer | NULL |
| Prop 65 Generic Warning | No |
| Claims Needed | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 1.50 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Silver |
| Product Primary Material | Steel |
Features
- Corrosion-resistant
- Carbon steel wires for durability and strength
- Ergonomic bi-material handle
- Manufactured by DEWALT
Specifications
| Length | 5.75 in |
| Width | 1 in |
| Height | 1 in |
| Weight | 0.14 lbs |
| Warranty | None |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
| Weight | 1.055 lbs |
| Product Diameter Us | 0.750000 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Disclaimer | NULL |
| Claims Needed | No |
| Connection Design | Concrete & Masonry |
| Design Type | Hex |
| Fastener Length | 8.5 |
| Fastener Plating | Zinc |
| Head Style | Hex Nut |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Thread Type | Standard |
| Product Finish | Silver |
| Product Primary Material | Carbon Steel |
Features
- General purpose anchoring
- Installs in a variety of base materials
- Roof Flashing
- Mechanical Attachments
Specifications
| Weight | 0.022 lbs |
| Product Diameter Us | 0.25 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Disclaimer | NULL |
| Prop 65 Generic Warning | No |
| Claims Needed | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 1.25 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Silver |
| Product Primary Material | Steel |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to a free edge than traditional expansion anchors
Specifications
| Length | 4.6 in |
| Width | 6.5 in |
| Height | 2.9 in |
| Weight | 0.042 lbs |
| Product Diameter Us | 1/4 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Prop 65 Generic Warning | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 2.25 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Zinc |
| Product Primary Material | Carbon Steel |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
Specifications
| Weight | 0.046 lbs |
| Product Diameter Us | 1/4 IN |
| Connection Design | Concrete & Masonry |
| Fastener Length | 2.625 |
| Fastener Type | Mechanical Anchor |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to a free edge than traditional expansion anchors
Specifications
| Length | 3.9 in |
| Width | 5.6 in |
| Height | 2.6 in |
| Weight | 0.034 lbs |
| Product Diameter Us | 1/4 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Prop 65 Generic Warning | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 1.75 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Zinc |
| Product Primary Material | Carbon Steel |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to a free edge than traditional expansion anchors
Specifications
| Height | 2.6 in |
| Length | 3.9 in |
| Width | 5.6 in |
| Weight | 0.028 lbs |
| Product Diameter Us | 1/4 IN |
| Power Source | NON-ENERGY USING |
| Connection Design | Concrete & Masonry |
| Fastener Length | 1.25 |
| Fastener Type | Mechanical Anchor |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
Features
- Corrosion-resistant
- Carbon steel wires for durability and strength
- Ergonomic bi-material handle
- Manufactured by DEWALT
Specifications
| Length | 1 in |
| Width | 5.75 in |
| Height | 1 in |
| Weight | 0.148 lbs |
| Warranty | None |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to a free edge than traditional expansion anchors
Specifications
| Length | 3.9 in |
| Width | 5.6 in |
| Height | 2.5 in |
| Weight | 0.078 lbs |
| Product Diameter Us | 3/8 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 1.75 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Zinc |
| Product Primary Material | Carbon Steel |
The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
Features
- Designed for standard ANSI tolerance drill bits
- Patented thread design offers toughened threads for tapping high strength concrete
- Low installation torque in concrete and masonry
- Universal product for concrete and grouted/solid masonry
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to a free edge than traditional expansion anchors
Specifications
| Length | 5 in |
| Width | 7.2 in |
| Height | 2.9 in |
| Weight | 0.051 lbs |
| Product Diameter Us | 1/4 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Prop 65 Generic Warning | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 3 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Silver |
| Product Primary Material | bright zinc-plated and mechanically galvanized |
CSI Spiral Drive Pins are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with an 8mm head and 0.157" diameter shank in various lengths. A spiral knurled shank design provides consistent optimized performance in steel base materials. For single fasteners, a plastic washer is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide centered guidance during the driving operation. The fasteners are also available in collated strips.
Features
- Manufactured with an 8mm head and 0.157" diameter shank in various lengths
- Spiral knurled shank design provides consistent optimized performance in steel base materials
- Permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel
- Qty: 100
Specifications
| Weight | 0.006 lbs |
| Product Diameter Us | 1.06 IN |
| Battery Required | No |
| Prop 65 Generic Warning | No |
| Connection Design | Concrete & Masonry |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Pins/Rings/Clips Name | Safety Pin |
| Product Finish | Silver |
| Product Primary Material | Steel |
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
Specifications
| Weight | 0.75 lbs |
| Product Diameter Us | 0.750000 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Disclaimer | NULL |
| Prop 65 Generic Warning | Yes |
| Claims Needed | No |
| Connection Design | Concrete & Masonry |
| Design Type | Hex |
| Fastener Length | 5.5 |
| Fastener Plating | Zinc |
| Head Style | Hex Nut |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Thread Type | Standard |
| Product Finish | Silver |
| Product Primary Material | Carbon Steel |
Features
- General purpose anchoring
- Installs in a variety of base materials
- Roof Flashing
- Mechanical Attachments
Specifications
| Weight | 0.031 lbs |
| Product Diameter Us | 1/4 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Disclaimer | NULL |
| Prop 65 Generic Warning | No |
| Claims Needed | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 2 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Silver |
| Product Primary Material | Steel |
The UltraCon+ fastening system is a complete family of screw anchors for light to medium duty applications in concrete, masonry block, brick, and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for self-drilling into wood base materials without pre-drilling. The UltraCon+ screw anchor is available in carbon steel with a Stalgard coating in several colors. Head styles include a slotted hex washer head, Phillips flat head, Phillips Trimfit flat head and Hex flange head.
Features
- Available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
- No hole spotting required
Specifications
| Length | 1.25 in |
| Width | 0.188 in |
| Height | 0.001 in |
| Weight | 0.008 lbs |
| Product Diameter Us | 3/16 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Prop 65 Generic Warning | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 1.25 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Blue |
| Product Primary Material | Carbon Steel |
The UltraCon+ fastening system is a complete family of screw anchors for light to medium duty applications in concrete, masonry block, brick, and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for self-drilling into wood base materials without pre-drilling. The UltraCon+ screw anchor is available in carbon steel with a Stalgard coating in several colors. Head styles include a slotted hex washer head, Phillips flat head, Phillips Trimfit flat head and Hex flange head.
Features
- Available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
- No hole spotting required
Specifications
| Length | 1.75 in |
| Width | 0.188 in |
| Height | 0.001 in |
| Weight | 0.011 lbs |
| Product Diameter Us | 3/16 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 1.75 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Blue |
| Product Primary Material | Carbon Steel |
The UltraCon+ fastening system is a complete family of screw anchors for light to medium duty applications in concrete, masonry block, brick, and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for self-drilling into wood base materials without pre-drilling. The UltraCon+ screw anchor is available in carbon steel with a Stalgard coating in several colors. Head styles include a slotted hex washer head, Phillips flat head, Phillips Trimfit flat head and Hex flange head.
Features
- Available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
Specifications
| Length | 3.25 in |
| Width | 0.188 in |
| Height | 0.001 in |
| Weight | 0.018 lbs |
| Product Diameter Us | 3/16 IN |
| Connection Design | Concrete & Masonry |
| Fastener Length | 3.25 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Blue |
| Product Primary Material | Carbon Steel |
The UltraCon+ fastening system is a complete family of screw anchors for light to medium duty applications in concrete, masonry block, brick, and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for self-drilling into wood base materials without pre-drilling. The UltraCon+ screw anchor is available in carbon steel with a Stalgard coating in several colors. Head styles include a slotted hex washer head, Phillips flat head, Phillips Trimfit flat head and Hex flange head.
Features
- Available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
Specifications
| Length | 2.25 in |
| Width | 0.188 in |
| Height | 0.001 in |
| Weight | 0.013 lbs |
| Product Diameter Us | 3/16 IN |
| Connection Design | Concrete & Masonry |
| Fastener Length | 2.25 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Blue |
| Product Primary Material | Carbon Steel |
The UltraCon+ fastening system is a complete family of screw anchors for light to medium duty applications in concrete, masonry block, brick, and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for self-drilling into wood base materials without pre-drilling. The UltraCon+ screw anchor is available in carbon steel with a Stalgard coating in several colors. Head styles include a slotted hex washer head, Phillips flat head, Phillips Trimfit flat head and Hex flange head.
Features
- Available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
Specifications
| Length | 2.75 in |
| Width | 0.188 in |
| Height | 0.001 in |
| Weight | 0.016 lbs |
| Product Diameter Us | 3/16 IN |
| Battery Required | No |
| Prop 65 Generic Warning | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 2.75 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Blue |
| Product Primary Material | Carbon Steel |
The UltraCon+ fastening system is a complete family of screw anchors for light to medium duty applications in concrete, masonry block, brick, and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for self-drilling into wood base materials without pre-drilling. The UltraCon+ screw anchor is available in carbon steel with a Stalgard coating in several colors. Head styles include a slotted hex washer head, Phillips flat head, Phillips Trimfit flat head and Hex flange head.
Features
- Available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
Specifications
| Length | 4 in |
| Width | 0.188 in |
| Height | 0.001 in |
| Weight | 0.022 lbs |
| Product Diameter Us | 3/16 IN |
| Connection Design | Concrete & Masonry |
| Fastener Length | 4 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Blue |
| Product Primary Material | Carbon Steel |
The UltraCon+ fastening system is a complete family of screw anchors for light to medium duty applications in concrete, masonry block, brick, and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for self-drilling into wood base materials without pre-drilling. The UltraCon+ screw anchor is available in carbon steel with a Stalgard coating in several colors. Head styles include a slotted hex washer head, Phillips flat head, Phillips Trimfit flat head and Hex flange head.
Features
- Available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
Specifications
| Length | 3.75 in |
| Width | 0.188 in |
| Height | 0.001 in |
| Weight | 0.02 lbs |
| Product Diameter Us | 3/16 IN |
| Connection Design | Concrete & Masonry |
| Fastener Length | 3.75 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Blue |
| Product Primary Material | Carbon Steel |
The UltraCon+ fastening system is a complete family of screw anchors for light to medium duty applications in concrete, masonry block, brick, and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for self-drilling into wood base materials without pre-drilling. The UltraCon+ screw anchor is available in carbon steel with a Stalgard coating in several colors. Head styles include a slotted hex washer head, Phillips flat head, Phillips Trimfit flat head and Hex flange head.
Features
- Available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
Specifications
| Length | 1 in |
| Width | 0.25 in |
| Height | 0.001 in |
| Weight | 0.013 lbs |
| Connection Design | Concrete & Masonry |
| Fastener Length | 1 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Blue |
| Product Primary Material | Carbon Steel |
The UltraCon+ fastening system is a complete family of screw anchors for light to medium duty applications in concrete, masonry block, brick, and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for self-drilling into wood base materials without pre-drilling. The UltraCon+ screw anchor is available in carbon steel with a Stalgard coating in several colors. Head styles include a slotted hex washer head, Phillips flat head, Phillips Trimfit flat head and Hex flange head.
Features
- Available in several head styles
Specifications
| Length | 1.75 in |
| Width | 0.25 in |
| Height | 0.001 in |
| Weight | 0.019 lbs |
| Product Diameter Us | 1/4 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Disclaimer | NULL |
| Prop 65 Generic Warning | No |
| Claims Needed | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 1.75 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Blue |
| Product Primary Material | Carbon Steel |
The UltraCon+ fastening system is a complete family of screw anchors for light to medium duty applications in concrete, masonry block, brick, and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for self-drilling into wood base materials without pre-drilling. The UltraCon+ screw anchor is available in carbon steel with a Stalgard coating in several colors. Head styles include a slotted hex washer head, Phillips flat head, Phillips Trimfit flat head and Hex flange head.
Features
- Available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
- No hole spotting required
Specifications
| Length | 2.25 in |
| Width | 0.25 in |
| Height | 0.001 in |
| Weight | 0.023 lbs |
| Product Diameter Us | 1/4 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Disclaimer | NULL |
| Claims Needed | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 2.25 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Blue |
| Product Primary Material | Carbon Steel |
The UltraCon+ fastening system is a complete family of screw anchors for light to medium duty applications in concrete, masonry block, brick, and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for self-drilling into wood base materials without pre-drilling. The UltraCon+ screw anchor is available in carbon steel with a Stalgard coating in several colors. Head styles include a slotted hex washer head, Phillips flat head, Phillips Trimfit flat head and Hex flange head.
Features
- Available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
- No hole spotting required
Specifications
| Length | 1.25 in |
| Width | 0.25 in |
| Height | 0.001 in |
| Weight | 0.015 lbs |
| Product Diameter Us | 0.25 IN |
| Power Source | NON-ENERGY USING |
| Battery Included | No |
| Net Lit-Ion Y/N | No |
| Charger Included | No |
| Disclaimer | NULL |
| Prop 65 Generic Warning | No |
| Claims Needed | No |
| Connection Design | Concrete & Masonry |
| Fastener Length | 1.25 |
| Individual Vs. Set (Syndigo) | INDIVIDUAL |
| Product Finish | Blue |
| Product Primary Material | Carbon Steel |
