S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Plumbing Tools
Plumbers need specific tools to work professionally and Kinnunen carries a wide selection from the top manufacturers. From unplugging a drain to plumbing a new commercial building, we have the plumbing tools that you need to get the job done right. Shop where you know you can get professional assistance fast, shop Kinnunen.We have trained product specialists available to answer your plumbing questions and help you choose the best plumbing tools for your needs. Call us today at 1-800-432-8979 or fill out our contact form.
Features
- Lubricates and seals all threaded joints
- White, non-hardening, non-separating, non-toxic paste
- For use with water, steam, caustics or diluted acid lines
- Withstands up to 3,000 psi on gases from -50°F to 400°F, and 10,000 psi on liquids from -50°F to 500°F
- Can be used with plastic and metal threads
- Brush top applicator included
- Non-toxic, non-staining formula
- Allows for easy
Specifications
| Weight | 0.1 |
| Volume | 0.01 |
Item#:
31229
Manufacturer Item:
31229
Your Price:
3.45
Each
Features
- Maximum working pressure of 125 PSI
- Rising stem for positive open and close operation
- Six-point cast-iron handle
- 3/4-in hose thread outlet
- Rust-resistant handle
- Inlet threads comply with ANSI B1.20.1
- Hose Threads comply with ANSI B1.20.7
Specifications
| Length | 2.25 Inches |
| Weight | 0.45 LBS |
| Width | 2.13 Inches |
Item#:
102-104
Manufacturer Item:
102-104
Your Price:
9.99
Each
Features
- Couplings fit Schedule 40 iron or PVC pipe
- Corrosion free when either above or below ground, ideal connecting pipe of dissimilar metals.
- The compressive action of the threaded cap creates concentrated pressure at the 2-points.
- Double seal
- Easy installation
- Rated up to 150 PSI at 73°F
- NSF approved
- EPDM O-ring
- Fits both Schedule 40 and Schedule 80 pipe
Specifications
| Length | 6.1 Inches |
| Weight | 0.44 LBS |
| Width | 2.48 Inches |
Item#:
P600U-1
Manufacturer Item:
P600U-1
Your Price:
8.99
Each
Item#:
EPXPAE3410PK
Manufacturer Item:
EPXPAE3410PK
Your Price:
29.95
Each
Features
- Maximum working pressure of 125 PSI
- Rising stem for positive open and close operation
- Six-point cast-iron handle allows for easy operation
- 3/4-in hose thread outlet complies with ANSI B.1.20.7
- Male threads comply with ANSI B1.20.1
Specifications
| Length | 3.25 Inches |
| Weight | 0.35 LBS |
| Width | 2.25 Inches |
Item#:
102-003
Manufacturer Item:
102-003
Your Price:
6.99
Each
Features
- Clear cement solvent welds ABS, PVC and CPVC, dauber included
- For DWV, potable water and irrigation applications
- Medium viscosity easily fills gaps and provides more working time
- Can be used on all schedules and classes of ABS, PVC and CPVC pipe and fittings up to 6 in. diameter with interference fit
- Recommended application temperature of 40°F to 110°F / 4°C to 43°C
- All Oatey solvent cement and primer products are certified to UL Greenguard Gold
- Low VOC solvent cement that meets California South Coast Air Quality Management Districts (SCAQMD) 1168/316A or BAAQMD Method 40 requirements
- Meets ASTM Standards D2564, D2235 and F493, and complies with NSF/ANSI 61 health effects requirements
- Please refer to the Oatey Limited Warranty for warranty details
Specifications
| Color / Finish | Clear |
| Weight | 1.21 |
| Material | All-Purpose |
| Volume | 0.034 |
| Application Type | DWV Pipe |
| Maximum Use Temperature °C | 60 |
| Maximum Application Temperature °C | 43 |
| Maximum Application Temperature °F | 110 |
| Minimum Application Temperature °C | 4 |
| Minimum Application Temperature °F | 40 |
Item#:
30834
Manufacturer Item:
30834
Your Price:
17.65
Each
Features
- Clear cement solvent welds ABS, PVC and CPVC, dauber included
- For DWV, potable water and irrigation applications
- Medium viscosity easily fills gaps and provides more working time
- Can be used on all schedules and classes of ABS, PVC and CPVC pipe and fittings up to 6 in. diameter with interference fit
- Recommended application temperature of 40°F to 110°F / 4°C to 43°C
- All Oatey solvent cement and primer products are certified to UL Greenguard Gold
- Low VOC solvent cement that meets California South Coast Air Quality Management Districts (SCAQMD) 1168/316A or BAAQMD Method 40 requirements
- Meets ASTM Standards D2564, D2235 and F493, and complies with NSF/ANSI 61 health effects requirements
- Please refer to the Oatey Limited Warranty for warranty details
Specifications
| Color / Finish | Clear |
| Weight | 2.25 |
| Volume | 0.066 |
| Material | All-Purpose |
| Application Type | DWV Pipe |
| Maximum Use Temperature °C | 60 |
| Maximum Application Temperature °C | 43 |
| Maximum Application Temperature °F | 110 |
| Minimum Application Temperature °C | 4 |
| Minimum Application Temperature °F | 40 |
Item#:
30847
Manufacturer Item:
30847
Your Price:
24.89
Each
Oatey® PVC Heavy Duty Medium Set Clear Cement is recommended for DWV, pressure pipe, potable water and electrical applications. Its thick formula fills gaps in large diameter pipe and loose-fitting joints and is easy to apply with included in-lid dauber. This clear, low VOC, heavy duty, medium set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings with interference fit up to 18 in. diameter for non-pressure and 12 in. diameter for pressure pipes. Oatey products have earned the trust of plumbing professionals for over 100 years.
Features
- Clear cement solvent welds PVC pipe and fittings, dauber included
- For DWV, pressure pipe, potable water and electrical applications
- Thicker formula fills gaps for strong bond and easy application
- Can be used on all schedules and classes of PVC pipe and fittings with interference fit, up to 12 in. diameter for pressure and 18 in. for non-pressure pipes
- Recommended application temperature of 40°F to 110°F / 4°C to 43°C
- All Oatey solvent cement and primer products are certified to UL Greenguard Gold
- Low VOC solvent cement that meets California South Coast Air Quality Management Districts (SCAQMD) 1168/316A or BAAQMD Method 40 requirements
- Meets ASTM Standard D2564 and complies with NSF/ANSI 61 health effects requirements
- Please refer to the Oatey Limited Warranty for warranty details
Specifications
| Weight | 0.6 |
| Color / Finish | Clear |
| Material | PVC |
| Volume | 0.019 |
| Application Type | DWV Pipe |
| Maximum Use Temperature °C | 60 |
| Maximum Application Temperature °C | 43 |
| Maximum Application Temperature °F | 110 |
| Minimum Application Temperature °C | 4 |
| Minimum Application Temperature °F | 40 |
Item#:
30863
Manufacturer Item:
30863
Your Price:
14.29
Each
Features
- Fast-acting cleaner for ABS, PVC and CPVC pipe and fittings
- Removes surface dirt, oils and other contaminants from piping
- Clear in color, will not stain most surfaces
- Formulated for all schedules and diameters of ABS, PVC and CPVC pipe and fittings
- Clear finish flows freely and evaporates quickly
- Easy to apply with included in-lid dauber
- All Oatey solvent cement and primer products are certified to UL Greenguard Gold
- Low VOC cleaner that meets California South Coast Air Quality Management Districts (SCAQMD) 1168/316A or BAAQMD Method 40 requirements, and complies with NSF/ANSI 61 health effects requirements
- Please refer to the Oatey Limited Warranty for warranty details
Specifications
| Color / Finish | Clear |
| Weight | 1 |
| Volume | 0.034 |
| Material | Primer-Cleaner |
| Application Type | DWV Pipe |
| Maximum Use Temperature °C | 93 |
| Maximum Application Temperature °C | 43 |
| Maximum Application Temperature °F | 110 |
| Minimum Application Temperature °C | -26 |
| Minimum Application Temperature °F | -15 |
Item#:
30795
Manufacturer Item:
30795
Your Price:
15.99
Each
Item#:
69PTKH0014C
Manufacturer Item:
69PTKH0014C
Your Price:
74.29
Each
Features
- 600 PSI/150 WSP (working steam pressure)
- Temperature range of -40°F to 194°F
- Full port for maximum flow rate
- Packing gland blowout proof stem design
- PTFE discs and seats
- Chrome-plated brass ball and stem
- Rust-resistant heavy-duty handle with vinyl grip
- Threaded ends comply with ANSI B1.20.1
Specifications
| Length | 4.33 Inches |
| Weight | 0.2756 LBS |
| Width | 0.94 Inches |
Item#:
107-822-812NL
Manufacturer Item:
107-822-812NL
Your Price:
8.05
Each
Our team of experts is continually trained for the most up-to-date technology available on the field. So, If you have any questions about what cordless power tool would work best for your application, we have an answer. Simply call us at 1-888-595-4411 or fill out our contact form above. We are here to help you get the job done right.
